Adds an output parameter to disable PRIME synchronization.
Output parameter is created when the user calls 'xrandr
--setprovideroutputsource <sink> <source>' to prevent polluting output
parameters of non-PRIME configurations.
Defaults to on, so if the user wants PRIME synchronization they don't need
to do anything.
If the user wishes to disable PRIME synchronization when they first set up
PRIME, they can run 'xrandr --output <output> --set "PRIME Synchronization"
0' after running 'xrandr --setprovideroutputsource <sink> <source>', but
before 'xrandr --auto'.
If the user wishes to enable or disable PRIME synchronization after PRIME has
already been set up, they can run 'xrandr --output <output> --set "PRIME
Synchronization" <0 or 1>' at any time, xrandr will trigger a modeset, which
will tear down and setup PRIME in the configuration they requested on CRTCs
associated with that output.
randrstr.h:
Add central definition of the output property name.
rrcrtc.c:
Add function rrGetPixmapSharingSyncProp() to query the status of the
output property.
Add function rrSetPixmapSharingSyncProp() to set the output property.
Add 'sync' parameter to rrSetupPixmapSharing(), which when false will
use single buffering even if the required ABI functions are supported.
Changes rrSetupPixmapSharing() to only report an error if falling back
to single buffering when the user requested synchronization.
Change RRCrtcSet() to use rrPixmapSharingSyncProp() to query the status
of the output property and feed it into rrSetupPixmapSharing() using
the 'sync' parameter.
rrprovider.c:
Add RR(Init/Fini)PrimeSyncProps(), functions to create and destroy the
PRIME synchronization output property.
Add a call to RRInitPrimeSyncProps() in
ProcRRSetProviderOutputSource(), such that the output property is
created when the user requests PRIME.
Add a call to RRFiniPrimeSyncProps() in RRProviderDestroy().
v1: Initial commit
v2: Unchanged
v3: Add /* TODO */ for handling different sources with different outputs
Make rrSetupPixmapSharing() set the output property to 0 if it has to fall
back, to avoid user confusion.
Make rr(Get)PixmapSharingSyncProp() check the current value if there isn't a
pending value
v4: Unchanged
v5: Unchanged
v6: Rebase onto ToT
v7: Unchanged
Signed-off-by: Alex Goins <agoins@nvidia.com>
Changes PRIME to use double buffering and synchronization if all required
driver functions are available.
rrcrtc.c:
Changes rrSetupPixmapSharing() to use double buffering and
synchronization in the case that all required driver functions are
available. Otherwise, falls back to unsynchronized single buffer.
Changes RRCrtcDetachScanoutPixmap() to properly clean up in the case of
double buffering.
Moves StopPixmapTracking() from rrDestroySharedPixmap() to
RRCrtcDetachScanoutPixmap().
Changes RRReplaceScanoutPixmap() to fail if we are using double buffering,
as it would need a second ppix parameter to function with double buffering,
and AFAICT no driver I've implemented double buffered source support in uses
RRReplaceScanoutPixmap().
randrstr.h:
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME
double buffering.
xf86Crtc.h:
Adds current_scanout_back to _xf86Crtc to facilitate detection
of changes to it in xf86RandR12CrtcSet().
xf86RandR12.c:
Changes xf86RandR12CrtcSet() to detect changes in
scanout_pixmap_back.
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME double
buffering.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and
(rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec
Add fallback if flipping funcs fail
v4: Detach scanout pixmap when destroying scanout_pixmap_back, to avoid
dangling pointers in some drivers
v5: Disable RRReplaceScanoutPixmap for double-buffered PRIME, it would need an
ABI change with support for 2 pixmaps if it were to be supported, but AFAICT
no driver that actually supports double-buffered PRIME uses it.
Refactor to use rrEnableSharedPixmapFlipping() as a substitute for
rrCrtcSetScanoutPixmap() in the flipping case.
Remove extraneous pSlaveScrPriv from DetachScanoutPixmap()
Remove extraneous protopix and pScrPriv from rrSetupPixmapSharing()
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Adds typedefs for (*RRStartFlippingPixmapTrackingProcPtr),
(*RREnableSharedPixmapFlippingProcPtr),
and (*RRDisableSharedPixmapFlippingProcPtr) in randrstr.h.
Adds typedefs for (*PresentSharedPixmapProcPtr),
(*SharedPixmapNotifyDamageProcPtr),
(*RequestSharedPixmapNotifyDamageProcPtr), and
(*StopFlippingPixmapTrackingProcPtr) in scrnintstr.h.
Adds RR(Enable/Disable)SharedPixmapFlipping, and
RRStartFlippingPixmapTracking to rrScrnPrivRec.
Adds StopFlippingPixmapTracking, PresentSharedPixmap,
SharedPixmapNotifyDamage, and RequestSharedPixmapNotifyDamage to ScreenRec.
rrScrnPrivRec used for functions that use RandR-private data types, and
ScreenRec used for the rest.
RREnableSharedPixmapFlipping will allow the sink driver to setup for
flipping between two shared pixmaps.
RRDisableSharedPixmapFlipping will allow the sink driver to do teardown
associated with flipping between two shared pixmaps.
(RRStart/Stop)FlippingPixmapTracking are merely the double-buffered
equivalents of (Start/Stop)PixmapTracking, allowing the source driver to do
whatever setup and teardown necessary for presenting on the two shared
pixmaps.
PresentSharedPixmap is a function exposed by the source driver for the X
server or sink driver to call to request a present on a given shared
pixmap. This way, presents can be driven by the sink's vblank instead of a
timer or similar mechanism.
SharedPixmapNotifyDamage and RequestSharedPixmapNotifyDamage are OPTIONAL
(even for double-buffered PRIME) functions exposed by the sink driver and
the source driver, respectively. By calling
master->RequestSharedPixmapNotifyDamage(ppix), the sink driver can request
for the source driver to call slave->SharedPixmapNotifyDamage(ppix) in
response to damage on the master screen pixmap tracked by ppix.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
Add SharedPixmapNotifyDamage / RequestSharedPixmapNotifyDamage
v3: Add RRCrtcPtr as a parameter to StartFlippingPixmapTracking
Move functions that use RandR-private data types to rrScrnPrivRec.
v4: Unchanged
v5: Add front and back parameters to RREnableSharedPixmapFlippingProcPtr
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
In prime configurations master's last set time may not be latest
and greatest, adjust it with slaves last set time, pick up greatest
one. Otherwise xserver may end with events which has
lastSetTime < lastConfigTime even if that's not
the case and confuse xrandr client.
[hdegoede: rebase on "xrandrprovider: Do not use separate lists for unbound /
source / offload slaves"]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
RRScreenSizeNotify() will update the connection information block, but
if this occurs during initialization before ConnectionInfo is even
initialized, this will lead to a crash.
Simply check for ConnectionInfo prior to update it to avoid the crash.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95337
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
This was added in:
commit 312910b4e3
Author: Chase Douglas <chase.douglas@canonical.com>
Date: Wed Apr 18 11:15:40 2012 -0700
Update currentTime in dispatch loop
Unfortunately this is equivalent to calling GetTimeInMillis() once per
request. In the absolute best case (as on Linux) you're only hitting the
vDSO; on other platforms that's a syscall. Either way it puts a pretty
hard ceiling on request throughput.
Instead, push the call down to the requests that need it; basically,
grab processing and event generation.
Cc: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This lets clients know that the layout of the monitors on the screen
has changed so they can adapt appropriately.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Make sure we account for slave CRTCs when building the monitor list,
since that's what rrxinerama uses to fake Xinerama geometry.
[ajax: Slightly more informative commit message.]
Bugzilla: https://bugs.freedesktop.org/92313
Reviewed-by: Dave Airlie <airlied@redhat.com>
Otherwise, we leave a dangling reference to the destroyed pixmap in the
master screen's pixmap_dirty_list.
Fixes regression from commit cf5d6414 ("randr: Factor out shared pixmap
destruction").
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
protopix is completely redundant with mscreenpix. Get rid of it.
We don't need rrScrPriv, so remove it.
[ajax: also squash an unused variable in RRCrtcDetachScanoutPixmap,
though it'll come back when the rest of this series lands]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
The old version of rrCreateSharedPixmap(), in addition to actually creating
a shared pixmap with scanout, also set up pixmap tracking on the source
driver.
I will be needing to create multiple shared pixmaps for PRIME double
buffering, so factor the part that does shared pixmap creation into its own
function, the new rrCreateSharedPixmap(). Rename the old
rrCreateSharedPixmap() to rrSetupPixmapSharing(), a function that
replicates the old functionality of rrCreateSharedPixmap() using the new
rrCreateSharedPixmap().
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Shared pixmap destruction is done by unrefing the master pixmap twice: once
for the original reference, and once for the reference implicitly added by
PixmapShareToSlave. Then, unrefing the slave pixmap once.
When I add PRIME double buffering and synchronization, I will need to do
this in multiple places. To avoid duplication of code and comments
explaining it everywhere, factor it out into its own function and use that
in place of where it was before.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
We only set changes on the main protocol screen as, for example
in RRSetChanged() and RRTellChanged(), therefore we should follow
the same logic when reporting that an output changed in
RROutputChanged().
This means that RRTellChanged() will then update the relevant
timestamps also when events come from gpu screens.
[ajax: Fix mixed code and decls]
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alberto Milone <alberto.milone@canonical.com>
rrtransform.c:199:23: warning: shifting a negative signed value is undefined [-Wshift-negative-value,Semantic Issue]
rot_cos = F(-1);
^~~~~
rrtransform.c:114:14: note: expanded from macro 'F'
^~~~~~~~~~~~~~
../render/picture.h:200:24: note: expanded from macro 'IntToxFixed'
^~~~~~~~~~~~~~~~~~~~~~
/opt/X11/include/pixman-1/pixman.h:130:56: note: expanded from macro 'pixman_int_to_fixed'
~~~ ^
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
rrtransform.c:124:22: warning: using integer absolute value function 'abs' when
argument is of floating point type [-Wabsolute-value,Semantic Issue]
if ((v = abs(f_transform->m[j][i])) > max)
^
rrtransform.c:124:22: note: use function 'fabs' instead [Semantic Issue]
if ((v = abs(f_transform->m[j][i])) > max)
^~~
fabs
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xorg/xserver/randr/rrmonitor.c:35:5: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘RRCrtc’ [-Werror=format=]
RRCrtc is XID is CARD32, which inside the server is unsigned long or int
depending on architecture, so a cast is required.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
[ajax: To be clear, we already have code to emit these events, and it
looks like it works, but to get them you'd have had to also ask for one
of the other notify types. This makes it possible to listen for e.g.
ProviderChange alone.]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
As we define sizeFits based on whether a CRTC is active, and skip trying
to redirect the scanout on a disable pipe, we then attempt to undo it
later and fail because crtc->scanout_pixmap != DRI2_Pixmap and
!sizeFits. Paper over this failure by skipping unredirected CRTC when
disabling.
v2: Unwind upon failure
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84653
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Reported-by: Christoph Haag <haagch@frickel.club>
Tested-by: Christoph Haag <haagch@frickel.club>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This creates an automatic monitor for a tiled monitor at startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This replaces the CRTC-based Xinerama implementation with one which
uses Monitors instead, allowing clients to manipulate the Xinerama
configuration through the RandR Monitor list.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Store the user-defined monitors in the RandR screen private.
Generate a list of monitors from both the user-defined ones and from
any outputs not mentioned in one of the user-defined monitors. This list
covers both the outputs in the main screen as well as any slaves.
v1.1: airlied: fix up primary skipping bug,
fix wrong height initialiser
add get_active flag from updated protocol.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
In most of xserver code-base we define new functions at column 0, with
their return type provided on the previous line. Two functions did not
follow this rule so update them, and get them wrapped up to 80 as an
added bonus.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Also make use of total_name_len variable for consistency.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to make the code more readable, and the lines will
fit within 80 columns.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
To provide some information about the origin of the message.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
All of these seem like left over from developments stage. Remove them as
they can cause excessive flood in the logs.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Prevent RRXinerama from activating if PseudoramiX is, so we don't get XINERAMA
listed twice in the list of extensions. I think this is otherwise benign, as
the PseudoramiX XINERAMA gets registered first and thus handles all requests.
Perhaps AddExtension() ought to warn us if the extension name is already
registered?
This appears to be a long-standing bug seen in XQuartz, and now in XWin as well.
Future work: Perhaps since RRXinerama isn't actually doing anything useful but
faking it when we have one screen, it seems that the PseudoramiX code could be
also used in that case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
If the user wants to set one of the slave devices as
the primary output, we shouldn't fail to do so,
we were returning BadMatch which was tripping up
gnome-settings-daemon and bad things ensues.
Fix all the places we use primaryOutput to work
out primaryCrtc and take it into a/c when slave
gpus are in use.
v2: review from Aaron, fix indent, unhide has_primary from
macro. I left the int vs Bool alone to be consistent with
code below, a future patch could fix both.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88614
Signed-off-by: Carlos Sánchez de La Lama <csanchezdll@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
RRPointerToNearestCrtc is suppose to snap to the nearest Crtc,
but best_x and best_y is always positive, hence when calling
SetCursorPosition it will make the cursor even further away.
Correct delta x/y to allow negative values and also use
"width/height -1" in the calculation. Also choose the closest
Crtc by setting the "best" value.
Signed-off-by: David Ung <davidu@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Slaving two outputs on a secondary GPU to a primary GPU testing
picked this up, in that we'd try to resize to the totally the
wrong thing, then as usual segfault in the rotation code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
The protocol handlers all have support for swapping variable data and
replies, but the top-level dispatch plumbing was missing.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Both xRRSetProviderOutputSourceReq and xRRSetProviderOffloadSinkReq are
fixed-size requests, so the length on the wire should match exactly.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The previous code was checking the wrong table for function pointers.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The function RRCrtcSet call checks to see if the config being set is
already configured, but, doesn't check that the selected outputs are
connected to the crtc before skipping. This means that the following
sequence will omit the final CrtcSet call to the driver:
CRTC c1 connect to output o
CRTC c2 connect to output o
CRTC c1 connect to output o
This change adds the check to ensure that each of the calls are made to
the driver.
Signed-off-by: David Sodman <dsodman@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Don't use rrScrPriv for nested screen private fetching.
Eliminate a duplicate fetch of the randr screen private in rrCheckPixmapBounding.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Consider all attached output providers when looking for changed outputs and
crtcs.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Send RRResourceChangeNotify event when provider, output or crtc was created or
destroyed. I.e. when the list of resources returned by RRGetScreenResources and
RRGetProviders changes.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Send RRProviderChangeNotify event when a provider becomes output source or
offload sink.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't want to know about changes on the non-protocol screen,
we will fix up setchanged to make sure non-protocol screens update
the protocol screens when they have a change.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When SetChanged is called we now modify the main protocol screen,
not the the gpu screen. Since changed stuff should work at the protocol level.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Introduce a wrapper interface so we can fix things up for multi-gpu
situations later.
This just introduces the API for now.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
So in the cold plug server shutdown case, we reap the resources
before we call CloseScreen handlers, so the config->randr_provider
is a dangling pointer when the xf86CrtcCloseScreen handler is called,
however in the hot screen unplug case, we can't rely on automatically
reaped resources, so we need to clean up the provider in the xf86CrtcCloseScreen
case.
This patch provides a cleanup callback from the randr provider removal
into the DDX so it can cleanup properly, this then gets called by the automatic
code for cold plug, or if hot unplug it gets called explicitly.
Fixes a number of random server crashes on shutdown
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58174
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=891140
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
rrcrtc.c: In function 'RRCrtcDetachScanoutPixmap':
rrcrtc.c:366:9: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
rrcrtc.c: In function 'rrCheckPixmapBounding':
rrcrtc.c:505:13: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
rrcrtc.c:445:9: warning: unused variable 'i' [-Wunused-variable]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
When an RandR shared pixmap is created in rrCreateSharedPixmap, it has a refcnt
of 1. Then, PixmapShareToSlave bumps the refcnt to 2. However, there's no
corresponding PixmapUnshareFromSlave where the refcnt can be decreased again,
and there's no convenient common place where the refcnt can be decremented when
the slave pixmap is destroyed.
Fix this by just unreffing the pixmap twice in RRCrtcDetachScanoutPixmap.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No idea where this got lost across development cycles, but its
definitely missing.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=57448
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
These were added as part of commit 66d92afeae
but never declared or exported. Fixes warnings:
rrproviderproperty.c:255:1: warning: no previous prototype for 'RRPostProviderPendingProperties'
rrproviderproperty.c:327:1: warning: no previous prototype for 'RRConfigureProviderProperty'
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes the xinerama geometry when output slaves are enabled.
Tested with xdpyinfo -ext XINERAMA before after slave added.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reported by parfait 1.0:
Error: Memory leak (CWE 401)
Memory leak of pointer 'newModes' allocated with realloc(((char*)modes), ((num_modes + 1) * 8))
at line 93 of randr/rrmode.c in function 'RRModeCreate'.
pointer allocated at line 82 with realloc(((char*)modes), ((num_modes + 1) * 8)).
Error: Memory leak (CWE 401)
Memory leak of pointer 'newModes' allocated with malloc(8)
at line 93 of randr/rrmode.c in function 'RRModeCreate'.
pointer allocated at line 84 with malloc(8).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reported by parfait 1.0:
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with RRCreateOutputProperty(property)
at line 220 of randr/rrproperty.c in function 'RRChangeOutputProperty'.
'prop' allocated at line 154 with RRCreateOutputProperty(property).
prop leaks when pending != 0 at line 160.
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with RRCreateOutputProperty(property)
at line 346 of randr/rrproperty.c in function 'RRConfigureOutputProperty'.
'prop' allocated at line 334 with RRCreateOutputProperty(property).
at line 350 of randr/rrproperty.c in function 'RRConfigureOutputProperty'.
'prop' allocated at line 334 with RRCreateOutputProperty(property).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reported by parfait 1.0:
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with RRCreateProviderProperty(property)
at line 221 of randr/rrproviderproperty.c in function 'RRChangeProviderProperty'.
'prop' allocated at line 155 with RRCreateProviderProperty(property).
prop leaks when pending != 0 at line 161.
Error: Memory leak (CWE 401)
Memory leak of pointer 'prop' allocated with RRCreateProviderProperty(property)
at line 345 of randr/rrproviderproperty.c in function 'RRConfigureProviderProperty'.
'prop' allocated at line 333 with RRCreateProviderProperty(property).
at line 349 of randr/rrproviderproperty.c in function 'RRConfigureProviderProperty'.
'prop' allocated at line 333 with RRCreateProviderProperty(property).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
RandR 1.4 was going through review in parallel with main batch of
C99 initialization changes - sync up now that both have landed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
RandR 1.4 was going through review in parallel with main batch of
C99 initialization changes - sync up now that both have landed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds new function padding_for_int32() and uses existing pad_to_int32()
depending on required results.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Ensures padding bytes are zero-filled
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
pAtoms is only allocated if numProps was non-zero, so move the walk
through the property list to copy atoms to it inside the if (numProps)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
When passing variable pointers to functions or otherwise doing long
sequences to compute values for replies, create & use some new
temporary variables, to allow for simpler initialization of reply
structures in the following patches.
Move memsets & other initializations to group with the rest of the
filling in of the reply structure, now that they're not needed so
early in the code path.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
For DRI2 in some offload cases we need to set a new pixmap on the crtc,
this hook allows dri2 to call into randr to do the necessary work to set
a pixmap as the scanout pixmap for the crtc the drawable is currently on.
This is really only to be used for unredirected full screen apps in composited
environments.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the protocol handler and associated providers handling
for the offload slaves, it allows two providers to be connected as
offload sink/source.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
add the linked list and provider hooks.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the output sources to the associated list and adds the protocol
handler for the randr SetProviderOutputSource.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When the client asks for the screen resources list, it will now
get a list of crtc/outputs for the master + all attached slaves,
this will let randr configure all attached slave devices properly.
Keith asked I merge the two functions, but not just yet, the current
multi screen code doesn't handle primary yet properly, will fix it up later.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The master contains the complete screen size bounds, so check
the width/height against it.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tell changed need to tell only for the master pixmap,
however it gets called from various places for slave screens,
so convert to telling clients about changes on the master screen.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Current code constrains the cursor to the crtcs on the master
device, for slave outputs to work we have to include their crtcs
in the constrain calculations.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When randr notices a crtc configuration request for a slave device,
it checks if the slave allocated pixmap exists and is suitable,
if not it allocates a new shared pixmap from the master, shares
it to the slave, and starts the master tracking damage to it,
to keep it updated from the current front pixmap.
If the resize means the crtc is no longer used it will destroy
the slave pixmap.
This adds the concept of a scanout_pixmap to the randr_crtc object,
and also adds a master pixmap pointer to the pixmap object, along
with defining some pixmap helper functions for getting pixmap box/regions.
v2: split out pixmap sharing to a separate function.
v3: update for void *
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just add the interfaces to attach/detach output slaves, and
a linked list to keep track of them. Hook up the randr providers
list to include these slaves.
v1.1: add another assert to the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This provides the unattached provider list to the clients.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the initial provider object and provider property
support to the randr dix code.
v2: destroy provider in screen close
v2.1: fix whitespace
v3: update for latest rev of protocol + renumber after 1.4 tearout.
v4: fix logic issue, thanks Samsagax on irc
v5: keithp's review: fix current_role, fix copyrights, fix master
reporting crtc/outputs.
v6: port to new randr interface, drop all set role bits for now
v7: drop devPrivate in provider, not needed, add BadMatch returns
for NULL SetProviderOffloadSink and SetProviderOutputSource, drop
the old typedef.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
ProcRRGetScreenSizeRange uses REQUEST(xRRGetScreenSizeRangeReq) followed by
REQUEST_SIZE_MATCH(xRRGetScreenInfoReq). This happens to work out because both
requests have the same size, so this is not a functional change, just a cosmetic
one.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Ricardo Salveti <ricardo.salveti@linaro.org> found one place where the
randr code could use the randr screen private data without checking
for null first. This happens when the X server is running with
multiple screens, some of which are randr enabled and some of which
are not. Applications making protocol requests to the non-randr
screens can cause segfaults where the server touches the unset private
structure.
I audited the code and found two more possible problem spots; the
trick to auditing for this issue was to look for functions not taking
a RandR data structure and where there was no null screen private
check above them in the call graph.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix a seg fault in case pScrPriv is NULL at ProcRRGetScreenInfo,
which later calls RRFirstOutput.
Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
set but not used variables
shadowing a previous local
A hidden problem was that the VERIFY_RR_* macros define local 'rc'
variables, any other local definitions for those would be shadowed and
generate warnings from gcc. I've renamed the other locals 'ret'
instead of 'rc'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Call UpdateCurrentTimeIf(), not UpdateCurrentTime(), from RRTellChanged().
The latter calls ProcessInputEvents(), which can trigger a recursion
into mieqProcessInputEvents(). The former omits the call to
ProcessInputEvents().
Signed-off-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a squash merge containing all the API changes, as
well as the video ABI bump.
Its been squashed to make bisection easier.
Full patch log below:
commit b202738bbf0c5a1c1172767119c2c71f1e7f8070
Author: Aaron Plattner <aplattner@nvidia.com>
Date: Mon May 14 15:16:11 2012 -0700
xfree86: Bump video ABI to 13.0
The ABI was broken by changes to convert from screen index numbers to ScreenPtr
/ ScrnInfoPtr in various structures and function signatures.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d5f7d9f8d408bcad3f83277d255f25d3b0edbf3
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 10:56:57 2012 +0100
xf86: xf86ClearEntityListForScreen should take a pScrn
When adding GPU screens this make life easier.
(also fix comment, as pointed out by Alan)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit afee8b5ab4501597ecc1ade34124d7ca227ab055
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 07:07:32 2012 +0100
xf86i2c: add pscrn for drivers to use
This just adds a pScrn pointer into the struct for the drivers to use
instead of scrnIndex. Mostly scrnIndex is used for logging, but some
drivers use it to lookup xf86Screens, so let them stash a pScrn instead.
Removing the scrnIndex is a bit more involved and I'm not sure its worth
the effort. Doing i2c in the X server is legacy code as far as I'm concerned.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit ea5092f1f679691d187f1eee9427e6057beec56e
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 19:25:20 2012 +0100
dix/gc: consolidate GC object creation in one place
The standard GC create and scratch GC create were 90% the same really,
and I have a need in the future for creating GC objects without the
other bits, so wanted to avoid a third copy.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d91482ea9b4883e64e496f2768168e0ffa21ba1
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 10:24:06 2012 +0100
xf86: add a define to denote the new non-index interfaces are being used
This can be used by drivers to provide compatible APIs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 37c3ae3e6cd4f3dedc72f371096d6743f8f99df3
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 15:09:12 2012 +0100
dix: make Create/Free scratch pixmaps take a ScreenPtr
While technically an API/ABI change I doubt anyone uses it,
but it helps in splitting screens up.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 75f2062a3fe94f04764ecc7d2ff2fbbeccb9da60
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:57:55 2012 +0100
xf86/xv: remove scrnIndexfrom xf86FindXvOptions.
Move this interface to taking an ScrnInfoPtr.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit f80c2374f40ea7b2ee0556e2e76cc07406f3d843
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:53:59 2012 +0100
xf86: make xf86DeleteScreen take a ScrnInfoPtr (v2)
stop passing indices into this function.
v2: drop flags argument.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 58824e414f35682435f15bfe6c4b656bd90b9235
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:48:09 2012 +0100
xf86: fix xf86IsScreenPrimary interface to take a pScrn (API/ABI)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6b4fc1f9d391bcdf7ca288766e49bce60f4635cd
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:18:59 2012 +0100
xserver: convert block/wakeup handlers to passing ScreenPtr (ABI/API) (v2)
Instead of passing an index, pass the actual ScreenPtr. This allows
more moving towards not abusing xf86Screens + screenInfo.
v2: drop the blockData/wakeupData args as per ajax's suggestion.,
fix docs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 790d003de20fb47674420a24dadd92412d78620d
Author: Dave Airlie <airlied@gmail.com>
Date: Wed Apr 11 09:53:14 2012 +0100
xf86/common: remove some more pScrn->pScreen uses
remove some more conversions that appeared after api cleanups.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aac85e18d1dd093f2cad6bd29375e40bd7af0b8f
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:34:53 2012 +0100
ddc: change API to take ScrnInfoPtr (v2)
This removes all xf86Screens usage from ddc code,
it modifies the API for some functions to avoid taking indices.
v2: address Alan's comments about dropping DDC2Init parameter.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit fe3f57b6eaf6860a33876a54f9439f69578f03a5
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:31:26 2012 +0100
vbe: don't use index for VBEInterpretPanelID (API)
Remove use of xf86screens from vbe module.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit abf1965f4ed91529036d3fdb470d6a3ce6f29675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:25:11 2012 +0100
int10/vbe: don't use xf86Screens. (ABI) (v3)
Pass the ScrnInfoPtr instead of the index in the int10 struct.
This saves us using it to dereference xf86Screens.
v2: address Alan's comment to fix struct alignment.
v3: squash in all the int10 fixes, test the vm86 code builds,
after comments by Keith.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 23cca612b4fb5efc33683c7624b803b457387e3d
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:30:18 2012 +0100
xserver: drop index argument to ScreenInit (ABI/API) (v2)
This drops the index argument, its the same as pScreen->myNum,
and its the last major index abuse I can find.
v2: address Alan's review - update docs, fix xwin/xnest/darwin
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 40d360e2d7e832407f3ed64e3a02c27ecc89a960
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:23:01 2012 +0100
xf86: migrate PointerMoved from index to ScrnInfoPtr (ABI/API)
This migrates PointerMoved from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aa60a2f38679d0eeb979a9c2648c9bc771409bf9
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:20:46 2012 +0100
xf86: migrate PMEvent to a ScrnInfoPtr (ABI/API)
This migrates the PMEvent from index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d3f28ef44371ed4a039ffc5dd7eb6408d1269ba2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:18:30 2012 +0100
xf86: migrate SetDGAMode from index to ScrnInfoPtr (ABI/API)
This migrates the SetDGAMode callback from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit baf5e4818a74f2b68c3dfdcc56f54322351039a0
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:14:11 2012 +0100
xf86: migrate ChangeGamma from index to ScrnInfoPtr (ABI/API) (v2)
This migrates the ChangeGamma interface to avoid passing a index.
v2: fix xf86RandR12.c + xf86cmap.c call
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 51e5f90ada929d6b23176090badbb42fdb3fa550
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:11:09 2012 +0100
xf86/exa: migrate index to screen types for EnableDisableFBAccess (ABI/API)
The EXA interface migrates to ScreenPtr,
and the xf86 interface migrated to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 94f1f21d17e86f96d4a54292a399160950087675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:02:11 2012 +0100
xf86: migrate ValidMode callback to ScrnInfoPtr (ABI/API)
This migrates the ValidMode to passing a ScrnInfoPtr instead
of an index.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3f8f18198fed4f39ec805b508a3482e91eea26b2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:59:46 2012 +0100
xf86: migrate SwitchMode to taking ScrnInfoPtr (ABI/API) (v2)
This migrate the SwitchMode interface to take a ScrnInfoPtr
instead of an index.
v2: drop flags.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d06a038a5c49328ab3a8d969d24f9fcd22c63202
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:50:37 2012 +0100
xf86: move AdjustFrame to passing ScrnInfoPtr (ABI/API) (v2)
This converts AdjustFrame code paths to passing a ScrnInfoPtr
instead of an integer index.
v2: drop flags args.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 53d2f8608ffd4090d08e7d5cf2e92fb954959b90
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:41:27 2012 +0100
xf86: modify FreeScreen callback to take pScrn instead of index. (ABI/API) (v2)
Another index->pScrn conversion.
v2: drop flags arg.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 60db37c0b247052e0f5c54b1921fe58a3609c2e3
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:35:41 2012 +0100
xf86: change EnterVT/LeaveVT to take a ScrnInfoPtr (ABI/API break) (v2)
This modifies the EnterVT/LeaveVT interfaces to take a ScrnInfoPtr
instead of an index into xf86Screens. This allows dropping more
public dereferences of the xf86Screens and screenInfo.
v2: drop flags args as suggested by Keith, fix docs.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 06729dbbc804a20242e6499f446acb5d94023c3c
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:04:59 2012 +0100
xserver: remove index from CloseScreen (API/ABI breakage)
This drops the index from the CloseScreen callback,
its always been useless really, since the pScreen contains it.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Exposed by recent addition of -Wredundant-decls to default CWARNFLAGS
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
agoins
Nikhil Mahale
Hans de Goede
Olivier Fourdan
Dave Airlie
Adam Jackson
Keith Packard
Jan Burgmeier
Michel Dänzer
Alberto Milone
Jeremy Huddleston
Jon TURNEY
Michal Srb
Chris Wilson
Dave Airlie
Alan Coopersmith
Emil Velikov
Carlos Sánchez de La Lama
Peter Hutterer
David Ung
Robert Morell
David Sodman
Aaron Plattner
Yaakov Selkowitz
Daniel Stone
Jaroslav Šmíd
Ricardo Salveti de Araujo
Andy Ritger
Michal Suchanek