Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Also, no need to call ShowCursor when SetCursorPosition already does it
Based on a previous patch by Maarten Maathuis
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
When leaving 3D games such as quake3 or sauerbraten, a cursor may stay on the
screen. This is caused by one run of SW rendering for the SD, even though the
SD was attached to the VCP and thus has HW rendering capabilities.
Check for the SD's attachment (like in all other functions) before deciding on
SW or HW rendering.
X.Org Bug 16805 <http://bugs.freedesktop.org/show_bug.cgi?id=16805>
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Just ignore devices after MAXDEVICES has been reached, but warn the user that
the devices are ignored.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This is done to actually change DIX_CFLAGS, as not all "modules" use
XORG_CFLAGS.
Also export the symbols that are required by other modules after
the change.
- Remove remaining references to XFree86-Misc options AllowNonLocalModInDev
and DisableModInDev.
- Remove remaining references to grab-breaking keys & associated options.
- Update description of Ctrl-Alt-Backspace to new -retro/DontZap defaults.
- Add description of new options -modalias and -showopts.
- Update list of modules loaded by default.
- Update input driver references from keyboard to evdev & kbd.
- Update list of driver man pages to match xf86-*-* drivers with man pages.
- Add See Also section to exa man page.
and various formatting/typo/etc. fixes.
The Xorg/xorg.conf sections on input device selection could use further
updates to better match the current state of HAL-enabled configuration.
The warnings corrected were only the ones that should correct
real problems. The most common one is 64 bit integers as
"printf %l" arguments.
Note that there is a patch related to this at:
http://bugs.freedesktop.org/show_bug.cgi?id=18204
These symbols were removed from the X Server, or never declared.
One symbol that may need special attention is XkbBuildCoreState(),
that doesn't have a prototype anywhere, but is called from
xkb/xkbEvents.c:XkbFilterEvents(), and also used by the macros
XkbStateFieldFromRec() and XkbGrabStateFromRec() defined in
include/xkbstr.h.
fb/wfbrename.h also may need some cleanup, as it makes several
"renames" of non existing symbols.
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
This patch exports all symbols required by the compilable
(in a x86 linux computer) xorg/driver/* modules.
Still missing symbols worth mentioning are:
sunleo
miFindMaxBand no longer available
intel (uxa/uxa-accel.c)
fbShmPutImage no longer available (and should have been static)
mga
MGAGetClientPointer (should come from matrox's libhal)
This is not a definitive "visibility" patch, as all it does is to
export missing symbols, but the modules that current don't compile,
may require more symbols once fixed, and third party drivers should
also require more symbols exported.
A "definitive" patch should export symbols defined in the sdk.
../../../../hw/xfree86/xaa/xaaTables.c:9:14: warning: symbol 'byte_expand3' was not declared. Should it be static?
../../../../hw/xfree86/xaa/xaaTables.c:53:14: warning: symbol 'byte_reversed_expand3' was not declared. Should it be static?
The patch removes all macros in the format
define xf86_sym ((type (*)(argument-list))LoaderSymbol("sym"))
creates a new macro in the format
define xf86_sym sym
and ensures "sym" is a "visible" symbol.
The patch doesn't add or remove features, and is source and binary
compatible with previous shared objects (with the difference that it
requires the dlloader).
These symbols are a special case, as, due to the fact that LoaderSymbol
was being used to reference them, they are not easily found by "automated"
tools that check for missing symbols. And now it also have the benefit
that the compiler/loader "knows what is going on".
pixman 0.13.2 now holds all of the matrix operations. This leaves
the protocol conversion routines and some ABI stubs in place
Signed-off-by: Keith Packard <keithp@keithp.com>
Includes fixes for:
"xf86Config.c", line 2434: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 312: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "../../../hw/xfree86/common/xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 438: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
"xf86Modes.c", line 701: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
helper_exec.c: In function ‘port_rep_inb’:
helper_exec.c:219: warning: implicit declaration of function
‘DEBUG_IO_TRACE’
helper_exec.c:219: warning: nested extern declaration of
‘DEBUG_IO_TRACE’
Doing projective transforms required repositioning the cursor using the
hotspot, but that requires relocating the upper left corner in terms of said
hotspot.
Instead of using a separate function to notify DIX about transform changes,
add the transform to RRCrtcNotify so that the whole Crtc state changes
atomically.
RandR matrix computations lose too much precision in fixed point;
computations using the inverted matrix can be as much as 10 pixels off.
Convert them to double precision values and pass those around. These API
changes are fairly heavyweight; the official Render interface remains fixed
point, so the fixed point matrix comes along for the ride everywhere.
Add APIs to xf86RandR12 support and randr extension to record whether the
driver supports transforms, report that value in the RRGetCrtcTransform
reply.
New RRCrtcGetTransform function in DIX that DDX can use to get the pending
transform. The DDX code should be complete; the DIX code is just a stub at
this point.
Drivers that care about crtc positions on the screen to ensure that vblank
works correctly need to be notified when crtcs are changed.
Provide a hook in the mode setting code that is invoked whenever any
configuration is done to the screen.
Use this new hook in the DRI code so that DRI clients are notified and
receive updated information.
Signed-off-by: Keith Packard <keithp@keithp.com>
The xfree86 server previously hat NewInputDeviceRequest and InitInput, and
both basically did the same thing. Reduce NIDR to parameter checking and use
xf86NewInputDevice from both InitInput and NIDR to actually create the device.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When the linux kernel sets the NX bit vm86 segfaults when it tries to execute
code in memory that is not marked EXEC. Such code gets called whenever
we return from a VBIOS call to signal the calling program that the call
is actually finished and that we are not trapping for other reasons (like
IO accesses).
Use mprotect(2) to set these memory ranges PROT_EXEC.
There's little chance that we'll get the input devices at runtime without HAL,
we might as well force the server to add mouse/kbd devices automatically -
just like in the olden days.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
These values need not be constrained to integer values.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Matthias Hopf
Paulo Cesar Pereira de Andrade
Timo Aaltonen
Stuart Bennett
Peter Hutterer
Alan Coopersmith
Kristian Høgsberg
Jay Cotton
Maarten Maathuis
Julien Cristau
Keith Packard
Adam Jackson
Matthieu Herrb
Stefan Dirsch
Egbert Eich
Rémi Cardona
Michel Dänzer
Alex Deucher
Adam Jackson