Using the existing command line option "-listen" for passing file
descriptors between the Wayland compositor and Xwayland is misleading,
Xwayland should add is own command line option for that specific use.
As XWayland is spawned by the Wayland compositor, we cannot just change
the option, as that would break all existing Wayland compositors using
Xwayland, so we add a new options "-listenfd" and mark the previous one
as deprecated and log a warning, but it still works for backward
compatibility.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/214
Xwayland uses the command line option “-listen” to pass file descriptors
from the Wayland compositor.
That breaks the traditional, documented behavior of the “-listen”
command line option which is to enable a transport type.
Checks if the given option starts with a digit, otherwise treat it as a
regular transport type.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/817
Suggested-by: Rodrigo Exterckötter Tjäder
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
a2rgb10 configs would end up with channel masks corresponding to
argb8888. This would confuse the GLX core code into matching an a2rgb10
config to the root window visual, and that would make things look wrong
and bad.
Fix this by handling more cases. We're still not fully general here, and
this could still be wrong on big-endian. The XXX comment about doing
something less ugly still applies, ideally we would get this information
out of EGL instead of making lucky guesses. Still, better than it was.
Fixes: xorg/xserver#824
Hiding the tablet tool cursor results in it being hidden forever after.
This is due to the stale frame callback that will neither be disposed
or replaced. This can be reproduced in krita (X11) as the pointer
cursor is hidden while over the canvas.
Clearing the frame callback ensures the correct behavior in future
xwl_tablet_tool_set_cursor() calls (i.e. a new cursor surface being
displayed, and a new frame callback created), and is 1:1
with xwl_seat_set_cursor() for pointers.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
With `glamor_set_pixmap_texture()` returning its status, remove the hack
and use the return value.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The current code in `xwl_glamor_gbm_create_pixmap_for_bo()` may fail in
several cases that are not checked for:
- `eglCreateImageKHR()` may have failed to create the image,
- `glEGLImageTargetTexture2DOES()` may fail and set an error,
- `glamor_set_pixmap_texture()` may fail for very large pixmaps
because the corresponding FBO could not be created.
Trying to upload content to a pixmap with no texture will crash Mesa,
glamor and Xwayland, e.g.:
XXX fail to create fbo.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x29)
(EE) 1: libpthread.so.0 (funlockfile+0x50)
(EE) 2: libc.so.6 (__memmove_avx_unaligned_erms+0x215)
(EE) 3: dri/i965_dri.so (_mesa_format_convert+0xab3)
(EE) 4: dri/i965_dri.so (_mesa_texstore+0x205)
(EE) 5: dri/i965_dri.so (store_texsubimage+0x28c)
(EE) 6: dri/i965_dri.so (intel_upload_tex+0x13b)
(EE) 7: dri/i965_dri.so (texture_sub_image+0x134)
(EE) 8: dri/i965_dri.so (texsubimage_err+0x150)
(EE) 9: dri/i965_dri.so (_mesa_TexSubImage2D+0x48)
(EE) 10: Xwayland (glamor_upload_boxes+0x246)
(EE) 11: Xwayland (glamor_copy+0x4d1)
(EE) 12: Xwayland (miCopyRegion+0x96)
(EE) 13: Xwayland (miDoCopy+0x43c)
(EE) 14: Xwayland (glamor_copy_area+0x24)
(EE) 15: Xwayland (damageCopyArea+0xba)
(EE) 16: Xwayland (compCopyWindow+0x31c)
(EE) 17: Xwayland (damageCopyWindow+0xd3)
(EE) 18: Xwayland (miResizeWindow+0x7b7)
(EE) 19: Xwayland (compResizeWindow+0x3a)
(EE) 20: Xwayland (ConfigureWindow+0xa96)
(EE) 21: Xwayland (ProcConfigureWindow+0x7d)
(EE) 22: Xwayland (Dispatch+0x320)
(EE) 23: Xwayland (dix_main+0x366)
(EE) 24: libc.so.6 (__libc_start_main+0xf3)
(EE) 25: Xwayland (_start+0x2e)
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Check for the possible cases of failure above and fallback to the
regular glamor pixmap creation when an error is detected.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/661
Without this we're using driswrast to set up GLX visuals. This is
unfortunate because llvmpipe does not expose multisample configs, so
various apps that expect them will fail. With this we just query the
capabilities of the EGL that's backing glamor, and reflect that to the
GLX clients. This also paves the way for xserver to stop being a DRI
driver loader, which is nice.
Fixes: xorg/xserver#640Fixes: xorg/xserver#643
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98272
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
On pointer enter notification, Xwayland checks for an existing pointer
warp with a `NULL` sprite.
In turn, `xwl_pointer_warp_emulator_maybe_lock()` checks for an existing
grab and the destination window using `XYToWindow()` which does not
check for the actual sprite not being `NULL`.
So, in some cases, when the pointer enters the surface and there is an
existing X11 grab which is not an ownerEvents grab, Xwayland would crash
trying to dereference the `NULL` sprite pointer:
#0 __GI_raise ()
#1 __GI_abort () at abort.c:79
#2 OsAbort () at utils.c:1351
#3 AbortServer () at log.c:879
#4 FatalError () at log.c:1017
#5 OsSigHandler () at osinit.c:156
#6 OsSigHandler () at osinit.c:110
#7 <signal handler called>
#8 XYToWindow (pSprite=0x0, x=0, y=0) at events.c:2880
#9 xwl_pointer_warp_emulator_maybe_lock () at xwayland-input.c:2673
#10 pointer_handle_enter () at xwayland-input.c:434
Avoid the crash by simply checking for the sprite being not `NULL` in
`xwl_pointer_warp_emulator_maybe_lock()`
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.redhat.com/1708119
Commit d8ec33fe05 added libglxvnd.la to
Xwayland_LDFLAGS but GLX can be disabled through --disable-glx.
In this case, build fails on:
make[3]: *** No rule to make target '../../glx/libglxvnd.la', needed by 'Xwayland'. Stop.
make[3]: *** Waiting for unfinished jobs....
Fixes:
- http://autobuild.buildroot.org/results/397f8098c57fc6c88aa12dc8d35ebb1b933d52ef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
xwl_present_cleanup frees the struct xwl_present_window memory,
so if there's a pending callback, we have to destroy it to prevent
use-after-free in xwl_present_sync_callback.
Should fix issue #645.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Xwayland creates and destroys the CRTC along with the Wayland outputs,
so there is possibly a case where the number of CRTC drops to 0.
However, `xwl_present_get_crtc()` always return `crtcs[0]` which is
invalid when `numCrtcs` is 0.
That leads to crash if a client queries the Present capabilities when
there is no CRTC, the backtrace looks like:
#0 raise() from libc.so
#1 abort() from libc.so
#2 OsAbort() at utils.c:1350
#3 AbortServer() at log.c:879
#4 FatalError() at log.c:1017
#5 OsSigHandler() at osinit.c:156
#6 OsSigHandler() at osinit.c:110
#7 <signal handler called>
#8 main_arena() from libc.so
#9 proc_present_query_capabilities() at present_request.c:236
#10 Dispatch() at dispatch.c:478
#11 dix_main() at main.c:276
To avoid returning an invalid pointer (`crtcs[0]`) in that case, simply
check for `numCrtcs` being 0 and return `NULL` in that case.
Thanks to Michel Dänzer <michel.daenzer@amd.com> for pointing this as a
possible cause of the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1609181
Since 08843efc KWin was not able to start a Wayland session. Independently
of listen_fd_count add_client_fd must be called. Same holds for the
wm_selection_callback. Therefore just remove the condition.
Bugzilla: https://bugs.freedesktop.org/109220
Signed-off-by: Roman Gilg <subdiff@gmail.com>
The buffer release queue has two kinds of entries:
* Pending async flips.
* Completed flips waiting for their buffer to be released by the Wayland
compositor.
xwl_present_timer_callback neither completes async flips nor releases
buffers, so the timer isn't needed for the buffer release queue.
Fixes issue #12. Presumably the problem was that Present operations on
unmapped windows were executed immediately instead of only when reaching
the target MSC.
When a window is unrealized, a pending frame callback may never be
called, which could result in repeatedly freezing until the frame timer
fires after a second.
Fixes these symptoms when switching from fullscreen to windowed mode in
sauerbraten.
There's no need to keep track of the window which last performed a
Present flip. This fixes crashes due to the assertion in
xwl_present_flips_stop failing. Fixes issue #10.
The damage generated by a flip only needs to be ignored once, then
xwl_window::present_flipped can be cleared. This may fix freezing in
the (hypothetical) scenario where Present flips are performed on a
window, followed by other drawing requests using the window as the
destination, but nothing triggering xwl_present_flips_stop. The damage
from the latter drawing requests would continue being ignored.
There are logically server state not screen state. Not that multiple
screens works, at the moment, but that's no excuse to be sloppy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Completing them from xwl_present_sync_callback had at least two issues:
* It was before the MSC was incremented in xwl_present_frame_callback,
so the MSC value in the completion event could be lower than the
target specified by the client. This could cause hangs with the Mesa
Vulkan drivers.
* It allowed clients to run at a frame-rate higher than the Wayland
compositor's frame-rate, wasting energy on generating frames which
were never displayed. This isn't expected to happen unless the client
specified PresentOptionAsync (in which case flips are still completed
from xwl_present_sync_callback, allowing higher frame-rates).
v2:
* Make xwl_present_has_events return true when there's a pending
"synchronous" flip, so those complete after at most ~1 second even if
the Wayland server doesn't send a frame event.
Bugzilla: https://bugs.freedesktop.org/106713
Apart from simplifying the code, this should also prevent a condition
(which might only be possible with the following fix) reported in
https://gitlab.freedesktop.org/wayland/weston/issues/115#note_52467:
1. xwl_present_timer_callback indirectly calls xwl_present_reset_timer
-> xwl_present_free_timer
2. xwl_present_timer_callback then returns a non-0 value, so DoTimer
calls TimerSet with the old xwl_present_window->frame_timer pointer
which was freed in step 1 => use after free
Calling xwl_present_reset_timer explicitly passes NULL to TimerSet if
step 1 freed xwl_present_window->frame_timer, and it will allocate a new
one.
The function `xwl_glamor_gbm_create_pixmap()` first creates a buffer
objects and then creates the xwl_pixmap from it.
However, `xwl_glamor_gbm_create_pixmap_for_bo()` is not called if the
buffer object creation fails, and `xwl_glamor_gbm_create_pixmap()`
simply returns `glamor_create_pixmap()`.
The problem with this is that if `xwl_glamor_gbm_create_pixmap_for_bo()`
is not called then neither is `xwl_pixmap_set_private()` and further
calls to `xwl_pixmap_get()` will return NULL and cause a NULL pointer
dereference if the return value is not checked:
#0 xwl_glamor_gbm_get_wl_buffer_for_pixmap ()
at hw/xwayland/xwayland-glamor-gbm.c:248
#1 xwl_window_post_damage () at hw/xwayland/xwayland.c:697
#2 xwl_display_post_damage () at hw/xwayland/xwayland.c:759
#3 block_handler () at hw/xwayland/xwayland.c:890
#4 BlockHandler () at dix/dixutils.c:388
#5 WaitForSomething () at os/WaitFor.c:201
#6 Dispatch () at dix/dispatch.c:421
#7 dix_main () at dix/main.c:276
#8 __libc_start_main () at ../csu/libc-start.c:308
#9 _start ()
(gdb) print xwl_pixmap
$1 = (struct xwl_pixmap *) 0x0
Make sure we check for `xwl_pixmap_get()` returned value where relevant
and fail gracefully if this is the case.
See also: https://gitlab.gnome.org/GNOME/mutter/issues/340
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marco Trevisan <mail@3v1n0.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
`xwl_present_timer_callback()` is initially marked a private and later
implemented as public.
Let's keep that private, shall we.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
0a9415cf apparently can tickle bugs in the GL stack where glGetString
returns NULL, presumably because the eglMakeCurrent() didn't manage to
actually install a dispatch table and you're hitting a stub function.
That's clearly not our bug, but if it happens we should at least not
crash. Notice this case and fail gently.
Signed-off-by: Adam Jackson <ajax@redhat.com>
wl_drm's protocol "device" event provides the path to the DRM device,
which may not be a render node, thus causing Xwayland to fall back to
DRM authentication which may fail if the user has switched to another
VT while Xwayland is starting.
Search for a render node corresponding to the given DRM device and try
to use it instead, as render nodes do not need DRM authentication and
Xwayland can make use of them if it can find one.
Closes: https://bugs.freedesktop.org/108038
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mesa started supporting GL_OES_EGL_image on llvmpipe in 17.3, after this
commit:
commit bbdeddd5fd0b797e1e281f058338b3da4d98029d
Author: Gurchetan Singh <gurchetansingh@chromium.org>
Date: Tue Aug 1 14:49:33 2017 -0700
st/dri: add drisw image extension
That's pretty cool, but it means glamor now thinks it can initialize on
llvmpipe. This is almost certainly not what anyone wants, as glamor on
llvmpipe is pretty much uniformly slower than fb.
This fixes both Xorg and Xwayland to refuse glamor in such a setup.
Xephyr is left alone, both because glamor is not the default there and
because Xephyr+glamor+llvmpipe is one of the easier ways to get xts to
exercise glamor.
The (very small) downside of this change is that you lose DRI3 support.
This wouldn't have helped you very much (since an lp glamor blit is
slower than a pixman blit), but it would eliminate the PutImage overhead
for llvmpipe's glXSwapBuffers. A future change should add DRI3 support
for the fb-only case.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Xwayland's `xwl_destroy_window()` invokes `xwl_present_cleanup()`
before the common `DestroyWindow()`.
But then `DestroyWindow()` calls `present_destroy_window()` which will
possibly end up in `xwl_present_abort_vblank()` which will try to access
data that was previously freed by `xwl_present_cleanup()`:
Invalid read of size 8
at 0x434184: xwl_present_abort_vblank (xwayland-present.c:378)
by 0x53785B: present_wnmd_abort_vblank (present_wnmd.c:651)
by 0x53695A: present_free_window_vblank (present_screen.c:87)
by 0x53695A: present_destroy_window (present_screen.c:152)
by 0x42A90D: xwl_destroy_window (xwayland.c:653)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
Address 0x182abde0 is 80 bytes inside a block of size 112 free'd
at 0x4C2FDAC: free (vg_replace_malloc.c:530)
by 0x42A937: xwl_destroy_window (xwayland.c:647)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
by 0x446DA5: ProcKillClient (dispatch.c:3279)
by 0x4476AF: Dispatch (dispatch.c:479)
Block was alloc'd at
at 0x4C30B06: calloc (vg_replace_malloc.c:711)
by 0x433F46: xwl_present_window_get_priv (xwayland-present.c:54)
by 0x434228: xwl_present_get_crtc (xwayland-present.c:302)
by 0x539728: proc_present_query_capabilities (present_request.c:227)
by 0x4476AF: Dispatch (dispatch.c:479)
by 0x44B5B5: dix_main (main.c:276)
by 0x75F611A: (below main) (libc-start.c:308)
This is because `xwl_present_cleanup()` frees the memory but does not
remove it from the window's privates, and `xwl_present_abort_vblank()`
will still find it and hence try to access that freed memory...
Remove `xwl_present_window` from window's privates on cleanup so that no
other function can find and reuse that data once it's freed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1616269
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_output->randr_crtc is used in the update_screen_size() function :
==5331== Invalid read of size 4
==5331== at 0x15263D: update_screen_size (xwayland-output.c:190)
==5331== by 0x152C48: xwl_output_remove (xwayland-output.c:413)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
==5331== by 0x27574B: Dispatch (dispatch.c:421)
==5331== by 0x279945: dix_main (main.c:276)
==5331== Address 0x1aacb5f4 is 36 bytes inside a block of size 154 free'd
==5331== at 0x48369EB: free (vg_replace_malloc.c:530)
==5331== by 0x1F8AE8: RROutputDestroyResource (rroutput.c:421)
==5331== by 0x29A2AC: doFreeResource (resource.c:880)
==5331== by 0x29AE5B: FreeResource (resource.c:910)
==5331== by 0x152BE0: xwl_output_remove (xwayland-output.c:408)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== Block was alloc'd at
==5331== at 0x48357BF: malloc (vg_replace_malloc.c:299)
==5331== by 0x1F93E0: RROutputCreate (rroutput.c:83)
==5331== by 0x152A75: xwl_output_create (xwayland-output.c:361)
==5331== by 0x14BE59: registry_global (xwayland.c:764)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents multiple scroll events happening for wayland compositors
which send axis values other than 10. For example, libinput will
typically return 15 for each scroll wheel step, and if a wayland
compositor sends those to xwayland without normalising them, 2 scroll
wheel steps will end up as 3 xorg scroll events. By listening for the
discrete_axis event, this will now correctly send only 2 xorg scroll
events.
The wayland protocol gurantees that there will always be an axis event
following an axis_discrete event. However, it does not gurantee that
other events (including other axis_discrete+axis pairs) will not happen
in between them. So we must keep a list of outstanding axis_discrete
events.
Signed-off-by: Scott Anderson <scott@anderso.nz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
glamor_fds_from_pixmap() will bail out early if DRI3 is not enabled,
unfortunately Xwayland's glamor code would not set it as enabled which
would lead to blank pixmaps when using texture from pixmap.
Make sure to mark DRI3 as enabled from glamor_egl_screen_init() in
Xwayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107287
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The logical size is the size of the output in the global compositor
space. The mode width/height should be scaled as in the logical
size, but shouldn't be transformed. Thus we need to rotate back
the logical size to be able to use it as the mode width/height.
This fixes issues with pointer input on transformed outputs.
Signed-Off-By: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When support for allocating GBM BOs with modifiers was added,
glamor_fd_from_pixmap() was changed so that it would return an error if
it got a bo with modifiers set from glamor_fds_from_pixmap(). The
problem is that on systems that support BOs with modifiers,
glamor_fds_from_pixmap() will always return BOs with modifiers.
This means that glamor_fd_from_pixmap() was broken entirely, which broke
a number of other things including glamor_shareable_fd_from_pixmap(),
which meant that modesetting using multiple GPUs with the modesetting
DDX was also broken. Easy reproducer:
- Find a laptop with DRI prime that has outputs connected to the
dedicated GPU and integrated GPU
- Try to enable one display on each using the modesetting DDX
- Fail
Since there isn't a way to ask for no modifiers from
glamor_fds_from_pixmap, we create a shared _glamor_fds_from_pixmap()
function used by both glamor_fds_from_pixmap() and
glamor_fd_from_pixmap() that calls down to the appropriate
glamor_egl_fd*_from_pixmap() function.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
The API init_wl_registry() and has_wl_interfaces() are marked as being
optional, but both GBM And EGLStream backends implement them so there is
point in keeping those optional.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
When retrieving the Wayland buffer from a pixmap, if the buffer already
exists, the GBM backend will return that existing buffer.
However, as seen with the Present issues, if the call had previously
passed a wrong size, that buffer will remain at the wrong size for as
long as the buffer exists, which is error prone.
Considering that the width/height passed to get_wl_buffer() is always the
actual pixmap drawable size, and considering that the EGLStream backend
makes no use of the size either, there is really no point in passing the
width/height around.
Simplify the xwl_glamor_pixmap_get_wl_buffer() and EGL backends API by
removing the pixmap size, and use the drawable size instead.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_glamor_eglstream_init_egl() uses "EGL_IMG_context_priority"
extension, make sure it's actually available before using it.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Now that we have separate backends for EGLStream and GBM, we can
explicitly check for the EGLStream backend to disable present support
in that case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
To be able to check for availability of the Wayland interfaces required
to run a given EGL backend (either GBM or EGLStream for now), we need
to have each backend structures and vfuncs in place before we enter the
Wayland registry dance.
That basically means that we should init all backends at first, connect
to the Wayland compositor and query the available interfaces and then
decide which backend is available and should be used (or none if either
the Wayland interfaces or the EGL extensions are not available).
For this purpose, hold an egl_backend struct for each backend we are to
consider prior to connect to the Wayland display so that, when we get to
query the Wayland interfaces, everything is in place for each backend to
handle the various Wayland interfaces.
Eventually, when we need to chose which EGL backend to use for glamor,
the available Wayland interfaces and EGL extensions available are all
known to Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Move EGL backends initialization to its own function in
xwayland-glamor.c
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Introduces a new egl_backend function to let the EGL backend check for
the presence of the required Wayland interfaces.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGL backend availability requires both EGL extensions and Wayland
interfaces to be present, so we will need to consider multiple backends
during initialization.
As a preliminary work, move the egl_backend to its own struct so that we
can have more than one backend at any given time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If using a render node, we can skip DRM authentication.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Surely, we should fail to init GBM backend if "GL_OES_EGL_image" is
missing.
This seems to have been lost with commit 1545e2dba ("xwayland: Decouple
GBM from glamor").
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Olivier Fourdan
Adam Jackson
Carlos Garnacho
Fabrice Fontaine
Michel Dänzer
Alan Coopersmith
Roman Gilg
Peter Hutterer
Lionel Landwerlin
Scott Anderson
emersion
Lyude Paul