Slightly simplifies the callers since they don't need to check for
non-NULL anymore.
I do extremely hate the workarounds here to suppress misprite taking the
cursor down though. Surely there's a better way.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When we set these up initially, no subsystems have allocated any
privates yet, so the storage address will be null, and memset(NULL, ...)
is undefined.
Request-handlers as registered in the requestVector array, always get
passed the clientPtr for the client which sent the request.
But the implementation of many request-handlers typically consists of
a generic handler calling implementation specific callbacks and / or
various helpers often multiple levels deep and in many cases the clientPtr
does not get passed to the callbacks / helpers.
This means that in some places where we would like to have access to the
current-client, we cannot easily access it and fixing this would require
a lot of work and often would involve ABI breakage.
This commit adds a GetCurrentClient helper which can be used as a
shortcut to get access to the clienPtr for the currently being processed
request without needing a lot of refactoring and ABI breakage.
Note using this new GetCurrentClient helper is only safe for code
which only runs from the main thread, this new variable MUST NOT be used
by code which runs from signal handlers or from the input-thread.
The specific use-case which resulted in the creation of this patch is adding
support for emulation of randr / vidmode resolution changes to Xwayland.
This emulation will not actually change the monitor resolution instead it
will scale any window with a size which exactly matches the requested
resolution to fill the entire monitor. The main use-case for this is
games which are hard-coded to render at a specific resolution and have
sofar relied on randr / vidmode to change the monitor resolution when going
fullscreen.
To make this emulation as robust as possible (e.g. avoid accidentally scaling
windows from other apps) we want to make the emulated resolution a per client
state. But e.g. the RRSetCrtc function does not take a client pointer; and is
a (used) part of the Xorg server ABI (note the problem is not just limited
to RRSetCrtc).
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is a race when reseting the XServer that causes spriteInfo to be
NULL in GetPairedDevice resulting a segfault and subsequent crash. The
problem was noticed when opening a connection, creating master devices,
destroying master devices and closing the connection during testing.
Signed-off-by: Arthur Williams <taaparthur@gmail.com>
When compiling with link time optimization, GCC thinks it's discovered
undefined behavior:
events.c: In function 'XineramaConfineCursorToWindow':
events.c:609:13: warning: iteration 2147483647 invokes undefined behavior [-Waggressive-loop-optimizations]
events.c:609:11: note: within this loop
events.c:605:49: warning: array subscript -1 is below array bounds of 'struct _Window *[16]' [-Warray-bounds]
events.c:606:31: warning: array subscript -1 is below array bounds of 'struct _Screen *[16]' [-Warray-bounds]
events.c:610:39: warning: array subscript -2 is below array bounds of 'struct _Screen *[16]' [-Warray-bounds]
events.c:617:38: warning: array subscript -2 is below array bounds of 'struct _Window *[16]' [-Warray-bounds]
events.c:619:35: warning: array subscript -2 is below array bounds of 'struct _Screen *[16]' [-Warray-bounds]
This results from
i = PanoramiXNumScreens - 1;
RegionCopy(&pSprite->Reg1, &pSprite->windows[i]->borderSize);
off_x = screenInfo.screens[i]->x;
off_y = screenInfo.screens[i]->y;
where GCC believes that PanoramiXNumScreens might be 0. Unfortunately
GCC is just smart enough to be an annoyance because this case is not
actually possible: XineramaConfineCursorToWindow() is only called when
noPanoramiXExtension is false, and if noPanoramiXExtension is false then
PanoramiXNumScreens must be >1 (see PanoramiXExtensionInit()).
So, add an assert(!noPanoramiXExtension), which to my surprise provides
GCC with information even in release builds and lets GCC understand that
the code is not doing anything that is undefined behavior.
I chose this solution instead of the proposed assert(i >= 0) because the
same pattern occurs in CheckVirtualMotion() but is inside an
'if (!noPanoramiXExtension)' and does not generate any warnings.
Fixes: xorg/xserver#590
Signed-off-by: Matt Turner <mattst88@gmail.com>
Separate each statement of the form "assert(a && b);" into "assert(a);"
and "assert(b);" for more precise diagnostics, except for this clever
use in drmmode_display.c where it was used to pass a hint to developers:
assert(num_infos <= 32 && "update return type");
We hide CWBackingStore from the screen hook if nothing's actually
changing, which means compChangeWindowAttributes no longer needs to
compare the requested state with the present one.
Terms:
dev->last.valuator[] is the last value given to us by the driver
dev->valuator.axisVal[] is the last value sent to the client
dev->last.scroll[] is the abs value of the scroll axis as given by the driver,
used for button emulation calculation (and the remainder)
This function updates the device's last.valuator state based on the current
master axis state. This way, relative motion continues fluidly when switching
between devices. Before mouse 2 comes into effect, it's valuator state is
updated to wherever the pointer currently is so the relative event applies on
top of that.
This can only work for x/y axes, all other axes aren't guaranteed to have the
same meaning and/or may not be present:
- xtest device: no valuator 2
- mouse: valuator 2 is horizontal scroll axis
- tablet: valuator 2 is pressure
Scaling the current value from the pressure range into the range for
horizontal scrolling makes no sense. And it causes scroll jumps:
- scroll down, last.valuator == axisVal == 20
- xdotool click 1, the XTest device doesn't have that valuator
- scroll up
- updateSlaveDeviceCoords reset last.valuator to 0 (axisVal == 20)
- DeviceClassesChangedEvent includes value 20 for the axis
- event is processed, last.value changes from 0 to -1
- axisVal is updated to -1, causing a jump of -21
The same applies when we switch from tablet to mouse wheel if the pressure
value is 0 on proximity out (basically guaranteed). So let's drop this code
altogether and only leave the scaling for the relative x/y motion.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The `LimitClient` is set once and for all at startup, whereas the
function `ResourceClientBits()` which returns the client field offset
within the XID based on the value of `LimitClient` can be called
repeatedly.
Small optimization, cache the result of `ilog2()`, that saves running
the same loop over and over each time `ResourceClientBits()` is called.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
If the server resets, most client workqueues are cleaned up as the
clients are killed.
The one exception is the server's client, which is exempt from
the killing spree.
If that client has a queued work procedure active, it won't get
cleared on reset.
This commit ensures it gets cleared too.
c67f2eac56 ("dix: always send focus event on grab change") made dix
always sent events when it's a NotifyGrab or NotifyUngrab, even if
from == to, because 'from' can just come from a previous XSetInputFocus
call.
However, when an application calls XGrabKeyboard several times on
the same window, we are now sending spurious FocusOut+FocusIn with
NotifyGrab, even if the grab does not actually change. This makes screen
readers for blind people spuriously emit activity events which disturb
screen reading workflow when e.g. switching between menus.
This commit avoids calling DoFocusEvents in that precise case, i.e. when
oldWin is a previous grab and the new grab is the same window.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The screensaver can regularly move its window to random offsets. It should
use the ConfigureWindow function instead of calling the Screen's MoveWindow
directly. Some MoveWindow implementations, such as compMoveWindow, rely on
Screen's ConfigNotify being called first as it happens in ConfigureWindow.
Reviewed-by: Adam Jackson <ajax@redhat.com>
This reverts commit b45c74f0f2.
It broke the cursor in other games. Apparently those use cursor data
with premultiplied alpha, but with some pixels having r/g/b values
larger than the alpha value (which corresponds to original r/g/b
values > 1.0), triggering the workaround.
Seems the cure turned out worse than the disease, so revert.
Bugzilla: https://bugs.freedesktop.org/108650
Turns out some apps (e.g. the Civilization VI game) use
non-premultiplied cursor data which doesn't have any pixels with 0 alpha
but non-0 non-alpha, but can still result in visual artifacts.
This uses the method suggested by Kamil in
https://bugs.freedesktop.org/92309#c19: check for pixels where any
colour component value is larger than the alpha value, which isn't
possible with premultiplied alpha.
There can still be non-premultiplied data which won't be caught by this,
but that should result in slightly incorrect colours and/or blending at
the worst, not wildly incorrect colours such as shown in the bug report
below.
Bugzilla: https://bugs.freedesktop.org/108355
Suggested-by: Kamil Paral <kamil.paral@gmail.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This variable was no longer being read anywhere. MAXCLIENTS the macro is
the compile-time maximum limit, LIMITCLIENTS the macro is the default
limit, LimitClients the variable is the limit for the current server.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Coverity complains about a use after free in here after the
freeing, I can't follow the linked list so well, but whot
says the device can only be on one list once, so break should
fix it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Not sure what if anything calls XSetDeviceModifierMapping() but this would've
failed all the time. check_modmap_change() returns Success but we were
treating it like a boolean. Fix this.
Reported-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
GLX registers an extension before we know if there are any screens that
can actually do it. It's inconvenient to shrink the extension list, so
instead allow the extension to simply zero out its base opcode to
indicate that it needed to panic and disable itself.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Focus events are useless when 'from' and 'to' are the same. But when
this is the result of a (Un)GrabKeyboard request, we should always send
them, including when the window manager had previously used XSetInputFocus
to specify the focus on a window which happens to be now taking a grab.
This is notably needed for window manager using XI to always get keyboard
events even during grabs, so they can determine exactly when grabbing is
active.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
../dix/getevents.c: In function ‘transformAbsolute’:
../dix/getevents.c:1195:28: warning: ‘oy’ may be used uninitialized in this function [-Wmaybe-uninitialized]
struct pixman_f_vector p = {.v = {*x, *y, 1} };
^
../dix/getevents.c🔢22: note: ‘oy’ was declared here
double x, y, ox, oy;
^~
This one is truly special. Even though both ox and oy are set and read
along the same paths, only oy is marked for this warning! Initializing
just oy = 0.0 fixes it entirely, but let's not make a weird thing
weirder.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
PtrCtrl really makes sense for relative pointing device only, absolute
devices such as touch devices do not have any PtrCtrl set.
In some cases, if the client issues a XGetPointerControl() immediatlely
after a ChangeMasterDeviceClasses() copied the touch device to the VCP,
a NULL pointer dereference will occur leading to a crash of Xwayland.
Check whether the PtrCtrl is not NULL in ProcGetPointerControl() and
return the default control values otherwise, to avoid the NULL pointer
dereference.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1519533
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Roundhouse kick replacing the various (sizeof(foo)/sizeof(foo[0])) with
the ARRAY_SIZE macro from dix.h when possible. A semantic patch for
coccinelle has been used first. Additionally, a few macros have been
inlined as they had only one or two users.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
This appears to be essentially unused. The only known client-side
library for the SELinux extension is xcb, which does not look for the
name "Flask". The "SGI-GLX" alias for GLX appears to be a bit of
superstition at this point, NVIDIA's driver does not expose it and Mesa
does not check for it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
The SendEvent request holds xEvent which is exactly 32 bytes long, no more,
no less. Both ProcSendEvent and SProcSendEvent verify that the received data
exactly match the request size. However nothing stops the client from passing
in event with xEvent::type = GenericEvent and any value of
xGenericEvent::length.
In the case of ProcSendEvent, the event will be eventually passed to
WriteEventsToClient which will see that it is Generic event and copy the
arbitrary length from the receive buffer (and possibly past it) and send it to
the other client. This allows clients to copy unitialized heap memory out of X
server or to crash it.
In case of SProcSendEvent, it will attempt to swap the incoming event by
calling a swapping function from the EventSwapVector array. The swapped event
is written to target buffer, which in this case is local xEvent variable. The
xEvent variable is 32 bytes long, but the swapping functions for GenericEvents
expect that the target buffer has size matching the size of the source
GenericEvent. This allows clients to cause stack buffer overflows.
Signed-off-by: Michal Srb <msrb@suse.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the root window borderClip region is null, the PointInWindowIsVisible()
check fails if pointer warping is attempted on the root window, making
the warping operation bail out early.
Assume coordinates always lay inside the root window for this case,
the actual position will be clamped later within screen coordinates anyway.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Delay removing the client from these two queues until all potential
I/O has completed in case we mark the client as ready for reading or
with pending output during the close operation.
Bugzilla: https://bugs.freedesktop.org/100957
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Found when the meson conversion set the symbol to defined, instead of
defined to 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
None of this is actually wired up to anything, so we can also remove the
devPrivates from the DamageRec. The DamageExtRec is what would need
devPrivates for selinux labeling, in principle.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will be used by in-server features that need to react to property
changes. The first one will be _XWAYLAND_ALLOW_COMMITS.
Signed-off-by: Adam Jackson <ajax@redhat.com>
[Pekka: add commit message body]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Instead of just the atom. No functional change.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The root window, and by extension any damage records referencing it,
may be destroyed before shared pixmaps referencing it, which resulted in
use-after-free / double-free in PixmapStopDirtyTracking.
Fixes: b5b292896f ("prime: Sync shared pixmap from root window instead of screen pixmap")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The screen pixmap doesn't receive updates while there's a Present flip
window.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
A client which is attended while a grab is blocking execution of its
requests needs to be placed in the saved_ready_clients list so that it
will get scheduled once the grab terminates. Otherwise, if the client
never sends another request, there is no way for it to be placed in
the ready_clients list.
v2: Wrap comment above mark_client_saved_ready.
Remove test for OS_COMM_IGNORED which will always be true.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99333
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The custom os/os.O library reuses *.o files of os/libos.la.
The current rule assumes automake puts all the objects into per-target
am__*_la_OBJECTS variable. At least with AC_REPLACE_FUNCS, this no
longer holds (as wanted objects are put into LTLIBOBJS instead).
Depend on automake's result, the *.la library instead, to express demand
of any its dependencies being built.
Should be fixing randomly occuring "undefined reference to `strlcpy'"
errors when linking Xvfb and other DDX-es that could use os.O.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Commits 816015648f and
fee0827a9a made it so that
wl_keyboard::enter doesn't result in X clients getting KeyPress events
while still updating our internal xkb state to be in sync with the
host compositor.
wl_keyboard::leave needs to be handled in the same way as its
semantics from an X client POV should be the same as an X grab getting
triggered, i.e. X clients shouldn't get KeyRelease events for keys
that are still down at that point.
This patch uses LeaveNotify for these events on wl_keyboard::leave and
changes the current use of KeymapNotify to EnterNotify instead just to
keep some symmetry between both cases.
On ProcessDeviceEvent() we still need to deactivate X grabs if needed
for KeyReleases.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
I think it is possible that output could get queued to a client during
CloseDownClient. After it is removed from the pending queue, active
grabs are released, the client is awoken if sleeping and any work
queue entries related to the client are processed.
To fix this, move the call removing it from the output_pending chain
until after clientGone has been set and then check clientGone in
output_pending_mark.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1382444
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[This was originally a workaround for a client-side resource leak:
http://lists.freedesktop.org/archives/xorg-devel/2012-November/034555.html
Obviously that's a broken app, but the performance problem it
illustrates - that walking the linked list ends up burning all your CPU
time - is real enough. - ajax]
v2: Replace with a shorter code sequence which computes the same
results for all but numBits == 7
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a valuator mask setter for setting absolute coordinate combined
with unaccelerated motion deltas. This will later be used by Xwayland
to combine a wl_pointer.motion() event with the unaccelerated delta of
a wp_relative_pointer.relative_motion() event.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
GetImage is allowed to return window border contents, so don't remove
that from the returned image.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows us to remove darwinEvents_lock() and darwinEvents_unlock()
and remove the serverRunning hack from dix
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This function will be called when a pointer is grabbed non-root window
set as the 'confineTo'. This will enable the ddx to handle the
confinement their own way.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This new vfunc will be called, if set, after a client has issued a
WarpPointer request. This is necessary for implementing pointer warp
emulation in Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
pClient does not contain a live value after the transition to lists
https://bugs.freedesktop.org/show_bug.cgi?id=97765
Application Specific Information:
X.Org X Server 1.18.99.1 Build Date: 20160910
=================================================================
==16921==ERROR: AddressSanitizer: global-buffer-overflow on address 0x000108ce3834 at pc 0x000108880766 bp 0x7000045f76c0 sp 0x7000045f76b8
READ of size 4 at 0x000108ce3834 thread T6
#0 0x108880765 in SmartScheduleClient dispatch.c:365
#1 0x10887ecc5 in Dispatch dispatch.c:422
#2 0x1088c05f1 in dix_main main.c:301
#3 0x1082aabba in server_thread quartzStartup.c:66
#4 0x7fffc5f16aaa in _pthread_body (libsystem_pthread.dylib+0x3aaa)
#5 0x7fffc5f169f6 in _pthread_start (libsystem_pthread.dylib+0x39f6)
#6 0x7fffc5f161fc in thread_start (libsystem_pthread.dylib+0x31fc)
Regressed-in: 8f1edf4bd3
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This ensures that the deviceProc is never called while the input
thread is processing data from the device.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently with PRIME if we detect a secondary GPU,
we switch to using SW cursors, this isn't optimal,
esp for the intel/nvidia combinations, we have
no choice for the USB offload devices.
This patch checks on each slave screen if hw
cursors are enabled, and also calls set cursor
and move cursor on all screens.
Cc: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Fix a couple of copy-and-paste errors preventing FocusIn grabs from working.
Perhaps the extension version should be bumped though to distinguish between
working and non-working extension versions.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make sure the whole event is initialized, instead of leaving the pad
bytes unset.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Eliminates all of the fd_set mangling in the server main thread
v2: Listen for POLLOUT while writes are blocked.
v3: Only mark client not ready on EAGAIN return from read
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This converts the dispatch loop into using a list of ready clients
instead of an array. This changes the WaitForSomething API so that it
notifies DIX when a client becomes ready to read, instead of returning
the set of ready clients.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The intermediate grabState, "GrabKickout", was used to trigger
dispatch into going back to WaitForSomething after doing a GrabServer
so that the set of ready clients would be recomputed to match what the
server should be processing. As we only process one client per
WaitForSomething call, we will always hit WaitForSomething after
finishing the current client, and so don't need any special case here.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of having scheduling done in two places (one in
WaitForSomething, and the other in SmartScheduleClient), just stick
all of the scheduling in SmartScheduleClient.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This new libXfont API eliminates exposing internal X server symbols to
the font library, replacing those with a struct full of the entire API
needed to use that library.
v2: Use libXfont2 instead of libXfont_2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Some games incorrectly use non-premultiplied ARGB cursor data, presumably
because that's what Windows uses. On some hardware (and with SWcursor),
this breaks areas of the cursor which are supposed to be transparent
(and presumably also translucent areas, but that's less noticeable).
This change checks for pixels with alpha == 0 and any non-alpha component
!= 0. If any such pixel is found, the data is assumed to be
non-premultiplied and fixed up by multiplying the RGB components with the
alpha component.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92309
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The screen block and wakeup handlers are the only ones which provide a
well known ordering between the wrapping layers; placing these as
close as possible to the server blocking provides a way for the driver
to control the flow of execution correctly.
Switch the shadow code to run in the screen block handler so that it
now occurrs just before the server goes to sleep.
Switch glamor to call down to the driver after it has executed its own
block handler piece, in case the driver needs to perform additional
flushing work after glamor has called glFlush.
These changes ensure that the following modules update the screen in
the correct order:
animated cursors (uses RegisterBlockAndWakeupHandlers dynamically)
composite (dynamic wrapping)
misprite (dynamic wrapping)
shadow (static wrapping)
glamor (static wrapping)
driver (static wrapping)
It looks like there's still a bit of confusion between composite and
misprite; if composite updates after misprite, then it's possible
you'd exit the block handler chain with the cursor left hidden. To fix
that, misprite should be wrapping during ScreenInit time and not
unwrapping. And composite might as well join in that fun, just to make
things consistent.
[v2] Unwrap BlockHandler in shadowCloseScreen (ajax)
[v3] ephyr: Use screen block handler for flushing changes
ephyr needs to make sure it calls glXSwapBuffers after glamor finishes
its rendering. As the screen block handler is now called last, we have
to use that instead of a registered block/wakeup handler to make sure
the GL rendering is done before we copy it to the front buffer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
There are no in-tree consumers of the audit hooks, and they are in any
case redundant with the dtrace dispatch hooks. Neither is there any
in-tree user of the core request dispatch hook. The extension hook is
only used for non-default security cases, but in the absence of LTO we
always have to take the function call into XaceHookDispatch to find out
that there's no callback registered.
Cc: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
In patch 137ac094e7, Adam moved an
expensive call to UpdateCurrentTime out of the main dispatch
loop. That's a good change as the original fix from Chase was a bit
expensive. However, it breaks grab processing and so a couple of the
calls to UpdateCurrenTime need to be removed.
Input event processing can generate a stream of events; a button press
that activates a grab will send a press followed by a sequence of
enter/leave events. All of these should have the same time stamp on
the wire as they occur at the 'same' time.
More importantly, the grab time recorded in the device is pulled from
currentTime after all of the events are delivered, so if currentTime
doesn't match the time in the device event, then future grab
modifications will fail as the time marked in the device will be
'later' than the grab time known to the client (which is defined as
the timestamp from the activating input event).
A bit of history here -- it used to be that currentTime was driven
*entirely* by input events; those timestamps didn't even have to be
related to the system time in any way. Then we started doing ICCCM
stuff and people got confused when PropertyNotify events would have
the same timestamp even when delivered minutes apart because no input
events were delivered.
We added code in the server to go update the time, but only if no
input events were pending (so that the clock "wouldn't" go
backwards). The only places where this is necessary is in request
processing which may generate an event with a timestamp, and there
only at the very top of the request processing code so that the whole
request would be processed at the 'same time', just like events.
cc: Chase Douglas <chase.douglas@canonical.com>
cc: Peter Hutterer <peter.hutterer@who-t.net>
cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
These are local to inputthread.c; the ones in globals.c aren't
declared in any header file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Now that input is threaded, malloc can be used at event time to resize
the touchpoint buffer as needed.x
v2: Remove "Need to grow the queue means dropping events."
from comment as it no longer applies. (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This changes XInput 2's propagation of NotifyPointer focus out events to
include the pointer window as well, similar to core events. This fixes
a potential permanent focus in GDK when the focus moves to PointerRoot.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=93539
Signed-off-by: Andrew Comminos <andrew@comminos.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was added in:
commit 312910b4e3
Author: Chase Douglas <chase.douglas@canonical.com>
Date: Wed Apr 18 11:15:40 2012 -0700
Update currentTime in dispatch loop
Unfortunately this is equivalent to calling GetTimeInMillis() once per
request. In the absolute best case (as on Linux) you're only hitting the
vDSO; on other platforms that's a syscall. Either way it puts a pretty
hard ceiling on request throughput.
Instead, push the call down to the requests that need it; basically,
grab processing and event generation.
Cc: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
-Wlogical-op now tells us:
devices.c:1685:23: warning: logical ‘and’ of equal expressions
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This was fine back when valuators were integer. Device
properties are float (not double), so some instances remain.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was quite unlikely except in situations where a proper startup
would have been impossible anyway, but since automated checks don't
grade likelyhood just fix it.
Detected by Jeremy Huddleston's clang checks.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a variant of ClientSignal() that signals all clients with an
optional matching sleeping client, function and closure.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This makes sure that the destination pixmap contents will be fully
initialized. Without this, a PRIME output starts out with garbage.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Font initialization was split into two stages, the first was to set up
font privates with a call to ResetFontPrivateIndex, then much later
the call to InitFonts to set up all of the FPEs. Doing the full font
initialization before initializing the video drivers means that we can
move the call to ResetFontPrivateIndex inside InitFonts.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows the server to call GetTimeInMillis() after each request is
processed to avoid needing setitimer. -dumbSched now turns off the
setitimer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a new event source type for keypress events synthesised from focus
notifications (e.g. KeymapNotify from the parent server, when running
nested). This is used to keep the keys-down array in sync with the host
server's, without sending actual keypress events to clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a flag to DeviceEvents, giving the source of the event. Currently
this only supports a 'normal' flag, but will be used later to add a
'focus-in' flag, noting events synthesised from key/button arrays on
focus-in notifications.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Michael Stapelberg <stapelberg@google.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Patch 3ab6cd31cb fixed Xinerama
interactions with font servers by not putting clients to sleep
multiple times. However, it introduced additional changes dealing with
libXfont routine returning Suspended more than once for the same
request. This additional change was to abandon processing of the
current request and free the closure data by jumping to
'xinerama_sleep' in each of the functions.
Font library functions shouldn't return Suspended more than once,
except for ListFontsWithInfo, which produces multiple replies, and
thus ends up returning Suspended many times during processing.
With the jump to xinerama_sleep occurring after the first reply was
processed, the closure for the request was freed and future calls into
the ListFontsWithInfo callback resulted in dereferencing freed
memory.
This patch removes the added branches, reverting the code to its
previous behaviour, which permitted multiple Suspended returns and
simply waited for the client to be signaled again so that the callback
could continue processing the request.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the increment is 0 but this is a scroll axis, it's definitely a bug.
Nonetheless, it has happened, so put a warning in and a return statement
that we avoid the infinite loop and hopefully be able to reproduce later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The modesetting driver corrupts memory when used after a server regeneration
because not enough memory is allocated for its pixmap privates. This happens
because its call to dixRegisterScreenSpecificPrivateKey() does nothing because
key->initialized is still TRUE from the first server generation. However, the
key is not in the screen's linked list of screen-specific privates because
that's freed and reallocated during the server generation loop in dix_main().
Fix this by clearing key->initialized before CloseScreen and add a call to
dixFreeScreenSpecificPrivates() for GPU screens.
v2: Just set key->initialized to FALSE and move dixFreeScreenSpecificPrivates()
calls to after CloseScreen.
v3: Move dixFreeScreenSpecificPrivates() calls back to just before CloseScreen.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
xserver/build.x86_64/../dix/touch.c:468:16: error: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ [-Werror=format=]
%zu is C99, but is already used in a few places. Perhaps doc/c-extensions needs
to mention it.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We're always creating ~230 atoms at startup, might as well tune it so we
don't hit the realloc path before Dispatch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Removes the last cpp conditional on ROOTLESS from dix code.
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If present, access the unaccelerated valuator mask values for DGA and XI2 raw
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a device does not have any valuators, it makes no sense to set the
device transformation. Return a BadMatch error to let the caller know
that they're trying something stupid.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The refactoring in commit efc1035ca9
removed the actual update of currentTime.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
It's going to multiply anyway, so if we have non-constant values, might
as well let it do the multiplication instead of adding another multiply,
and good versions of calloc will check for & avoid overflow in the process.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use typedefs to work around dtrace dropping const qualifiers from probe
arguments when generating Xserver-dtrace.h. Add new probes.h header to
avoid having to replicate these typedefs in every file with dtrace probes.
Gets rid of these warnings from gcc 4.8:
getevents.c:1096:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' discards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1096:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1651:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1651:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1791:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1791:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1921:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1921:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
For two ScreenRecs abs pointer positioning was working fine, but touch events
stuck to the lower/right edge on any screen but the one with a 0/0 origin.
Cause is a missing offset by the screen coordinates, causing the root
coordinates in the event to desktop-wide, not screen-wide.
Offset properly, just like we do for pointer events.
X.Org Bug 86655 <http://bugs.freedesktop.org/show_bug.cgi?id=86655>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The length checking code validates PutImage height and byte width by
making sure that byte-width >= INT32_MAX / height. If height is zero,
this generates a divide by zero exception. Allow zero height requests
explicitly, bypassing the INT32_MAX check.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
RegionSizeof contains several integer overflows if a large length
value is passed in. Once we fix it to return 0 on overflow, we
also have to fix the callers to handle this error condition
v2: Fixed limit calculation in RegionSizeof as pointed out by jcristau.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
ProcPutImage() calculates a length field from a width, left pad and depth
specified by the client (if the specified format is XYPixmap).
The calculations for the total amount of memory the server needs for the
pixmap can overflow a 32-bit number, causing out-of-bounds memory writes
on 32-bit systems (since the length is stored in a long int variable).
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: John Hunter <zhaojunwang@pku.edu.cn>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
window.c:3246:36: warning: comparison of constant -1 with expression of type
'CARD32' (aka 'unsigned int') is always true
[-Wtautological-constant-out-of-range-compare]
if (optional->backingBitPlanes != ~0L)
~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
inpututils.c:243:26: warning: comparison of constant 256 with expression of
type 'KeyCode' (aka 'unsigned char') is always false
[-Wtautological-constant-out-of-range-compare]
if (modkeymap[i] >= MAP_LENGTH)
~~~~~~~~~~~~ ^ ~~~~~~~~~~
MAP_LENGTH depends on MAX_BUTTONS which is somewhat arbitrarily chosen. We
don't expect this to ever change, but just in case leave the condition there
so the code is correct if we drop the number down.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
tranformAbsolute has a pretty simple job, that of running the X/Y
values from a device through the transformation matrix. The tricky bit
comes when the current device state doesn't include one of the
values. In that case, the last delivered value is back-converted to
device space and used instead.
The logic was twisted though, confusing GCC's uninitialized value
detection logic and emitting warnings.
This has been fixed by changing the code to:
1) Detect whether the ValuatorMask includes X/Y values
2) If either are missing, back-convert the current values into ox/oy
3) When X/Y are present, set ox/oy to the current value
4) Transform
5) Store X/Y values if changed or if they were set before.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Again, this changes FixesCreateRegionFromGC to throw BadMatch when fed a
GC with no client clip.
v2: Fix Xnest and some variable names (Keith)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No DDX is overriding this and it's fairly absurd to expose it as a
screen operation anyway.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
A careful read shows that it was always NULL. It hasn't always been; as
the DDX spec indicates, it was the "occluded region that has backing
store", but since that backing store code is long gone, we can nuke it.
mi{,Overlay}WindowExposures get slightly simpler here, and will get even
simpler in just a moment.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There's no XPrint extension (anymore).
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of making the inclusion of the registry code a global
conditional, split the registry into two pieces; the bits required by
the X-Resource extension (the resource names) and the bits required by
the XCSECURITY extension (the protocol names). Build each set of code
if the related extension is being built.
v2: Check for both XCSECURITY and XSELINUX.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Don't leave this file open during the whole server execution process;
close it once all of the extensions are initialized.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For doing reverese optimus to multiple outputs on a secondary GPU
the GPU can store the blits into a large screen pixmap, unfortunately
this means we need a destination offset into the dirty code, so
add a new API that just adds this interface.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Introduced in 45fb3a934d. When a device is
enabled, the master's locked state is pushed to the slave. If the device is
floating, no master exists and we triggered a NULL-pointer dereference
in XkbPushLockedStateToSlaves.
X.Org Bug 81885 <http://bugs.freedesktop.org/show_bug.cgi?id=81885>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
XKB allows to override the BellProc() ringing the 'keyboard bell':
instead an event is sent to an X client which can perform an
appropriate action.
In most cases this effectively prevents the core protocol bell
from ringing: if no BellProc() is set for the device, no attempt
is made to ring a bell.
This patch ensures that an XKB bell event is sent also when
the core protocol bell is rung end thus an appropriate action
can be taken by a client.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
isItTimeToYield in the conditional effectively didn't do anything here.
Take it out, and remove the comment since LBX proxies aren't a thing for
us anymore.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This reverts commit d90b5f8301.
Reverting for two reasons:
* the scaling does not work on devices that don't advertise resolution, and
the default resolution used (100 units/mm) is higher than most devices,
resulting in a significant slowdown of the touchpads.
* the scaling is still affected by resolution changing. The patch worked
before acceleration but since it maps into resolution-dependent dx/dy
coordinates the acceleration may distort the movement after the fact. So the
same input data generates different movements depending on the resolution.
This can't easily be fixed for all affected devices as synaptics has its own
velocity calculation method whereas wacom doesn't. So anything in the server
won't work for both at the same time.
Revert this for now, until a more integrated solution can be implemented.
The goal of all this is to get an x/y motion reflecting the motion
on the device, i.e. a circle on the device is a circle on the screen.
This is currently done by scaling the y coordinate depending on the screen
ratio vs device ratio. Depending on that ratio the movement on the y axis may
be accelerated (ratio < 1) or slowed (ratio > 1). This leads to the weird
effect that changing the screen ratio by plugging a new monitor changes the
speed of the touchpad.
Use a different algorithm: calculate the physical movement on the device, map
that to the same-ish distance on the screen, then convert that back into a
device-specific vector. This way we get the same mapping regardless of the
current screen dimensions.
Since the pointer accel code doesn't take device resolution into account, make
sure we apply our crazy mapping before we accelerate. This way we accelerate
resolution-independent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The server is leaking a pixmap (created by CreateDefaultStipple()) on
reset. The leak is caused by some X Server graphics contexts not being
freed on reset by the machine independent cursor code in the server,
which in turn is caused by the cursor cleanup code
(miSpriteDeviceCursorCleanup()) not being called.
Ensures the DeviceCursorCleanup() function is called when the associated
input device is closed on server reset.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The new current cursor was being referenced twice, resulting in a
memory leak when the current server generation ended.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 2f1aedcaed added several bug checks. Some
of them are not correct.
Checks in Init(Ptr|String|Bell|Led|Integer)FeedbackClassDeviceStruct verify
that no feedback struct was set yet, but that is not required. If any feedback
structs are already present, the function will chain them behind the new one.
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GLX is trying to track whether the context it wants is current, to
avoid the glFlush() (and the rest of the overhead) that occurs on all
MakeCurrent calls. However, its cache can be incorrect now that
glamor exists. This is a step toward getting glamor to coordinate
with GLX.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
On systems without these directories, we don't need to be complaining
loudly.
Reviewed-by: Kristian Hoegsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows DDXen to override the window picking to account for
native windows not seen by the X server. The bulk of the picking logic
is exposed as a new helper function, miSpriteTrace(). This function
completes the sprite trace filled out by the caller, and can be set up
to start the search from a given toplevel window.
v2: Leave existing XYToWindow API in place for API compatibility
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Handle -displayfd and an explicit display number sensibly, e.g. use the
explicitly specified display number, and write it to the displayfd
v2: displayfd might be 0, so use -1 as invalid value
v3: Rebase for addition of NoListenAll flag
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
miOpqStipDrawable resets the stipple after painting. When that stipple
was NULL, ChangeGC needs to handle that and not crash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-off-by: Eric Anholt <eric@anholt.net>
Whenever the master changes, push the locked modifier state to the attached
slave devices, then update the indicators. This way, when NumLock or CapsLock
are hit on any device, the LED will light up on all devices. Likewise, a new
keyboard attached to a master device will light up with the correct
indicators.
The indicators are handled per-keyboard, depending on the layout, i.e. if one
keyboard has grp_led:num set, the NumLock LED won't light up on that keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
If there is a selection left over from a previous execution of the
main loop, and that selection has privates allocated for it, the X
server will crash. This is because dixResetPrivates() resets the
privates refcounts to zero without accounting for the reference held
by the selection object. When the selection is then deleted in
InitSelections() after the call to dixResetPrivates(), the refcount
for its privates type goes negative and bad things happen.
To fix this, we should delete any existing selections before calling
dixResetPrivates(). This will properly release the selection's
privates and avoid the crash.
A more thorough description of the problem and a test case to
reproduce the crash is available at a previous mail:
"Negative Selection devPrivates refcount?"
By Andrew Eikum to xorg-devel on 10 Dec 2013
http://lists.freedesktop.org/archives/xorg-devel/2013-December/039492.html
Signed-off-by: Andrew Eikum <aeikum@codeweavers.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
dispatch.c: In function 'SetVendorString':
dispatch.c:481:29: warning: declaration of 'string' shadows a global declaration [-Wshadow]
SetVendorString(const char *string)
^
dispatch.c:135:21: warning: shadowed declaration is here [-Wshadow]
typedef const char *string;
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
dev->button->down is a bitmask, not a normal array. Use the helper function to
check, we technically allow the mapping to change after the physical button
has been pressed (but not yet processed yet), so only check BUTTON_PROCESSED.
From XSetPointerMapping(3):
"If any of the buttons to be altered are logically in the down state,
XSetPointerMapping returns MappingBusy, and the mapping is not changed."
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The server internally relies on arrays with a MAX_BUTTONS maximum size (which
is the max the core protocol can transport). Make sure a driver adheres to
that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Fallout from fecc7eb1cf, and reverts most of the
rest of that patch.
The device name is allocated and may even change during PreInit. The const
warnings came from the test codes, the correct fix here is to fix the test
code.
touch.c: In function ‘touch_init’:
touch.c:254:14: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default]
dev.name = "test device";
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Introduced in fecc7eb1cf and reverts most of
that but it's helpfully mixed with other stuff.
InputAttributes are not const, they're strdup'd everywhere but the test code
and freed properly. Revert the const char changes and fix the test up instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Checked against randrproto.txt & randr.h
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Flagged by cppcheck 1.62:
[dix/dixfonts.c:1792]: (error) Common realloc mistake:
'font_path_string' nulled but not freed upon failure
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
A client which is ready, but hasn't run for a while, should receive
the same benefit as one which has simply been idle for a while. Use
the smart_stop_tick to see how long it has been since a client has
run instead of smart_check_tick, which got reset each time a client
was ready, even if it didn't get to run.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
This just removes the comment markers from around the formals in
several function prototypes near where pointer -> void * changes were
made. There are plenty more of these to fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Lots more const char stuff.
Remove duplicate defs of CoreKeyboardProc and CorePointerProc from
test/xi2/protocol-common.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
As usual, mostly const char changes. However, filter_device_events had
a potentially uninitialized value, 'raw', which I added a bunch of
checks for. I suspect most of those are 'can't happen', but it's hard
to see that inside the function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
CheckPassiveGrabsOnWindow() calls AllocGrab() which can fail and return NULL.
This return value is not checked, and can cause NULL pointer dereferences.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
GrabDevice() calls AllocGrab() which can fail and return NULL.
This return value is not checked, and can cause NULL pointer dereferences.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If either the initial calloc or the xi2mask_new fails, grab is NULL,
but if a src grab is passed in, it was always being written to by
CopyGrab (and if that failed, dereferenced again in teardown).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Since we're using RedirectAutomatic to do this, we don't actually
preserve contents when unmapped.
v2: Don't say WhenMapped if Composite didn't initialize [vsyrjala]
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
A default timeslice of 20ms means a pathological client can ruin up to
two frames per scheduler tick. And a fifth of a second is just insane.
Pick two different numbers out of the hat. A 5ms slice means you can
probably keep up with two or three abusive clients, and letting it burst
to 15ms should give you about all the timeslice you need for a
fullscreen game (that's doing server-side rendering for some reason).
If you're running on a system with a 10ms granularity on SIGALRM, then
this effectively changes the intervals to 10ms and 30ms. Which is still
better, just not as better.
I suspect this is about as good as we can do without actually going
preemptive, which is an entire other nightmare.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This allocates a new region structure and copies a source region into
it in a single API rather than forcing the caller to do both steps themselves.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The time between the idle reset and the IdleTimeWakeupHandler to be called is
indeterminate. Clients with an PositiveTransition or NegativeTransition alarm
on a low threshold may miss an alarm.
Work around this by keeping a reset flag for each device. When the
WakeupHandler triggers and the reset flag is set, we force a re-calculation of
everything and pretend the current idle time is zero. Immediately after is the
next calculation with the real idle time.
Relatively reproducible test case: Set up a XSyncNegativeTransition alarm for
a threshold of 1 ms. May trigger, may not.
X.Org Bug 70476 <http://bugs.freedesktop.org/show_bug.cgi?id=70476>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
And now that we have the accessors, localize it. No functional changes, just
preparing for a future change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Save a pointer to the passed in closure structure before copying it
and overwriting the *c pointer to point to our copy instead of the
original. If we hit an error, once we free(c), reset c to point to
the original structure before jumping to the cleanup code that
references *c.
Since one of the errors being checked for is whether the server was
able to malloc(c->nChars * itemSize), the client can potentially pass
a number of characters chosen to cause the malloc to fail and the
error path to be taken, resulting in the read from freed memory.
Since the memory is accessed almost immediately afterwards, and the
X server is mostly single threaded, the odds of the free memory having
invalid contents are low with most malloc implementations when not using
memory debugging features, but some allocators will definitely overwrite
the memory there, leading to a likely crash.
Reported-by: Pedro Ribeiro <pedrib@gmail.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Use the grabtype to determine which type of event to send - all other events
are pointless and may result in erroneous events being delivered.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For an active grab, grab->eventMask can be either the core or the XI1 mask.
With the overlap of event filters, calling DeliverOneGrabbedEvent(XI1) for a
ProximityOut event will trigger if the client has selected for enter events -
the filter is the same for both.
Thus, we end up delivering a proximity event to a client not expecting one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a client calls XAllowEvents(SyncPointer) it expects events as normal until
the next button press or release event - that freezes the device. An e.g.
proximity event must thus not freeze the pointer.
As per the spec, only button and key events may do so, so narrow it to these
cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no reason to do this as (nmasks + 2) callocs, and it's a
surprisingly hot path. Turns out you hit this ~once per passive grab,
and you do a few bajillion passive grab changes every time you enter or
leave the overview in gnome-shell. According to a callgrind of Xorg
with gnome-shell-perf-tool run against it:
Ir before: 721437275
Ir after: 454227086
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no reason not to, and it simplifies quite a few callers.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
It's already not optional at configure time, this just makes it so at
build time too.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
CreateCursor (Xlib call XCreatePixmapCursor) with a non-bitmap
source pixmap and a None mask is supposed to error out with BadMatch,
but didn't.
From der Mouse <mouse@Rodents-Montreal.ORG>, changed following
comments by Alan Coopersmith <alan.coopersmith@oracle.com>.
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
if the grab type isn't XI2, grab->xi2mask is random. That random data may
have the enter/leave mask set, leading to events sent to the client that the
client can't handler.
Source of these errors:
_xgeWireToEvent: Unknown extension 131, this should never happen.
Simplest reproducer:
Start Xephyr, press button inside window, move out. As the pointer leaves
the Xephyr window, the errors appear.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If we have a client which has registered for a DeviceButton grab
be sure to pass this to CheckDeviceGrabAndHintWindow(). Since the
order of clients is arbitrary there is no guarantee that the last
client in the list is the one that belongs to this class.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XI 1.x only allows for first + num valuators, so if a device sends data for
valuators 0 and 2+ only (i.e. valuator 1 is missing) we still need to get
the data for that from somewhere.
XI 1.x uses the hack of an unset valuator mask to get the right coordinates,
i.e. we set the value but don't set the mask for it so XI2 events have the
right mask.
For an absolute device in relative mode, this broke in b28a1af55c, the
value was now always 0. This wasn't visible on the cursor, only in an XI 1.x
client. The GIMP e.g. sees jumps to x/0 every few events.
Drop the condition introduced in b28a1af55c, data in valuators is always
absolute, regardless of the mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
grab->type is only non-zero for passive grabs. We're checking an active grab
here, so we need to check if the touch mask is set on the grab.
Test case: grab the device, then start two simultaneous touches. The
grabbing client won't see the second touchpoints because grab->type is 0
and the second touch is not an emulating pointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XQuartz already conditionally renames main() as dix_main() so it can provide
it's own main(). This isn't the ideal way of doing this, as it prevents libdix
built this way from being useful with any other DDX.
So instead, always name that function dix_main(), and also provide a stub main()
which just calls dix_main(), which can be overriden in the DDX.
Add a main() to XWin (XQuartz already has one, of course).
It's no longer neccessary to link XWin and XQuartz with libmain.
v2: Remove unneeded stub main hw/xwin/InitOutput.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The peculiar way we handle coordinates results in relative coordinates on
absolute devices being added to the last value, then that value is mapped to
the screen (taking the device dimensions into account). From that mapped
value we get the final coordinates, both screen and device coordinates.
To avoid uneven scaling on relative coordinates, they are pre-scaled by
screen ratio:resolution:device ratio factor before being mapped. This
ensures that a circle drawn on the device is a circle on the screen.
Previously, we used the ratio to scale x up. Synaptics already does its own
scaling based on the resolution and that is done by scaling y down by the
ratio. So we can remove the code from the driver and get approximately the
same behaviour here.
Minor ABI bump, so we can remove this from synaptics.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Emmanuel Benisty <benisty.e@gmail.com>
A constant deceleration of x simply means (delta * 1/x). We limited that to
values >= 1.0f for obvious reasons, but can also allow values from 0-1.
That means that ConstantDeceleration is actually a ConstantAcceleration, but
hey, if someone needs it...
X.Org Bug 66134 <http://bugs.freedesktop.org/show_bug.cgi?id=66134>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Ungrabbing a device during an active touch grab rejects the grab. Ungrabbing
a device during an active pointer grab accepts the grab.
Rejection is not really an option for a pointer-emulated grab, if a client
has a button mask on the window it would get a ButtonPress emulated after
UngrabDevice. That is against the core grab behaviour.
X.Org Bug 66720 <http://bugs.freedesktop.org/show_bug.cgi?id=66720>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This shouldn't have been in the patch
Reported-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
defmin/defmax are screen coords and thus use a min-inclusive, max-exclusive
range. device axes ranges are inclusive, so bump the max up by one to get the
scaling right.
This fixes off-by-one coordinate errors if the coordinate matrix is used to
bind the device to a fraction of the screen. It introduces an off-by-one
scaling error in the device coordinate range, but since most devices have a
higher resolution than the screen (e.g. a Wacom I4 has 5080 dpi) the effect
of this should be limited.
This error manifests when we have numScreens > 1, as the scaling from
desktop size back to screen size drops one device unit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
commit 61a99aff9d
dix: pre-scale relative events from abs devices to desktop ratio (#31636)
added pre-scaling of relative coordinates coming from absolute devices to
undo uneven scaling based on the screen dimensions.
Devices have their own device width/height ratio as well (in a specific
resolution) and this must be applied for relative devices as well to avoid
scaling of the relative events into the device's ratio.
e.g. a Wacom Intuos4 6x9 is in 16:10 format with equal horiz/vert
resolution (dpi). A movement by 1000/1000 coordinates is a perfect diagonal
on the tablet and must be reflected as such on the screen.
However, we map the relative device-coordinate events to absolute screen
coordinates based on the axis ranges. This results in an effective scaling
of 1000/(1000 * 1.6) and thus an uneven x/y axis movement - the y
axis is always faster.
So we need to pre-scale not only by the desktop dimenstions but also by the
device width/height ratio _and_ the resolution ratio.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ProcessTouchEvents() calls UDS for all touch events, but if the event type
was switched to TouchUpdate(pending end) UDS is a noop.
Daniel Drake found this can cause stuck buttons if a touch grab is
activated, rejected and the touch event is passed to a regular listener.
This sequence causes the TouchEnd to be changed to TouchUpdate(pending end).
The actual TouchEnd event is later generated by the server once it is passed
to the next listener. UDS is never called for this event, thus the button
remains logically down.
A previous patch suggested for UDS to handle TouchUpdate events [1], however
this would release the button when the first TouchEvent is processed, not
when the last grab has been released (as is the case for sync pointer
grabs). A client may thus have the grab on the device, receive a ButtonPress
but see the button logically up in an XQueryPointer request.
This patch adds a call to UDS to TouchEmitTouchEnd(). The device state must
be updated once a TouchEnd event was sent to the last grabbing listener and
the number of grabs on the touchpoint is 0.
[1] http://patchwork.freedesktop.org/patch/13464/
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The cursor is referenced during CopyGrab(), thus doesn't need to be handled
manually anymore. It does need to be refcounted for temp grabs though.
The oldGrab handling in ProcGrabPointer is a leftover from the cursor in the
grab being refcounted, but the grab itself being a static struct in the
DeviceIntRec. Now that all grabs are copied, this lead to a double-free of
the cursor (Reproduced in Thunderbird, dragging an email twice (or more
often) causes a crash).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A client may call XIGrabDevice twice, overwriting the existing grab. Thus,
make sure we free the old copy after we copied it. Free it last, to make
sure our refcounts don't run to 0 and inadvertantly free something on the
way.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
TouchListenerGone cleans up if a client disappears. Having this in
FreeGrab() triggers cyclic removal of grabs, emitting wrong events. In
particular, it would clean up a passive grab record while that grab is
active.
Move it to CloseDownClient() instead, cleaning up before we go.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Introduced in xorg-server-1.13.99.901-2-g9ad0fdb. Storing the grab pointer
in the listener turns out to be a bad idea. If the grab is not an active
grab or an implicit grab, the pointer stored is the one to the grab attached
on the window. This grab may be removed if the client calls UngrabButton or
similar while the touch is still active, leaving a dangling pointer.
To avoid this, copy the grab wherever we need to reference it later. This
is also what we do for pointer/keyboard grabs, where we copy the grab as
soon as it becomes active.
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Obsolete since 4bc2761ad5. This struct
existed so copying a passive grab could be simply done by
activeGrab = *grab
and thus have a copy of the GrabPtr we'd get from various sources but still
be able to check device->grab for NULL.
Since 4bc2761 activeGrab is a pointer itself and points to the same memory
as grabinfo->grab, leaving us with the potential of dangling pointers if
either calls FreeGrab() and doesn't reset the other one.
There is no reader of activeGrab anyway, so simply removing it is
sufficient.
Note: field is merely renamed to keep the ABI. Should be removed in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Change the single if condition in the loop body to a
if (!foo) continue;
and re-indent the rest.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A sync grab is the owner once it gets events. If it doesn't replay the
event it will get all events from this touch, equivalent to accepting it.
If the touch has ended before XAllowEvents() is called, we also now need to
send the TouchEnd event and clean-up since we won't see anything more from
this touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device is frozen in results to a grab, we need to enqueue the events.
This makes things complicated, and hard to follow since touch events are now
replayed in the history, pushed into EnqueueEvent, then replayed later
during PlayReleasedEvents in response to an XAllowEvents.
While the device is frozen, no touch events are processed, so if there is a
touch client with ownership mask _below_ the grab this will delay the
delivery and potentially screw gesture recognition. However, this is the
behaviour we have already anyway if the top-most client is a sync pgrab or
there is a sync grab active on the device when the TouchBegin was generated.
(also note, such a client would only reliably work in case of ReplayPointer
anyway)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device is currently grabbed as the result of a passive grab
activating, do not prepend that grab to the listeners (unlike active grabs).
Otherwise, a client with a passive pointer grab will prevent touch grabs
from activating higher up in the window stack.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If drivers supply incorrect values don't just quietly return False, spew to
the log so we can detect what's going on. All these cases are driver bugs
and should be fixed immediately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
InitPointerClassDeviceStruct/InitKeyboardDeviceStruct allocate a
proximity/focus class, respectively. If a driver calls
InitFocusClassDeviceStruct or InitProximityClassDeviceStruct beforehand,
the previously allocated class is overwritten, leaking the memory.
Neither takes a parameter other than the device, so we can simply skip
initialising it if we already have one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
==21860== 24 bytes in 1 blocks are still reachable in loss record 85 of 397
==21860== at 0x4C2B3F8: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==21860== by 0x61ED93: AllocateOutputBuffer (io.c:1037)
==21860== by 0x61E15A: WriteToClient (io.c:764)
==21860== by 0x457B30: ProcQueryExtension (extension.c:275)
==21860== by 0x43596B: Dispatch (dispatch.c:432)
==21860== by 0x425DAB: main (main.c:295)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
DeleteCallbackManager() introduced for better symmetry in the caller, they
do the same thing.
==20085== 24 bytes in 1 blocks are still reachable in loss record 11 of 103
==20085== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==20085== by 0x43A097: CreateCallbackList (dixutils.c:837)
==20085== by 0x43A1D3: AddCallback (dixutils.c:869)
==20085== by 0x4B1736: GEExtensionInit (geext.c:209)
==20085== by 0x41C8A8: InitExtensions (miinitext.c:389)
==20085== by 0x5AC918: main (main.c:208)
==2042== 8 bytes in 1 blocks are still reachable in loss record 2 of 97
==2042== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2042== by 0x4C2A657: realloc (vg_replace_malloc.c:525)
==2042== by 0x4802F5: XNFrealloc (utils.c:1095)
==2042== by 0x43A17A: CreateCallbackList (dixutils.c:855)
==2042== by 0x43A1EF: AddCallback (dixutils.c:870)
==2042== by 0x4B1752: GEExtensionInit (geext.c:209)
==2042== by 0x41C8A8: InitExtensions (miinitext.c:389)
==2042== by 0x5AC9E4: main (main.c:208)
==2042==
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Heaps of these:
==2042== 15,360 bytes in 120 blocks are still reachable in loss record 94 of
97
==2042== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2042== by 0x4C2A657: realloc (vg_replace_malloc.c:525)
==2042== by 0x45FB91: double_size (registry.c:65)
==2042== by 0x45FC97: RegisterRequestName (registry.c:85)
==2042== by 0x460095: RegisterExtensionNames (registry.c:179)
==2042== by 0x460729: dixResetRegistry (registry.c:334)
==2042== by 0x5AC992: main (main.c:201)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
==2547== 1 bytes in 1 blocks are still reachable in loss record 1 of 111
==2547== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2547== by 0x64D1551: strdup (strdup.c:43)
==2547== by 0x4802FB: Xstrdup (utils.c:1113)
==2547== by 0x585B6C: XkbSetRulesUsed (xkbInit.c:219)
==2547== by 0x58700F: InitKeyboardDeviceStruct (xkbInit.c:595)
==2547== by 0x419FA3: vfbKeybdProc (InitInput.c:74)
==2547== by 0x425A3D: ActivateDevice (devices.c:540)
==2547== by 0x425F65: InitAndStartDevices (devices.c:713)
==2547== by 0x5ACA57: main (main.c:259)
and a few more of the above.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
I didn't think we needed this before, but after doing some more
work with reverse optimus it seems like it should be called.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
this allows the pixmap dirty helper to be used for reverse optimus,
where the GPU wants to copy from the shared pixmap to its VRAM copy.
[airlied: slave_dst is wrong name now but pointless ABI churn at this point]
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We should have no problem allowing output/offload from the same slave,
I asserted here, but in order to implement reverse optimus this makes
perfect sense. (reverse optimus is intel outputting to nvidia).
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
==15562== 1,800 bytes in 1 blocks are definitely lost in loss record 298 of 330
==15562== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==15562== by 0x4312C7: InitTouchClassDeviceStruct (devices.c:1644)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Slave devices don't need these and the matching code in CloseDevice() has a
IsMaster() condition on freeing these, causing a leak.
==16111== 384 bytes in 4 blocks are definitely lost in loss record 72 of 105
==16111== at 0x4C28BB4: calloc (vg_replace_malloc.c:467)
==16111== by 0x42AEE2: AllocDevicePair (devices.c:2707)
==16111== by 0x4BAA27: AllocXTestDevice (xtest.c:617)
==16111== by 0x4BA89A: InitXTestDevices (xtest.c:570)
==16111== by 0x425F5E: InitCoreDevices (devices.c:690)
==16111== by 0x5ACB2D: main (main.c:257)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Fixes reading random memory read beyond the end of original event.
sizeof device_event: 424
sizeof internal_event: 2800
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Unlike pointer/keyboard events, the flags field for ET_Touch* is a set of
server-internal defines that we need to convert to XI protocol defines.
Currently only two of those defines actually translate to the protocol, so
make sure we don't send internal garbage down the wire.
No effect to current clients since they shouldn't look at undefined bits
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
e02f864fdf "Suppress cursor display until the first XDefineCursor() request"
disabled cursor display a priori unless -retro is given.
On a plain server, caling XFixesHideCursor() and XFixesShowCursor() would
show the default root cursor, despite no client actually defining a cursor.
Change the logic, disable CursorVisible by default and only enable it from
the window's CWCursor logic. If no window ever defines a cursor, said cursor
stays invisible.
X.Org Bug 58398 <http://bugs.freedesktop.org/show_bug.cgi?id=58398>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
==5712== 6 bytes in 1 blocks are still reachable in loss record 17 of 585
==5712== at 0x4A074CD: malloc (vg_replace_malloc.c:236)
==5712== by 0x3D1DE885B1: strndup (strndup.c:46)
==5712== by 0x41CB71: MakeAtom (atom.c:121)
==5712== by 0x55AE3E: XIGetKnownProperty (xiproperty.c:401)
==5712== by 0x4251C9: AddInputDevice (devices.c:312)
==5712== by 0x42AC0C: AllocDevicePair (devices.c:2657)
==5712== by 0x425E6E: InitCoreDevices (devices.c:677)
==5712== by 0x5ACA05: main (main.c:257)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The transformation matrix we previously stored was a scaled matrix based on
the axis ranges of the device. For relative movements, the scaling is not
required (or desired).
Store two separate matrices, one as requested by the client, one as the
product of [scale . matrix . inv_scale]. Depending on the type of movement,
apply the respective matrix.
For relative movements, also drop the translation component since it doesn't
really make sense to use that bit.
Input ABI 19
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Set on DeviceEnterLeaveEvent() the xXIEnterEvent->focus field
similarly to how the CoreEnterLeaveEvent() function above does
for core events.
This fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=677329
reported to GTK+, where focus handling on window managers with
sloppy focus or no window manager present was broken due to this
field being always set to FALSE.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XTest devices are the first ones in the list, being initialised together
with the master devices. If we disable the devices in-order and a device has
a button down when being disabled, the XTest device is checked for a
required button release (xkbAccessX.c's ProcessPointerEvent). This fails if
the device is already NULL.
Instead of putting the check there, disable the devices in the reverse order
they are initialised. Disable physical slaves first, then xtest devices,
then the master devices.
Testcase: shut down server with a button still held down on a physical
device
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Absolute devices may send relative events depending on the mode (synaptics
by default, wacom per option). The relative events are added to the previous
position, converted into device coordinates and then scaled into desktop
coordinates for pointer movement.
Because the device range must be mapped into the desktop coordinate range,
this results in uneven scaling depending dimensions, e.g. on a setup with
width == 2 * height, a relative movement of 10/10 in device coordinates
results in a cursor movement of 20/10 (+ acceleration)
Other commonly user-visible results:
* the touchpad changing acceleration once an external monitor as added.
* drawing a circle on a wacom tablet in relative mode gives an ellipsis in
the same ratio as the desktop dimensions.
Solution: pre-scale the incoming relative x/y coordinates by width/height
ratio of the total desktop size. Then add them to the previous
coordinates and scale back with the previous mapping, which will undo the
pre-scaling and give us the right movement.
X.Org Bug 31636 <http://bugs.freedesktop.org/show_bug.cgi?id=31636>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If we're already using our own custom macro, might as well use it properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This is mostly sigsafe code, so use sigsave printf. And update some fields
to double that used to be int.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
For absolute events, if the client specifies a screen number offset the
coordinates by that. And add a new flag so we know when _not_ to add the
screen offset in GPE.
Without this offset and the flag, GPE would simply add the offset of the
current screen if POINTER_SCREEN is set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Scaled is already in desktop coordinates, take the total width into account,
not just the current screen's width.
Fixes Xdmx pointer position calculation.
X.Org Bug 51904 <http://bugs.freedesktop.org/show_bug.cgi?id=51904>
Signed-off-by: Sybren van Elderen <sowmestno@msn.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetTouchEvents is usually called in a signal context.
Calling ErrorF for the error messages leads to X complaining about log:
(EE) BUG: triggered 'if (inSignalContext)'
(EE) BUG: log.c:484 in LogVMessageVerb()
(EE) Warning: attempting to log data in a signal unsafe manner while in signal context.
Please update to check inSignalContext and/or use LogMessageVerbSigSafe() or ErrorFSigSafe().
The offending log format message is:
%s: Attempted to start touch without x/y (driver bug)
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a XI2.1+ client has a grab on a non-root window, it must still receive
raw events on the root window.
Test case: register for XI_ButtonPress on window and XI_RawMotion on root.
No raw events are received once the press activates an implicit grab on the
window.
X.Org Bug 53897 <http://bugs.freedesktop.org/show_bug.cgi?id=53897>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Should've been removed in bc1f90a615018c05994fae3e678dd2341256cd82a, but got
left here due to a botched rebase.
Fixes stray button events sent to clients after deactivating an async
pointer grab on a pointer-emulating-touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
events.c: In function 'DeactivatePointerGrab':
events.c:1524:51: warning: 'dev' may be used uninitialized in this function
[-Wuninitialized
dev is unset when we get here, the device to check is "mouse".
Introduced in ece8157a59.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Instead of guessing what resource type the listener is and what property to
retrieve, store the resource type in the listener directly.
Breaks XIT test cases:
TouchGrabTestMultipleTaps.PassiveGrabPointerEmulationMultipleTouchesFastSuccession
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=56557
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
This places a pointer to the grab related to a TouchListener directly
in the TouchListener structure rather than hoping to find the grab
later on using the resource ID.
Passive grabs have resource ID in the resource DB so they can be
removed when a client exits, and those resource IDs get copied when
activated, but implicit grabs are constructed on-the-fly and have no
resource DB entry.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Conflicts:
Xi/xichangehierarchy.c
Small conflict with the patch from
Xi: don't use devices after removing them
Was easily resolved by hand.
Signed-off-by: Keith Packard <keithp@keithp.com>
GrabMask is a union of core, XI1 and XI2 masks. If a XI2 grab is activated,
the value is a random pointer value, using it as mask has unpredictable
effects.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If a client has a core grab, don't allow re-grabbing with type XI2, etc.
This was the intent of the original commit
xorg-server-1.5.99.1-782-g09f9a86, but ineffective.
X.Org Bug 58255 <http://bugs.freedesktop.org/show_bug.cgi?id=58255>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Only deliver to the client that created the barrier, not to other clients.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Instead of having the pointer barrier code enqueue events separately from
GetPointerEvents, pass the event list through and let it add to it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This adds support for clients that would like to get a notification
every time a barrier is hit, and allows clients to temporarily release
a barrier so that pointers can go through them, without having to
destroy and recreate barriers.
Based on work by Chris Halse Rogers <chris.halse.rogers@canonical.com>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For touch selection conflicts, we need to check not only if the mask is set
for the device, but if it is set for only that specific device (regardless
of XIAll*Devices)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>