xf86-input-evdev (since "smooth scrolling" support was added) can send mouse
motion and wheel events in one batch, so we need to handle it properly.
Otherwise mouse wheel events which come with motion events are lost
and separate mouse wheel events are handled through non-DGA path.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This macro did lookups via privates but we can just use the ScreenToScrn
conversion instead.
This patch drops all in-server uses, we should drop the macro later,
once drivers have been converted to not use it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
migrate to new helper API.
This just wraps all the obvious uses of xf86Screens[pScreen->myNum],
and should be fairly simple to review.
v2: remove commented out lines.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are just simple functions that we should start migrating drivers
to using.
The end goal is to remove xf86Screens and screenInfo from the ABI.
This includes a define XF86_HAS_SCRN_CONV that drivers can ifdef to provide
their own copies. I'll probably post a generic compat.h file for drivers later.
v2: add asserts.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently if we claim a slot for a PCI driver, we never let it go properly,
this prevents the fallback probe from reusing the slot, even though it
isn't claimed for that pci slot.
So if you set the modesetting driver to point at a specific kms device,
that isn't a PCI device (i.e. USB dongle), then the modesetting driver
loads, the pci probe tries to bind the config slot to the primary PCI
device, however we then check the kms device bus id to discover it
isn't valid. However we don't remove the claim on the slot. Next the
old probe function is called and there is no slots to claim.
This patch fixes that and converts the pciSlotClaimed boolean into
a counter, and changes the unclaim api to take a device pointer
to remove from the entity.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to use udev for gpu enumeration, we need to init udev earlier
than input initialisations. This splits the config init stuff so that udev
pre init sets up before output initialisation.
this is just a prepatory patch, doesn't change anything major.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add the modesetting driver to the fallback list on Linux, after vesa
before fbdev.
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The functions are already declared in xf86xv.h
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If a device was enabled before the VT switch, re-enabled it. Otherwise leave
it as is, there was probably a reason why it was disabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Cygwin doesn't have ELF rpath capabilities, so these libraries need
to be loaded before the drivers (namely dummy and nested) which
depend on their symbols.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This is necessary when building Xorg and XWin simultaneously, otherwise
undefined symbol errors result in sdksyms.c.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Rename functions/macros from list_* to xorg_list_*
Rename struct from struct list to struct xorg_list.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In-sed-I-trust: Peter Hutterer <peter.hutterer@who-t.net>
Check for identifier first and bail if it's missing (also remove the current
identifier check after we've already bailed due to missing identifiers)
If a driver is missing, warn but also say that we may have added this device
already. I see too many bugreports with incorrectly shortened log files.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Side effect of aa0bfb0f133481c57762012e8e30c05ffa151423:
| CCLD Xorg
| sdksyms.o:(.data.rel+0x27d8): undefined reference to `outl'
| collect2: ld returned 1 exit status
Since the linux/ia64 domain I/O support code got removed in that
commit, there's no reason to keep on declaring those functions
(inb, inl, inw, outb, outl, outw).
Bugzilla: https://bugs.freedesktop.org/43985
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
New additions to the API:
- InitTouchClassDeviceStruct
- xf86PostTouchEvent
Changes to the ABI:
- DeviceIntRec now contains a TouchClassPtr
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
xf86PostTouchEvent is the driver API to submit touch events to the server.
This API doesn't do anything yet though but now we can at least bump the
API.
For valuators, drivers should use the existing xf86InitValuatorAxisStruct
function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This allows us to run the server as a normal user whilst still
being able to use the -modulepath, -logfile and -config switches
We define a xf86PrivsElevated which will do the checks and cache
the result in case it is called more than once.
Also renamed the paths #defines to match their new meaning.
Original discussion which led to this patch can be found here:
http://lists.freedesktop.org/archives/xorg-devel/2011-September/025853.html
Signed-off-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Michal Suchanek <hramrach at centrum.cz>
Reviewed-by: Jamey Sharp <jamey at minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Both functions call exit() at the end and have no other return path.
Also correct comment/heading to reflect commit 6450f6ca7e moving
DoShowOptions into xf86Configure.c.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Since all we do with the option list is walk down the list printing
the names, there's no need to cast away its constness.
Clears gcc warning:
xf86Configure.c: In function 'DoShowOptions':
xf86Configure.c:781:4: warning: cast discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If we didn't go into the if (!autoconfig) { } block, the filename,
dirname, and sysdirname pointers were never initialized, but we
freed them outside the block, leading to potential memory corruption.
Move the frees inside the block where they're initialized to avoid this.
To avoid similar problems, move the declarations of the variables that
are only used in this block inside the block.
Regression introduced by commit 3d635fe84d
Found by gcc warning:
xf86Config.c: In function 'xf86HandleConfigFile':
xf86Config.c:2303:11: warning: 'filename' may be used uninitialized in this function
xf86Config.c:2303:22: warning: 'dirname' may be used uninitialized in this function
xf86Config.c:2303:32: warning: 'sysdirname' may be used uninitialized in this function
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It will never return NULL, so don't try to handle a NULL condition,
since that just confuses programmers and static analyzers.
It uses calloc, so all the allocated memory is cleared, so there's
no point looping over the memory to manually initialize it NULL.
And just because it's annoying, it doesn't need to be the only
place in this file to do if (NULL==...) instead of if (... == NULL).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Avoids the dummy-event dance if we have an event type and need to get the
matching XI2 type.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
We call xf86penConfigDirFiles twice, so we overwrite the configDirPath
variable, losing the pointer. If we move the pointer management to the
upper layer (the function callers), they will be able to call these
functions as many times as they want, but they'll have to free those
returned values.
v2: don't leak inside XWin
4,097 bytes in 1 blocks are definitely lost in loss record 625 of 632
at 0x4C2779D: malloc (in vgpreload_memcheck-amd64-linux.so)
by 0x4D7899: DoSubstitution (scan.c:615)
by 0x4D87B0: OpenConfigDir (scan.c:845)
by 0x4D8A2D: xf86openConfigDirFiles (scan.c:955)
by 0x49031F: xf86HandleConfigFile (xf86Config.c:2327)
by 0x49A9BF: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This batch is the straightforward set - others are more complex and
need more analysis to determine right size to pass.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Found no calls from current driver modules
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Gets rid of duplicate static copy of optionTypeToString by putting
both callers of that helper function in the same source file.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When we want to print a string, it's okay to just print it.
We don't need to first allocate a buffer 2 bytes bigger than the
string, copy the entire string unmodified to the buffer, print the
buffer, and then leak the buffer (though we AbortDDX 8 lines later,
and then just in case we survived that, call exit as well, so the
leak is short lived, just oh so pointless).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
As long as we're carrying around a compatibility copy in os/strl*.c,
might as well use them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
We don't ship either one, so don't waste time and make confusing log
entries trying to load them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Wherever it's obvious which device we need (keyboard or pointer), use
GetMaster() instead of GetPairedDevice(). It is more reliable in actually
getting the device type we want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xorg.conf devices had the name and driver set in the DDX's InputInfoPtr list
but not in the option list for those devices. That information was lost when
passing the options into NewInputDeviceRequest. NIDR then refused to start
the devices.
Introduced in xorg-server-1.11.0-250-ge4cd24e
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: James Cloos <cloos@jhcloos.com>
Marcin Slusarz
Keith Packard
Dave Airlie
Dave Airlie
Alan Coopersmith
Michal Suchanek
Peter Hutterer
Yaakov Selkowitz
Jeremy Huddleston
Cyril Brulebois
Daniel Stone
Antoine Martin
Paulo Zanoni
Chris Wilson