Some hardware (preferably mobile) working on GLES3 way faster than
on desktop GL and supports more features. This commit will allow using
GLES3 if glamor is running over GL ES, and version 3 is supported.
Changes are the following:
1. Add compatibility layer for 120/GLES2 shaders with defines in and out
2. Switch attribute and varying to in and out in almost all shaders
(aside gradient)
3. Add newGL-only frag_color variable, which defines as gl_FragColor on
old pipelines
4. Switch all shaders to use frag_color.
5. Previous commit is reverted, because now we have more than one GL ES
version, previous commit used to set version 100 for all ES shaders, which
is not true for ES 3
Signed-off-by: Konstantin Pugin <ria.freelander@gmail.com>
This script runs with -e, so if the timeout command returns a non-0
exit status (meaning the while loop timed out), the script exits
immediately as well.
This would leave weston running in the background, which resulted in
meson waiting for weston to terminate until hitting meson's own timeout.
Instead, explicitly kill weston whenever the shell exits. This results
in meson recording the test as failed immediately.
As a bonus, we can drop the special handling around run-piglit.sh.
v2:
* Use trap (José Expósito)
v3:
* Explicitly use bash, and document a bashism we rely on
(Olivier Fourdan)
If we fail to setup EI, give up on using EI for XTEST and restore the
default XTEST handlers.
This happens when neither the portal nor the socket backends are usable.
This does not affect the portal operation though, if the user choose not
to allow a particular client, Xwayland would continue to use EI.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
With EI support wired to XTEST, and oeffis being enabled unconditionally
means that Xwayland will always go through the XDG portal for XTEST when
supported.
While this the intended behavior for the general use case of Xwayland
running rootless on a desktop compositor, that breaks when Xwayland is
running on a nested compositor, because the portal is for the entire
session and not limited to the nested Wayland compositor.
Xwayland itself, as a regular Wayland client, has no way to tell that it
is running on a nested compositor.
So to keep backward compatibility with existing (and also common) use
cases such as nested compositors, best is to disable support for the XDG
portal by default, and add a new command line option "-enable-ei-portal"
for the Wayland compositors (who spawn Xwayland rootless) to explicitly
enable support for the input emulation XDG portal in Xwayland.
A Wayland compositor running nested should not use that command line
option with Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Fixes: a1333342 - xwayland: Add XTEST support using EIS
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1586
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/3047
Some drivers might not support explicit format modifiers. On these
drivers `gbm_bo_create_with_modifiers()` will fail and the
`gbm_bo_create()` code path will be used instead.
In this case, if the LINEAR modifier is advertised (and the INVALID
modifier is not) add the `GBM_BO_USE_LINEAR` flag.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1438
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: José Expósito's avatarJosé Expósito <jexposit@redhat.com>
When running the xserver:xwayland / XTS test in an environment where
an X server is running for :0, Xwayland fails to start with error:
(EE)
Fatal server error:
(EE) Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
(EE)
And the `timeout` command fails instead of waiting for Weston to
initialize.
Add the `-displayfd` parameter to Xwayland to avoid this issue.
The `-displayfd` parameter lets Xwayland pick an unused display number,
avoiding the start up error when an X server is already active for :0,
the default display number.
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: José Expósito <jexposit@redhat.com>
This can happen if the window has never completed a Present operation.
Fixes: 4230176080 ("xwayland/present: Embed present_vblank_rec in xwl_present_event")
GLES3.2 spec, page 126:
> The variable gl_PointSize is intended for a shader to write
> the size of the point to be rasterized. It is measured in pixels.
> If gl_PointSize is not written to, its value
> is undefined in subsequent pipe stages.
If glamor shader is use points, we should define gl_PointSize for GLES.
On Desktop GL, it "just work" due to default gl_PointSize is 1.
As @anholt requested, define this only for minimal amount of shaders
(point and glyphbit ones), to make sure than performance will not
affected
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Konstantin <ria.freelander@gmail.com>
If there is no quads to draw, then we have a possibility to call
glDrawElements with type as zero, which will generate
GL_INVALID_ENUM error. While this error is harmless, it is annoying.
Signed-off-by: Konstantin <ria.freelander@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When neither `wayland-info` nor `weston-info` are installed, the
`xwayland-piglit.sh` script will wait indefinitely for the compositor
to start.
Use `Xwayland -pogo` instead to wait until weston is initialized.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1536
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: José Expósito <jexposit@redhat.com>
If a client tries to send XTEST events while there is no sendEventsProc
defined for the given device, Xwayland would call into 0x0 and crash.
Make sure the handler is defined before trying to use it, to avoid the
crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1574
This is more portable than libbsd as everything Just Works, even on BSD systems,
and is the recommended method of consuming libbsd nowadays.
It also helpfully lets things work with glibc-provided functions for new
enough glibc.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/973
Co-authored-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Sam James <sam@gentoo.org>
We specify a sensible default geometry for decorated rootful windows,
but not for undecorated ones. Make the default geometry apply to rootful
windows in general.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
While we now have support for resize of the root window through
libdecor, we still ignore toplevel configure dimensions when libdecor is
not in use. This ignores user intent in many Wayland servers, and some
xdg_toplevel states when active have strong requirements for adherence
to configure dimensions.
Resize in response to xdg_toplevel configure dimensions like we do for
libdecor configure events.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
The upcoming handling of plain xdg_toplevel.configure events will need
to use the xwl_window resize helper. Move it outside XWL_HAS_LIBDECOR,
move the remaining dimension logic from handle_libdecor_configure into
it and update the name accordingly.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
When handling libdecor configure, we first update our xwl output and
screen if dimensions differ from the current xwl_screen, and then commit
a new libdecor frame which acknowledges the xdg_surface.configure event.
If the initial configure events contains non-zero dimensions, we will
update the xwl output before acknowledging the initial configure. As we
attach a buffer and commit the surface when updating the output, this
leads to a protocol error.
Instead, move the surface commit till the end of the configure handler
so it always happens after the ack.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Similar to commit 94deed272 - " xwayland: Use sensible defaults for
rootful size", mark fullscreen mode as fixed so that the actual monitor
layout is not reflected in the single fullscreen rootful window.
Without this, if "-fullscreen" is used without "-geometry", the XRandR
configuration is taken from the compositor via wl_output/xdg-output and
cannot be changed by the X11 clients.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Enforce sensible min/max values for the window size when using libdecor.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This is to avoid repeating the same code in two places.
This is essentially a cosmetic change, not a functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Allow passing an optional libdecor configuration pointer to
xwl_window_update_libdecor_size() so that we can reuse it from more than
one place and avoid duplicating that code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The configure handler in libdecor is triggered any time a new
configuration is received.
According to the documentation from libdecor, an application should
respond to that event by creating a suitable libdecor_state, and apply
it using libdecor_frame_commit().
So we ought to attach a new buffer matching the new size and commit
the Wayland surface.
The actual content of the window does not need to be explicitly
repainted, that occurs through the call to SetRootClip():
xwl_output_set_mode_fixed()
-> update_screen_size()
-> SetRootClip()
-> miHandleValidateExposures()
-> miWindowExposures()
-> miPaintWindow()
This fixes an issue with mutter where maximizing a window and then
switching to another window would sometimes resize the Xwayland window
back to its pre-maximized size, or with Weston where the Xwayland window
would initially show up black until the pointer moves to the window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This moves the code which updates the XRandR modes and sets the root
window size to its own function.
This preparation work for the next commit, no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The configure handler for libdecor, namely handle_libdecor_configure(),
is where both the content and the decorations get resized (when needed).
If for any reason, the actual size of the Xwayland screen fails to be
updated, we would still appy the expected size rather than the actual
one for the libdecor state.
To avoid this, use the actual xwl_screen width/height for the libdecor
state.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
For libdecor, we will have to attach a new buffer and commit from two
different handlers (libdecor configure and commit).
Having xwl_window_attach_buffer() separate from xwl_window_post_damage()
is to allow for that.
This commit should not introduce any functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
glamor ensures that a depth 32 pixmap backing a depth 24 window contains
fully opaque alpha channel values for the window's pixels, so we can
allow this without implicit redirection, saving pixmap storage and
intermediate copies.
Second attempt, after fixing a few regressions from the first attempt.
Consider the following window hierarchy, from ancestors to descendants:
A
|
B
|
C
If both A & C have depth 32, but B has depth 24, C must effectively
behave as if it had depth 24, even if its backing pixmap has depth 32
as well.
Fixes the xmag issue described in the GitLab issue below.
Issue: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1564
If "-decorate" is used but no "-geometry" is specified, Xwayland rootful
would take its size from the actual Wayland outputs combined.
That is not practical, especially when using multiple outputs, as the
resulting Xwayland window would be much larger than a single monitor.
To avoid that, set a sensible default size for the Xwayland decorate
window, using 640x480 to match what Xephyr does.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
libdecor support seems quite stable, no need to mark that experimental.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
By default, the Xwayland window in rootful mode was not resizable.
Make the Xwayland window resizable using libdecor in rootful mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This is preparation work for making Xwayland rootful resizeable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
glamor ensures that a depth 32 pixmap backing a depth 24 window contains
fully opaque alpha channel values for the window's pixels, so we can
allow this without implicit redirection, saving pixmap storage and
intermediate copies.
This will be needed with the next commit: If a child window completely
obscures a toplevel ancestor of different depth, the child window can
use page flipping only if the depth of the presented pixmap matches that
of the window's backing pixmap, or the former may contain pixel values
which are not suitable for the toplevel window's depth.
It's needed for a depth 24 window backed by a depth 32 pixmap, to make
sure the window's pixels sample alpha as 1.0.
v2:
* Make sure glamor_finish_access doesn't pass in a NULL pointer.
Pass the DrawablePtr directly from glamor_finish_access to
glamor_upload_boxes. This will allow for better results if the window
depth doesn't match the backing pixmap depth.
Konstantin
Michel Dänzer
Olivier Fourdan
José Expósito
Sam James
Kenny Levinsen