When we have a single output, just set it to the physical size of that
output. Otherwise try to approximate it calculating a mean m.m. per
dot. Last fallback is to default to 96 DPI.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When a new output is hot-plugged we need to not only update our internal
screen dimensions, but also the dix screen dimensions, screenInfo
dimensions and the root window dimensions.
https://bugs.freedesktop.org/show_bug.cgi?id=92273
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
There's nothing in configure to enable this, and KdTsPhyScreen isn't
defined anywhere.
[ajax: Rebase, also clean up Xfbdev]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
While we have keyboard focus, the server's xkb code is already locking
and latching modifiers appropriately while processing keyboard
events.
Since there is no guaranteed order between wl_keyboard key and
modifiers events, if we got the modifiers event with a locked or
latched modifier and then process the key press event for that
modifier we would wrongly unlock/unlatch. To prevent this, we ignore
locked and latched modifiers while any of our surfaces has keyboard
focus.
But we always need to set the xkb group index since this might be
triggered programatically by the wayland compositor at any time.
Reviewed-by: Daniel Stone <daniels@collabora.com>
output.done event can be sent even on some property change, not only
when announcing the output. Therefore we must check if we already have it
otherwise we may corrupt the list by adding it multiple times.
This fixes bug when xwayland looped indefinitely in output.done handler
and that can be reproduced following these steps (under X without
multi-monitor setup):
1) run weston --output-count=2
2) run xterm, move it so that half is on one output
and half on the other
3) close second output, try run weston-terminal
weston sends updated outputs which trigger this bug.
v2. factor out common code into function
move expecting_events into right branch
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
This makes Xwayland correctly handle a monitor getting unplugged.
[Marek]: use xorg_list_for_each_entry_safe
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Check for integer overflow before using stuff->count in a multiplication,
to avoid compiler optimizing out due to undefined behaviour, but only
after we've checked to make sure stuff->count is in the range of the
request we're parsing.
Reported-by: jes@posteo.de
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xserver/hw/xfree86/common/xf86Helper.c:1834:12: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘Atom’ [-Werror=format=]
xserver/hw/xfree86/common/xf86Helper.c:1834:12: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘Atom’ [-Werror=format=]
Atom is unfortunately unsigned long or unsigned int depending on the
architecture, so a cast is required.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
snprintf does not allocate memory, so we can never get an out-of-memory
error.
(Also, the error handler would free xwl_output after it was already
registered as an event listener.)
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
These have never been used in the history of the tree, and were
producing string literal const loss warnings.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Now since the installable libxf86config is gone, rename
libxf86config_internal to libxf86config.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The library used by the Xserver to read and parse the configuration file
could be built so that it culd be installed as a separate lib and used
by external programs.
Apparently there has not been any interest in this for quite a while as
this library has been broken for a long time now in the sense that it
was calling functions provided by the Xserver which were not implemented
for the external library.
Since this library is useless as it is anyway when built let's drop
support for it.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The correct refresh rate for this mode is 75, not 85.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Some ioctls may not be supported by the kernel however their failure
is non-fatal to the driver. Unfortunately we only know once we try
to execute the ioctl however the sematics of the fbdev driver API
doesn't allow upper layers to disable the call.
Instead of changing the fbdevHW driver API just disable the call to
this ioctl on the module level when detecting such a case.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Egbert Eich <eich@freedesktop.org>
The only drivers I can find that used this are the r128 and radeon DRI
drivers. r128 is dead and the radeon driver wasn't including Xorg's
compiler.h and still worked.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
When xf86RandR12Key is not set we will not get to the places where
these tests are done as the functions in question are not called.
In most cases we would have crashed before these checks anyway.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
This improves the case for when we paint an area without SHM.
xcb_image_subimage() is used to create a subimage for the damaged area, which
is converted to native format if necessary.
Signed-off-by: Ian Scott <ian.scott@arteris.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
This is a trivial patch that moves host_has_extension() implementation
from ephyr.c to hostx.c so that it can be called by hostx.c internal
functions. Also rename function to hostx_has_extension() for consistency.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
The X server frequently deals with SIGIO and SIGALRM interruptions.
If process execution is inside certain blocking system calls
when these signals arrive, e.g. with the kernel blocked on
a contended semaphore, the system calls will be interrupted.
Some system calls are automatically restartable (the kernel re-executes
them with the same parameters once the signal handler returns) but
only if the signal handler allows it.
Set SA_RESTART on the signal handlers to enable this convenient
behaviour.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Commit 2172714c changed behavior of capability handling, but it only
solved part of the problem. If Xwayland is launched without a capability
(e.g. no pointer device is connected when Xwayland was spinned up), and
later that capability comes, the device added will not be automatically
initialized. This patch initializes the device when the capability is
reported for the first time, thus avoiding the problem.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=81819
Signed-off-by: Boyan Ding <stu_dby@126.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is (eventually) called during
InitializeSprite() → *pScreen->SetCursorPosition → miPointerSetCursorPosition
when a device is set to floating. We don't do anything special outselves, but
we need to pass on to the next layer to make sure the device is initialized
properly. Otherwise, pScreen stays NULL and eventually crashes the server when
we try to clean up behind us.
Test case: grab a device → floats it, ungrab again → crash
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When grabbed, the slave device is floating, i.e. the master device is NULL.
CheckMotion() isn't happy with NULL. Make sure we pass the right device in,
either the master device when the device is attached, or the device itself
when it is floating.
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
A DeviceIntPtr with touch valuators is also created in order to deliver
the translated touch events. The lifetime of xwl_touch structs is tied
to the wayland ones, finishing in either wl_touch.up() or wl_touch.cancel()
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This struct holds information about each individual, ongoing touchpoint.
A list of these is held by the xwl_seat.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This was built as a hack for simple Wayland compositors like Weston
which were lazy and didn't want to configure windows server-side when
moved.
Since comboboxes and menus are separate toplevel O-R windows, this hack
breaks input as it needs to be traced normally, not simply sent to the
focused window.
X11 toolkits really do need their windows to be configured correctly
for their O-R windows comboboxes or menus other things, so let's fix
the lazy compositors and remove this.
I have tested this patch with both Weston and Mutter and neither of
them require any changes, and it fixes comboboxes and menus.
If somebody then wants to revert 73698d4, that's fine by me, so we
reduce the amount of API that DDXen have.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
A user on a nouveau-driven card ran into a problem where DVI-D-1 and
DVI-I-1 were aliasing. The simplest fix is to provide the full connector
names. While we're at it, rename the output names to match what is in
the kernel, and start counting the connectors from 1 rather than 0. The
only deviation is HDMI vs HDMI-A, which kept its original name.
This will break backwards compatibility with existing xorg.conf's that
reference output names, but the alternative is to create a separate
counting system, further disconnecting from the kernel names.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
xwayland windows ignored any key repeating settings
advertised by a compositor
v2. don't hardcode version 4 of seat
use AutoRepeatModeOn/Off
v3. use min(version, 4) when binding seat
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
<termio.h> is obsolete. Using <termios.h> instead fixes building with
musl libc.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Felix Janda <felix.janda@posteo.de>
gcc 5.1 throws a rather amusing warning here:
glxcmdsswap.c: In function ‘__glXSwapQueryExtensionsString’:
glxcmdsswap.c:439:1: warning: function might be candidate for attribute
‘noreturn’ [-Wsuggest-attribute=noreturn]
__glXSwapQueryExtensionsString(__GLXclientState * cl, GLbyte * pc)
This is entirely accurate, albeit curiously phrased: swapping some bits
hanging off the end of a null pointer will make Xdmx crash, so from the
perspective of code generation the function will indeed not return.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
some X manuals use then escape sequence \/ when they want to render
a slash. That's bad because \/ is not a slash but an italic
correction, never producing any output, having no effect at all in
terminal output, and only changing spacing in a minor way in typeset
output.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
xorg/xserver/hw/kdrive/ephyr/ephyr.c:979:9: error: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ScreenPtr’ [-Werror=format=]
This looks like a genuine bug, and ephyrCursorScreen->myNum was meant here
rather than ephyrCursorScreen
v2:
Insert a ":" as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xorg/xserver/hw/xfree86/dri/dri.c:1695:19: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘DRIContextPrivPtr’ [-Werror=format=] ^
xorg/xserver/hw/xfree86/dri/dri.c:1695:19: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘DRIContextPrivPtr’ [-Werror=format=]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Werror=format=]
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 6 has type ‘long unsigned int’ [-Werror=format=]
Use %lu for an unsigned long
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xserver/hw/xfree86/common/xf86Events.c:183:5: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘void *’ [-Werror=format=]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Descriptions for Options PageFlip and SWCursor.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds zaphod and ZaphodHeads support
to the the in-server modesetting driver.
this is based on a request from Mario,
and on the current radeon driver, along
with some patches from Mario to bring things
up to the state of the art in Zaphod.
v2: fixup vblank fd registring.
v3: squash Mario's fixes.
modesetting: Allow/Fix use of multiple ZaphodHead outputs per x-screen.
modesetting: Take shift in crtc positions for ZaphodHeads configs into account.
modesetting: Add ZaphodHeads description to man page.
small cleanups (airlied).
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
By the time we get here we've already done CloseDownDevices, so on the
second regeneration you get:
Invalid read of size 4
at 0x43402A: RemoveDevice (devices.c:1125)
by 0x427902: xwl_seat_destroy (xwayland-input.c:568)
by 0x42649C: xwl_close_screen (xwayland.c:116)
by 0x4B7F67: CursorCloseScreen (cursor.c:187)
by 0x536003: AnimCurCloseScreen (animcur.c:106)
by 0x539831: present_close_screen (present_screen.c:64)
by 0x43E486: dix_main (main.c:351)
by 0x30D70206FF: (below main) (libc-start.c:289)
Address 0x980e1a0 is 64 bytes inside a block of size 904
at 0x4A07D6A: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x434158: RemoveDevice (devices.c:1157)
by 0x42F77B: CloseDeviceList (devices.c:1017)
by 0x430246: CloseDownDevices (devices.c:1047)
by 0x43E3EB: dix_main (main.c:333)
by 0x30D70206FF: (below main) (libc-start.c:289)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
By the time we get here we've already been through FreeAllResources,
which has already torn down the RANDR objects, so on the second
regeneration you get:
Invalid read of size 4
at 0x51C6F0: RRCrtcDestroy (rrcrtc.c:659)
by 0x4285F5: xwl_output_destroy (xwayland-output.c:191)
by 0x426464: xwl_close_screen (xwayland.c:112)
by 0x4B7F77: CursorCloseScreen (cursor.c:187)
by 0x536013: AnimCurCloseScreen (animcur.c:106)
by 0x539841: present_close_screen (present_screen.c:64)
by 0x43E496: dix_main (main.c:351)
by 0x30D70206FF: (below main) (libc-start.c:289)
Address 0x4cc6640 is 0 bytes inside a block of size 728 free'd
at 0x4A07D6A: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x51BCCF: RRCrtcDestroyResource (rrcrtc.c:689)
by 0x45CD91: doFreeResource (resource.c:872)
by 0x45DE56: FreeClientResources (resource.c:1138)
by 0x45DF06: FreeAllResources (resource.c:1153)
by 0x43E3BD: dix_main (main.c:321)
by 0x30D70206FF: (below main) (libc-start.c:289)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Jonas Ådahl
Alexandr Shadchin
Jamey Sharp
Olivier Fourdan
Rui Matos
Marek Chalupa
Dima Ryazanov
Alan Coopersmith
Jon TURNEY
Eric Anholt
Egbert Eich
Ville Syrjälä
Matt Turner
Gaetan Nadon
Adam Jackson
Ian Scott
Laércio de Sousa
Jürg Billeter
Daniel Drake
Boyan Ding
Peter Hutterer
Carlos Garnacho
Jasper St. Pierre
Ilia Mirkin
Felix Janda
Ingo Schwarze
Mario Kleiner
Dave Airlie