If we didn't go into the if (!autoconfig) { } block, the filename,
dirname, and sysdirname pointers were never initialized, but we
freed them outside the block, leading to potential memory corruption.
Move the frees inside the block where they're initialized to avoid this.
To avoid similar problems, move the declarations of the variables that
are only used in this block inside the block.
Regression introduced by commit 3d635fe84d
Found by gcc warning:
xf86Config.c: In function 'xf86HandleConfigFile':
xf86Config.c:2303:11: warning: 'filename' may be used uninitialized in this function
xf86Config.c:2303:22: warning: 'dirname' may be used uninitialized in this function
xf86Config.c:2303:32: warning: 'sysdirname' may be used uninitialized in this function
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It will never return NULL, so don't try to handle a NULL condition,
since that just confuses programmers and static analyzers.
It uses calloc, so all the allocated memory is cleared, so there's
no point looping over the memory to manually initialize it NULL.
And just because it's annoying, it doesn't need to be the only
place in this file to do if (NULL==...) instead of if (... == NULL).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Avoids the dummy-event dance if we have an event type and need to get the
matching XI2 type.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
We call xf86penConfigDirFiles twice, so we overwrite the configDirPath
variable, losing the pointer. If we move the pointer management to the
upper layer (the function callers), they will be able to call these
functions as many times as they want, but they'll have to free those
returned values.
v2: don't leak inside XWin
4,097 bytes in 1 blocks are definitely lost in loss record 625 of 632
at 0x4C2779D: malloc (in vgpreload_memcheck-amd64-linux.so)
by 0x4D7899: DoSubstitution (scan.c:615)
by 0x4D87B0: OpenConfigDir (scan.c:845)
by 0x4D8A2D: xf86openConfigDirFiles (scan.c:955)
by 0x49031F: xf86HandleConfigFile (xf86Config.c:2327)
by 0x49A9BF: InitOutput (xf86Init.c:365)
by 0x425A7A: main (main.c:204)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This batch is the straightforward set - others are more complex and
need more analysis to determine right size to pass.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Found no calls from current driver modules
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Gets rid of duplicate static copy of optionTypeToString by putting
both callers of that helper function in the same source file.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When we want to print a string, it's okay to just print it.
We don't need to first allocate a buffer 2 bytes bigger than the
string, copy the entire string unmodified to the buffer, print the
buffer, and then leak the buffer (though we AbortDDX 8 lines later,
and then just in case we survived that, call exit as well, so the
leak is short lived, just oh so pointless).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
As long as we're carrying around a compatibility copy in os/strl*.c,
might as well use them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
We don't ship either one, so don't waste time and make confusing log
entries trying to load them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Wherever it's obvious which device we need (keyboard or pointer), use
GetMaster() instead of GetPairedDevice(). It is more reliable in actually
getting the device type we want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xorg.conf devices had the name and driver set in the DDX's InputInfoPtr list
but not in the option list for those devices. That information was lost when
passing the options into NewInputDeviceRequest. NIDR then refused to start
the devices.
Introduced in xorg-server-1.11.0-250-ge4cd24e
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: James Cloos <cloos@jhcloos.com>
Add nouveau as the first driver on linux for NVIDIA hardware when
driver autoconfiguration is done, as it is more capable than nv.
nv is also kept in the list as it is more widely supported and because
some old cards are not supported by nouveau.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only use one init path for input devices - through NIDR.
This requires that inp_driver and inp_identifier from the
XF86ConfInputRec are copied over into the options for NIDR to see them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The former strdups for us. If the strdup fails we miss out on the
CorePointer option (default on anyway) and we're likely to fall over soon
anyway, so let's pretend this is the same behaviour.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use the same struct for both InputOption and XF86OptionRec so we don't need
to convert to and fro the two in the config backends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Bug introduced by 9dca441670
xfree86: add a hook to replace the new console handler.
console_handler was not being set, making the server eat up CPU spinning
in WaitForSomething selecting consoleFd over and over again, every time
trying to unregister drain_console without success due to
console_handler being NULL.
Let's just fix the unregistration in xf86SetConsoleHandler() and use that.
But wait, there could be a catch: If some driver replaced the handler using
xf86SetConsoleHandler(), the unregistration in xf86CloseConsole will unregister
that one. I don't understand Xorg well enough to know whether this poses a
problem (could mess up driver deinit somehow or something like that). As it is,
xf86SetConsoleHandler() doesn't offer any way to prevent this (i.e. check which
handler is currently registered).
I had been using it for two days on my machine that previously hit 100% CPU
several times a day. That has now gone away without any new problems appearing.
Signed-off-by: Tomas Trnka <tomastrnka@gmx.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The ABI changed in the previous series of changes, so bump the ABI version for
the next release.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Per-domain I/O is now something drivers must manually request, and must
keep track of within their own state rather than in the ScrnInfoRec.
It's not really possible to split that into two steps without an
additional intermediate ABI break, so don't even try. Drivers that want
source compatibility should ifdef on the presence of xf86UnmapLegacyIO.
As a fringe benefit, domain-aware I/O is now OS-independent, relying
only on support in pciaccess. Simplify OS PCI setup to reflect this.
The IOADDRESS type is kept around to help drivers through the API
transition and will be removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is really a vga-specific hack anyway. The only modern driver that
uses it is trident, but it's already loaded vgahw by the time it would
call xf86GetClocks.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
For Zaphod mode screen crossing handling we need to know the size of all
screens together (i.e. the whole desktop size). Store that in the screenInfo to
have it readily available in events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keeping track of which screen the pointer within the input driver is
obsolete now. To bind to a screen, use the transformation matrix instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This does not really handle hotplug (it's handled inside the kernel,
by the 'mux' devices), but uses the wscons console driver
configuration to figure out the keyboard layout and the list of
pointing devices found by the kernel.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Return errors instead of silently ignoring them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This widens almost all of the float-using code in ptrveloc.[ch] to
doubles, other than values coming from properties which are specified to
be floats by the property API.
Bumps input API to v14 as this changes the AccelScheme signature, as
used by xf86-input-synaptics.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Recent changes to the server change the default absolute input device
behaviour on zaphods to span the whole desktop too. Since these setups
usually use an xorg.conf, allow the transformation matrix to be specified in
the config as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
In all cases, the pointer was simply type-cast anyway. Let's get some
compile-time type safety going, how about that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Squashed in:
xfree86: Move definition of xf86OptionPtr into separate header file
The pile of spaghettis that is the xfree86 include dependencies make it
rather hard to have a single typedef somewhere that's not interfering with
everything else or drags in a whole bunch of other includes.
Move the xf86OptionRec and GenericListRec declarations into a separate
header.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The video driver ABI was bumped to 11.0 in commit
0de7cec907 because of a change to the
size of ATOM in commit 51f353d0a0. This
also affects extension modules, so the extension ABI version should
have been bumped too.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Stop duplicating in each os-support variant before it gets replicated
even further.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
InputOptions is not switched to use struct list for a future patch to unify
it with the XF86OptionRec.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 43d9edd31e.
This commit was introduced in the 1.2 cycle when hotplugging was less than
ideal (i.e. it didn't exist). From the commit message:
Always add a mouse driver instance configured to send core events, unless
a core pointer already exists using either the mouse or void drivers. This
handles the laptop case where the config file only specifies, say,
synaptics, which causes the touchpad to work but not the pointing stick.
We don't double-instantiate the mouse driver to avoid the mouse moving twice
as fast, and we skip this logic when the user asked for a void core pointer
since that probably means they want to run with no pointer at all.
To get this case above, a user would need to disable hotplugging _and_ have a
xorg.conf that only references one device. This is possible, but not a use-case
we should worry about too much now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Add support for multi-seat-aware input device hotplugging. This
implements the multi-seat scheme explained here:
http://www.freedesktop.org/wiki/Software/systemd/multiseat
This introduces a new X server switch "-seat" which allows configuration
of the seat to enumerate hotplugging devices on. If specified the value
of this parameter will also be exported as root window property
Xorg_Seat.
To properly support input hotplugging devices need to be tagged in udev
according to the seat they are on. Untagged devices are assumed to be on
the default seat "seat0". If no "-seat" parameter is passed only devices
on "seat0" are used. This means that the new scheme is perfectly
compatible with existing setups which have no tagged input devices.
Note that the -seat switch takes a completely generic identifier, and
that it has no effect on non-Linux systems. In fact, on other OSes a
completely different identifier scheme for seats could be used but still
be exposed with the Xorg_Seat and -seat.
I tried to follow the coding style of the surrounding code blocks if
there was any one could follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Slowly merging the vastly different code-paths.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, just readability improvements. This also gets rid of
the count variable. Count was just used for resizing the null-terminated
list. Since we're not in a time-critical path here at all we can afford to
loop the list multiple times instead of keeping an extra variable around.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
If we find the core device, move all other device pointers forward right
then and there. The break will jump out of the top loop.
They had a special on braces today, so I added some for readability (and
fixed up tab vs space indentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes.
The options we assign are the ones from the Pointer/Keyboard device so we
might as well use those readable names instead of dev[count-1]->options.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices are core pointers/keyboards by default now anyway, but let's set the
option to some value instead of just NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
It doesn't matter. All devices are core pointer devices by default now
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hotplugged devices, xf86AllocateInput does that for us but the xorg.conf
path is different. Since not all drivers reset the fd during PreInit but may
still call close(pInfo->fd) in all cases, this can terminate the logging
early.
Reproducible: add a wacom driver InputDevice section with no Option Device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86ConfigLayout.inputs contains the information from the xorg.conf
file. Passing this into xf86NewInputDevice means the device will get
cleaned up on exit and the pointers in xf86ConfigLayout.inputs are left
dangling. In the second server generation, this results in a server
crash.
Also, rename pDev to pInfo. pDev is pretty much reserved for DeviceIntPtr
types.
Reproducible: AutoAddDevices off and xorg.conf input sections, trigger
server regeneration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices that succeeded during PreInit and DEVICE_INIT but failed in
DEVICE_ON would be deleted through xf86DeleteInput but not removed from the
list of input devices (and not turned off). The result was a double free on
server shutdown.
Fix this by calling RemoveDevice if EnableDevice fails.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
mieqFini() already does the right thing, but it needs to be called by the
various DDXs and the XTest Extension.
X.Org Bug 38634 <http://bugs.freedesktop.org/show_bug.cgi?id=38634>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Acked-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This struct was unused and has been effectively removed in
commit 633b81e8ba
Refs: xorg-server-1.10.0-133-g633b81e
Remove the remainder, with an ABI bump to 13.0.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Usage example (tested on a dual-seat PC):
Section "InputClass"
Identifier "keyboard-all"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
MatchLayout "!GeForce|!Matrox"
Driver "evdev"
Option "XkbLayout" "us"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
It disables auto keyboard configuration for layouts "GeForce" and "Matrox".
Note that "" in patterns means "no Layout sections found", e.g.
MatchLayout "GeForce|"
is "in layout GeForce or without explicit layout at all".
Signed-off-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We've broken the ABI with some commit and drivers built against ABI 10
happily segfault now.
(The relevant patch is 51f353d0a0 which
changed the ATOM typedef from unsigned long to uint32_t, thanks to
Cyril Brulebois <kibi@debian.org> for figuring this out)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
As a good practice and for eventual double frees.
The reason of this patch is due the resilience of xf86XVInitAdaptors, where
for any adaptor failure it's able to keep trying registering the following
ones.
I discussed briefly with Pauli and Ville about a bigger refactoring of such
function, doing it in a way to return instantly when a failure happens; after
all that's how mostly of the other driver functions work. Instead, we just
thought that xf86XVInitAdaptors is wise and cool, and eventually other driver
functions should be even following the main idea of resilience.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When xf86XVFreeAdaptor is called more than once in xf86XVInitAdaptors (it may,
but not often), the conditional being changed in this patch will always take
true path and will keep freeing pAdaptor->pAttributes, thus letting the system
error-prone.
This patch fix such problem checking for a pointer instead the number of
attributes. Such pointer will be deallocated when xf86XVFreeAdaptor is called
first and will not let the code re-run in the following calls. This is a bit
similar how the surroundings code is already doing.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
introduced in 93ca526892.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Nicolas Peninguy <nico@lostgeeks.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
each DDX has its own copy, I've taken the darwin one,
though I'm not sure why it needs the pOldClip piece that nobody
else has and the commit msg is like an "Updates from magic land"
type message.
This removes the main uses of pWin->winSize from the DDXen.
v2: drop old clip like ajax suggests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Makes reading the log file a lot easier for those that don't magically
recognise the log spew by the individual drivers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Devices usually enable SIGIO processing in EnableDevice. CheckMotion
initialises the pointer sprite, sends Enter/Leave events, etc. This leaves
us with a small window where events may be processed without the sprite or
pointer position (as seen from the protocol) is valid.
Block signals during this window.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
configScreen used a dynamically allocated buffer for XF86ConfScreenRec
when conf_screen argument was NULL. This pointer was never stored
anywhere, nor was it released, so this patch makes the function use
automatically allocated storage in that situation.
[ajax: minor grammar fix]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Alan Coopersmith
Peter Hutterer
Paulo Zanoni
Chris Wilson
Jeremy Huddleston
Keith Packard
Anssi Hannula
Michal Suchanek
Tomáš Trnka
Tiago Vignatti
Adam Jackson
Matthieu Herrb
Alexandr Shadchin
Daniel Stone
Aaron Plattner
Jamey Sharp
Lennart Poettering
Daniel Kurtz
Simon Thum
Oleh Nykyforchyn
Dave Airlie
Christopher James Halse Rogers
Erkki Seppälä