LogMessage logs only when the XLOG_VERBOSITY is >= 1, but by default
XLOG_VERBOSITY is 0.
Signed-off-by: Mariusz Ceier <mceier+freedesktop@gmail.com>
(cherry picked from commit 95539ab37b)
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
(cherry picked from commit efb3abddd4)
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
(cherry picked from commit 293cf660c9)
One general assumption in Xwayland is that the xwl_window remains the
same for all the child windows of the toplevel window.
When mapping a new X11 window, ensure_surface_for_window() checks for an
existing xwl_window by using xwl_window_get() which will just check for
the registered xwl_window for the window.
That means that a client mapping a child window of an existing window
with a xwl_window will get another different xwl_window.
If an X11 client issues a Present request on the parent window, hence
placed underneath its child window of the same size, the Wayland
compositor may not send the frame callback event for the parent's
Wayland surface which is reckoned to be not visible, obscured behind
the other Wayland surface for the child X11 window.
That bug affects some games running in wine which may get 1 fps because
the repaint occurs only on timeout with a long interval (as with, e.g.
https://bugs.winehq.org/show_bug.cgi?id=47066)
Fix ensure_surface_for_window() by using xwl_window_from_window() which
will walk the window tree, so that a child window won't get another
xwl_window than its parent.
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1099
See-also: https://bugs.winehq.org/show_bug.cgi?id=47066
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 606ba7fc51)
When running non-rootless, Xwayland requires that the Wayland compositor
supports the wl_shell protocol.
Check for wl_shell protocol support at startup and exit cleanly if
missing rather than segfaulting later in ensure_surface_for_window()
while trying to use wl_shell_get_shell_surface().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
(cherry picked from commit ffd02d9b26)
The EGLStream backend keeps a queue of pending streams for each Xwayland
window.
However, when this pending queue is freed, the corresponding private
data may not be cleared (typically if the pixmap for this window has
changed before the compositor finished attaching the consumer for the
window's pixmap's original eglstream), leading to a use-after-free and a
crash when trying to use that data as the window pixmap.
Make sure to clear the private data when the pending stream is freed.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1055
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Karol Szuster <karolsz9898@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit a5f439dcd2)
Major/minor numbers are a.. major (ha) source of pain in FreeBSD porting.
In this case, Xwayland was thinking that /dev/dri/card0 is already a render node,
because the st_rdev on FreeBSD was passing the Linux-style check,
and because of the assumption, acceleration would fail because
various ioctls like AMDGPU_INFO would be denied on the non-render node.
Switch to libdrm's function that already works correctly on all platforms.
Signed-off-by: Greg V <greg@unrelenting.technology>
Reviewed-by: Emmanuel Vadot <manu@FreeBSD.org>
(cherry picked from commit 239ebdc9e4)
Currently, when a X11 client (usually the X11 window manager from a
Wayland compositor) changes the value of the X11 property
`_XWAYLAND_ALLOW_COMMITS` from `false` to `true`, all pending frame
callbacks on the window are discarded so that the commit occurs
immediately.
Weston uses that mechanism to prevent the content of the window from
showing before it's ready when mapping the window initially, but
discarding the pending frame callbacks has no effect on the initial
mapping of the X11 window since at that point there cannot be any frame
callback on a surface which hasn't been committed yet anyway.
However, discarding pending frame callbacks can be problematic if we
were to use the same `_XWAYLAND_ALLOW_COMMITS` mechanism to prevent
damages to be posted before the X11 toplevel is updated completely
(including the window decorations from the X11 window manager).
Remove the portion of code discarding the pending frame callback,
Xwayland should always wait for a pending frame callback if there's one
before posting new damages.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/333
(cherry picked from commit 66da95a172)
We can only flip if the window pixmap matches that of the toplevel
window. Doing so regardless could cause the toplevel window pixmap to
get destroyed while it was still referenced by the window, resulting in
use-after-free and likely a crash.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1033
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
(cherry picked from commit 4c25356d6c)
At the point where xf86BusProbe runs we haven't yet taken our own VT,
which means we can't perform drm "master" operations on the device. This
is tragic, because we need master to fish the bus id string out of the
kernel, which we can only do after drmSetInterfaceVersion, which for
some reason stores that string on the device not the file handle and
thus needs master access.
Fortunately we know the format of the busid string, and it happens to
almost be the same as the ID_PATH variable from udev. Use that instead
and stop calling drmSetInterfaceVersion.
(backported from commit 0816e8fca6)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 6a79a737e2)
This couldn't have worked correctly for non-0 x1/y1.
Noticed by inspection.
Reviewed-by: Simon Ser <contact@emersion.fr>
(cherry picked from commits 9141196d31)
(cherry picked fixup from commit 85a6fd11c7)
The way Xwayland works (like all Wayland clients), it first queries the
Wayland registry, set up all relevant protocols and then initializes its
own structures.
That means Xwayland will get the Wayland outputs from the Wayland
compositor, compute the physical size of the combined outputs and set
the corresponding Xwayland screen properties accordingly.
Then it creates the X11 screen using fbScreenInit() but does so by using
a default DPI value of 96. That value is used to set the physical size
of the X11 screen, hence overriding the value computed from the actual
physical size provided by the Wayland compositor.
As a result, the DPI computed by tools such as xdpyinfo will always be
96 regardless of the actual screen size and resolution.
However, if the Wayland outputs get reconfigured, or new outputs added,
or existing outputs removed, Xwayland will recompute and update the
physical size of the screen, leading to an unexpected change of DPI.
To avoid that discrepancy, use a fixed size DPI (defaults to 96, and can
be set using the standard command lime option "-dpi") and compute a
physical screen size to match that DPI setting.
Note that only affects legacy core protocols, X11 clients can still get
the actual physical output size as reported by the Wayland compositor
using the RandR protocol, which also allows for the size to be 0 if the
size is unknown or meaningless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/731
(cherry picked from commit b0413b6e99)
Previously, linux-dmabuf was used unconditionally if the buffer had a
modifier. However creating a linux-dmabuf buffer with a format/modifier
which hasn't been advertised will fail.
Change xwl_glamor_gbm_get_wl_buffer_for_pixmap to use linux-dmabuf when
the format/modifier has been advertised only.
Signed-off-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1035
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit c0e13cbf5a)
During a VT-Switch a raw pointer to the shared cursor object
is saved which is then freed (in case of low refcount) by a call to
xf86CursorSetCursor with argument pCurs = NullCursor.
This leads to a dangling pointer which can follow in a use after free.
This fix ensures that there is a shared handle saved for the VT-Switch cycle.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 7ae221ad57)
Mostly http->https conversions, but also replaces gitweb.fd.o
with gitlab.fd.o, and xquartz.macosforge.org with xquartz.org.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit a5151f58cf)
Xwayland is just a Wayland client, no X11 screensaver should be
expected to work reliably on Xwayland when running rootless because
Xwayland cannot grab the input devices so it has no way to actually
lock the screen managed by the Wayland compositor.
Turn off the screensaver on Xwayland when running rootless by setting
the screensaver timeout and interval and their default values to zero
and disable the MIT-SCREEN-SAVER extension.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1051
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 5c20e4b834)
In the log of the commit below, I claimed this wasn't necessary on the
1.20 branch, but this turned out to be wrong: It meant that
event->buffer could already be destroyed in xwl_present_free_event,
resulting in use-after-free and likely a crash.
Fixes: 22c0808ac8 "xwayland: Free all remaining events in
xwl_present_cleanup"
Since the introduction of "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize" the fb_id isn't initialited at
drmmode_xf86crtc_resize.
Rotate operation of XRandR uses rotate_bo. So in this case the fb_id
associated to the front_bo is not initialized at drmmode_set_mode_major.
So fd_id remains 0.
As every call to drmmode_xf86crtc_resize allocates a new front_bo we should
destroy unconditionally the old_front_bo if operation success. So we free
the allocated GBM handles.
This avoids crashing xserver with a OOM in the RPI4 1Gb at 4k resolution
after 3 series xrandr rotations from normal to left and vice versa reported at
https://github.com/raspberrypi/firmware/issues/1345
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1024
Fixes: 8774532121 "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize"
(cherry picked from commit 73480f172a)
When a slave device causes the master virtual pointer device to change
device types, the device's private data pointer
(device->public.devicePrivate) is also changed to match the type of the
slave device. This can be a problem though, as tablet pad devices will
set the device's private data pointer to their own xwl_tablet_pad
struct. This can cause us to dereference the pointer as the wrong type,
and result in a segfault:
Thread 1 "Xwayland" received signal SIGSEGV, Segmentation fault.
wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at src/wayland-client.c:792
792 va_start(ap, opcode);
(gdb) bt
0 wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at
src/wayland-client.c:792
1 0x00005610b27b6c55 in wl_pointer_set_cursor (hotspot_y=0,
hotspot_x=0, surface=0x0, serial=<optimized out>, wl_pointer=<optimized
out>) at /usr/include/wayland-client-protocol.h:4610
2 xwl_seat_set_cursor (xwl_seat=xwl_seat@entry=0x5610b46d5d10) at
xwayland-cursor.c:137
3 0x00005610b27b6ecd in xwl_set_cursor (device=<optimized out>,
screen=<optimized out>, cursor=<optimized out>, x=<optimized out>,
y=<optimized out>) at xwayland-cursor.c:249
4 0x00005610b2800b46 in miPointerUpdateSprite (pDev=0x5610b4501a30) at
mipointer.c:468
5 miPointerUpdateSprite (pDev=0x5610b4501a30) at mipointer.c:410
6 0x00005610b2800e56 in miPointerDisplayCursor (pCursor=0x5610b4b35740,
pScreen=0x5610b3d54410, pDev=0x5610b4501a30) at mipointer.c:206
7 miPointerDisplayCursor (pDev=0x5610b4501a30, pScreen=0x5610b3d54410,
pCursor=0x5610b4b35740) at mipointer.c:194
8 0x00005610b27ed62b in CursorDisplayCursor (pDev=<optimized out>,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at cursor.c:168
9 0x00005610b28773ee in AnimCurDisplayCursor (pDev=0x5610b4501a30,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at animcur.c:197
10 0x00005610b28eb4ca in ChangeToCursor (pDev=0x5610b4501a30,
cursor=0x5610b4b35740) at events.c:938
11 0x00005610b28ec99f in WindowHasNewCursor
(pWin=pWin@entry=0x5610b4b2e0c0) at events.c:3362
12 0x00005610b291102d in ChangeWindowAttributes (pWin=0x5610b4b2e0c0,
vmask=<optimized out>, vlist=vlist@entry=0x5610b4c41dcc,
client=client@entry=0x5610b4b2c900) at window.c:1561
13 0x00005610b28db8e3 in ProcChangeWindowAttributes (client=0x5610b4b2c900)
at dispatch.c:746
14 0x00005610b28e1e5b in Dispatch () at dispatch.c:497
15 0x00005610b28e5f34 in dix_main (argc=16, argv=0x7ffc7a601b68,
envp=<optimized out>) at main.c:276
16 0x00007f8828cde042 in __libc_start_main (main=0x5610b27ae930 <main>,
argc=16, argv=0x7ffc7a601b68, init=<optimized out>, fini=<optimized
out>, rtld_fini=<optimized out>, stack_end=0x7ffc7a601b58) at
../csu/libc-start.c:308
17 0x00005610b27ae96e in _start () at cursor.c:1064
Simple reproducer in gnome-shell: open up an Xwayland window, press some
tablet buttons, lock and unlock the screen. Repeat if it doesn't crash
the first time.
So, let's fix this by registering our own device-specific private key
for storing a backpointer to xwl_tablet_pad, so that all input devices
have their private data pointers set to their respective xwl_seat.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit ba0e789b91)
ProcVidModeGetGamma() relies on GetGamma() to initialise values if it
returns TRUE. Without this, we're sending uninitialised values to
clients.
Fixes: xorg/xserver#1040
(cherry picked from commit 6748a40941)
When running with a weston session without a pointer device (thus with
the wl_seat not having a pointer) xwayland pointer warping and pointer
confining should simply be ignored to avoid crashes.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
(cherry picked from commit d35f68336b)
Xwayland uses the device private to point to the `xwl_seat`.
Device may be removed at any time, including on suspend.
On resume, if the DIX code ends up calling a function that requires the
`xwl_seat` such as `xwl_set_cursor()` we may end up pointing at random
data.
Make sure the clear the device private data on removal so that we don't
try to use it and crash later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
https://gitlab.freedesktop.org/xorg/xserver/issues/709
(cherry picked from commit 4195e80356)
At the end of xwl_present_cleanup, these events aren't reachable
anymore, so if we don't free them first, they're leaked.
(cherry picked from commit 64565ea344fef0171497952ef75f019cb420fe3b)
v2:
* Simpler backport, no need to keep a reference to the pixmap on the
1.20 branch.
Minor cleanup, and will make the next change simpler. No functional
change intended.
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1beffba699)
Drop GBM_BO_USE_SCANOUT from the GBM_BO_IMPORT_FD import, add
GBM_BO_USE_RENDERING to the GBM_BO_IMPORT_FD_MODIFIER import.
If the DMA-BUF cannot be scanned out, gbm_bo_import with
GBM_BO_USE_SCANOUT will fail. However Xwayland doesn't need to scan-out
the buffer and can work fine without scanout. Glamor only needs
GBM_BO_USE_RENDERING.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 421ce458f1)
Mutter recently added headless tests, and when running those tests the
Wayland compositor runs for a very short time.
Xwayland is spawned by the Wayland compositor and upon startup will
query the various Wayland protocol supported by the compositor.
To do so, it will do a roundtrip to the Wayland server waiting for
events it expects.
If the Wayland compositor terminates before Xwayland has got the replies
it expects, it will loop indefinitely calling `wl_display_roundtrip()`
continuously.
To avoid that issue, add a new `xwl_screen_roundtrip()` that checks for
the returned value from `wl_display_roundtrip()` and fails if it is
negative.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
(cherry picked from commit 785e59060c)
The miPointerSpriteFunc swcursor code expects there to only be a single
framebuffer and when the cursor moves it will undo the damage of the
previous draw, potentially overwriting what ever is there in a new
framebuffer installed after a flip.
This leads to all kind of artifacts, so we need to disable pageflipping
when a swcursor is used.
The code for this has shamelessly been copied from the xf86-video-amdgpu
code.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/issues/828
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0aaac8d783)
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@displaylink.com>
../hw/xfree86/os-support/stub/stub_init.c: In function ‘xf86OSInputThreadInit’:
../hw/xfree86/os-support/stub/stub_init.c:29:1: warning: old-style function definition [-Wold-style-definition]
(cherry picked from commit 7c266cafed)
We were only calling xwl_present_unrealize_window for the toplevel
window, but the list can contain entries from child windows as well,
in which case we were leaving dangling pointers to freed memory.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/1000
Fixes: c5067feaee "xwayland: Use single frame callback for Present
flips and normal updates"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 5e91587302)
The compositor may send DRM_FORMAT_MOD_INVALID instead of a list of
modifiers for various reasons. Handle this gracefully by ignoring it.
Without this, if a compositor would send DRM_FORMAT_MOD_INVALID, it'd
result in empty windows provided by Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit edf964434e)
Instead of only the fallback timer.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/854
v2:
* Drop unused frame_callback member of struct xwl_present_window
(Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 9b31358c52)
Using a list of Present windows that need to be called back.
This prepares for the following change, there should be no change in
observed behaviour.
v2:
* Use xwl_window_create_frame_callback instead of making the
frame_listener struct non-static (Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit c5067feaee)
This will be used by the following changes. No functional change
intended.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit f80eea0529)
When a pixmap is created with a backing FBO, the FBO should be cleared
to avoid rendering uninitialized memory. This could happen when the
pixmap is rendered without being filled in its entirety.
One example is when a top-level window without a background is
resized. The pixmap would be reallocated to prepare for more pixels,
but uninitialized memory would be rendered in the resize offset until
the client sends a frame that fills these additional pixels.
Another example is when a new top-level window is created without a
background. Uninitialized memory would be rendered after the pixmap is
allocated and before the client sends its first frame.
This issue is only apparent in OpenGL implementations that don't zero
the VRAM of allocated buffers by default, such as RadeonSI.
Signed-off-by: Dor Askayo <dor.askayo@gmail.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/636
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 0e9a0c203c)
[ Michel Dänzer:
* Squashed in commit ebf549db2d
* Dropped code related to glamor_format, which only exists on master ]
In between the two phases introduced by the previous change. This makes
sure all pending drawing to the new buffers is flushed before they're
committed to the Wayland server.
(cherry picked from commit a542224ea2)
The first phase sets the new surface properties for all damaged
windows, then the second phase commits all surface updates.
This is preparatory for the next change, there should be no observable
change in behaviour (other than the order of Wayland protocol
requests).
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit f88d9b1f77)
The atomic driver has issues with modesetting when stealing
connectors from a different crtc, a black screen when doing rotation
on a different crtc, and in general is just a mapping of the legacy
helpers to atomic. This is already done in the kernel, so just
fallback to legacy by default until this is fixed.
Please backport to 1.20, as we don't want to enable it for everyone
there. It breaks for existing users.
The fixes to make the xserver more atomic have been pending on the
mailing list for ages.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110375
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110030
References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/36/commits
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit f0d78b47ac)
I introduced this error with the MST hotplug code, but it can trigger
on zaphod setups, and is perfectly fine. There is no support for
MST/hotplug on zaphod setups currently, so we can just skip over
the dynamic connector handling here. However we shouldn't skip
over the lease handling so move it into the codepath.
Fixes: 9257b1252d ("modesetting: add dynamic connector hotplug support (MST) (v3)")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1cfdd1a965)
Avoids a crash in xf86RotatePrepare -> DamageRegister during
CreateScreenResources if rotation or another transform is configured for
any connected RandR output in xorg.conf. The generic rotation/transform
code generally can't work without the root window currently.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/969
Fixes: 094f42cdfe "xfree86/modes: Call xf86RotateRedisplay from
xf86CrtcRotate"
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 6a5e47c57d)
For the miClearDrawable prototype. Apparently it doesn't get pulled in
for some build configurations, breaking the build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a24a786fc8)
Since the Solaris kernel tracks IOPL per thread, and doesn't inherit
raised IOPL levels when creating a new thread, we need to turn it on
in the input thread for input drivers like vmmouse that need register
access to work correctly.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 12769c516d)
Allows os backends to run additional code as necessary to set up the
input thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit ea1527a8a6)
Allows ddx's to run additional code as necessary to set up the
input thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 4ad21c3247)
Keeping track of kernel state in user space doesn't buy us anything,
and introduces bugs, as we were keeping global state but the Solaris
kernel tracks IOPL per thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 7533fa9bd5)
Calling rrGetScrPriv when RandR isn't initialized causes an assertion
failure that aborts the server:
Xorg: ../include/privates.h:121: dixGetPrivateAddr: Assertion `key->initialized' failed.
Thread 1 "Xorg" received signal SIGABRT, Aborted.
0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff7892897 in abort () from /usr/lib/libc.so.6
#2 0x00007ffff7892767 in __assert_fail_base.cold () from /usr/lib/libc.so.6
#3 0x00007ffff78a1526 in __assert_fail () from /usr/lib/libc.so.6
#4 0x00007ffff7fb57c1 in dixGetPrivateAddr (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:121
#5 0x00007ffff7fb5822 in dixGetPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:136
#6 0x00007ffff7fb586a in dixLookupPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:166
#7 0x00007ffff7fb8445 in CreateScreenResources (pScreen=0x555555ab1790) at ../hw/xfree86/drivers/modesetting/driver.c:1335
#8 0x000055555576c5e4 in xf86CrtcCreateScreenResources (screen=0x555555ab1790) at ../hw/xfree86/modes/xf86Crtc.c:744
#9 0x00005555555d8bb6 in dix_main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/main.c:214
#10 0x00005555557a4f0b in main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/stubmain.c:34
This can happen, for example, if the server is configured with Xinerama
and there is more than one X screen:
Section "ServerLayout"
Identifier "crash"
Screen 0 "modesetting"
Screen 1 "dummy" RightOf "modesetting"
Option "Xinerama"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "dummy"
Driver "dummy"
EndSection
Section "Screen"
Identifier "dummy"
Device "dummy"
EndSection
The problem does not reproduce if there is only one X screen because of
this code in xf86RandR12Init:
#ifdef PANORAMIX
/* XXX disable RandR when using Xinerama */
if (!noPanoramiXExtension) {
if (xf86NumScreens == 1)
noPanoramiXExtension = TRUE;
else
return TRUE;
}
#endif
Fix the problem by checking dixPrivateKeyRegistered(rrPrivKey) before
calling rrGetScrPriv. This is similar to what the xf86-video-amdgpu
driver does:
fd66f5c0be/src/amdgpu_kms.c (L388)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 4226c6d032)
The Present code sends the idle notification event to the client after
xwl_present_flush returns. If we don't flush our GPU work here, the
client may race to draw another frame to the same buffer, so we may end
up copying (parts of) that new frame instead of the one we meant to.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/835
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(Cherry picked from commit 2a2234ad1a)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes random garbage being visible intermittently.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit 9ba13bac9d)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If a new rotate buffer was allocated. This makes sure the new buffer
has valid transformed contents when it starts being displayed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit 327df450ff)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes sure any pending drawing to a new scanout buffer will be
visible from the start.
This makes the finish call in drmmode_copy_fb superfluous, so remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit c66c548eab)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We now ask Glamor to use EGL_MESA_query_driver to obtain the DRI driver
name; if successful, we use that as the DRI driver name. Following the
existing dri2.c logic, we also use the same name for the VDPAU driver,
except for i965 (and now iris), where we switch to the "va_gl" fallback.
This allows us to bypass the PCI ID lists in xserver and centralize the
driver selection mechanism inside Mesa. The hope is that we no longer
have to update these lists for any future hardware.
(backported from commit 8d4be7f6c4)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
isastream() was never more than a stub in glibc, and was removed in
glibc-2.30 by commit a0a0dc83173c ("Remove obsolete, never-implemented
XSI STREAMS declarations").
Bug: https://bugs.gentoo.org/700838
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit e6ab7f9f34)
Slightly simplifies the callers since they don't need to check for
non-NULL anymore.
I do extremely hate the workarounds here to suppress misprite taking the
cursor down though. Surely there's a better way.
[1.20: Do not in fact simplify the callers as above, since it would
change the ABI. - ajax]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit ff310903f3)
<sys/io.h> on ARM hasn't worked for a long, long time, so it was removed
it from glibc upstream.
Remove the include to avoid a compilation failure on ARM with glibc.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/840
(cherry picked from commit fe4cd0e7f5)
During startup, the xfree86 DDX's InitOutput() calls PreInit for
protocol screens first, and then GPU screens. On teardown, dix_main()
calls CloseScreen in the reverse order: GPU screens first starting with
the last one and then working backwards, and then protocol screens also
in reverse order.
InitOutput() calls ScreenInit in the wrong order: for GPU screens first and then
for protocol screens. This causes a problem for drivers that have global state
that is tied to the first screen that calls ScreenInit.
Fix this by simply re-ordering the for loops to call PreInit for
protocol screens first and then for GPU screens second.
(cherry picked from commit e5e9a8ca91)
ms_present_get_crtc() returns an RRCrtcPtr, but derives it from a xf86CrtcPtr
found via ms_dri2_crtc_covering_drawable()=>ms_covering_crtc(). As a result, it
depends on all associated DIX ScreenRecs having an xf86CrtcConfigPtr DDX
private.
Some DIX ScreenRecs don't have an xf86CrtcConfigPtr DDX private, but do have an
rrScrPrivPtr DDX private. Given that we can derive all of the information we
need from RandR, we can support these screens by avoiding the use of xf86Crtc.
This change implements an RandR-based path for ms_present_get_crtc(), allowing
drawables to successfully fall back to syncing to the primary output, even if
the slave doesn't have an xf86CrtcConfigPtr DDX private.
Without this change, if a slave doesn't have an xf86CrtcConfigPtr DDX private,
drawables will fall back to 1 FPS if they overlap an output on that slave.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 562c7888be)
DIX ScreenRecs don't necessarily have an xf86CrtcConfigPtr DDX private.
ms_covering_crtc() assumes that they do, which can result in a segfault.
Update ms_covering_crtc() to check the XF86_CRTC_CONFIG_PTR() returned pointer
before dereferencing it. This will still mean that ms_covering_crtc() can't fall
back to the primary output when a drawable overlaps a slave output (going to the
1 FPS default instead), but it won't segfault.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 797e7a0ceb)
ms_covering_crtc() uses RRFirstOutput() to determine a primary output to fall
back to if a drawable is overlapping a slave output.
If the primary output is a slave output, RRFirstOutput() will return a slave
output even if passed a master ScreenPtr. ms_covering_crtc() dereferences the
output's devPrivate, which is invalid for non-modesetting outputs, and can
crash.
Changing RRFirstOutput() could have unintended side effects for other callers,
so this change replaces the call to RRFirstOutput() with ms_first_output().
ms_first_output() ignores the primary output if it doesn't match the given
ScreenPtr, choosing the first connected output instead.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 3ef9029ace)
Define EGL_NO_X11 everywhere were we also define MESA_EGL_NO_X11_HEADERS,
EGL_NO_X11 is the MESA_EGL_NO_X11_HEADERS equivalent for the egl headers
shipped with libglvnd.
This fixes the xserver not building with the libglvnd-1.2.0 headers:
In file included from /usr/include/EGL/eglplatform.h:128,
from /usr/include/epoxy/egl_generated.h:11,
from /usr/include/epoxy/egl.h:46,
from glamor_priv.h:43,
from glamor_composite_glyphs.c:25:
/usr/include/X11/Xlib.h:222:2: error: conflicting types for 'GC'
222 | *GC;
| ^~
In file included from glamor.h:34,
from glamor_priv.h:32,
from glamor_composite_glyphs.c:25:
../include/gcstruct.h:282:3: note: previous declaration of 'GC' was here
282 | } GC;
| ^~
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 741bd73429)
The autoconf build for the modesetting driver still relied on
xorg-macros.m4 for string replacements and did not include the
top-level manpages.am. As a result, no substitutions took place after
commit 2e497bf887.
This should be a candidate for the 1.20 branch.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit de0d39f825)
This fixes 'non-desktop' displays staying powered on after their lease
has been revoked.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111620
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
If Xwayland gets to realize a window meant for composition before the
compositor redirected windows (i.e. redirect mode is not RedirectDrawManual
yet), the window would stay "invisible" as we wouldn't create a
wl_surface/wl_shell_surface for it at any later point.
This scenario may happen if the wayland compositor sets up a X11 socket
upfront, but waits to raise Xwayland until there are X11 clients. In this
case the first data on the socket is the client's, the compositor can hardly
beat that in order to redirect subwindows before the client realizes a
Window.
In order to jump across this hurdle, allow the late creation of a matching
(shell) surface for the WindowPtr on SetWindowPixmapProc, so it is ensured
to be created after the compositor set up redirection.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 78cc8b6f96)
This is just called from xwl_window_realize() ATM, but will be useful in
future commits.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
(cherry picked from commit c2e8ae9640)
This will be dissociated in future commits to handle the cases
where windows are being realized before there is a compositor
handling redirection.
In that case, we still want the DamagePtr to be registered upfront
on RealizeWindowProc before a corresponding xwl_window might be
created. Most notably, it cannot be lazily created on
SetWindowPixmapProc as damage accounting gets broken.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
(cherry picked from commit 4e50440ae2)
Both `gbm_bo_create()` and `gbm_bo_create_with_modifiers()` can fail and
return `NULL`.
If that occurs, `xwl_glamor_gbm_create_pixmap()` will not create a
pixmap for the (NULL) GBM bo, but would still try to free the bo which
leads to a crash in mesa:
[...]
#7 <signal handler called>
#8 in gbm_bo_destroy (bo=0x0) at ../src/gbm/main/gbm.c:439
#9 in xwl_glamor_gbm_create_pixmap () at xwayland-glamor-gbm.c:245
#10 in ProcCreatePixmap () at dispatch.c:1440
#11 in Dispatch () at dispatch.c:478
#12 in dix_main () at main.c:276
To avoid the crash, only free the GBM bo if not `NULL`.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1729925
(cherry picked from commit d9ec525059)
There's not really a good way to query this from the wayland server, so
just set the maximum to the X11 protocol limits. While we're at it,
lower the minimum screen size to something implausibly small too, just
in case.
Fixes: xorg/xserver#850
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit d0850241c6)
Running Xwayland non-rootless and resizing the output would lead to a
crash while trying to update the larger areas of the root window.
Make sure we resize the backing pixmap according to the new output size
to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/834
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit ce9455b5ee)
Copied from Mesa with no modifications.
This update brings in a significant number of new platform ID's.
Syncs with mesa up to commit e334a595e ("intel/icl: Add new ICL
PCI-IDs").
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a8d9ebeb43)
Hiding the tablet tool cursor results in it being hidden forever after.
This is due to the stale frame callback that will neither be disposed
or replaced. This can be reproduced in krita (X11) as the pointer
cursor is hidden while over the canvas.
Clearing the frame callback ensures the correct behavior in future
xwl_tablet_tool_set_cursor() calls (i.e. a new cursor surface being
displayed, and a new frame callback created), and is 1:1
with xwl_seat_set_cursor() for pointers.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
(cherry picked from commit dea4a74621)
The current code in `xwl_glamor_gbm_create_pixmap_for_bo()` may fail in
several cases that are not checked for:
- `eglCreateImageKHR()` may have failed to create the image,
- `glEGLImageTargetTexture2DOES()` may fail and set an error,
- `glamor_set_pixmap_texture()` may fail for very large pixmaps
because the corresponding FBO could not be created.
Trying to upload content to a pixmap with no texture will crash Mesa,
glamor and Xwayland, e.g.:
XXX fail to create fbo.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x29)
(EE) 1: libpthread.so.0 (funlockfile+0x50)
(EE) 2: libc.so.6 (__memmove_avx_unaligned_erms+0x215)
(EE) 3: dri/i965_dri.so (_mesa_format_convert+0xab3)
(EE) 4: dri/i965_dri.so (_mesa_texstore+0x205)
(EE) 5: dri/i965_dri.so (store_texsubimage+0x28c)
(EE) 6: dri/i965_dri.so (intel_upload_tex+0x13b)
(EE) 7: dri/i965_dri.so (texture_sub_image+0x134)
(EE) 8: dri/i965_dri.so (texsubimage_err+0x150)
(EE) 9: dri/i965_dri.so (_mesa_TexSubImage2D+0x48)
(EE) 10: Xwayland (glamor_upload_boxes+0x246)
(EE) 11: Xwayland (glamor_copy+0x4d1)
(EE) 12: Xwayland (miCopyRegion+0x96)
(EE) 13: Xwayland (miDoCopy+0x43c)
(EE) 14: Xwayland (glamor_copy_area+0x24)
(EE) 15: Xwayland (damageCopyArea+0xba)
(EE) 16: Xwayland (compCopyWindow+0x31c)
(EE) 17: Xwayland (damageCopyWindow+0xd3)
(EE) 18: Xwayland (miResizeWindow+0x7b7)
(EE) 19: Xwayland (compResizeWindow+0x3a)
(EE) 20: Xwayland (ConfigureWindow+0xa96)
(EE) 21: Xwayland (ProcConfigureWindow+0x7d)
(EE) 22: Xwayland (Dispatch+0x320)
(EE) 23: Xwayland (dix_main+0x366)
(EE) 24: libc.so.6 (__libc_start_main+0xf3)
(EE) 25: Xwayland (_start+0x2e)
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Check for the possible cases of failure above and fallback to the
regular glamor pixmap creation when an error is detected.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/661
(cherry picked from commit fc6380a11b)
On pointer enter notification, Xwayland checks for an existing pointer
warp with a `NULL` sprite.
In turn, `xwl_pointer_warp_emulator_maybe_lock()` checks for an existing
grab and the destination window using `XYToWindow()` which does not
check for the actual sprite not being `NULL`.
So, in some cases, when the pointer enters the surface and there is an
existing X11 grab which is not an ownerEvents grab, Xwayland would crash
trying to dereference the `NULL` sprite pointer:
#0 __GI_raise ()
#1 __GI_abort () at abort.c:79
#2 OsAbort () at utils.c:1351
#3 AbortServer () at log.c:879
#4 FatalError () at log.c:1017
#5 OsSigHandler () at osinit.c:156
#6 OsSigHandler () at osinit.c:110
#7 <signal handler called>
#8 XYToWindow (pSprite=0x0, x=0, y=0) at events.c:2880
#9 xwl_pointer_warp_emulator_maybe_lock () at xwayland-input.c:2673
#10 pointer_handle_enter () at xwayland-input.c:434
Avoid the crash by simply checking for the sprite being not `NULL` in
`xwl_pointer_warp_emulator_maybe_lock()`
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.redhat.com/1708119
(cherry picked from commit 0a07446318)
wl_drm's protocol "device" event provides the path to the DRM device,
which may not be a render node, thus causing Xwayland to fall back to
DRM authentication which may fail if the user has switched to another
VT while Xwayland is starting.
Search for a render node corresponding to the given DRM device and try
to use it instead, as render nodes do not need DRM authentication and
Xwayland can make use of them if it can find one.
Closes: https://bugs.freedesktop.org/108038
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
(Cherry picked from commit 361894497c)
xwl_present_cleanup frees the struct xwl_present_window memory,
so if there's a pending callback, we have to destroy it to prevent
use-after-free in xwl_present_sync_callback.
Should fix issue #645.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(Cherry picked from commit 2e18eec6f0)
A user of Adélie Linux reported that modesetting wasn't working properly on
their Intel i7-9700K-integrated UHD 630 GPU. Xorg.0.log showed:
[ 131.902] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x8086 / 0x3e98
[ 131.902] (EE) modeset(0): Failed to initialize the DRI2 extension.
Indeed, that PCI ID is missing from i965_pci_ids. Adding it fixed the issue
and allowed the system to work with i965_dri under modesetting.
(cherry picked from commit d3a26bbf61)
If the driver calls xf86HandleColormaps, CMapChangeGamma updates the HW
gamma LUT of all CRTCs via xf86RandR12LoadPalette. However,
xf86RandR12ChangeGamma was then clobbering the gamma LUT of the RandR
1.2 compatibility output's CRTC with the gamma curves computed from the
screen's global gamma values.
Fix this by bailing if xf86RandR12LoadPalette is installed.
Fixes: 02ff0a5d7e "xf86RandR12: Fix XF86VidModeSetGamma triggering a
BadImplementation error"
(cherry picked from commit 30044b2253)
Noticed when porting this logic to xf86-video-nouveau, and valgrind
complained about conditional jump based on uninitialized data.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
(cherry picked from commit 48b1af2718)
Believe it or not, somehow we've never done this in legacy mode! We
currently simply change the DPMS property on the CRTC's output's
respective DRM connector, but this means that we're just setting the
CRTC as inactive-not disabled. From the perspective of the kernel, this
means that any shared resources used by the CRTC are still in use.
This can cause problems for drivers that are not yet fully atomic,
despite using the atomic helpers internally. For instance: if CRTC-1 and
CRTC-2 are still enabled and use shared resources within the kernel (an
MST topology, for example), and then userspace tries to go enable CRTC-3
on the same topology this might suddenly fail if CRTC-3 needs the shared
resources CRTC-1 and CRTC-2 are using. While I don't know of any
situations in the mainline kernel that actually trigger this, future
plans for reworking the atomic check of MST drivers are absolutely
going to make this into a real issue (they already are in my WIP
branches for the kernel).
So: actually do the right thing here and disable CRTCs when they're not
going to be used anymore, even in legacy mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 7a44e8d400)
Xwayland creates and destroys the CRTC along with the Wayland outputs,
so there is possibly a case where the number of CRTC drops to 0.
However, `xwl_present_get_crtc()` always return `crtcs[0]` which is
invalid when `numCrtcs` is 0.
That leads to crash if a client queries the Present capabilities when
there is no CRTC, the backtrace looks like:
#0 raise() from libc.so
#1 abort() from libc.so
#2 OsAbort() at utils.c:1350
#3 AbortServer() at log.c:879
#4 FatalError() at log.c:1017
#5 OsSigHandler() at osinit.c:156
#6 OsSigHandler() at osinit.c:110
#7 <signal handler called>
#8 main_arena() from libc.so
#9 proc_present_query_capabilities() at present_request.c:236
#10 Dispatch() at dispatch.c:478
#11 dix_main() at main.c:276
To avoid returning an invalid pointer (`crtcs[0]`) in that case, simply
check for `numCrtcs` being 0 and return `NULL` in that case.
Thanks to Michel Dänzer <michel.daenzer@amd.com> for pointing this as a
possible cause of the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1609181
(cherry picked from commit e8295c5020)
The buffer release queue has two kinds of entries:
* Pending async flips.
* Completed flips waiting for their buffer to be released by the Wayland
compositor.
xwl_present_timer_callback neither completes async flips nor releases
buffers, so the timer isn't needed for the buffer release queue.
(cherry picked from commit e6cd1c9bde)
Fixes issue #12. Presumably the problem was that Present operations on
unmapped windows were executed immediately instead of only when reaching
the target MSC.
(cherry picked from commit f541615342)
When a window is unrealized, a pending frame callback may never be
called, which could result in repeatedly freezing until the frame timer
fires after a second.
Fixes these symptoms when switching from fullscreen to windowed mode in
sauerbraten.
(cherry picked from commit 8c9538573c)
There's no need to keep track of the window which last performed a
Present flip. This fixes crashes due to the assertion in
xwl_present_flips_stop failing. Fixes issue #10.
The damage generated by a flip only needs to be ignored once, then
xwl_window::present_flipped can be cleared. This may fix freezing in
the (hypothetical) scenario where Present flips are performed on a
window, followed by other drawing requests using the window as the
destination, but nothing triggering xwl_present_flips_stop. The damage
from the latter drawing requests would continue being ignored.
(cherry picked from commit 6b016d58d2)
Completing them from xwl_present_sync_callback had at least two issues:
* It was before the MSC was incremented in xwl_present_frame_callback,
so the MSC value in the completion event could be lower than the
target specified by the client. This could cause hangs with the Mesa
Vulkan drivers.
* It allowed clients to run at a frame-rate higher than the Wayland
compositor's frame-rate, wasting energy on generating frames which
were never displayed. This isn't expected to happen unless the client
specified PresentOptionAsync (in which case flips are still completed
from xwl_present_sync_callback, allowing higher frame-rates).
v2:
* Make xwl_present_has_events return true when there's a pending
"synchronous" flip, so those complete after at most ~1 second even if
the Wayland server doesn't send a frame event.
Bugzilla: https://bugs.freedesktop.org/106713
(cherry picked from commit ace551d8a2)
Apart from simplifying the code, this should also prevent a condition
(which might only be possible with the following fix) reported in
https://gitlab.freedesktop.org/wayland/weston/issues/115#note_52467:
1. xwl_present_timer_callback indirectly calls xwl_present_reset_timer
-> xwl_present_free_timer
2. xwl_present_timer_callback then returns a non-0 value, so DoTimer
calls TimerSet with the old xwl_present_window->frame_timer pointer
which was freed in step 1 => use after free
Calling xwl_present_reset_timer explicitly passes NULL to TimerSet if
step 1 freed xwl_present_window->frame_timer, and it will allocate a new
one.
(cherry picked from commit 5e8b9a3a56)
The function `xwl_glamor_gbm_create_pixmap()` first creates a buffer
objects and then creates the xwl_pixmap from it.
However, `xwl_glamor_gbm_create_pixmap_for_bo()` is not called if the
buffer object creation fails, and `xwl_glamor_gbm_create_pixmap()`
simply returns `glamor_create_pixmap()`.
The problem with this is that if `xwl_glamor_gbm_create_pixmap_for_bo()`
is not called then neither is `xwl_pixmap_set_private()` and further
calls to `xwl_pixmap_get()` will return NULL and cause a NULL pointer
dereference if the return value is not checked:
#0 xwl_glamor_gbm_get_wl_buffer_for_pixmap ()
at hw/xwayland/xwayland-glamor-gbm.c:248
#1 xwl_window_post_damage () at hw/xwayland/xwayland.c:697
#2 xwl_display_post_damage () at hw/xwayland/xwayland.c:759
#3 block_handler () at hw/xwayland/xwayland.c:890
#4 BlockHandler () at dix/dixutils.c:388
#5 WaitForSomething () at os/WaitFor.c:201
#6 Dispatch () at dix/dispatch.c:421
#7 dix_main () at dix/main.c:276
#8 __libc_start_main () at ../csu/libc-start.c:308
#9 _start ()
(gdb) print xwl_pixmap
$1 = (struct xwl_pixmap *) 0x0
Make sure we check for `xwl_pixmap_get()` returned value where relevant
and fail gracefully if this is the case.
See also: https://gitlab.gnome.org/GNOME/mutter/issues/340
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marco Trevisan <mail@3v1n0.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 036794bebc)
xwl_present_window->sync_callback was leaked.
The event memory was leaked if the corresponding buffer had already been
released.
(cherry picked from commit cb0de153bf)
Jeremy Huddleston Sequoia
Jim DeLaHunt
Christopher Chavez
Jon Turney
Mariusz Ceier
Kishore Kadiyala
Martin Peres
Olivier Fourdan
Greg V
Michel Dänzer
Adam Jackson
Aaron Ma
Simon Ser
Martin Weber
Alan Coopersmith
Jose Maria Casanova Crespo
Lyude Paul
SimonP
Sjoerd Simons
Hans de Goede
Jonas Ådahl
David Seifert
Dor Askayo
Maarten Lankhorst
Dave Airlie
Aaron Plattner
Kenneth Graunke
Matt Turner
Alex Goins
Sven Joachim
Andres Rodriguez
Carlos Garnacho
Matt Roper
Peter Hutterer
Michel Dänzer
A. Wilcox
Maya Rashish
Ilia Mirkin