A user of Adélie Linux reported that modesetting wasn't working properly on
their Intel i7-9700K-integrated UHD 630 GPU. Xorg.0.log showed:
[ 131.902] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x8086 / 0x3e98
[ 131.902] (EE) modeset(0): Failed to initialize the DRI2 extension.
Indeed, that PCI ID is missing from i965_pci_ids. Adding it fixed the issue
and allowed the system to work with i965_dri under modesetting.
All of the null checks here are redundant, you can't get to those paths
unless RANDR's already been initialized. Delete them, and remove the
pointer too.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
If the driver calls xf86HandleColormaps, CMapChangeGamma updates the HW
gamma LUT of all CRTCs via xf86RandR12LoadPalette. However,
xf86RandR12ChangeGamma was then clobbering the gamma LUT of the RandR
1.2 compatibility output's CRTC with the gamma curves computed from the
screen's global gamma values.
Fix this by bailing if xf86RandR12LoadPalette is installed.
Fixes: 02ff0a5d7e "xf86RandR12: Fix XF86VidModeSetGamma triggering a
BadImplementation error"
Xwayland creates and destroys the CRTC along with the Wayland outputs,
so there is possibly a case where the number of CRTC drops to 0.
However, `xwl_present_get_crtc()` always return `crtcs[0]` which is
invalid when `numCrtcs` is 0.
That leads to crash if a client queries the Present capabilities when
there is no CRTC, the backtrace looks like:
#0 raise() from libc.so
#1 abort() from libc.so
#2 OsAbort() at utils.c:1350
#3 AbortServer() at log.c:879
#4 FatalError() at log.c:1017
#5 OsSigHandler() at osinit.c:156
#6 OsSigHandler() at osinit.c:110
#7 <signal handler called>
#8 main_arena() from libc.so
#9 proc_present_query_capabilities() at present_request.c:236
#10 Dispatch() at dispatch.c:478
#11 dix_main() at main.c:276
To avoid returning an invalid pointer (`crtcs[0]`) in that case, simply
check for `numCrtcs` being 0 and return `NULL` in that case.
Thanks to Michel Dänzer <michel.daenzer@amd.com> for pointing this as a
possible cause of the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1609181
Since 08843efc KWin was not able to start a Wayland session. Independently
of listen_fd_count add_client_fd must be called. Same holds for the
wm_selection_callback. Therefore just remove the condition.
Bugzilla: https://bugs.freedesktop.org/109220
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Noticed when porting this logic to xf86-video-nouveau, and valgrind
complained about conditional jump based on uninitialized data.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Gitlab very kindly exposes the details of the git commit message (among
much else) in the environment. Unfortunately, piglit tries to handle the
environment in non-UTF8-safe ways, which means if the top-of-tree commit
mentions non-ASCII characters (say, in the author's name) then all the
tests fail and so does the pipeline.
Fortunately none of those variables are things our piglit invocation
needs. Since I've failed to rebuild the docker image as yet, just clear
the likely variables from the environment before running piglit.
This-makes-me: ☹
Believe it or not, somehow we've never done this in legacy mode! We
currently simply change the DPMS property on the CRTC's output's
respective DRM connector, but this means that we're just setting the
CRTC as inactive-not disabled. From the perspective of the kernel, this
means that any shared resources used by the CRTC are still in use.
This can cause problems for drivers that are not yet fully atomic,
despite using the atomic helpers internally. For instance: if CRTC-1 and
CRTC-2 are still enabled and use shared resources within the kernel (an
MST topology, for example), and then userspace tries to go enable CRTC-3
on the same topology this might suddenly fail if CRTC-3 needs the shared
resources CRTC-1 and CRTC-2 are using. While I don't know of any
situations in the mainline kernel that actually trigger this, future
plans for reworking the atomic check of MST drivers are absolutely
going to make this into a real issue (they already are in my WIP
branches for the kernel).
So: actually do the right thing here and disable CRTCs when they're not
going to be used anymore, even in legacy mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
The buffer release queue has two kinds of entries:
* Pending async flips.
* Completed flips waiting for their buffer to be released by the Wayland
compositor.
xwl_present_timer_callback neither completes async flips nor releases
buffers, so the timer isn't needed for the buffer release queue.
Fixes issue #12. Presumably the problem was that Present operations on
unmapped windows were executed immediately instead of only when reaching
the target MSC.
When a window is unrealized, a pending frame callback may never be
called, which could result in repeatedly freezing until the frame timer
fires after a second.
Fixes these symptoms when switching from fullscreen to windowed mode in
sauerbraten.
There's no need to keep track of the window which last performed a
Present flip. This fixes crashes due to the assertion in
xwl_present_flips_stop failing. Fixes issue #10.
The damage generated by a flip only needs to be ignored once, then
xwl_window::present_flipped can be cleared. This may fix freezing in
the (hypothetical) scenario where Present flips are performed on a
window, followed by other drawing requests using the window as the
destination, but nothing triggering xwl_present_flips_stop. The damage
from the latter drawing requests would continue being ignored.
There are logically server state not screen state. Not that multiple
screens works, at the moment, but that's no excuse to be sloppy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
They were defined as empty macros on all platforms except for the
long unsupported Cray systems which needed to use bitfields to define
types smaller than 64-bits.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Some Broadcom set-top-box boards have PCI busses, but the GPU is still
probed through DT. We would dereference a null busid here in that
case.
Signed-off-by: Eric Anholt <eric@anholt.net>
Completing them from xwl_present_sync_callback had at least two issues:
* It was before the MSC was incremented in xwl_present_frame_callback,
so the MSC value in the completion event could be lower than the
target specified by the client. This could cause hangs with the Mesa
Vulkan drivers.
* It allowed clients to run at a frame-rate higher than the Wayland
compositor's frame-rate, wasting energy on generating frames which
were never displayed. This isn't expected to happen unless the client
specified PresentOptionAsync (in which case flips are still completed
from xwl_present_sync_callback, allowing higher frame-rates).
v2:
* Make xwl_present_has_events return true when there's a pending
"synchronous" flip, so those complete after at most ~1 second even if
the Wayland server doesn't send a frame event.
Bugzilla: https://bugs.freedesktop.org/106713
Apart from simplifying the code, this should also prevent a condition
(which might only be possible with the following fix) reported in
https://gitlab.freedesktop.org/wayland/weston/issues/115#note_52467:
1. xwl_present_timer_callback indirectly calls xwl_present_reset_timer
-> xwl_present_free_timer
2. xwl_present_timer_callback then returns a non-0 value, so DoTimer
calls TimerSet with the old xwl_present_window->frame_timer pointer
which was freed in step 1 => use after free
Calling xwl_present_reset_timer explicitly passes NULL to TimerSet if
step 1 freed xwl_present_window->frame_timer, and it will allocate a new
one.
The function `xwl_glamor_gbm_create_pixmap()` first creates a buffer
objects and then creates the xwl_pixmap from it.
However, `xwl_glamor_gbm_create_pixmap_for_bo()` is not called if the
buffer object creation fails, and `xwl_glamor_gbm_create_pixmap()`
simply returns `glamor_create_pixmap()`.
The problem with this is that if `xwl_glamor_gbm_create_pixmap_for_bo()`
is not called then neither is `xwl_pixmap_set_private()` and further
calls to `xwl_pixmap_get()` will return NULL and cause a NULL pointer
dereference if the return value is not checked:
#0 xwl_glamor_gbm_get_wl_buffer_for_pixmap ()
at hw/xwayland/xwayland-glamor-gbm.c:248
#1 xwl_window_post_damage () at hw/xwayland/xwayland.c:697
#2 xwl_display_post_damage () at hw/xwayland/xwayland.c:759
#3 block_handler () at hw/xwayland/xwayland.c:890
#4 BlockHandler () at dix/dixutils.c:388
#5 WaitForSomething () at os/WaitFor.c:201
#6 Dispatch () at dix/dispatch.c:421
#7 dix_main () at dix/main.c:276
#8 __libc_start_main () at ../csu/libc-start.c:308
#9 _start ()
(gdb) print xwl_pixmap
$1 = (struct xwl_pixmap *) 0x0
Make sure we check for `xwl_pixmap_get()` returned value where relevant
and fail gracefully if this is the case.
See also: https://gitlab.gnome.org/GNOME/mutter/issues/340
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marco Trevisan <mail@3v1n0.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Lifted from vfb. xfree86 had almost the same thing but unparameterized,
port it to the vfb style.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Could cause privilege elevation and/or arbitrary files overwrite, when
the X server is running with elevated privileges (ie when Xorg is
installed with the setuid bit set and started by a non-root user).
CVE-2018-14665
Issue reported by Narendra Shinde and Red Hat.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
`xwl_present_timer_callback()` is initially marked a private and later
implemented as public.
Let's keep that private, shall we.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
At the point where xf86BusProbe runs we haven't yet taken our own VT,
which means we can't perform drm "master" operations on the device. This
is tragic, because we need master to fish the bus id string out of the
kernel, which we can only do after drmSetInterfaceVersion, which for
some reason stores that string on the device not the file handle and
thus needs master access.
Fortunately we know the format of the busid string, and it happens to
almost be the same as the ID_PATH variable from udev. Use that instead
and stop calling drmSetInterfaceVersion.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the X server is terminated while its VT is not active, it should
not change the current VT.
v2: Query current state in xf86CloseConsole using VT_GETSTATE instead of
keeping track in xf86VTEnter/xf86VTLeave/etc.
0a9415cf apparently can tickle bugs in the GL stack where glGetString
returns NULL, presumably because the eglMakeCurrent() didn't manage to
actually install a dispatch table and you're hitting a stub function.
That's clearly not our bug, but if it happens we should at least not
crash. Notice this case and fail gently.
Signed-off-by: Adam Jackson <ajax@redhat.com>
wl_drm's protocol "device" event provides the path to the DRM device,
which may not be a render node, thus causing Xwayland to fall back to
DRM authentication which may fail if the user has switched to another
VT while Xwayland is starting.
Search for a render node corresponding to the given DRM device and try
to use it instead, as render nodes do not need DRM authentication and
Xwayland can make use of them if it can find one.
Closes: https://bugs.freedesktop.org/108038
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mesa started supporting GL_OES_EGL_image on llvmpipe in 17.3, after this
commit:
commit bbdeddd5fd0b797e1e281f058338b3da4d98029d
Author: Gurchetan Singh <gurchetansingh@chromium.org>
Date: Tue Aug 1 14:49:33 2017 -0700
st/dri: add drisw image extension
That's pretty cool, but it means glamor now thinks it can initialize on
llvmpipe. This is almost certainly not what anyone wants, as glamor on
llvmpipe is pretty much uniformly slower than fb.
This fixes both Xorg and Xwayland to refuse glamor in such a setup.
Xephyr is left alone, both because glamor is not the default there and
because Xephyr+glamor+llvmpipe is one of the easier ways to get xts to
exercise glamor.
The (very small) downside of this change is that you lose DRI3 support.
This wouldn't have helped you very much (since an lp glamor blit is
slower than a pixman blit), but it would eliminate the PutImage overhead
for llvmpipe's glXSwapBuffers. A future change should add DRI3 support
for the fb-only case.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No supported driver supports 1bpp anymore, nor has in a very long time.
This option only worked with vgahw anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
v2:
Fix a bogus warning about a missing pixelformat attribute issued for every
pixelformat when WGL_ARB_framebuffer_sRGB isn't available
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Future work: To properly support GLX_ARB_create_context in indirect mode, we
need to use wglCreateContextAttribsARB() rather than wglCreateContext(),
when attribs are provided, rather than just dropping attribs on the floor,
as we currently do.
That probably entails removing the deferred context creation and instead
using a temporary window, as direct WGL does.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
In glxWinSetPixelFormat() handle the case where wglChoosePixelFormatARB()
fails and fallback to ChoosePixelFormat()
It seems for some drivers, wglChoosePixelFormatARB() can fail when the
provided DC doesn't belong to the driver (e.g. it's a compatible DC for a
bitmap, so allow a fallback to ChoosePixelFormat() if it fails.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Exposing these pixelFormats is problematic: they are provided by the 'GDI
Generic' renderer, which doesn't support the same set of extensions as the
IGD providing the more capable pixelFormats.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
I don't think this is useful information to have in the log, and it's
a bunch of autotools and meson logic to produce it.
Signed-off-by: Eric Anholt <eric@anholt.net>
60ec8ead broke the autotools build:
sdksyms.o:(.data+0x58): undefined reference to `InitConnectionLimits'
sdksyms.o:(.data+0x2ec8): undefined reference to `xf86ServerName'
collect2: error: ld returned 1 exit status
Makefile:811: recipe for target 'Xorg' failed
Likewise 3a4d7c79 for InitConnectionLimits.
Signed-off-by: Adam Jackson <ajax@redhat.com>
If it's really this important we should just do it and not complain. We
never do it so it must not matter.
Signed-off-by: Adam Jackson <ajax@redhat.com>
I'm sure printing the address of function pointers in modules you'd
loaded might have made sense back when we rolled our own dlopen, but we
got better.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The old code would not in fact validate the option value, though it
might complain about it in the log. It also didn't let you set some
legal values that the -maxclients command line option would.
Signed-off-by: Adam Jackson <ajax@redhat.com>
DGAShutdown() walks every screen and attempts to reset the mode. That's
maybe a reasonable thing to do, although the explicit loop is certainly
a bad smell.
In ddxGiveUp it's called after we've torn down the vga arbiter - and in
fact most of the rest of screen state - which is... very very bad. The
other place it's called is from the Control-Alt-BackSpace handler, where
we don't even attempt to do vga arb setup, and where in any case we're
going to escape the main loop eventually anyway.
Move all that cleanup work inside DGACloseScreen. This means it happens
earlier in server teardown than previously, but not in a way you're ever
going to be upset about.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Xwayland's `xwl_destroy_window()` invokes `xwl_present_cleanup()`
before the common `DestroyWindow()`.
But then `DestroyWindow()` calls `present_destroy_window()` which will
possibly end up in `xwl_present_abort_vblank()` which will try to access
data that was previously freed by `xwl_present_cleanup()`:
Invalid read of size 8
at 0x434184: xwl_present_abort_vblank (xwayland-present.c:378)
by 0x53785B: present_wnmd_abort_vblank (present_wnmd.c:651)
by 0x53695A: present_free_window_vblank (present_screen.c:87)
by 0x53695A: present_destroy_window (present_screen.c:152)
by 0x42A90D: xwl_destroy_window (xwayland.c:653)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
Address 0x182abde0 is 80 bytes inside a block of size 112 free'd
at 0x4C2FDAC: free (vg_replace_malloc.c:530)
by 0x42A937: xwl_destroy_window (xwayland.c:647)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
by 0x446DA5: ProcKillClient (dispatch.c:3279)
by 0x4476AF: Dispatch (dispatch.c:479)
Block was alloc'd at
at 0x4C30B06: calloc (vg_replace_malloc.c:711)
by 0x433F46: xwl_present_window_get_priv (xwayland-present.c:54)
by 0x434228: xwl_present_get_crtc (xwayland-present.c:302)
by 0x539728: proc_present_query_capabilities (present_request.c:227)
by 0x4476AF: Dispatch (dispatch.c:479)
by 0x44B5B5: dix_main (main.c:276)
by 0x75F611A: (below main) (libc-start.c:308)
This is because `xwl_present_cleanup()` frees the memory but does not
remove it from the window's privates, and `xwl_present_abort_vblank()`
will still find it and hence try to access that freed memory...
Remove `xwl_present_window` from window's privates on cleanup so that no
other function can find and reuse that data once it's freed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1616269
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_output->randr_crtc is used in the update_screen_size() function :
==5331== Invalid read of size 4
==5331== at 0x15263D: update_screen_size (xwayland-output.c:190)
==5331== by 0x152C48: xwl_output_remove (xwayland-output.c:413)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
==5331== by 0x27574B: Dispatch (dispatch.c:421)
==5331== by 0x279945: dix_main (main.c:276)
==5331== Address 0x1aacb5f4 is 36 bytes inside a block of size 154 free'd
==5331== at 0x48369EB: free (vg_replace_malloc.c:530)
==5331== by 0x1F8AE8: RROutputDestroyResource (rroutput.c:421)
==5331== by 0x29A2AC: doFreeResource (resource.c:880)
==5331== by 0x29AE5B: FreeResource (resource.c:910)
==5331== by 0x152BE0: xwl_output_remove (xwayland-output.c:408)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== Block was alloc'd at
==5331== at 0x48357BF: malloc (vg_replace_malloc.c:299)
==5331== by 0x1F93E0: RROutputCreate (rroutput.c:83)
==5331== by 0x152A75: xwl_output_create (xwayland-output.c:361)
==5331== by 0x14BE59: registry_global (xwayland.c:764)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add internal.h to SOURCES, omitted from 126c1cfa
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This prevents multiple scroll events happening for wayland compositors
which send axis values other than 10. For example, libinput will
typically return 15 for each scroll wheel step, and if a wayland
compositor sends those to xwayland without normalising them, 2 scroll
wheel steps will end up as 3 xorg scroll events. By listening for the
discrete_axis event, this will now correctly send only 2 xorg scroll
events.
The wayland protocol gurantees that there will always be an axis event
following an axis_discrete event. However, it does not gurantee that
other events (including other axis_discrete+axis pairs) will not happen
in between them. So we must keep a list of outstanding axis_discrete
events.
Signed-off-by: Scott Anderson <scott@anderso.nz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The X will be crashed on the system with other DDX driver,
such as amdgpu.
show the log like:
randr: falling back to unsynchronized pixmap sharing
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e)
(EE) 1: /usr/lib/xorg/Xorg (0x55cb0151a000+0x1b5ce9)
(EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f1587a1d000+0x11390)
(EE)
(EE) Segmentation fault at address 0x0
(EE)
The issue is that modesetting as the master, and amdgpu as the slave.
Thus, when the master attempts to access pSlavePixPriv in ms_dirty_update(),
problems result due to the fact that it's accessing AMD's 'ppriv' using the
modesetting structure definition.
Apart from fixing crash issue, the patch fix other issue in master interface
in which driver should refer to master pixmap.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Goins <agoins@nvidia.com>
This makes us match the featureset of autotools, and also fixes the
non-Linux default value to match.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
I don't have a BSD to test on, but this should do the same as what
autotools did.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have pm_noop.c being built most of the time for the
no-OS-PM case, so just switch to always using it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is already included in ephyr (the only kdrive server left)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of having every video driver loop over any pending leases to
free them during CloseScreen, do this up in the DIX layer by
terminating leases when a leased CRTC or Output is destroyed and
(just to make sure), also terminating leases in RRCloseScreen. The
latter should "never" get invoked as any lease should be associated
with a resource which was destroyed.
This is required as by the time the driver's CloseScreen function is
invoked, we've already freed all of the DIX randr structures and no
longer have any way to reference the leases
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
Cc: Thomas Hellstrom <thellstrom@vmware.com>
The recent rewrite of modesetting driver broke the 24bpp support.
As typically found on cirrus KMS, it leads to a blank screen, spewing
the error like:
failed to add fb -22
(EE) modeset(0): failed to set mode: Invalid argument
The culript is that the wrong bpp value of the front buffer is passed
to drmModeAddFB(). Fix it by replacing with the back buffer bpp,
drmmode->kbpp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
glamor_fds_from_pixmap() will bail out early if DRI3 is not enabled,
unfortunately Xwayland's glamor code would not set it as enabled which
would lead to blank pixmaps when using texture from pixmap.
Make sure to mark DRI3 as enabled from glamor_egl_screen_init() in
Xwayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107287
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The logical size is the size of the output in the global compositor
space. The mode width/height should be scaled as in the logical
size, but shouldn't be transformed. Thus we need to rotate back
the logical size to be able to use it as the mode width/height.
This fixes issues with pointer input on transformed outputs.
Signed-Off-By: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When setting DefaultDepth to 16 in the Screen section, the current
code requests a 32 bpp framebuffer, however the X-Server seems to
assumes 16 bpp.
Fixes commit 21217d0216 ("modesetting: Implement 32->24 bpp
conversion in shadow update")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
If we're using atomic modesetting, then we're also using universal
planes, and so the lease we create needs to include the plane.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We don't want universal_planes unless we're using atomic APIs for
modesetting, and the kernel already enables universal_planes
automatically when atomic is enabled.
If we enable universal_planes when we're not using atomic, then we
won't have selected a plane for each crtc, and this will break lease
creation which requires planes for each output when universal_planes
is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The DIX crtc and output structures are freed when their resources are
destroyed, which happens before CloseScreen is called. As a result, we
know these pointers are invalid and referencing them during any of the
remaining CloseScreen sequence will be bad.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: thellstrom@vmware.com
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
This lets an application open a suitable DRM device and pass the file
descriptor to the mode setting driver through an X server command line
option, '-masterfd'.
There's a companion application, xlease, which creates a DRM master by
leasing an output from another X server. That is available at
git clone git://people.freedesktop.org/~keithp/xlease
v2:
Always print usage, but note that it can't be used if
setuid/gid
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
When support for allocating GBM BOs with modifiers was added,
glamor_fd_from_pixmap() was changed so that it would return an error if
it got a bo with modifiers set from glamor_fds_from_pixmap(). The
problem is that on systems that support BOs with modifiers,
glamor_fds_from_pixmap() will always return BOs with modifiers.
This means that glamor_fd_from_pixmap() was broken entirely, which broke
a number of other things including glamor_shareable_fd_from_pixmap(),
which meant that modesetting using multiple GPUs with the modesetting
DDX was also broken. Easy reproducer:
- Find a laptop with DRI prime that has outputs connected to the
dedicated GPU and integrated GPU
- Try to enable one display on each using the modesetting DDX
- Fail
Since there isn't a way to ask for no modifiers from
glamor_fds_from_pixmap, we create a shared _glamor_fds_from_pixmap()
function used by both glamor_fds_from_pixmap() and
glamor_fd_from_pixmap() that calls down to the appropriate
glamor_egl_fd*_from_pixmap() function.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
So, this did actually work on older kernels at one point in time,
however it seems that this working was a result of some of the Linux
kernel's atomic modesetting helpers not preserving the CRTC's enabled
state in the right spots. This was fixed in:
846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2")
As a result, atomic commits which simply disassociate a DRM connector
with it's CRTC while leaving the CRTC in an enabled state aren't enough
to disable the CRTC, and result in the atomic commit failing. This
currently can cause issues with MST hotplugging where X will end up
failing to disable the MST outputs after they've left the system. A
simple reproducer:
- Start up Xorg
- Connect an MST hub with displays connected to it
- Remove the hub
- Now there should be CRTCs stuck on the orphaned MST connectors, and X
won't be able to reclaim them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
drmmode_shadow_allocate() still uses drmModeAddFB() which may fail if
the format is not as expected, preventing from using a rotated output.
Change it to use the new function drmmode_bo_import() which takes care
of calling the drmModeAddFB2() API.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106715
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Tomas Pelka <tpelka@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
The API init_wl_registry() and has_wl_interfaces() are marked as being
optional, but both GBM And EGLStream backends implement them so there is
point in keeping those optional.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
When retrieving the Wayland buffer from a pixmap, if the buffer already
exists, the GBM backend will return that existing buffer.
However, as seen with the Present issues, if the call had previously
passed a wrong size, that buffer will remain at the wrong size for as
long as the buffer exists, which is error prone.
Considering that the width/height passed to get_wl_buffer() is always the
actual pixmap drawable size, and considering that the EGLStream backend
makes no use of the size either, there is really no point in passing the
width/height around.
Simplify the xwl_glamor_pixmap_get_wl_buffer() and EGL backends API by
removing the pixmap size, and use the drawable size instead.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_glamor_eglstream_init_egl() uses "EGL_IMG_context_priority"
extension, make sure it's actually available before using it.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Now that we have separate backends for EGLStream and GBM, we can
explicitly check for the EGLStream backend to disable present support
in that case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
To be able to check for availability of the Wayland interfaces required
to run a given EGL backend (either GBM or EGLStream for now), we need
to have each backend structures and vfuncs in place before we enter the
Wayland registry dance.
That basically means that we should init all backends at first, connect
to the Wayland compositor and query the available interfaces and then
decide which backend is available and should be used (or none if either
the Wayland interfaces or the EGL extensions are not available).
For this purpose, hold an egl_backend struct for each backend we are to
consider prior to connect to the Wayland display so that, when we get to
query the Wayland interfaces, everything is in place for each backend to
handle the various Wayland interfaces.
Eventually, when we need to chose which EGL backend to use for glamor,
the available Wayland interfaces and EGL extensions available are all
known to Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Move EGL backends initialization to its own function in
xwayland-glamor.c
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Introduces a new egl_backend function to let the EGL backend check for
the presence of the required Wayland interfaces.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGL backend availability requires both EGL extensions and Wayland
interfaces to be present, so we will need to consider multiple backends
during initialization.
As a preliminary work, move the egl_backend to its own struct so that we
can have more than one backend at any given time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If using a render node, we can skip DRM authentication.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Surely, we should fail to init GBM backend if "GL_OES_EGL_image" is
missing.
This seems to have been lost with commit 1545e2dba ("xwayland: Decouple
GBM from glamor").
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Both xwl_glamor_init_wl_registry() and the Wayland global registry
handler use the interface id/name in that order, using name/id in the
egl_backend vfunc makes things confusing and error prone.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Functions such as:
xwl_glamor_egl_supports_device_probing()
xwl_glamor_egl_get_devices()
xwl_glamor_egl_device_has_egl_extensions()
Are of no use outside of EGLStream support, move them to the relevant
source file.
Similarly, the other glamor functions such as:
xwl_glamor_init()
xwl_screen_set_drm_interface()
xwl_screen_set_dmabuf_interface()
xwl_glamor_pixmap_get_wl_buffer()
xwl_glamor_init_wl_registry()
xwl_glamor_post_damage()
xwl_glamor_allow_commits()
xwl_glamor_egl_make_current()
Are useless without glamor support enabled, move those within a
a "#ifdef XWL_HAS_GLAMOR" in xwayland.h
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Make xwl_output_get_xdg_output() private, it doesn't need to be
available elsewhere.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGLStream requires glamor, but the opposite is not true. So if someone
passes "-eglstream" with a GPU which does not support EGLStream, we
could maybe still try GBM and be lucky.
That allows Wayland compositors to pass "-eglstream" regardless of the
actual hardware, if they want to enable EGLStream on GPU which support
it.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
eglQueryDevicesEXT() would abort if the required extensions are not
available, meaning that enabling “-eglstream” on a non-EGLStream
capable hardware would lead to an abort().
Check that "EGL_EXT_device_base" extension is available and bail out
early if not, so we don't abort() later in eglQueryDevicesEXT().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The command line option "-eglstream" used to enable EGLStream support
for NVidia GPU was made available only when Xwayland was built with
EGLStream support enabled.
Wayland compositors who spawn Xwayland have no easy way to tell whether
or not Xwayland was built with EGLStream support enabled, and adding
"-eglstream" command line option to Xwayland when it wasn't built with
EGLStream support would prevent Xwayland from starting (“Unrecognized
option” error).
Make sure we support the command line option "-eglstream" regardless of
EGLStream support in Xwayland. Obviously, if Xwayland was built without
EGLStream support, this has no effect.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Changes the device name from "xwayland-stylus" to "xwayland-tablet stylus".
This doesn't fully address #26 but it goes a little step into making it more
human-readable.
https://gitlab.freedesktop.org/wayland/wayland/issues/26
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Change the 'chown' statement in Makefile.am to use the numeric UID
of superuser instead of relying on the name 'root'.
Bugzilla: https://bugs.freedesktop.org/27726
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michał Górny <gentoo@mgorny.alt.pl>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In commit 9db2af6f75 (xfree86: Remove xf86{Map,Unmap}VidMem) we
somehow stopped exporting xf86{Read,Write}Mmio{8,16,32}. Since the
function pointer indirection was intended to support dense vs sparse and
sparse support is now gone, we can just make the functions static inline
in compiler.h and avoid all of this.
Bugzilla: https://bugs.gentoo.org/548906
Tested-by: Christopher May-Townsend <chris@maytownsend.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
If the pixmap size does not match the present box size, flickering
occurs.
This can happen when the client changes its size (e.g. switching to
fullscreen), and since the buffer is kept as long as the pixmap is
valid, once the buffer is created, it remains at the wrong (old) size
and causes continuous flickering.
Use the actual pixmap's drawable size instead of the present box to
create the buffer so that it's sized appropriately.
Bugzilla: https://bugs.freedesktop.org/106841
Fixes: 0fb2cca193 "xwayland: Preliminary support for Present's new
window flip mode"
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
We don't want DRM file descriptors to leak to child processes.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
It was passing O_CLOEXEC as permission bits instead of as a flag.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Fixes DRI2 client driver name mapping for newer AMD GPUs with the
modesetting driver, allowing the DRI2 extension to initialize.
Fixes using GL with the modesetting driver for me.
Seems we were way behind on this one, time to look into something
more scalable?
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Modifiers support needs gbm as a dependency. Without setting the dependency
included headers are not found reliably and the build might fail if the
headers are not placed in the default system include paths.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We probably don't want a fake crtc to be visible to clients, and we
definitely don't want to generate events every time we create such a
fake (which would happen as a side effect from RRCrtcCreate hitting
RRTellChanged). As it happens we're not actually using that crtc for
anything because xwayland doesn't store any state on the crtc object,
so it suffices to use the real crtc for the screen.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
We were mixing stdint and CARD* types, causing compiler warnings on
32-bit. Just switch over to stdint, which is what we'd like the server
to be using long term, anyway.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of reusing xwl_window introduce a persistent window struct for every
window, that asks for Present flips.
This struct saves all relevant data and is only freed on window destroy.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
The old 32-Bit wraparound handling didn't actually work, due to some
integer casting bug, and the mapping was ill equipped to deal with input
from the new true 64-bit GetCrtcSequence/QueueCrtcSequence api's
introduced in Linux 4.15.
For 32-Bit truncated input from pageflip events and old vblank events
and old drmWaitVblank ioctl, implement new wraparound handling, which
also allows to deal with wraparound in the other direction, e.g., if a
32-Bit truncated sequence value is passed in, whose true 64-Bit
in-kernel hw value is within 2^30 counts of the previous processed
value, but whose 32-bit truncated sequence value happens to lie just
above or below a 2^32 boundary, iow. one of the two values 'sequence'
vs. 'msc_prev' lies above a 2^32 border, the other one below it.
The method is directly translated from Mesa's proven implementation of
the INTEL_swap_events extension, where a true underlying 64-Bit wide
swapbuffers count (SBC) needs to get reconstructed from a 32-Bit LSB
truncated SBC transported over the X11 protocol wire. Same conditions
apply, ie. successive true 64-Bit SBC values are close to each other,
but don't always get received in strictly monotonically increasing
order. See Mesa commit cc5ddd584d17abd422ae4d8e83805969485740d9 ("glx:
Handle out-of-sequence swap completion events correctly. (v2)") for
explanation.
Additionally add a separate path for true 64-bit msc input originating
from Linux 4.15+ drmCrtcGetSequence/QueueSequence ioctl's and
corresponding 64-bit vblank events. True 64-bit msc's don't need
remapping and must be passed through.
As a reliability bonus, they are also used here to update the tracking
values msc_prev and ms_high with perfect 64-Bit ground truth as baseline
for mapping msc from pageflip completion events, because pageflip events
are always 32-bit wide, even when the new kernel api's are used. Because
each pageflip(-event) is always preceeded close in time (and vblank
count) by a drmCrtcQueueSequence queued event or drmCrtcGetSequence
query as part of DRI2 or DRI3+Present swap scheduling, we can be certain
that each pageflip event will get its truncated 32-bit msc remapped
reliably to the true 64-bit msc of flip completion whenever the sequence
api is available, ie. on Linux 4.15 or later.
Note: In principle at least the 32-bit mapping path could also be
backported to earlier server branches, as this seems to be broken for at
least server 1.16 to 1.19.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
The function is ported from intel-ddx uxa backend around 2013, where its
stated purpose was to apply a vblank_offset to msc values to correct for
problems with those kernel provided msc values. Some (somewhat magic and
puzzling to myself) heuristic tried to guess if provided values were
unreasonable and tried to adapt the corrective vblank_offset to account
for that.
Except: It wasn't applied to kernel provided msc values, but the values
delivered by clients via DRI2 or Present, so valid client targetmsc
values, e.g., requesting a vblank event > 1000 vblanks in the future,
triggered the offset correction in arbitrarily wrong ways, leading to
wrong msc values being returned and thereby vblank events queued to the
kernel for the wrong time. This causes glXSwapBuffersMscOML and
glXWaitForMscOML to swap / return immediately whenever a swap/wait in >
1000 vblanks is requested.
The original code was also written to only deal with 32 bit mscs, but
server 1.20 modesetting ddx can now use new Linux 4.15+ kernel vblank
api to process true 64 bit msc's, which may confuse the heuristic even
more due to 32 bit integer truncation/wrapping.
This code caused various problems in the intel-ddx in the past since
year 2013, and was removed there in 2015 by Chris Wilson in commit
42ebe2ef9646be5c4586868cf332b4cd79bb4618:
" uxa: Remove the filtering of bogus Present MSC values
If the intention was to filter the return values from the kernel, the
filtering would have been applied to the kernel values and not to the
incoming values from Present. This filtering introduces crazy integer
promotion and truncation bugs all because Present feeds garbage into its
vblank requests.
"
Indeed, i found a Mesa bug yesterday which can cause Mesa's
PresentPixmap request to spuriously feed garbage targetMSC's into the
driver under some conditions. However, while other video drivers seem to
cope relatively well with that, modesetting ddx causes KDE-5's
plasmashell to lock up badly quite frequently, and my suspicion is that
the code removed in this commit is one major source of the extra
fragility.
Also my own tests fail for any swap scheduled more than 1000 vblanks
into the future, which is not uncommon for some scientific applications.
Iow. modesetting's swap scheduling seems to be more robust without this
function afaics.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Keith Packard <keithp@keithp.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Copied from Mesa with no modifications.
Gives us Cofeelake platform names updates and sync on Kaby Lake,
Ice Lake PCI IDs.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Clean up only if the request points to the presenting window or its top
parent window.
Since in this case all events are removed unconditionally, always stop
the timer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Roman Gilg <subdiff@gmail.com>
There's no real point - if we don't have EGL then the extension check is
also going to fail - and the entrypoint is new in 1.5.0, which we don't
need to require yet.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
GBM objects were never destroyed after looking for format and
modifier compatibility when deciding whether flipping or copying
a presented pixmap.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106106
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
This adds initial support for displaying Xwayland applications through
the use of EGLStreams and nvidia's custom wayland protocol by adding
another egl_backend driver. This also adds some additional egl_backend
hooks that are required to make things work properly.
EGLStreams work a lot differently then the traditional way of handling
buffers with wayland. Unfortunately, there are also a LOT of various
pitfalls baked into it's design that need to be explained.
This has a very large and unfortunate implication: direct rendering is,
for the time being at least, impossible to do through EGLStreams. The
main reason being that the EGLStream spec mandates that we lose the
entire color buffer contents with each eglSwapBuffers(), which goes
against X's requirement of not losing data with pixmaps. no way to use
an allocated EGLSurface as the storage for glamor rendering like we do
with GBM, we have to rely on blitting each pixmap to it's respective
EGLSurface producer each frame. In order to pull this off, we add two
different additional egl_backend hooks that GBM opts out of
implementing:
- egl_backend.allow_commits for holding off displaying any EGLStream
backed pixmaps until the point where it's stream is completely
initialized and ready for use
- egl_backend.post_damage for blitting the content of the EGLStream
surface producer before Xwayland actually damages and commits the
wl_surface to the screen.
The other big pitfall here is that using nvidia's wayland-eglstreams
helper library is also not possible for the most part. All of it's API
for creating and destroying streams rely on being able to perform a
roundtrip in order to bring each stream to completion since the wayland
compositor must perform it's job of connecting a consumer to each
EGLstream. Because Xwayland has to potentially handle both responding to
the wayland compositor and it's own X clients, the situation of the
wayland compositor being one of our X clients must be considered. If we
perform a roundtrip with the Wayland compositor, it's possible that the
wayland compositor might currently be connected to us as an X client and
thus hang while both Xwayland and the wayland compositor await responses
from eachother. To avoid this, we work directly with the wayland
protocol and use wl_display_sync() events along with release() events to
set up and destroy EGLStreams asynchronously alongside handling X
clients.
Additionally, since setting up EGLStreams is not an atomic operation we
have to take into consideration the fact that an EGLStream can
potentially be created in response to a window resize, then immediately
deleted due to another pending window resize in the same X client's
pending reqests before Xwayland hits the part of it's event loop where
we read from the wayland compositor. To make this even more painful, we
also have to take into consideration that since EGLStreams are not
atomic that it's possible we could delete wayland resources for an
EGLStream before the compositor even finishes using them and thus run
into errors. So, we use quite a bit of tracking logic to keep EGLStream
objects alive until we know the compositor isn't using them (even if
this means the stream outlives the pixmap it backed).
While the default backend for glamor remains GBM, this patch exists for
users who have had to deal with the reprecussion of their GPU
manufacturers ignoring the advice of upstream and the standardization of
GBM across most major GPU manufacturers. It is not intended to be a
final solution to the GBM debate, but merely a baindaid so our users
don't have to suffer from the consequences of companies avoiding working
upstream. New drivers are strongly encouraged not to use this as a
backend, and use GBM like everyone else. We even spit this out as an
error from Xwayland when using the eglstream backend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just a small autogenerated header that will soon contain more then just
one macro.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This takes all of the gbm related code in wayland-glamor.c and moves it
into it's own EGL backend for Xwayland, xwayland-glamor-gbm.c.
Additionally, we add the egl_backend struct into xwl_screen in order to
provide hooks for alternative EGL backends such as nvidia's EGLStreams.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
32 is not a valid depth, and the default is now 24 not 8.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Kludge sdksyms.c generator to not fail on GetClientPid.
It returns pid_t which on NetBSD is #define pid_t __pid_t
This slightly alters the GCC preprocessor output which this fragile
code could not deal with when using GCC 5+
Signed-off-by: Adam Jackson <ajax@redhat.com>
Use the DRM_CAP_ADDFB2_MODIFIERS query to make sure the kms
driver supports modifiers in the addfb2 ioctl, and fall back
to addfb ioctl without modifiers if modifiers are unsupported.
E.g., as of Linux 4.17, nouveau-kms so far does not suppport
modifiers and gets angry if drmModeAddFB2WithModifiers() is
called (-> failure to set a video mode -> blank screen), but
Mesa's nvc0+ gallium driver causes gbm_bo_get_modifier() to
return a valid modifier by translating the default tiling of
bo's created via gbm_bo_create() into a modifier other than
DRM_FORMAT_MOD_INVALID (see Mesa's nvc0_miptree_get_modifier()).
Testing for != DRM_FORMAT_MOD_INVALID is apparently not
sufficient for safe use of drmModeAddFB2WithModifiers.
Bonus: Handle potential failure of populate_format_modifiers().
The required DRM_CAP is defined since libdrm v2.4.65, and we
require v2.4.89+ for the server, so we can use it unconditionally.
Tested on intel-kms, radeon-kms, nouveau-kms. Fixes failure on
NVidia Pascal.
Fixes: 2f807c2324 ("modesetting: Add support for multi-plane pixmaps when page-flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Regardless of the order we un-realize windows.
Suggested-by: Roman Gilg <subdiff@gmail.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
xwl_unrealize_window() would use freed xwl_window which can lead to
various memory corruption and crashes, as reported by valgrind:
Invalid read of size 8
at 0x42C802: xwl_present_cleanup (xwayland-present.c:84)
by 0x42BA67: xwl_unrealize_window (xwayland.c:601)
by 0x541EE9: compUnrealizeWindow (compwindow.c:285)
by 0x57E1FA: UnrealizeTree (window.c:2816)
by 0x581189: UnmapWindow (window.c:2874)
by 0x54EB26: ProcUnmapWindow (dispatch.c:879)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
Address 0xf520f60 is 96 bytes inside a block of size 184 free'd
at 0x4C2EDAC: free (vg_replace_malloc.c:530)
by 0x42B9FB: xwl_unrealize_window (xwayland.c:624)
by 0x541EE9: compUnrealizeWindow (compwindow.c:285)
by 0x57E1FA: UnrealizeTree (window.c:2816)
by 0x581189: UnmapWindow (window.c:2874)
by 0x54EB26: ProcUnmapWindow (dispatch.c:879)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
Block was alloc'd at
at 0x4C2FB06: calloc (vg_replace_malloc.c:711)
by 0x42B307: xwl_realize_window (xwayland.c:488)
by 0x541E59: compRealizeWindow (compwindow.c:268)
by 0x57DA40: RealizeTree (window.c:2617)
by 0x580B28: MapWindow (window.c:2694)
by 0x54EA2A: ProcMapWindow (dispatch.c:845)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
This is because UnrealizeTree() traverses the tree from top to bottom,
which invalidates the assumption that if the Window doesn't feature an
xwl_window on its own, it's the xwl_window of its first ancestor with
one.
This reverts commit 82df2ce3
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
ms_queue_vblank() returns false on failure.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Present support in Xwayland relies on glamor, make sure Xwayland can
be built without glamor by moving references to Present code inside
the conditional GLAMOR_HAS_GBM.
Reported-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Turns out that's legal, and xts exercises it, and we crash:
Thread 1 "Xwayland" received signal SIGSEGV, Segmentation fault.
dixGetPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:122
122 return (char *) (*privates) + key->offset;
(gdb) bt
#0 dixGetPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:122
#1 dixLookupPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:166
#2 xwl_window_of_top (window=0x0) at xwayland.c:128
#3 xwl_cursor_warped_to (device=<optimized out>, screen=0x268b6e0, client=<optimized out>, window=0x0, sprite=0x300bb30,
x=2400, y=1350) at xwayland.c:292
#4 0x00000000005622ec in ProcWarpPointer (client=0x32755d0) at events.c:3618
In this case, x/y are the screen-space coordinates where the pointer
ends up, and we need to look up the (X) window there.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Apparently on NetBSD we can hit failures like this:
sdksyms.c:1773:15: error: expected expression before ',' token
(void *) &, /* ../../dri3/dri3.h:110 */
I've been unable to reproduce that locally (even in a NetBSD vm), but
an obvious workaround might be to just notice empty symbol names and
ignore them rather than emit invalid C code.
Tested-by: Thomas Klausner <wiz@netbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The caller may ignore the return value (will be addressed with later
commit) so simply zero the count from the get-go. We're pretty much do
so, in all cases but one :-\
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The caller may ignore the return value (will be addressed with later
commit) so simply zero the count from the get-go. We're pretty much do
so, in all cases but one :-\
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
It makes it perfectly clear that we should not be modifying them.
Should help highlight issues like the one fixed with previous commit.
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The glamor_pixmap_from_fds error path erroneously closes the fds.
We don't own them, plus the caller closes them after the function in
called.
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
dri3_screen_info is the user provide dispatch. Something that we do
not and should not change.
When using the _ptr typecast + const the compiler barfs at us
(rightfully so), so use the _rec one.
[Silence a new const mismatch warning too - ajax]
Fixes: 5631382988 ("dri3: Add DRI3 extension")
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
4b0a3cba fixed leaking of GLX fbconfigs, so now xwin needs to allocate them
correctly (individually, rather than all at once), so they can be freed
successfully.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This was never merged upstream. It was a Fedora kernel patch but dropped from
Fedora in 2013 with kernel 3.12.
The reason for the KDSKBMUTE proposal has been fixed in systemd in Feb 2013,
systemd 198.
https://lists.freedesktop.org/archives/systemd-devel/2013-February/008795.html
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
[735/786] Generating 'hw/xwayland/Xwayland@exe/relative-pointer-unstable-v1-protocol.c'.
Using "code" is deprecated - use private-code or public-code.
See the help page for details.
Use private-code if wayland-scanner is new enough.
Signed-off-by: Adam Jackson <ajax@redhat.com>
../hw/dmx/config/dmxparse.c: In function ‘dmxConfigCreateOption’:
../hw/dmx/config/dmxparse.c:385:13: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
strncpy(option->string + offset, p->string, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../hw/dmx/config/dmxparse.c:383:23: note: length computed here
int len = strlen(p->string);
^~~~~~~~~~~~~~~~~
The thing it's warning about is intentional, the surrounding code does
its own nul-termination. Make that obvious by using memcpy instead.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
This threw:
../hw/dmx/input/dmxarg.c: In function ‘dmxArgParse’:
../hw/dmx/input/dmxarg.c:128:5: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
strncpy(tmp, string, len);
^~~~~~~~~~~~~~~~~~~~~~~~~
../hw/dmx/input/dmxarg.c:126:11: note: length computed here
len = strlen(string) + 2;
^~~~~~~~~~~~~~
This code predates xstrtokenize, but that's no excuse.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
../hw/dmx/dmxpixmap.c: In function ‘dmxBitmapToRegion’:
../include/regionstr.h:174:22: warning: ‘Box.x1’ may be used uninitialized in this function [-Wmaybe-uninitialized]
(_pReg)->extents = *(_pBox);
~~~~~~~~~~~~~~~~~^~~~~~~~~~
../hw/dmx/dmxpixmap.c:208:12: note: ‘Box.x1’ was declared here
BoxRec Box;
^~~
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
snprintf doesn't terminate the string if it truncates, so things like
this are lurking crashers:
../hw/dmx/dmxprop.c: In function ‘dmxPropertyIdentifier.part.0’:
../hw/dmx/dmxprop.c:94:36: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 123 [-Wformat-truncation=]
snprintf(buf, sizeof(buf), "%s:%s:%s", DMX_IDENT, hostname, display);
^~ ~~~~~~~~
../hw/dmx/dmxprop.c:94:5: note: ‘snprintf’ output 7 or more bytes (assuming 262) into a destination of size 128
snprintf(buf, sizeof(buf), "%s:%s:%s", DMX_IDENT, hostname, display);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../hw/dmx/dmxprop.c: In function ‘dmxPropertyWindow’:
../hw/dmx/dmxprop.c:372:36: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 127 [-Wformat-truncation=]
snprintf(buf, sizeof(buf), "%s,%d", id, dmxScreen->index);
^~
../hw/dmx/dmxprop.c:372:5: note: ‘snprintf’ output between 3 and 140 bytes into a destination of size 128
snprintf(buf, sizeof(buf), "%s,%d", id, dmxScreen->index);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We could be more precise about termination, but meh.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
../hw/xfree86/utils/gtf/gtf.c: In function ‘print_fb_mode’:
../hw/xfree86/utils/gtf/gtf.c:241:50: warning: cast from function call of type ‘double’ to non-matching type ‘int’ [-Wbad-function-cast]
printf(" timings %d %d %d %d %d %d %d\n", (int) rint(1000000.0 / m->pclk), /* pixclock in picoseconds */
That's pretty nitpicky of you, gcc, but at least it's easy to fix.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
We would fail to get the FB ID if it wasn't already imported, since we
were checking to see if the pointer was NULL (it never was) rather than
if the content of the pointer was 0.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
drmmode_crtc_set_mode has a loop nested inside another loop, where both
of them were using 'i' as the loop iterator. Rename it to avoid an
infinite loop.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Non-atomic kms drivers like radeon-kms (or nouveau-kms with
default setting of "atomic ioctl disabled") don't export
any formats, so num_formats == 0.
Some atomic drivers (nouveau-kms with boot param nouveau.atomic=1,
or intel-kms on, e.g., Linux 4.13) expose num_formats == 0, or
don't expose any modifiers, so num_modifiers == 0.
Let the drmmode_is_format_supported() check pass in these cases
to allow page flipping, as it works just fine.
Tested on NV-96 for nouveau, HD-5770 for radeon, Intel Ivybridge
with Linux 4.13 and drm-next to fix page flipping.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We need to make sure that the atomic commit are consistent
or else the kernel will reject it. For example, when moving
a CRTC from one output to another one, the first output CRTC_ID
property needs to be reset. Also if the second output was using
another CRTC beforehands, it needs to be disabled to avoid an
inconsistent state.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
CRTCs and outputs needs to be enabled/disabled when the current
DPMS mode is changed. We also try to do it in an atomic commit
when possible.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of whether or not we fed modifiers into GBM when we allocated
a BO. We'll use this later inside Glamor, to reallocate buffer storage
if we allocate buffer storage using modifiers, and a non-modifier-aware
client requests an export of that pixmap.
This makes it possible to run a compositing manager on an old GLX/EGL
stack on top of an X server which allocates internal buffer storage
using exotic modifiers from modifier-aware GBM/EGL/KMS.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of whether or not we fed modifiers into GBM when we allocated
a BO. We'll use this later inside Glamor, to reallocate buffer storage
if we allocate buffer storage using modifiers, and a non-modifier-aware
client requests an export of that pixmap.
This makes it possible to run a compositing manager on an old GLX/EGL
stack on top of an X server which allocates internal buffer storage
using exotic modifiers from modifier-aware GBM/EGL/KMS.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The newline before the protocl version got lost in commit
6cbefc3e0a. Prior to that commit, the
release date printed a newline at the end:
X.Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.14.12-1-ARCH x86_64
Now, that string gets run together with the version:
X.Org X Server 1.19.99.903 (1.20.0 RC 3)X Protocol Version 11, Revision 0
Build Operating System: Linux
Since the version string printing has a variety of #ifdefs in it, just
add the newline to the begining of the protocol version string.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The framebuffer can include multiple CRTCs in multi-monitors
setup. So we shouldn't use the buffer size but the CRTC size
instead. Rotated displays are shadowed, so we don't need to
worry about it there.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fixes a regression caused by modifiers support. For some hw to
continue working even if not supporting ARGB8888 and ARGB2101010
formats, we assume that all imported BOs are opaque.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Otherwise the same content is shown on all outputs.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.comM>
The respective ISA functions were dropped back in 2008
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Install missing headers to the SDK directory to allow external modules
to properly build against the SDK. After this commit, the list of files
installed in the SDK include directory is the same as the list of files
installed by the autotools-based build.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drmmode_output_dpms is called especially with !output->crtc found in
xf86DisableUnusedFunctions so we have to guard for it, else the server
segfaults:
0 0x00007fdc1706054b in drmmode_output_dpms (output=0x55e15243c210, mode=3) at
drmmode_display.c:2243
1 0x000055e1500b6873 in xf86DisableUnusedFunctions (pScrn=0x55e152133f00) at
xf86Crtc.c:3021
2 0x000055e1500be940 in xf86RandR12CrtcSet (pScreen=<optimized out>,
randr_crtc=0x55e1524b2b90, randr_mode=0x0, x=0, y=0, rotation=<optimized out>,
num_randr_outputs=0, randr_outputs=0x0) at xf86RandR12.c:1244
3 0x000055e1500fa1c2 in RRCrtcSet (crtc=<optimized out>, mode=0x0, x=0, y=0,
rotation=rotation@entry=1, numOutputs=numOutputs@entry=0, outputs=0x0) at
rrcrtc.c:763
4 0x000055e1500fba9e in ProcRRSetCrtcConfig (client=0x55e152bfae50) at
rrcrtc.c:1390
5 0x000055e150044008 in Dispatch () at dispatch.c:478
6 0x000055e150047ff8 in dix_main (argc=13, argv=0x7ffc68561038,
envp=<optimized out>) at main.c:276
7 0x00007fdc1a0c6a87 in __libc_start_main () at /lib64/libc.so.6
8 0x000055e150031d0a in _start () at ../sysdeps/x86_64/start.S:120
Fixes: ba0c75177 ("modesetting: Fix up some XXX from removing GLAMOR_HAS_DRM_*")
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
... for xfree86, at least for now. Things appear to work for Xwayland
but not yet for modesetting. Hopefully we can fix that before 1.20 but
in the meantime this makes testing both paths easier than a rebuild.
Signed-off-by: Adam Jackson <ajax@redhat.com>
We don't use flink in the GetFB import path anymore, as we do an
FD-based import instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link the newly introduced support for Present flips. For now flips can only
be used in rootless mode together with Glamor.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Queue present events to msc values. Fake msc events with a refresh rate of
about 60fps when flips are not possible. When flips are executed rely on
frame callbacks with a slow updating timer as fallback.
This is important for applications, that want to limit their framerate.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the compositor is not sending frame callbacks while we still wait
on buffer release events fake a continuous msc counter with a timer.
Having this timer is a prerequisite for queuing events.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Introduce support for Present's window flip mode. The support is not yet
complete, but works reasonable well for the most important use case, that
is fullscreen applications.
We take a Present flip and if the xwl_window->window has the same dimensions
as the presenting window, the flip is represented by a wl_buffer and attached
to the main wl_surface of the xwl_window.
After commit we are listening for the sync callback in order to tell Present,
that the pixmap flip is not longer pending, for the frame callback in order
to update the msc counter and for the buffer release callback in order to tell
Present that the pixmap is idle again.
The following functionality is missing from this patch:
* (slowed down) flips in case the compositor is not sending frame callbacks,
* queuing events to MSC times,
* per window flips for child windows with smaller size than the xwl_window.
To make use of this functionality Xwayland must run rootless and with
Glamor/GBM.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add arguments to give the caller more information and control
over the creation of a wl_buffer with GBM, in particular let
the caller determine the size of the buffer.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
A cosmetic change for automake (though we have to replicate some of
xorg-macros.m4 in manpages.am now), but meson's configure_file() wants
@-delimited strings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The check for "no modifier specified" in drmmode_is_format_supported()
should check for DRM_FORMAT_MOD_INVALID, not for zero, as zero actually
means DRM_FORMAT_MOD_LINEAR.
This allows page-flipping again when appropriate, as
tested under nouveau and ati drivers.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[... but leave it defined and exported, since we're ABI-frozen - ajax]
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
restore abi
Having different types of code all trying to check for elevated privileges
is a bad idea. This implementation is the most thorough one.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
All the macros are available in the libdrm that we depend on.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We already require libdrm 2.4.89 which provides the definition plus
guarding kernel UABI like that is generally a bad idea.
See previous commit for details why :-)
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The macro was available in libdrm for ages. Furthermore having a guard
like this is a very bad idea.
Building on an old server will result in a missing run-time functionality.
Since it's UABI one can use a local fallback, old kernels will return
-EINVAL and the fallback path will kick in.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This reverts commit 8c455db0eb.
Since xf86platformBus.h is only included when XSERVER_PLATFORM_BUS is
defined, and configure.ac only defines that on systems with udev, this
commit breaks the build on non-udev systems like Solaris.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Copied from Mesa with no modifications.
Gives us Geminilake and Kaby Lake platform names updates and
sync on Coffee Lake PCI IDs.
Cc: Timo Aaltonen <timo.aaltonen@canonical.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using modifier might allow the driver to use a more optimal format
(e.g. tiled/compressed). Let's try to use those if possible.
v2: Don't filter out multi-plane modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It relies on GBM >= 17.1.0 where we can import BO with multiple
planes and a format modifier (GBM_BO_IMPORT_FD_MODIFIER).
v2: Properly free fds in Xwayland
[Also add glamor_egl_ext.h to Makefile.am for distcheck's sake - ajax]
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add support for 'check_flip2' so that the present core can know
why it is impossible to flip in that scenario. The core can then
let know the client that the buffer format/modifier is suboptimal.
v2: No longer need to implement 'check_flip'
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Use most optimal buffer format (e.g. tiled/compressed) available
for scanout.
v2: Don't use multi-plane modifier to create scanout buffer
v3: Add flag to retrieve modifiers set from enabled CRTCs only
v4: Fix uses when GBM/EGL driver doesn't support modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Retrieve IN_FORMATS property from the plane. It gives the
allowed formats and modifiers for BO allocation.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
To make sure we also use the same primary plane and to avoid
mixing uses of two APIs, it is better to always use the atomic
modesetting API when possible.
v2: Don't use mode_output->connector_id
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allows the uses of CCS compressed or tiled pixmaps as BOs when
page-flipping.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Initial implementation for DRI3 v1.1. Only the DRI3 implementation
is there, backends need to implement the proper hooks.
Version is still set to 1.0 so clients shouldn't use the new
requests yet.
v2: Use depth/bpp instead of DRM formats in requests
v3: Remove DMA fence requests from v1.1
Add screen/drawable modifier sets
v4: Free array returned by 'get_drawable_modifiers()'
v5: Fix FD leak
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This lets a DRM client map between X outputs and kernel connectors.
v2:
Change CONNECTOR_ID to enum -- Adam Jackson <ajax@nwnk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Save any value of the kernel non-desktop property in the xf86Output
structure to avoid non-desktop outputs in the default configuration.
[Also bump randrproto requirement to a version that defines
RR_PROPERTY_NON_DESKTOP - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
At startup, we want to ignore non-desktop monitors unless we don't
find any desktop monitors. Because there are no DIX RandR resources
allocated, let the driver store this information in a new field in the
xf86Output structure and then use that value to help decide whether to
include an output as part of the default configuration.
v2:
Suggested-by: Michel Dänzer <michel@daenzer.net>
Bump XF86_CRTC_VERSION from 7 to 8. This will let out-of-tree
drivers know whether this field is available.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
glamor now supports depth 30, so allow use of it.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
This retains old behavior for depths <= 24, but allows gamma
table and colormap updates to work properly at depth 30.
This needs the xf86Randr12CrtcComputeGamma() fix for depth 30
from a previous commit to work. Otherwise the server will work,
but gamma table updates will silently fail, iow. the server
would always run with a default identity gamma lut.
v2: Simplify as proposed by Michel.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk> (v1)
At screen depths > 24 bit, the color palettes passed into
xf86Randr12CrtcComputeGamma() can have a larger number of slots
than the crtc's hardware lut. E.g., at depth 30, 1024 palette
slots vs. 256 hw lut slots. This palette size > crtc gamma size
case is not handled yet and leads to silent failure, so gamma
table updates do not happen.
Add a new subsampling path for this case.
This makes lut updates work again, as tested with the xgamma
utility (uses XF86VidMode extension) and some RandR based
gamma ramp animation.
v2: Better resampling when subsampling the palette, as
proposed by Ville. Now reaches the max index of the
palette and deals with non-power-of-two sizes. Thanks.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk> (v1)
Cc: <ville.syrjala@linux.intel.com>
Support x-screens of depth 30, so init doesn't fail.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Turns out that the kernel DRM ioctl handling returns EINVAL
instead of ENOTTY if one tries to call the new drmCrtcGetSequence()
or drmCrtcQueueSequence() ioctl's introduced in Linux 4.15 on an
older kernel where they are missing. This causes the fallback code
not to fall back to the old drmWaitVblank() ioctl and thereby
failure of vblank stuff.
E.g., on Linux 4.13, glxgears -info runs unthrottled at 10000 fps
instead of 60 fps. Also breakage of OML_sync_control extension.
Check for errno != EINVAL before setting has_queue_sequence = TRUE.
Additionally in case of supported drmCrtcQueueSequence(), set
has_queue_sequence = TRUE on success, or we might get at
least a temporary failure in ms_queue_vblank().
One slight ambiguity is that we can also get EINVAL if
drm_crtc_vblank_get() fails in the kernel, so if that
happened at first invocation of the new api, we'd fall
back to drmWaitVblank() and then fail there, instead of
failing in the new api, but the end result would be the
same.
Fixes: 44d5f2eb8a ("xf86-video-modesetting: Support new vblank kernel API [v2]")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Add the missing arguments to the function signature.
Fixes: e46820fb89 ("miinitext: introduce LoadExtensionList() to replace
over LoadExtension()")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When xdg_output support was added to Xwayland, need_rotate parameter was
added to output_get_new_size where true gave you the old pre-xdg_output
behavior and false gave the new behavior. Unfortunately, the two places
where this is called, need_rotate was set backwards. This caused input
get clampped to the wrong dimensions. Also, the logic for deciding
whether or not to flip was wrong because, if need_rotate was false, it
would always flip which is not what you want.
v2 (Daniel Stone):
- Fix output_get_new_size so that it doesn't flip the dimensions when
need_rotate is false.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This call was forgotten to be removed in
90996f5909 in which
hostx_destroy_shm_segment() was introduced, which
itself does it.
Signed-off-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Adam Jackson <ajax@redhat.com>
/home/ajax/git/xserver/at/../hw/dmx/input/dmxinputinit.c: In function ‘dmxInputInit’:
/home/ajax/git/xserver/at/../hw/dmx/input/dmxinputinit.c:1019:9: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
int found;
Signed-off-by: Adam Jackson <ajax@redhat.com>
Add a stub for Xnest so it continues to link, but otherwise we support
GLX on every server so there's no need to make every DDX add it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The big change here is MakeCurrent and context tag tracking. We now
delegate context tags entirely to the vnd layer, and simply store a
pointer to the context state as the tag data. If a context is deleted
while it's current, we allocate a fake ID for the context and move the
context state there, so the tag data still points to a real context. As
a result we can stop trying so hard to detach the client from contexts
at disconnect time and just let resource destruction handle it.
Since vnd handles all the MakeCurrent protocol now, our request handlers
for it can just be return BadImplementation. We also remove a bunch of
LEGAL_NEW_RESOURCE, because now by the time we're called vnd has already
allocated its tracking resource on that XID.
v2: Update to match v2 of the vnd import, and remove more redundant work
like request length checks.
v3: Add/remove the XID map from the vendor private thunk, not the
backend. (Kyle Brenneman)
v4: Fix deletion of ghost contexts (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Unfortunately, on my machine Xwayland immediately crashes when I try to
start it. gdb backtrace:
#0 0x00007ffff74f0e79 in wl_proxy_marshal () from target:/lib64/libwayland-client.so.0
#1 0x0000000000413172 in zwp_confined_pointer_v1_destroy (zwp_confined_pointer_v1=0x700000000)
at hw/xwayland/Xwayland@exe/pointer-constraints-unstable-v1-client-protocol.h:612
#2 0x0000000000418bc0 in xwl_seat_destroy_confined_pointer (xwl_seat=0x8ba2a0)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2839
#3 0x0000000000418c09 in xwl_seat_unconfine_pointer (xwl_seat=0x8ba2a0)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2849
#4 0x0000000000410d97 in xwl_cursor_confined_to (device=0xa5a000, screen=0x8b9d80, window=0x9bdb70)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland.c:328
#5 0x00000000004a8571 in ConfineCursorToWindow (pDev=0xa5a000, pWin=0x9bdb70, generateEvents=1,
confineToScreen=0) at /home/lyudess/Projects/xserver/dix/events.c:900
#6 0x00000000004a94b7 in ScreenRestructured (pScreen=0x8b9d80)
at /home/lyudess/Projects/xserver/dix/events.c:1387
#7 0x0000000000502386 in RRScreenSizeNotify (pScreen=0x8b9d80)
at /home/lyudess/Projects/xserver/randr/rrscreen.c:160
#8 0x000000000041a83c in update_screen_size (xwl_output=0x8e7670, width=3840, height=2160)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:203
#9 0x000000000041a9f0 in apply_output_change (xwl_output=0x8e7670)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:252
#10 0x000000000041aaeb in xdg_output_handle_done (data=0x8e7670, xdg_output=0x8e7580)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:307
#11 0x00007ffff50e9d1e in ffi_call_unix64 () at ../src/x86/unix64.S:76
#12 0x00007ffff50e968f in ffi_call (cif=<optimized out>, fn=<optimized out>, rvalue=<optimized out>,
avalue=<optimized out>) at ../src/x86/ffi64.c:525
#13 0x00007ffff74f3d8b in wl_closure_invoke () from target:/lib64/libwayland-client.so.0
#14 0x00007ffff74f0928 in dispatch_event.isra () from target:/lib64/libwayland-client.so.0
#15 0x00007ffff74f1be4 in wl_display_dispatch_queue_pending () from target:/lib64/libwayland-client.so.0
#16 0x00007ffff74f200b in wl_display_roundtrip_queue () from target:/lib64/libwayland-client.so.0
#17 0x0000000000418cad in InitInput (argc=12, argv=0x7fffffffd9c8)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2867
#18 0x00000000004a20e3 in dix_main (argc=12, argv=0x7fffffffd9c8, envp=0x7fffffffda30)
at /home/lyudess/Projects/xserver/dix/main.c:250
#19 0x0000000000420cb2 in main (argc=12, argv=0x7fffffffd9c8, envp=0x7fffffffda30)
at /home/lyudess/Projects/xserver/dix/stubmain.c:34
This appears to be the result of xwl_cursor_confined_to() and
xwl_screen_get_default_seat(). While not against protocol, mutter ends
up sending xdg_output before wl_seat. xwl_screen_get_default_seat()
makes the naïve assumption that we always have a valid seat, we end up
returning a pointer to the empty list itself instead of an actual seat
and causing ourselves to segfault.
So, actually return NULL in xwl_screen_get_default_seat() if the seat
list is empty, and skip any pointer confinement processing in
xwl_cursor_confined_to() when we don't have a seat setup yet.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
DoConfigure() attempts to call the PreInit handler on a device without
checking that the handler exists.
Check that the PreInit handler exists for a device before attempting to
call it.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the dev2screen is sized to xf86NumDrivers in DoConfigure(),
subsequent code may attempt to write past the end of the array.
Size the dev2screen array to nDevToConfig instead.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Commits b5dffbb and d75ffcd introduce code in xf86platformProbe() that
references a member of xf86configptr. However, when using the
"-configure" option, xf86configptr may not be initialized when
xf86platformProbe() is called.
Avoid referencing a member of xf86configptr if uninitialized.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100405
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
dri2.c:516:21: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (front->name < 0)
Prevents a failure from being ignored.
xf86pciBus.c:1464:21: warning: comparison of constant 256 with expression of type 'uint8_t' (aka 'unsigned char') is always true [-Wtautological-constant-out-of-range-compare]
if (pVideo->bus < 256)
The code used to be in xf86FormatPciBusNumber and compared parameter which was int, but since b967bf2a it was inlined now it works with uint8_t.
Problem: Xdmx exit with error "(Fatal Error) dmx: Unknown input argument: "
if local input driver is specified (example: -input local,usb-kbd,usb-mou).
Cause: code block for remote input drivers is placed in code path common
for all drivers.
Fix: affected code block moved to remote input driver code path part.
Signed-off-by: Raimonds Cicans <ray@apollo.lv>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This makes the shared memory visible only for the Xephyr
and the X server to which it is connected.
Signed-off-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Keith Packard <keithp@keithp.com>
xf86PruneDuplicateModes is passed a linked list of modes, and after
pruning the duplicate nodes, the new head of the list is returned. If
the first element is removed, the head of the list will change and the
returned value needs to be assigned.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103722
Thanks: John Lumby <johnlumby@hotmail.com>
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The only way to get at xf86Info.disableRandR from configuration is
Option "RANDR" "foo" in ServerFlags, which probably nobody is using
seeing as it's not documented. The other way it could be set is if a
screen supports RANDR 1.2, in which case we set it to avoid trying to
use the RANDR 1.1 compat code. If the second screen is not 1.2-aware
then this would mean we don't do RANDR setup on the second screen at
all, which would almost certainly crash the first time you try to do
RANDR operations on the second screen.
Fix that all by deletion, and just check whether the screen already has
RANDR initialized before installing the stub support. If you want to
disable RANDR, use the Extensions section of xorg.conf instead.
v2: Also remove a now entirely pointless log message, telling you to
ignore a line we will no longer print.
v3: Explain the fallback path in InitOutput. (Keith Packard)
v4: Check whether the RANDR private key is initialized before trying to
use it to look up the screen private.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Place a manual redirect on windows on xwl_realize_window() and remove
it on xwl_unrealize_window() to avoid the X11 window manager removing
its redirect before Xwayland has unrealized the window (e.g. if the X11
window manager has terminated unexpectedly)
Suggested by Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This is a rare occurrence of a crash in Xwayland for which I don't have
the reproducing steps, just a core file.
The backtrace looks as follow:
#0 raise () from /usr/lib64/libc.so.6
#1 abort () from /usr/lib64/libc.so.6
#2 OsAbort () at utils.c:1361
#3 AbortServer () at log.c:877
#4 FatalError () at log.c:1015
#5 OsSigHandler () at osinit.c:154
#6 <signal handler called>
#7 xwl_glamor_pixmap_get_wl_buffer () at xwayland-glamor.c:162
#8 xwl_screen_post_damage () at xwayland.c:514
#9 block_handler () at xwayland.c:665
#10 BlockHandler () at dixutils.c:388
#11 WaitForSomething () at WaitFor.c:219
#12 Dispatch () at dispatch.c:422
#13 dix_main () at main.c:287
The crash is caused by dereferencing “xwl_pixmap->buffer” in
xwl_glamor_pixmap_get_wl_buffer() because “xwl_pixmap” is NULL.
Reason for this is because the corresponding pixmap is from the root
window and xwayland is rootless by default.
This can happen if the window was mapped, redirected, damaged and
unredirected immediately, before the damage is processed by Xwayland.
Make sure to remove the dirty window from the damage list on unrealize
to prevent this from happening.
Credit goes to Adam Jackson <ajax@nwnk.net> and Daniel Stone
<daniel@fooishbar.org> for finding the root cause the issue.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
BTN_STYLUS3 has been introduced by the Linux 4.15 kernel to report the
status of the third button present on Wacom's new "Pro Pen 3D" stylus.
Treat this button like xf86-input-wacom and send a button 8 event
("navigate back") when received from Wayland.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A. Wilcox
Adam Jackson
Michel Dänzer
Maya Rashish
Olivier Fourdan
Roman Gilg
Ilia Mirkin
Lyude Paul
Alan Coopersmith
Eric Anholt
Matthieu Herrb
rpm-build
Michal Srb
Peter Hutterer
Jon Turney
Ross Burton
Dave Airlie
Julien Isorce
Lionel Landwerlin
Scott Anderson
Jim Qu
Keith Packard
Takashi Iwai
emersion
Stefan Agner
Michał Górny
Matt Turner
Bas Nieuwenhuizen
Mario Kleiner
Anuj Phogat
Louis-Francis Ratté-Boulianne
Thomas Klausner
Emil Velikov
Daniel Stone
Aaron Plattner
Thierry Reding
Tobias Klausmann
Nicolai Hähnle
Rodrigo Vivi
Laurent Carlier
Jeffrey Smith
Jason Ekstrand
Alexander Volkov
Raimonds Cicans
Jason Gerecke