These two tests were dependent on each other, the second test relied on
the xtest devices created in the first test. Let's move the bits that
are shared out into the main function instead to illustrate this better.
This lets us add a call to CloseDownDevices() that will remove the leaks
in this set of tests.
Without this, systemd will be used if installed on the system automagically,
which is a problem if the built e.g. Xwayland is going to be used on a non-systemd
machine.
Bug: https://bugs.gentoo.org/908254
Signed-off-by: Sam James <sam@gentoo.org>
Do not create a pipeline for $CI_PIPELINE_SOURCE == 'push' if
$CI_OPEN_MERGE_REQUESTS is set, which means there are open MRs using
the branch as the source.
A clip should represent the area that is covering the current FB associated
with the CRTC. So making sure each input rect covers any area in the FB is
the first thing to do. If that is the case, the size and coordinates should
be adjusted based on the partial area in the FB the each rect covers. The size
elements need to be truncated if the rect's size exceeds FB's for the CRTC.
Then offsets should be applied to coordinates if the CRTC's offsets aren't 0.
And coordinate transposing and inversion are needed in case the rotated image
is assigned to the FB.
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
If we remove a master device and specify which other master devices
attached slaves should be returned to, enforce that those two are
indeeed a pointer and a keyboard.
Otherwise we can try to attach the keyboards to pointers and vice versa,
leading to possible crashes later.
xserver fails to generate useable resolutions with 90Hz framerate
panels(encounter the same issue with 3 different 2.5k resolution
panels). All the resolutions shown by xrandr lead to blank screen except
the one written in EDID.
Ville Syrjälä from Intel provides a method to calculate the preferred
clock and refresh rate from the existing resolution table and this
works for the issue.
v2. xf86ModeVRefresh might return 0, need to check it before use it.
v3. reported by Markus on launchpad that the issue is not devided by 0,
it's the "preferred" being accessed unconditionally.
BugLink: https://launchpad.net/bugs/1999852
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1388
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
With the potential modeset vs. modifiers issue covered by
commit 899c87af1f ("modesetting: unflip before any setcrtc() calls")
we can safely enable modifiers by default, at least on Intel
hardware where we know that things work properly.
I suppose the one open question is whether everything will work
correctly with wonky multi-GPU setups? I don't have one to test
myself.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This allows applications to respond to changes of power level
of a monitor, e.g. an application may stop rendering and related
calculations when the monitor is off.
Related bug: https://bugs.freedesktop.org/57120
Signed-off-by: Alexander Volkov <avolkov@astralinux.ru>
Xwayland uses OEFFIS_DEVICE_ALL_DEVICES to get all possible device types
enabled.
Be more selective and specify explicitly keyboard and pointer instead of
relying on what "all devices" translates to in the stack.
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/3194
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
I was seeing SIGBUS errors when running TigerVNC inside the record code
because the offsets into the memory buffer were not sufficiently aligned
to use the RecordSetRec (alignof(void*)). The current code ensures that
all offsets are aligned to sizeof(unsigned long), but that may not be
sufficient to load/store a pointer. Architectures where this is not true
include Arm Morello which has 16-byte pointers and 8-byte longs.
After resizing Xephyr's window RRGetCrtcInfo returns the changed size,
but the RRCrtcChangeNotify event is not sent.
Call RRGetInfo(pScreen, TRUE) to update the current mode and send
notifications to clients.
In commit 7e1f86d4 monitor support was added to randr. At this time it seemed to be reasonable not to have
more than one (virtual) monitor on a particular physical display. The code was never changed since.
Nowadays, extremely large displays exists (4k displays, ultra-wide displays). In some use cases it makes sense to
split these large physical displays into multiple virtual monitors. An example are ultra-wide screens that can be
split into 2 monitors. The change in this commit makes this work.
Besides that, removing a monitor in a function that is called "RRMonitorAdd" is bad practice and causes
unexpected behaviour.
On certain system deployments, /dev/dri/card* nodes aren't directly
accessible to the currently logged in user, but the display server only
access it by asking systemd-logind to open the device for it. This
causes the X server to fail when trying to re-open the card* device
directly, causing all use of DRI3 to fail.
Fix this by using the render device path instead where possible.
When calling RRSetMonitor, an existing monitor name is allowed.
"If 'name' matches an existing Monitor on the screen, the existing one
will be deleted as if RRDeleteMonitor were called."
https://cgit.freedesktop.org/xorg/proto/randrproto/tree/randrproto.txt
It looks like the check was added by mistake, because in the next 'for'
the monitor is deleted if it is in this list.
Steps to reproduce:
Try RRSetMonitor with existing monitor name and other valid params
OBSERVED RESULT:
RRSetMonitors returns BadValue
EXPECTED RESULT:
RRSetMonitors returns OK
Amend: 7e1f86d42b
Signed-off-by: Ilya Pominov <ipominov@astralinux.ru>
Add a workaround to accept devices of the kernel's ofdrm driver.
Makes Xorg work on Open Firmware's pre-configured display with the
DRM graphics stack.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Resolve symbolic links before the PCI device check in fbdev_open.
Otherwise, opening device files that are symbolic links will fail.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1419
Signed-off-by: Moritz Bruder <muesli4@gmail.com>
TearFree support has been available in the modesetting driver for a year
with no issues reported. The code is mature and robust, with error handling
that's been vetted across many hardware configurations.
Notably, TearFree is also the only way to achieve a tear-free desktop with
mismatched displays and transformed CRTCs.
Enable TearFree by default for a smooth desktop experience out of the box.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Stop putting stack garbage into the gamma LUT blob reserved
fields.
Fixes: 245b9db03a ("modesetting: Use GAMMA_LUT when available")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Try to minimize the used hw cursor size in order to
minimize power consumption. There is no kernel query
for the minimum so we'll just probe around with
setcursor2 (using an invisible cursor image so
there will be no visual artifacts).
To avoid having to deal with absolutely every size stick
to power-of-two numbers. And with a bit of extra effort
we can determine whether non-square dimesions will also
work, which they do to some degree on current Intel GPUs.
On my Alderlake laptop I'm seeing a massive (up to .5W)
difference in power consumption between 64x64 vs. 256x256
cursors. While some of that is undoubtedly something that
needs to be fixed in i915's display data buffer allocation
code, it still makes sense to use as small as possible
cursor to minimize the wastege.
In case the crtc is rotated just punt to the max cursor size
for now since midlayer has already done the coordinate
transformations based on that. To make smaller cursors work
with rotation we'd either need to make the midlayer(s) aware
of the final cursor size, or just handle the whole roation
business in modesetting. I suspect the latter option would
be easier.
v2: Only allow square cursors in most cases for now as eg.
on modern Intel hardware non-square only works with
wide+short but not with narrow+tall cursors. Non-square
size may still be used when maximum limits aren't
square and the squared+POT'd dimensions would exceed
one of the max limits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Make sure we're not scanning out any fbs with fancy modifiers when
we try to light up new displays. This is already the case in cases
where the screen gets resized, but in cases where that doesn't happen
it might be possible for the modeset(s) to fail due to watermark/etc.
constraints imposed by the fancy modifiers. We can avoid that by
making sure everything gets unflipped before the modeset.
v2: make poll timeout infinite
s/in_modeset/pending_modeset/
deal with tearfree fallout (goto no_flip)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
button->xkb_acts is supposed to be an array sufficiently large for all
our buttons, not just a single XkbActions struct. Allocating
insufficient memory here means when we memcpy() later in
XkbSetDeviceInfo we write into memory that wasn't ours to begin with,
leading to the usual security ooopsiedaisies.
CVE-2023-6377, ZDI-CAN-22412, ZDI-CAN-22413
This vulnerability was discovered by:
Jan-Niklas Sohn working with Trend Micro Zero Day Initiative
Affected are ProcRRChangeProviderProperty and ProcRRChangeOutputProperty.
See also xserver@8f454b79 where this same bug was fixed for the core
protocol and XI.
This fixes an OOB read and the resulting information disclosure.
Length calculation for the request was clipped to a 32-bit integer. With
the correct stuff->nUnits value the expected request size was
truncated, passing the REQUEST_FIXED_SIZE check.
The server then proceeded with reading at least stuff->num_items bytes
(depending on stuff->format) from the request and stuffing whatever it
finds into the property. In the process it would also allocate at least
stuff->nUnits bytes, i.e. 4GB.
CVE-2023-6478, ZDI-CAN-22561
This vulnerability was discovered by:
Jan-Niklas Sohn working with Trend Micro Zero Day Initiative
X11 clients tend to assume that pointers have buttons. This
assumption means they often fail to handle the X error that
is generated when querying the button mapping of a pointer
device that lacks buttons.
This failure to handle the X error leads to those client
applications to abruptly exit.
This commit assigns vestigial buttons to the gesture pointer
device for the sole purpose of backward compatibility with
legacy X11 clients.
That technique is already employed for a different pointer,
the relative pointer device, for similar reasons, so this
just makes the legacy client compatibility more complete.
See https://gitlab.gnome.org/GNOME/mutter/-/issues/2353
When creating the output with the default "XWAYLAND<n>" name, we use
the MAX_OUTPUT_NAME value to allocate a lot more memory than necessary
to accommodate for future output names once they get updated, but by
doing so, we also send XRandR way too much (zeroed) data since the
"nameLength" value is (purposely) set too big.
So, instead, let's just update the name after creating the RR output,
this way we set both the name and nameLength to their correct values
while keeping the initial large allocation.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 3c07a01c42 - xwayland: Use xdg-output name for XRandR
Reviewed-by: Simon Ser <contact@emersion.fr>
At creation, Xwayland uses a generic output name ("XWAYLAND0", etc.) for
the XRandR outputs, and later, once the name is known from the Wayland
protocols, updates the output names using the actual names from the
Wayland compositor.
However, when doing so, it simply updates the string, the "nameLength"
isn't updated, so the name passed to the clients might either end up
being truncated or contain portions of the previous (initial) output
name.
Note, this is using a fixed size buffer initialized with zeros, so this
cannot leak any data other than the previous output name, so this is
mainly a cosmetic issue.
Update the output's "nameLength" when updating the output name.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 3c07a01c42 - xwayland: Use xdg-output name for XRandR
Reviewed-by: Simon Ser <contact@emersion.fr>
This reverts commit 947d1c7ecf.
lnx_platform.c doesn't exist in this branch since commit 54681238
renamed it to shared/drm_platform.c and added it to the BSD build.
Fixes build failures in CI of:
../hw/xfree86/os-support/meson.build:163:18: ERROR: File linux/lnx_platform.c does not exist.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This commit adds RGB565 format to XVideo with reuse of RGBA32 shader
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Yuriy Vasilev <uuvasiliev@yandex.ru>
This commit adds RGBA32 format to XVideo along with shader for handling it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Yuriy Vasilev <uuvasiliev@yandex.ru>
This commit adds UYVY format in XVideo for Glamor
along with shader support.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Konstantin <ria.freelander@gmail.com>
As a preparation to one-plane formats (for example, UYVY), second
texture definition is moved inside a format switch, and all allocations
now also done inside a texture switch.
No functional change.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Konstantin <ria.freelander@gmail.com>
Xv currently calls glamor_xv_free_port_data at the end of every putImage.
This leads to shader recompilation for every frame, which is a huge performance loss.
This commit changes behaviour of glamor_xv_free_port_data, and its now is called only
if width, height or format is changed for xv port.
Shader management also done in a port now, because if shaders will be
stored in core glamor and try to be reused, this can lead to a bug if we
try to play 2 videos with different formats simultaneously.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Konstantin <ria.freelander@gmail.com>
There is a no need to force a low version for XV shaders, it will
work on higher version too.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Konstantin <ria.freelander@gmail.com>
The Wayland interfaces have a "name" field that we can use instead of
hardcoding their name.
Change the code to use that name instead of the static strings.
This was inspired by a similar change in mutter by Robert Mader
<robert.mader@collabora.com>.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland offers a way for the window and compositing manager to hold the
surface commits through an X11 property _XWAYLAND_ALLOW_COMMITS.
Xwayland, however, does not actually check if the X11 client changing
the value of that property is indeed the X11 window manager, so any X11
client can potentially interfere with the Wayland surface mechanism.
Restrict access to the _XWAYLAND_ALLOW_COMMITS property to read-only,
except for the X11 window manager and the Xserver itself.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Peter Hutterer
Luke Dashjr
Olivier Fourdan
Sam James
Michel Dänzer
Dongwon Kim
Izumi Tsutsui
xurui
Chia-Lin Kao (AceLan)
Ville Syrjälä
Alexander Volkov
Zoltán Böszörményi
Alex Richardson
Alexander Volkov
Twaik Yont
Michael Wyraz
msizanoen1
Ilya Pominov
Thomas Zimmermann
Moritz Bruder
Jan Beich
Sultan Alsawaf
Alexey
Warren Togami
Alan Coopersmith
Yuriy Vasilev
Konstantin