Use the correct macro for the font change of a single argument or
split the argument into two.
43:.BI Keyboard
46:.BI Pointer
52:.BI PointerAbsolute
58:.BI PointerAbsoluteProximity
62:.BI Touch
103:.BI xf86ITEventWaitForSync
-.-.
Wrong distance between sentences in the input file.
Separate the sentences and subordinate clauses; each begins on a new
line. See man-pages(7) ("Conventions for source file layout") and
"info groff" ("Input Conventions").
19:server as input events. It supports the full set of the xf86 driver APIs
20:exposed by Xorg. The primary use cases of this input driver are various
29:is created after the driver is initialized. The paths to the socket is passed
37:Sets the path where the driver will create a named socket. Any existing file
47:Initializes a relative-mode pointer device. It will have four valuators -
53:Initializes an absolute-mode pointer device. It will have four valuators -
87:specifies the protocol version supported by it. If this version is lower than
91:to the driver. Each event is an instance of one of the
93:structs. The length field defines the full length of the struct in bytes and
96:The responses from the server follow the same structure. Each response is an
99:structs. The length field defines the full length of the struct in bytes and
104:event. After sending such event, the client must read of a
106:events. The completion of the read operation indicates that Xorg has fully
-.-.
The name of a man page is typeset in bold and the section in roman
(see man-pages(7)).
24:Please refer to xorg.conf(5) for general configuration
112:Xorg(1), xorg.conf(5), Xserver(1), X(7)
-.-
Additionally:
"read of a xf86... event" -> "read an xf86... event"
Originally from: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1095449
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1875>
Wrong distance between sentences in the input file.
Separate the sentences and subordinate clauses; each begins on a new
line. See man-pages(7) ("Conventions for source file layout") and
"info groff" ("Input Conventions").
Mark a final abbreviation point as such by suffixing it with "\&".
25:Disables acceleration of uploading pixmap data to the framebuffer. Default: No.
-.-.
Split a punctuation mark from a single argument for a two-font macro
40:.BR xorg.conf(5).
-.-.
Section headings (.SH and .SS) do not need quoting.
38:.SH "SEE ALSO"
-.-.
Output from "test-groff -mandoc -t -K utf8 -rF0 -rHY=0 -rCHECKSTYLE=10 -ww -z ":
an.tmac:<stdin>:40: misuse, warning: .BR is for at least 2 arguments, got 1
Use macro '.B' for one argument or split argument.
Originally from: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1095446
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1875>
Output from "mandoc -T lint Xserver.1": (possibly shortened list)
mandoc: Xserver.1:117:4: WARNING: undefined escape, printing literally: \+
mandoc: Xserver.1:118:81: STYLE: input text line longer than 80 bytes: Allow connections fr...
mandoc: Xserver.1:122:84: STYLE: input text line longer than 80 bytes: Prohibit connections...
Add a comma (or \&) after "e.g." and "i.e.", or use English words
(man-pages(7)).
81:sets pointer acceleration (i.e. the ratio of how much is reported to how much
273:sets pointer acceleration threshold in pixels (i.e. after how many pixels
468:contain either an Internet hostname (e.g. expo.lcs.mit.edu)
Split lines longer than 80 characters into two or more lines.
Appropriate break points are the end of a sentence and a subordinate
clause; after punctuation marks.
Xserver.1: line 118 length 81
Allow connections from clients with an endianess different to that of the server.
Xserver.1: line 122 length 84
Prohibit connections from clients with an endianess different to that of the server.
Originally from: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1072500
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1875>
Wrong distance between sentences.
Separate the sentences and subordinate clauses; each begins on a new
line. See man-pages(7) ("Conventions for source file layout") and
"info groff" ("Input Conventions").
Split lines longer than 100 characters into two or more lines.
Appropriate break points are the end of a sentence and a subordinate
clause; after punctuation marks.
"[" and "]", showing optional arguments to options, should be typeset in roman.
Output from "test-groff -b -mandoc -dAD=l -rF0 -rHY=0 -t -w w -z -rSTYLECHECK=3":
an.tmac:<stdin>:104: style: .BI expects at least 2 arguments, got 1
troff: backtrace: '/home/bg/git/groff/build/s-tmac/an.tmac':524: macro 'B'
troff: backtrace: file '<stdin>':167
troff:<stdin>:167: warning: cannot select font 'F'
Originally from: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1041094
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1875>
xtrans 1.6 will use struct sockaddr_storage if HAVE_STRUCT_SOCKADDR_STORAGE
is defined, even if IPv6 is disabled, unlike previous versions which tied
it to the IPv6 #define.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1864>
Grabbing a disabled (pointer) device will lead to a segfault later
in the myriad of places where we look at the device's spriteInfo - which
will be NULL.
As a workaround, disallow grabbing a disabled device by pretending it's
already grabbed. Since the point of a grab is to receive all events by
that device and disabled devices cannot send events, this should be Good
Enough.
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1856>
Currently each driver build job also builds the server. This is bad use
of resources because server build takes way more resources compared to a
driver build. Reusing already built xserver would resolve the issue.
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1806>
This ensures that the pkg-config files installed to
xserver-tarball/install will have correct paths. This is needed so that
xf86-driver-build-test will be able to reuse this installation of
xserver. It will be passed to that job via artifacts (subsequent
commits)
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1806>
In order to be able to build on Linux w/ platform_noop
(when no recent enough libdrm found), a few more dummy functions
are needed here.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1848>
Several pieces of the code, as well as drivers are using %X, which
we don't support, so leading to error messages like this:
[2025-02-27 14:28:44] BUG: 'if (f[f_idx])'
[2025-02-27 14:28:44] BUG: ../xserver/os/log.c:538 in vpnprintf()
[2025-02-27 14:28:44] Unsupported printf directive 'X'
[2025-02-27 14:28:44]
[2025-02-27 14:28:44] Backtrace:
[2025-02-27 14:28:44] unw_get_proc_name failed: no unwind info found [-10]
[2025-02-27 14:28:44] 0: /usr/lib/Xorg (?+0x0) [0x5f4d1261bc47]
[2025-02-27 14:28:44] 1: /usr/lib/Xorg (LogVHdrMessageVerb+0x10f) [0x5f4d1261ca3f]
[2025-02-27 14:28:44] 2: /usr/lib/Xorg (LogHdrMessageVerb+0x85) [0x5f4d1261cae5]
[2025-02-27 14:28:44] 3: /usr/lib/Xorg (xf86VDrvMsgVerb+0x54) [0x5f4d12636604]
[2025-02-27 14:28:44] 4: /usr/lib/Xorg (xf86DrvMsg+0x97) [0x5f4d126367d7]
[2025-02-27 14:28:44] 5: /usr/lib/Xorg (xf86PrintEDID+0x545) [0x5f4d12654315]
[2025-02-27 14:28:44] 6: /usr/lib/Xorg (xf86OutputSetEDID+0x1bd) [0x5f4d12657e0d]
In the longer run, we'll have to decide whether we actually want to
implement the upper-case directive or change all callers to lower-case.
But for now it's better to just accept %X and interpret it as lower-case,
in order to fix those error messages. Whether it's printed as upper or
lower case is more or less an aesthetic matter.
Reported-By: guido iodice <guido.iodice@gmail.com>
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1846>
Mixed up reply vs request. Obviously, the size substracted from reply
struct's one has to be the one of the generic reply, not generic requst :o
Background: the meaning of the length field isn't entirely intuitive.
a) the size is in 4-byte units, instead of bytes (therefore passing through
bytes_to_int32() call)
b) it's not the total packet size, but only the *extra* payload size, ergo:
how much is the packet longer than a xGenericReply = 8 units = 32 bytes.
(min. packet size is 32 bytes -> length = 0)
In order to prevent those kind of coding errors ever happening again, it might
be a good idea putting that into a generic macro.
Fixes: c6f1b8a735
Fixes: 0ca5aaba50
Issue: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1797
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1845>
The freeRules parameter is always set to TRUE, meaning always free the
XkbRF_RulesRec struct. Therefore also no need to clear out fields that
aren't going to be reused again, ever.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1840>
Allow the compiler to figure out the most efficient way to do the
struct initialization, and a little improvement on code readability.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1840>
The function is nothing more than a calloc() call, so we can spare
an actual function call here by making it static inline.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1840>
Bjarni Ingi Gislason
Tanguy Ortolo
Peter Hutterer
Alan Coopersmith
Povilas Kanapickas
Enrico Weigelt, metux IT consult