I introduced this error with the MST hotplug code, but it can trigger
on zaphod setups, and is perfectly fine. There is no support for
MST/hotplug on zaphod setups currently, so we can just skip over
the dynamic connector handling here. However we shouldn't skip
over the lease handling so move it into the codepath.
Fixes: 9257b1252d ("modesetting: add dynamic connector hotplug support (MST) (v3)")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1cfdd1a965)
Avoids a crash in xf86RotatePrepare -> DamageRegister during
CreateScreenResources if rotation or another transform is configured for
any connected RandR output in xorg.conf. The generic rotation/transform
code generally can't work without the root window currently.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/969
Fixes: 094f42cdfe "xfree86/modes: Call xf86RotateRedisplay from
xf86CrtcRotate"
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 6a5e47c57d)
For the miClearDrawable prototype. Apparently it doesn't get pulled in
for some build configurations, breaking the build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a24a786fc8)
Since the Solaris kernel tracks IOPL per thread, and doesn't inherit
raised IOPL levels when creating a new thread, we need to turn it on
in the input thread for input drivers like vmmouse that need register
access to work correctly.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 12769c516d)
Allows os backends to run additional code as necessary to set up the
input thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit ea1527a8a6)
Allows ddx's to run additional code as necessary to set up the
input thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 4ad21c3247)
Keeping track of kernel state in user space doesn't buy us anything,
and introduces bugs, as we were keeping global state but the Solaris
kernel tracks IOPL per thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 7533fa9bd5)
Calling rrGetScrPriv when RandR isn't initialized causes an assertion
failure that aborts the server:
Xorg: ../include/privates.h:121: dixGetPrivateAddr: Assertion `key->initialized' failed.
Thread 1 "Xorg" received signal SIGABRT, Aborted.
0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff7892897 in abort () from /usr/lib/libc.so.6
#2 0x00007ffff7892767 in __assert_fail_base.cold () from /usr/lib/libc.so.6
#3 0x00007ffff78a1526 in __assert_fail () from /usr/lib/libc.so.6
#4 0x00007ffff7fb57c1 in dixGetPrivateAddr (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:121
#5 0x00007ffff7fb5822 in dixGetPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:136
#6 0x00007ffff7fb586a in dixLookupPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:166
#7 0x00007ffff7fb8445 in CreateScreenResources (pScreen=0x555555ab1790) at ../hw/xfree86/drivers/modesetting/driver.c:1335
#8 0x000055555576c5e4 in xf86CrtcCreateScreenResources (screen=0x555555ab1790) at ../hw/xfree86/modes/xf86Crtc.c:744
#9 0x00005555555d8bb6 in dix_main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/main.c:214
#10 0x00005555557a4f0b in main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/stubmain.c:34
This can happen, for example, if the server is configured with Xinerama
and there is more than one X screen:
Section "ServerLayout"
Identifier "crash"
Screen 0 "modesetting"
Screen 1 "dummy" RightOf "modesetting"
Option "Xinerama"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "dummy"
Driver "dummy"
EndSection
Section "Screen"
Identifier "dummy"
Device "dummy"
EndSection
The problem does not reproduce if there is only one X screen because of
this code in xf86RandR12Init:
#ifdef PANORAMIX
/* XXX disable RandR when using Xinerama */
if (!noPanoramiXExtension) {
if (xf86NumScreens == 1)
noPanoramiXExtension = TRUE;
else
return TRUE;
}
#endif
Fix the problem by checking dixPrivateKeyRegistered(rrPrivKey) before
calling rrGetScrPriv. This is similar to what the xf86-video-amdgpu
driver does:
fd66f5c0be/src/amdgpu_kms.c (L388)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 4226c6d032)
The Present code sends the idle notification event to the client after
xwl_present_flush returns. If we don't flush our GPU work here, the
client may race to draw another frame to the same buffer, so we may end
up copying (parts of) that new frame instead of the one we meant to.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/835
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(Cherry picked from commit 2a2234ad1a)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes random garbage being visible intermittently.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit 9ba13bac9d)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If a new rotate buffer was allocated. This makes sure the new buffer
has valid transformed contents when it starts being displayed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit 327df450ff)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes sure any pending drawing to a new scanout buffer will be
visible from the start.
This makes the finish call in drmmode_copy_fb superfluous, so remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit c66c548eab)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We now ask Glamor to use EGL_MESA_query_driver to obtain the DRI driver
name; if successful, we use that as the DRI driver name. Following the
existing dri2.c logic, we also use the same name for the VDPAU driver,
except for i965 (and now iris), where we switch to the "va_gl" fallback.
This allows us to bypass the PCI ID lists in xserver and centralize the
driver selection mechanism inside Mesa. The hope is that we no longer
have to update these lists for any future hardware.
(backported from commit 8d4be7f6c4)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
isastream() was never more than a stub in glibc, and was removed in
glibc-2.30 by commit a0a0dc83173c ("Remove obsolete, never-implemented
XSI STREAMS declarations").
Bug: https://bugs.gentoo.org/700838
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit e6ab7f9f34)
Slightly simplifies the callers since they don't need to check for
non-NULL anymore.
I do extremely hate the workarounds here to suppress misprite taking the
cursor down though. Surely there's a better way.
[1.20: Do not in fact simplify the callers as above, since it would
change the ABI. - ajax]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit ff310903f3)
<sys/io.h> on ARM hasn't worked for a long, long time, so it was removed
it from glibc upstream.
Remove the include to avoid a compilation failure on ARM with glibc.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/840
(cherry picked from commit fe4cd0e7f5)
During startup, the xfree86 DDX's InitOutput() calls PreInit for
protocol screens first, and then GPU screens. On teardown, dix_main()
calls CloseScreen in the reverse order: GPU screens first starting with
the last one and then working backwards, and then protocol screens also
in reverse order.
InitOutput() calls ScreenInit in the wrong order: for GPU screens first and then
for protocol screens. This causes a problem for drivers that have global state
that is tied to the first screen that calls ScreenInit.
Fix this by simply re-ordering the for loops to call PreInit for
protocol screens first and then for GPU screens second.
(cherry picked from commit e5e9a8ca91)
ms_present_get_crtc() returns an RRCrtcPtr, but derives it from a xf86CrtcPtr
found via ms_dri2_crtc_covering_drawable()=>ms_covering_crtc(). As a result, it
depends on all associated DIX ScreenRecs having an xf86CrtcConfigPtr DDX
private.
Some DIX ScreenRecs don't have an xf86CrtcConfigPtr DDX private, but do have an
rrScrPrivPtr DDX private. Given that we can derive all of the information we
need from RandR, we can support these screens by avoiding the use of xf86Crtc.
This change implements an RandR-based path for ms_present_get_crtc(), allowing
drawables to successfully fall back to syncing to the primary output, even if
the slave doesn't have an xf86CrtcConfigPtr DDX private.
Without this change, if a slave doesn't have an xf86CrtcConfigPtr DDX private,
drawables will fall back to 1 FPS if they overlap an output on that slave.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 562c7888be)
DIX ScreenRecs don't necessarily have an xf86CrtcConfigPtr DDX private.
ms_covering_crtc() assumes that they do, which can result in a segfault.
Update ms_covering_crtc() to check the XF86_CRTC_CONFIG_PTR() returned pointer
before dereferencing it. This will still mean that ms_covering_crtc() can't fall
back to the primary output when a drawable overlaps a slave output (going to the
1 FPS default instead), but it won't segfault.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 797e7a0ceb)
ms_covering_crtc() uses RRFirstOutput() to determine a primary output to fall
back to if a drawable is overlapping a slave output.
If the primary output is a slave output, RRFirstOutput() will return a slave
output even if passed a master ScreenPtr. ms_covering_crtc() dereferences the
output's devPrivate, which is invalid for non-modesetting outputs, and can
crash.
Changing RRFirstOutput() could have unintended side effects for other callers,
so this change replaces the call to RRFirstOutput() with ms_first_output().
ms_first_output() ignores the primary output if it doesn't match the given
ScreenPtr, choosing the first connected output instead.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 3ef9029ace)
Define EGL_NO_X11 everywhere were we also define MESA_EGL_NO_X11_HEADERS,
EGL_NO_X11 is the MESA_EGL_NO_X11_HEADERS equivalent for the egl headers
shipped with libglvnd.
This fixes the xserver not building with the libglvnd-1.2.0 headers:
In file included from /usr/include/EGL/eglplatform.h:128,
from /usr/include/epoxy/egl_generated.h:11,
from /usr/include/epoxy/egl.h:46,
from glamor_priv.h:43,
from glamor_composite_glyphs.c:25:
/usr/include/X11/Xlib.h:222:2: error: conflicting types for 'GC'
222 | *GC;
| ^~
In file included from glamor.h:34,
from glamor_priv.h:32,
from glamor_composite_glyphs.c:25:
../include/gcstruct.h:282:3: note: previous declaration of 'GC' was here
282 | } GC;
| ^~
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 741bd73429)
The autoconf build for the modesetting driver still relied on
xorg-macros.m4 for string replacements and did not include the
top-level manpages.am. As a result, no substitutions took place after
commit 2e497bf887.
This should be a candidate for the 1.20 branch.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit de0d39f825)
This fixes 'non-desktop' displays staying powered on after their lease
has been revoked.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111620
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
If Xwayland gets to realize a window meant for composition before the
compositor redirected windows (i.e. redirect mode is not RedirectDrawManual
yet), the window would stay "invisible" as we wouldn't create a
wl_surface/wl_shell_surface for it at any later point.
This scenario may happen if the wayland compositor sets up a X11 socket
upfront, but waits to raise Xwayland until there are X11 clients. In this
case the first data on the socket is the client's, the compositor can hardly
beat that in order to redirect subwindows before the client realizes a
Window.
In order to jump across this hurdle, allow the late creation of a matching
(shell) surface for the WindowPtr on SetWindowPixmapProc, so it is ensured
to be created after the compositor set up redirection.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 78cc8b6f96)
This is just called from xwl_window_realize() ATM, but will be useful in
future commits.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
(cherry picked from commit c2e8ae9640)
This will be dissociated in future commits to handle the cases
where windows are being realized before there is a compositor
handling redirection.
In that case, we still want the DamagePtr to be registered upfront
on RealizeWindowProc before a corresponding xwl_window might be
created. Most notably, it cannot be lazily created on
SetWindowPixmapProc as damage accounting gets broken.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
(cherry picked from commit 4e50440ae2)
Both `gbm_bo_create()` and `gbm_bo_create_with_modifiers()` can fail and
return `NULL`.
If that occurs, `xwl_glamor_gbm_create_pixmap()` will not create a
pixmap for the (NULL) GBM bo, but would still try to free the bo which
leads to a crash in mesa:
[...]
#7 <signal handler called>
#8 in gbm_bo_destroy (bo=0x0) at ../src/gbm/main/gbm.c:439
#9 in xwl_glamor_gbm_create_pixmap () at xwayland-glamor-gbm.c:245
#10 in ProcCreatePixmap () at dispatch.c:1440
#11 in Dispatch () at dispatch.c:478
#12 in dix_main () at main.c:276
To avoid the crash, only free the GBM bo if not `NULL`.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1729925
(cherry picked from commit d9ec525059)
There's not really a good way to query this from the wayland server, so
just set the maximum to the X11 protocol limits. While we're at it,
lower the minimum screen size to something implausibly small too, just
in case.
Fixes: xorg/xserver#850
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit d0850241c6)
Running Xwayland non-rootless and resizing the output would lead to a
crash while trying to update the larger areas of the root window.
Make sure we resize the backing pixmap according to the new output size
to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/834
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit ce9455b5ee)
Copied from Mesa with no modifications.
This update brings in a significant number of new platform ID's.
Syncs with mesa up to commit e334a595e ("intel/icl: Add new ICL
PCI-IDs").
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a8d9ebeb43)
Hiding the tablet tool cursor results in it being hidden forever after.
This is due to the stale frame callback that will neither be disposed
or replaced. This can be reproduced in krita (X11) as the pointer
cursor is hidden while over the canvas.
Clearing the frame callback ensures the correct behavior in future
xwl_tablet_tool_set_cursor() calls (i.e. a new cursor surface being
displayed, and a new frame callback created), and is 1:1
with xwl_seat_set_cursor() for pointers.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
(cherry picked from commit dea4a74621)
The current code in `xwl_glamor_gbm_create_pixmap_for_bo()` may fail in
several cases that are not checked for:
- `eglCreateImageKHR()` may have failed to create the image,
- `glEGLImageTargetTexture2DOES()` may fail and set an error,
- `glamor_set_pixmap_texture()` may fail for very large pixmaps
because the corresponding FBO could not be created.
Trying to upload content to a pixmap with no texture will crash Mesa,
glamor and Xwayland, e.g.:
XXX fail to create fbo.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x29)
(EE) 1: libpthread.so.0 (funlockfile+0x50)
(EE) 2: libc.so.6 (__memmove_avx_unaligned_erms+0x215)
(EE) 3: dri/i965_dri.so (_mesa_format_convert+0xab3)
(EE) 4: dri/i965_dri.so (_mesa_texstore+0x205)
(EE) 5: dri/i965_dri.so (store_texsubimage+0x28c)
(EE) 6: dri/i965_dri.so (intel_upload_tex+0x13b)
(EE) 7: dri/i965_dri.so (texture_sub_image+0x134)
(EE) 8: dri/i965_dri.so (texsubimage_err+0x150)
(EE) 9: dri/i965_dri.so (_mesa_TexSubImage2D+0x48)
(EE) 10: Xwayland (glamor_upload_boxes+0x246)
(EE) 11: Xwayland (glamor_copy+0x4d1)
(EE) 12: Xwayland (miCopyRegion+0x96)
(EE) 13: Xwayland (miDoCopy+0x43c)
(EE) 14: Xwayland (glamor_copy_area+0x24)
(EE) 15: Xwayland (damageCopyArea+0xba)
(EE) 16: Xwayland (compCopyWindow+0x31c)
(EE) 17: Xwayland (damageCopyWindow+0xd3)
(EE) 18: Xwayland (miResizeWindow+0x7b7)
(EE) 19: Xwayland (compResizeWindow+0x3a)
(EE) 20: Xwayland (ConfigureWindow+0xa96)
(EE) 21: Xwayland (ProcConfigureWindow+0x7d)
(EE) 22: Xwayland (Dispatch+0x320)
(EE) 23: Xwayland (dix_main+0x366)
(EE) 24: libc.so.6 (__libc_start_main+0xf3)
(EE) 25: Xwayland (_start+0x2e)
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Check for the possible cases of failure above and fallback to the
regular glamor pixmap creation when an error is detected.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/661
(cherry picked from commit fc6380a11b)
On pointer enter notification, Xwayland checks for an existing pointer
warp with a `NULL` sprite.
In turn, `xwl_pointer_warp_emulator_maybe_lock()` checks for an existing
grab and the destination window using `XYToWindow()` which does not
check for the actual sprite not being `NULL`.
So, in some cases, when the pointer enters the surface and there is an
existing X11 grab which is not an ownerEvents grab, Xwayland would crash
trying to dereference the `NULL` sprite pointer:
#0 __GI_raise ()
#1 __GI_abort () at abort.c:79
#2 OsAbort () at utils.c:1351
#3 AbortServer () at log.c:879
#4 FatalError () at log.c:1017
#5 OsSigHandler () at osinit.c:156
#6 OsSigHandler () at osinit.c:110
#7 <signal handler called>
#8 XYToWindow (pSprite=0x0, x=0, y=0) at events.c:2880
#9 xwl_pointer_warp_emulator_maybe_lock () at xwayland-input.c:2673
#10 pointer_handle_enter () at xwayland-input.c:434
Avoid the crash by simply checking for the sprite being not `NULL` in
`xwl_pointer_warp_emulator_maybe_lock()`
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.redhat.com/1708119
(cherry picked from commit 0a07446318)
wl_drm's protocol "device" event provides the path to the DRM device,
which may not be a render node, thus causing Xwayland to fall back to
DRM authentication which may fail if the user has switched to another
VT while Xwayland is starting.
Search for a render node corresponding to the given DRM device and try
to use it instead, as render nodes do not need DRM authentication and
Xwayland can make use of them if it can find one.
Closes: https://bugs.freedesktop.org/108038
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
(Cherry picked from commit 361894497c)
xwl_present_cleanup frees the struct xwl_present_window memory,
so if there's a pending callback, we have to destroy it to prevent
use-after-free in xwl_present_sync_callback.
Should fix issue #645.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(Cherry picked from commit 2e18eec6f0)
A user of Adélie Linux reported that modesetting wasn't working properly on
their Intel i7-9700K-integrated UHD 630 GPU. Xorg.0.log showed:
[ 131.902] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x8086 / 0x3e98
[ 131.902] (EE) modeset(0): Failed to initialize the DRI2 extension.
Indeed, that PCI ID is missing from i965_pci_ids. Adding it fixed the issue
and allowed the system to work with i965_dri under modesetting.
(cherry picked from commit d3a26bbf61)
If the driver calls xf86HandleColormaps, CMapChangeGamma updates the HW
gamma LUT of all CRTCs via xf86RandR12LoadPalette. However,
xf86RandR12ChangeGamma was then clobbering the gamma LUT of the RandR
1.2 compatibility output's CRTC with the gamma curves computed from the
screen's global gamma values.
Fix this by bailing if xf86RandR12LoadPalette is installed.
Fixes: 02ff0a5d7e "xf86RandR12: Fix XF86VidModeSetGamma triggering a
BadImplementation error"
(cherry picked from commit 30044b2253)
Noticed when porting this logic to xf86-video-nouveau, and valgrind
complained about conditional jump based on uninitialized data.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
(cherry picked from commit 48b1af2718)
Believe it or not, somehow we've never done this in legacy mode! We
currently simply change the DPMS property on the CRTC's output's
respective DRM connector, but this means that we're just setting the
CRTC as inactive-not disabled. From the perspective of the kernel, this
means that any shared resources used by the CRTC are still in use.
This can cause problems for drivers that are not yet fully atomic,
despite using the atomic helpers internally. For instance: if CRTC-1 and
CRTC-2 are still enabled and use shared resources within the kernel (an
MST topology, for example), and then userspace tries to go enable CRTC-3
on the same topology this might suddenly fail if CRTC-3 needs the shared
resources CRTC-1 and CRTC-2 are using. While I don't know of any
situations in the mainline kernel that actually trigger this, future
plans for reworking the atomic check of MST drivers are absolutely
going to make this into a real issue (they already are in my WIP
branches for the kernel).
So: actually do the right thing here and disable CRTCs when they're not
going to be used anymore, even in legacy mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 7a44e8d400)
Xwayland creates and destroys the CRTC along with the Wayland outputs,
so there is possibly a case where the number of CRTC drops to 0.
However, `xwl_present_get_crtc()` always return `crtcs[0]` which is
invalid when `numCrtcs` is 0.
That leads to crash if a client queries the Present capabilities when
there is no CRTC, the backtrace looks like:
#0 raise() from libc.so
#1 abort() from libc.so
#2 OsAbort() at utils.c:1350
#3 AbortServer() at log.c:879
#4 FatalError() at log.c:1017
#5 OsSigHandler() at osinit.c:156
#6 OsSigHandler() at osinit.c:110
#7 <signal handler called>
#8 main_arena() from libc.so
#9 proc_present_query_capabilities() at present_request.c:236
#10 Dispatch() at dispatch.c:478
#11 dix_main() at main.c:276
To avoid returning an invalid pointer (`crtcs[0]`) in that case, simply
check for `numCrtcs` being 0 and return `NULL` in that case.
Thanks to Michel Dänzer <michel.daenzer@amd.com> for pointing this as a
possible cause of the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1609181
(cherry picked from commit e8295c5020)
The buffer release queue has two kinds of entries:
* Pending async flips.
* Completed flips waiting for their buffer to be released by the Wayland
compositor.
xwl_present_timer_callback neither completes async flips nor releases
buffers, so the timer isn't needed for the buffer release queue.
(cherry picked from commit e6cd1c9bde)
Fixes issue #12. Presumably the problem was that Present operations on
unmapped windows were executed immediately instead of only when reaching
the target MSC.
(cherry picked from commit f541615342)
When a window is unrealized, a pending frame callback may never be
called, which could result in repeatedly freezing until the frame timer
fires after a second.
Fixes these symptoms when switching from fullscreen to windowed mode in
sauerbraten.
(cherry picked from commit 8c9538573c)
There's no need to keep track of the window which last performed a
Present flip. This fixes crashes due to the assertion in
xwl_present_flips_stop failing. Fixes issue #10.
The damage generated by a flip only needs to be ignored once, then
xwl_window::present_flipped can be cleared. This may fix freezing in
the (hypothetical) scenario where Present flips are performed on a
window, followed by other drawing requests using the window as the
destination, but nothing triggering xwl_present_flips_stop. The damage
from the latter drawing requests would continue being ignored.
(cherry picked from commit 6b016d58d2)
Completing them from xwl_present_sync_callback had at least two issues:
* It was before the MSC was incremented in xwl_present_frame_callback,
so the MSC value in the completion event could be lower than the
target specified by the client. This could cause hangs with the Mesa
Vulkan drivers.
* It allowed clients to run at a frame-rate higher than the Wayland
compositor's frame-rate, wasting energy on generating frames which
were never displayed. This isn't expected to happen unless the client
specified PresentOptionAsync (in which case flips are still completed
from xwl_present_sync_callback, allowing higher frame-rates).
v2:
* Make xwl_present_has_events return true when there's a pending
"synchronous" flip, so those complete after at most ~1 second even if
the Wayland server doesn't send a frame event.
Bugzilla: https://bugs.freedesktop.org/106713
(cherry picked from commit ace551d8a2)
Apart from simplifying the code, this should also prevent a condition
(which might only be possible with the following fix) reported in
https://gitlab.freedesktop.org/wayland/weston/issues/115#note_52467:
1. xwl_present_timer_callback indirectly calls xwl_present_reset_timer
-> xwl_present_free_timer
2. xwl_present_timer_callback then returns a non-0 value, so DoTimer
calls TimerSet with the old xwl_present_window->frame_timer pointer
which was freed in step 1 => use after free
Calling xwl_present_reset_timer explicitly passes NULL to TimerSet if
step 1 freed xwl_present_window->frame_timer, and it will allocate a new
one.
(cherry picked from commit 5e8b9a3a56)
The function `xwl_glamor_gbm_create_pixmap()` first creates a buffer
objects and then creates the xwl_pixmap from it.
However, `xwl_glamor_gbm_create_pixmap_for_bo()` is not called if the
buffer object creation fails, and `xwl_glamor_gbm_create_pixmap()`
simply returns `glamor_create_pixmap()`.
The problem with this is that if `xwl_glamor_gbm_create_pixmap_for_bo()`
is not called then neither is `xwl_pixmap_set_private()` and further
calls to `xwl_pixmap_get()` will return NULL and cause a NULL pointer
dereference if the return value is not checked:
#0 xwl_glamor_gbm_get_wl_buffer_for_pixmap ()
at hw/xwayland/xwayland-glamor-gbm.c:248
#1 xwl_window_post_damage () at hw/xwayland/xwayland.c:697
#2 xwl_display_post_damage () at hw/xwayland/xwayland.c:759
#3 block_handler () at hw/xwayland/xwayland.c:890
#4 BlockHandler () at dix/dixutils.c:388
#5 WaitForSomething () at os/WaitFor.c:201
#6 Dispatch () at dix/dispatch.c:421
#7 dix_main () at dix/main.c:276
#8 __libc_start_main () at ../csu/libc-start.c:308
#9 _start ()
(gdb) print xwl_pixmap
$1 = (struct xwl_pixmap *) 0x0
Make sure we check for `xwl_pixmap_get()` returned value where relevant
and fail gracefully if this is the case.
See also: https://gitlab.gnome.org/GNOME/mutter/issues/340
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marco Trevisan <mail@3v1n0.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 036794bebc)
xwl_present_window->sync_callback was leaked.
The event memory was leaked if the corresponding buffer had already been
released.
(cherry picked from commit cb0de153bf)
Could cause privilege elevation and/or arbitrary files overwrite, when
the X server is running with elevated privileges (ie when Xorg is
installed with the setuid bit set and started by a non-root user).
CVE-2018-14665
Issue reported by Narendra Shinde and Red Hat.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 50c0cf885a)
Misplaced parenthesis caused us to compare the sizeof, not the readlink return
value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit bd5fe7593f)
0a9415cf apparently can tickle bugs in the GL stack where glGetString
returns NULL, presumably because the eglMakeCurrent() didn't manage to
actually install a dispatch table and you're hitting a stub function.
That's clearly not our bug, but if it happens we should at least not
crash. Notice this case and fail gently.
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit af151895f3)
Mesa started supporting GL_OES_EGL_image on llvmpipe in 17.3, after this
commit:
commit bbdeddd5fd0b797e1e281f058338b3da4d98029d
Author: Gurchetan Singh <gurchetansingh@chromium.org>
Date: Tue Aug 1 14:49:33 2017 -0700
st/dri: add drisw image extension
That's pretty cool, but it means glamor now thinks it can initialize on
llvmpipe. This is almost certainly not what anyone wants, as glamor on
llvmpipe is pretty much uniformly slower than fb.
This fixes both Xorg and Xwayland to refuse glamor in such a setup.
Xephyr is left alone, both because glamor is not the default there and
because Xephyr+glamor+llvmpipe is one of the easier ways to get xts to
exercise glamor.
The (very small) downside of this change is that you lose DRI3 support.
This wouldn't have helped you very much (since an lp glamor blit is
slower than a pixman blit), but it would eliminate the PutImage overhead
for llvmpipe's glXSwapBuffers. A future change should add DRI3 support
for the fb-only case.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 0a9415cf79)
The destination is always either on the stack or in the middle of some
struct.
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 43a0f9a5db)
The old code would not in fact validate the option value, though it
might complain about it in the log. It also didn't let you set some
legal values that the -maxclients command line option would.
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 7d689f049c)
This saves us having to make sure we clean it up.
Pointed out by coverity.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit b6c29a881e)
Xwayland's `xwl_destroy_window()` invokes `xwl_present_cleanup()`
before the common `DestroyWindow()`.
But then `DestroyWindow()` calls `present_destroy_window()` which will
possibly end up in `xwl_present_abort_vblank()` which will try to access
data that was previously freed by `xwl_present_cleanup()`:
Invalid read of size 8
at 0x434184: xwl_present_abort_vblank (xwayland-present.c:378)
by 0x53785B: present_wnmd_abort_vblank (present_wnmd.c:651)
by 0x53695A: present_free_window_vblank (present_screen.c:87)
by 0x53695A: present_destroy_window (present_screen.c:152)
by 0x42A90D: xwl_destroy_window (xwayland.c:653)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
Address 0x182abde0 is 80 bytes inside a block of size 112 free'd
at 0x4C2FDAC: free (vg_replace_malloc.c:530)
by 0x42A937: xwl_destroy_window (xwayland.c:647)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
by 0x446DA5: ProcKillClient (dispatch.c:3279)
by 0x4476AF: Dispatch (dispatch.c:479)
Block was alloc'd at
at 0x4C30B06: calloc (vg_replace_malloc.c:711)
by 0x433F46: xwl_present_window_get_priv (xwayland-present.c:54)
by 0x434228: xwl_present_get_crtc (xwayland-present.c:302)
by 0x539728: proc_present_query_capabilities (present_request.c:227)
by 0x4476AF: Dispatch (dispatch.c:479)
by 0x44B5B5: dix_main (main.c:276)
by 0x75F611A: (below main) (libc-start.c:308)
This is because `xwl_present_cleanup()` frees the memory but does not
remove it from the window's privates, and `xwl_present_abort_vblank()`
will still find it and hence try to access that freed memory...
Remove `xwl_present_window` from window's privates on cleanup so that no
other function can find and reuse that data once it's freed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1616269
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 3f31f56929)
xwl_output->randr_crtc is used in the update_screen_size() function :
==5331== Invalid read of size 4
==5331== at 0x15263D: update_screen_size (xwayland-output.c:190)
==5331== by 0x152C48: xwl_output_remove (xwayland-output.c:413)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
==5331== by 0x27574B: Dispatch (dispatch.c:421)
==5331== by 0x279945: dix_main (main.c:276)
==5331== Address 0x1aacb5f4 is 36 bytes inside a block of size 154 free'd
==5331== at 0x48369EB: free (vg_replace_malloc.c:530)
==5331== by 0x1F8AE8: RROutputDestroyResource (rroutput.c:421)
==5331== by 0x29A2AC: doFreeResource (resource.c:880)
==5331== by 0x29AE5B: FreeResource (resource.c:910)
==5331== by 0x152BE0: xwl_output_remove (xwayland-output.c:408)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== Block was alloc'd at
==5331== at 0x48357BF: malloc (vg_replace_malloc.c:299)
==5331== by 0x1F93E0: RROutputCreate (rroutput.c:83)
==5331== by 0x152A75: xwl_output_create (xwayland-output.c:361)
==5331== by 0x14BE59: registry_global (xwayland.c:764)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 53ce2ba0a1)
This prevents multiple scroll events happening for wayland compositors
which send axis values other than 10. For example, libinput will
typically return 15 for each scroll wheel step, and if a wayland
compositor sends those to xwayland without normalising them, 2 scroll
wheel steps will end up as 3 xorg scroll events. By listening for the
discrete_axis event, this will now correctly send only 2 xorg scroll
events.
The wayland protocol gurantees that there will always be an axis event
following an axis_discrete event. However, it does not gurantee that
other events (including other axis_discrete+axis pairs) will not happen
in between them. So we must keep a list of outstanding axis_discrete
events.
Signed-off-by: Scott Anderson <scott@anderso.nz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit cd285922cd)
The X will be crashed on the system with other DDX driver,
such as amdgpu.
show the log like:
randr: falling back to unsynchronized pixmap sharing
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e)
(EE) 1: /usr/lib/xorg/Xorg (0x55cb0151a000+0x1b5ce9)
(EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f1587a1d000+0x11390)
(EE)
(EE) Segmentation fault at address 0x0
(EE)
The issue is that modesetting as the master, and amdgpu as the slave.
Thus, when the master attempts to access pSlavePixPriv in ms_dirty_update(),
problems result due to the fact that it's accessing AMD's 'ppriv' using the
modesetting structure definition.
Apart from fixing crash issue, the patch fix other issue in master interface
in which driver should refer to master pixmap.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit f79e536851)
Instead of having every video driver loop over any pending leases to
free them during CloseScreen, do this up in the DIX layer by
terminating leases when a leased CRTC or Output is destroyed and
(just to make sure), also terminating leases in RRCloseScreen. The
latter should "never" get invoked as any lease should be associated
with a resource which was destroyed.
This is required as by the time the driver's CloseScreen function is
invoked, we've already freed all of the DIX randr structures and no
longer have any way to reference the leases
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
Cc: Thomas Hellstrom <thellstrom@vmware.com>
(cherry picked from commit 1ef7aed3e2)
The logical size is the size of the output in the global compositor
space. The mode width/height should be scaled as in the logical
size, but shouldn't be transformed. Thus we need to rotate back
the logical size to be able to use it as the mode width/height.
This fixes issues with pointer input on transformed outputs.
Signed-Off-By: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit ce2dde9ed0)
glamor_fds_from_pixmap() will bail out early if DRI3 is not enabled,
unfortunately Xwayland's glamor code would not set it as enabled which
would lead to blank pixmaps when using texture from pixmap.
Make sure to mark DRI3 as enabled from glamor_egl_screen_init() in
Xwayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107287
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit cdec2b3c19)
The recent rewrite of modesetting driver broke the 24bpp support.
As typically found on cirrus KMS, it leads to a blank screen, spewing
the error like:
failed to add fb -22
(EE) modeset(0): failed to set mode: Invalid argument
The culript is that the wrong bpp value of the front buffer is passed
to drmModeAddFB(). Fix it by replacing with the back buffer bpp,
drmmode->kbpp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit d625e16918)
In commit 9db2af6f75 (xfree86: Remove xf86{Map,Unmap}VidMem) we
somehow stopped exporting xf86{Read,Write}Mmio{8,16,32}. Since the
function pointer indirection was intended to support dense vs sparse and
sparse support is now gone, we can just make the functions static inline
in compiler.h and avoid all of this.
Bugzilla: https://bugs.gentoo.org/548906
Tested-by: Christopher May-Townsend <chris@maytownsend.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit 166ac294ae)
When setting DefaultDepth to 16 in the Screen section, the current
code requests a 32 bpp framebuffer, however the X-Server seems to
assumes 16 bpp.
Fixes commit 21217d0216 ("modesetting: Implement 32->24 bpp
conversion in shadow update")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
(cherry picked from commit 1c7f34e99f)
If we're using atomic modesetting, then we're also using universal
planes, and so the lease we create needs to include the plane.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit d83efc47b7)
We don't want universal_planes unless we're using atomic APIs for
modesetting, and the kernel already enables universal_planes
automatically when atomic is enabled.
If we enable universal_planes when we're not using atomic, then we
won't have selected a plane for each crtc, and this will break lease
creation which requires planes for each output when universal_planes
is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 4a11f66e46)
The DIX crtc and output structures are freed when their resources are
destroyed, which happens before CloseScreen is called. As a result, we
know these pointers are invalid and referencing them during any of the
remaining CloseScreen sequence will be bad.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: thellstrom@vmware.com
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
(cherry picked from commit c55a44a9a8)
This lets an application open a suitable DRM device and pass the file
descriptor to the mode setting driver through an X server command line
option, '-masterfd'.
There's a companion application, xlease, which creates a DRM master by
leasing an output from another X server. That is available at
git clone git://people.freedesktop.org/~keithp/xlease
v2:
Always print usage, but note that it can't be used if
setuid/gid
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 38ff29ec8e)
This really sucked to find out :(
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
(cherry picked from commit c41d4ff48f)
When support for allocating GBM BOs with modifiers was added,
glamor_fd_from_pixmap() was changed so that it would return an error if
it got a bo with modifiers set from glamor_fds_from_pixmap(). The
problem is that on systems that support BOs with modifiers,
glamor_fds_from_pixmap() will always return BOs with modifiers.
This means that glamor_fd_from_pixmap() was broken entirely, which broke
a number of other things including glamor_shareable_fd_from_pixmap(),
which meant that modesetting using multiple GPUs with the modesetting
DDX was also broken. Easy reproducer:
- Find a laptop with DRI prime that has outputs connected to the
dedicated GPU and integrated GPU
- Try to enable one display on each using the modesetting DDX
- Fail
Since there isn't a way to ask for no modifiers from
glamor_fds_from_pixmap, we create a shared _glamor_fds_from_pixmap()
function used by both glamor_fds_from_pixmap() and
glamor_fd_from_pixmap() that calls down to the appropriate
glamor_egl_fd*_from_pixmap() function.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
(cherry picked from commit 186a21c4ba)
So, this did actually work on older kernels at one point in time,
however it seems that this working was a result of some of the Linux
kernel's atomic modesetting helpers not preserving the CRTC's enabled
state in the right spots. This was fixed in:
846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2")
As a result, atomic commits which simply disassociate a DRM connector
with it's CRTC while leaving the CRTC in an enabled state aren't enough
to disable the CRTC, and result in the atomic commit failing. This
currently can cause issues with MST hotplugging where X will end up
failing to disable the MST outputs after they've left the system. A
simple reproducer:
- Start up Xorg
- Connect an MST hub with displays connected to it
- Remove the hub
- Now there should be CRTCs stuck on the orphaned MST connectors, and X
won't be able to reclaim them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit c12f1bd4b7)
drmmode_shadow_allocate() still uses drmModeAddFB() which may fail if
the format is not as expected, preventing from using a rotated output.
Change it to use the new function drmmode_bo_import() which takes care
of calling the drmModeAddFB2() API.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106715
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Tomas Pelka <tpelka@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit a85e94a50c)
The API init_wl_registry() and has_wl_interfaces() are marked as being
optional, but both GBM And EGLStream backends implement them so there is
point in keeping those optional.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 92daeb31fa)
When retrieving the Wayland buffer from a pixmap, if the buffer already
exists, the GBM backend will return that existing buffer.
However, as seen with the Present issues, if the call had previously
passed a wrong size, that buffer will remain at the wrong size for as
long as the buffer exists, which is error prone.
Considering that the width/height passed to get_wl_buffer() is always the
actual pixmap drawable size, and considering that the EGLStream backend
makes no use of the size either, there is really no point in passing the
width/height around.
Simplify the xwl_glamor_pixmap_get_wl_buffer() and EGL backends API by
removing the pixmap size, and use the drawable size instead.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 792359057b)
xwl_glamor_eglstream_init_egl() uses "EGL_IMG_context_priority"
extension, make sure it's actually available before using it.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit bdadaa25f5)
Now that we have separate backends for EGLStream and GBM, we can
explicitly check for the EGLStream backend to disable present support
in that case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 5d843f6947)
To be able to check for availability of the Wayland interfaces required
to run a given EGL backend (either GBM or EGLStream for now), we need
to have each backend structures and vfuncs in place before we enter the
Wayland registry dance.
That basically means that we should init all backends at first, connect
to the Wayland compositor and query the available interfaces and then
decide which backend is available and should be used (or none if either
the Wayland interfaces or the EGL extensions are not available).
For this purpose, hold an egl_backend struct for each backend we are to
consider prior to connect to the Wayland display so that, when we get to
query the Wayland interfaces, everything is in place for each backend to
handle the various Wayland interfaces.
Eventually, when we need to chose which EGL backend to use for glamor,
the available Wayland interfaces and EGL extensions available are all
known to Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit d7185a84b6)
Move EGL backends initialization to its own function in
xwayland-glamor.c
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 48f037a27c)
Introduces a new egl_backend function to let the EGL backend check for
the presence of the required Wayland interfaces.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit f2fcb4877e)
EGL backend availability requires both EGL extensions and Wayland
interfaces to be present, so we will need to consider multiple backends
during initialization.
As a preliminary work, move the egl_backend to its own struct so that we
can have more than one backend at any given time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit b74b0f18b8)
If using a render node, we can skip DRM authentication.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit de004eefc6)
Surely, we should fail to init GBM backend if "GL_OES_EGL_image" is
missing.
This seems to have been lost with commit 1545e2dba ("xwayland: Decouple
GBM from glamor").
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit b823b43dca)
Both xwl_glamor_init_wl_registry() and the Wayland global registry
handler use the interface id/name in that order, using name/id in the
egl_backend vfunc makes things confusing and error prone.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 78ce4aa979)
Functions such as:
xwl_glamor_egl_supports_device_probing()
xwl_glamor_egl_get_devices()
xwl_glamor_egl_device_has_egl_extensions()
Are of no use outside of EGLStream support, move them to the relevant
source file.
Similarly, the other glamor functions such as:
xwl_glamor_init()
xwl_screen_set_drm_interface()
xwl_screen_set_dmabuf_interface()
xwl_glamor_pixmap_get_wl_buffer()
xwl_glamor_init_wl_registry()
xwl_glamor_post_damage()
xwl_glamor_allow_commits()
xwl_glamor_egl_make_current()
Are useless without glamor support enabled, move those within a
a "#ifdef XWL_HAS_GLAMOR" in xwayland.h
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit f6b2109c1b)
Make xwl_output_get_xdg_output() private, it doesn't need to be
available elsewhere.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit d31a7be15e)
EGLStream requires glamor, but the opposite is not true. So if someone
passes "-eglstream" with a GPU which does not support EGLStream, we
could maybe still try GBM and be lucky.
That allows Wayland compositors to pass "-eglstream" regardless of the
actual hardware, if they want to enable EGLStream on GPU which support
it.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit e16a6da79d)
eglQueryDevicesEXT() would abort if the required extensions are not
available, meaning that enabling “-eglstream” on a non-EGLStream
capable hardware would lead to an abort().
Check that "EGL_EXT_device_base" extension is available and bail out
early if not, so we don't abort() later in eglQueryDevicesEXT().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit dbde3fec32)
The command line option "-eglstream" used to enable EGLStream support
for NVidia GPU was made available only when Xwayland was built with
EGLStream support enabled.
Wayland compositors who spawn Xwayland have no easy way to tell whether
or not Xwayland was built with EGLStream support enabled, and adding
"-eglstream" command line option to Xwayland when it wasn't built with
EGLStream support would prevent Xwayland from starting (“Unrecognized
option” error).
Make sure we support the command line option "-eglstream" regardless of
EGLStream support in Xwayland. Obviously, if Xwayland was built without
EGLStream support, this has no effect.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 06c31e782e)
Dave Airlie
Michel Dänzer
Alan Coopersmith
Aaron Plattner
Kenneth Graunke
Matt Turner
Adam Jackson
Olivier Fourdan
Alex Goins
Hans de Goede
Sven Joachim
Andres Rodriguez
Carlos Garnacho
Matt Roper
Peter Hutterer
Michel Dänzer
A. Wilcox
Maya Rashish
Ilia Mirkin
Lyude Paul
Matthieu Herrb
Lionel Landwerlin
Scott Anderson
Jim Qu
Keith Packard
emersion
Takashi Iwai
Stefan Agner