LogMessage logs only when the XLOG_VERBOSITY is >= 1, but by default
XLOG_VERBOSITY is 0.
Signed-off-by: Mariusz Ceier <mceier+freedesktop@gmail.com>
(cherry picked from commit 95539ab37b)
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
(cherry picked from commit efb3abddd4)
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
(cherry picked from commit 293cf660c9)
One general assumption in Xwayland is that the xwl_window remains the
same for all the child windows of the toplevel window.
When mapping a new X11 window, ensure_surface_for_window() checks for an
existing xwl_window by using xwl_window_get() which will just check for
the registered xwl_window for the window.
That means that a client mapping a child window of an existing window
with a xwl_window will get another different xwl_window.
If an X11 client issues a Present request on the parent window, hence
placed underneath its child window of the same size, the Wayland
compositor may not send the frame callback event for the parent's
Wayland surface which is reckoned to be not visible, obscured behind
the other Wayland surface for the child X11 window.
That bug affects some games running in wine which may get 1 fps because
the repaint occurs only on timeout with a long interval (as with, e.g.
https://bugs.winehq.org/show_bug.cgi?id=47066)
Fix ensure_surface_for_window() by using xwl_window_from_window() which
will walk the window tree, so that a child window won't get another
xwl_window than its parent.
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1099
See-also: https://bugs.winehq.org/show_bug.cgi?id=47066
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 606ba7fc51)
When running non-rootless, Xwayland requires that the Wayland compositor
supports the wl_shell protocol.
Check for wl_shell protocol support at startup and exit cleanly if
missing rather than segfaulting later in ensure_surface_for_window()
while trying to use wl_shell_get_shell_surface().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
(cherry picked from commit ffd02d9b26)
The EGLStream backend keeps a queue of pending streams for each Xwayland
window.
However, when this pending queue is freed, the corresponding private
data may not be cleared (typically if the pixmap for this window has
changed before the compositor finished attaching the consumer for the
window's pixmap's original eglstream), leading to a use-after-free and a
crash when trying to use that data as the window pixmap.
Make sure to clear the private data when the pending stream is freed.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1055
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Karol Szuster <karolsz9898@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit a5f439dcd2)
Major/minor numbers are a.. major (ha) source of pain in FreeBSD porting.
In this case, Xwayland was thinking that /dev/dri/card0 is already a render node,
because the st_rdev on FreeBSD was passing the Linux-style check,
and because of the assumption, acceleration would fail because
various ioctls like AMDGPU_INFO would be denied on the non-render node.
Switch to libdrm's function that already works correctly on all platforms.
Signed-off-by: Greg V <greg@unrelenting.technology>
Reviewed-by: Emmanuel Vadot <manu@FreeBSD.org>
(cherry picked from commit 239ebdc9e4)
Currently, when a X11 client (usually the X11 window manager from a
Wayland compositor) changes the value of the X11 property
`_XWAYLAND_ALLOW_COMMITS` from `false` to `true`, all pending frame
callbacks on the window are discarded so that the commit occurs
immediately.
Weston uses that mechanism to prevent the content of the window from
showing before it's ready when mapping the window initially, but
discarding the pending frame callbacks has no effect on the initial
mapping of the X11 window since at that point there cannot be any frame
callback on a surface which hasn't been committed yet anyway.
However, discarding pending frame callbacks can be problematic if we
were to use the same `_XWAYLAND_ALLOW_COMMITS` mechanism to prevent
damages to be posted before the X11 toplevel is updated completely
(including the window decorations from the X11 window manager).
Remove the portion of code discarding the pending frame callback,
Xwayland should always wait for a pending frame callback if there's one
before posting new damages.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/333
(cherry picked from commit 66da95a172)
We can only flip if the window pixmap matches that of the toplevel
window. Doing so regardless could cause the toplevel window pixmap to
get destroyed while it was still referenced by the window, resulting in
use-after-free and likely a crash.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1033
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
(cherry picked from commit 4c25356d6c)
At the point where xf86BusProbe runs we haven't yet taken our own VT,
which means we can't perform drm "master" operations on the device. This
is tragic, because we need master to fish the bus id string out of the
kernel, which we can only do after drmSetInterfaceVersion, which for
some reason stores that string on the device not the file handle and
thus needs master access.
Fortunately we know the format of the busid string, and it happens to
almost be the same as the ID_PATH variable from udev. Use that instead
and stop calling drmSetInterfaceVersion.
(backported from commit 0816e8fca6)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 6a79a737e2)
This couldn't have worked correctly for non-0 x1/y1.
Noticed by inspection.
Reviewed-by: Simon Ser <contact@emersion.fr>
(cherry picked from commits 9141196d31)
(cherry picked fixup from commit 85a6fd11c7)
The way Xwayland works (like all Wayland clients), it first queries the
Wayland registry, set up all relevant protocols and then initializes its
own structures.
That means Xwayland will get the Wayland outputs from the Wayland
compositor, compute the physical size of the combined outputs and set
the corresponding Xwayland screen properties accordingly.
Then it creates the X11 screen using fbScreenInit() but does so by using
a default DPI value of 96. That value is used to set the physical size
of the X11 screen, hence overriding the value computed from the actual
physical size provided by the Wayland compositor.
As a result, the DPI computed by tools such as xdpyinfo will always be
96 regardless of the actual screen size and resolution.
However, if the Wayland outputs get reconfigured, or new outputs added,
or existing outputs removed, Xwayland will recompute and update the
physical size of the screen, leading to an unexpected change of DPI.
To avoid that discrepancy, use a fixed size DPI (defaults to 96, and can
be set using the standard command lime option "-dpi") and compute a
physical screen size to match that DPI setting.
Note that only affects legacy core protocols, X11 clients can still get
the actual physical output size as reported by the Wayland compositor
using the RandR protocol, which also allows for the size to be 0 if the
size is unknown or meaningless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/731
(cherry picked from commit b0413b6e99)
Previously, linux-dmabuf was used unconditionally if the buffer had a
modifier. However creating a linux-dmabuf buffer with a format/modifier
which hasn't been advertised will fail.
Change xwl_glamor_gbm_get_wl_buffer_for_pixmap to use linux-dmabuf when
the format/modifier has been advertised only.
Signed-off-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1035
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit c0e13cbf5a)
During a VT-Switch a raw pointer to the shared cursor object
is saved which is then freed (in case of low refcount) by a call to
xf86CursorSetCursor with argument pCurs = NullCursor.
This leads to a dangling pointer which can follow in a use after free.
This fix ensures that there is a shared handle saved for the VT-Switch cycle.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 7ae221ad57)
Mostly http->https conversions, but also replaces gitweb.fd.o
with gitlab.fd.o, and xquartz.macosforge.org with xquartz.org.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit a5151f58cf)
Xwayland is just a Wayland client, no X11 screensaver should be
expected to work reliably on Xwayland when running rootless because
Xwayland cannot grab the input devices so it has no way to actually
lock the screen managed by the Wayland compositor.
Turn off the screensaver on Xwayland when running rootless by setting
the screensaver timeout and interval and their default values to zero
and disable the MIT-SCREEN-SAVER extension.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1051
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 5c20e4b834)
In the log of the commit below, I claimed this wasn't necessary on the
1.20 branch, but this turned out to be wrong: It meant that
event->buffer could already be destroyed in xwl_present_free_event,
resulting in use-after-free and likely a crash.
Fixes: 22c0808ac8 "xwayland: Free all remaining events in
xwl_present_cleanup"
Since the introduction of "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize" the fb_id isn't initialited at
drmmode_xf86crtc_resize.
Rotate operation of XRandR uses rotate_bo. So in this case the fb_id
associated to the front_bo is not initialized at drmmode_set_mode_major.
So fd_id remains 0.
As every call to drmmode_xf86crtc_resize allocates a new front_bo we should
destroy unconditionally the old_front_bo if operation success. So we free
the allocated GBM handles.
This avoids crashing xserver with a OOM in the RPI4 1Gb at 4k resolution
after 3 series xrandr rotations from normal to left and vice versa reported at
https://github.com/raspberrypi/firmware/issues/1345
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1024
Fixes: 8774532121 "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize"
(cherry picked from commit 73480f172a)
When a slave device causes the master virtual pointer device to change
device types, the device's private data pointer
(device->public.devicePrivate) is also changed to match the type of the
slave device. This can be a problem though, as tablet pad devices will
set the device's private data pointer to their own xwl_tablet_pad
struct. This can cause us to dereference the pointer as the wrong type,
and result in a segfault:
Thread 1 "Xwayland" received signal SIGSEGV, Segmentation fault.
wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at src/wayland-client.c:792
792 va_start(ap, opcode);
(gdb) bt
0 wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at
src/wayland-client.c:792
1 0x00005610b27b6c55 in wl_pointer_set_cursor (hotspot_y=0,
hotspot_x=0, surface=0x0, serial=<optimized out>, wl_pointer=<optimized
out>) at /usr/include/wayland-client-protocol.h:4610
2 xwl_seat_set_cursor (xwl_seat=xwl_seat@entry=0x5610b46d5d10) at
xwayland-cursor.c:137
3 0x00005610b27b6ecd in xwl_set_cursor (device=<optimized out>,
screen=<optimized out>, cursor=<optimized out>, x=<optimized out>,
y=<optimized out>) at xwayland-cursor.c:249
4 0x00005610b2800b46 in miPointerUpdateSprite (pDev=0x5610b4501a30) at
mipointer.c:468
5 miPointerUpdateSprite (pDev=0x5610b4501a30) at mipointer.c:410
6 0x00005610b2800e56 in miPointerDisplayCursor (pCursor=0x5610b4b35740,
pScreen=0x5610b3d54410, pDev=0x5610b4501a30) at mipointer.c:206
7 miPointerDisplayCursor (pDev=0x5610b4501a30, pScreen=0x5610b3d54410,
pCursor=0x5610b4b35740) at mipointer.c:194
8 0x00005610b27ed62b in CursorDisplayCursor (pDev=<optimized out>,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at cursor.c:168
9 0x00005610b28773ee in AnimCurDisplayCursor (pDev=0x5610b4501a30,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at animcur.c:197
10 0x00005610b28eb4ca in ChangeToCursor (pDev=0x5610b4501a30,
cursor=0x5610b4b35740) at events.c:938
11 0x00005610b28ec99f in WindowHasNewCursor
(pWin=pWin@entry=0x5610b4b2e0c0) at events.c:3362
12 0x00005610b291102d in ChangeWindowAttributes (pWin=0x5610b4b2e0c0,
vmask=<optimized out>, vlist=vlist@entry=0x5610b4c41dcc,
client=client@entry=0x5610b4b2c900) at window.c:1561
13 0x00005610b28db8e3 in ProcChangeWindowAttributes (client=0x5610b4b2c900)
at dispatch.c:746
14 0x00005610b28e1e5b in Dispatch () at dispatch.c:497
15 0x00005610b28e5f34 in dix_main (argc=16, argv=0x7ffc7a601b68,
envp=<optimized out>) at main.c:276
16 0x00007f8828cde042 in __libc_start_main (main=0x5610b27ae930 <main>,
argc=16, argv=0x7ffc7a601b68, init=<optimized out>, fini=<optimized
out>, rtld_fini=<optimized out>, stack_end=0x7ffc7a601b58) at
../csu/libc-start.c:308
17 0x00005610b27ae96e in _start () at cursor.c:1064
Simple reproducer in gnome-shell: open up an Xwayland window, press some
tablet buttons, lock and unlock the screen. Repeat if it doesn't crash
the first time.
So, let's fix this by registering our own device-specific private key
for storing a backpointer to xwl_tablet_pad, so that all input devices
have their private data pointers set to their respective xwl_seat.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit ba0e789b91)
ProcVidModeGetGamma() relies on GetGamma() to initialise values if it
returns TRUE. Without this, we're sending uninitialised values to
clients.
Fixes: xorg/xserver#1040
(cherry picked from commit 6748a40941)
When running with a weston session without a pointer device (thus with
the wl_seat not having a pointer) xwayland pointer warping and pointer
confining should simply be ignored to avoid crashes.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
(cherry picked from commit d35f68336b)
Xwayland uses the device private to point to the `xwl_seat`.
Device may be removed at any time, including on suspend.
On resume, if the DIX code ends up calling a function that requires the
`xwl_seat` such as `xwl_set_cursor()` we may end up pointing at random
data.
Make sure the clear the device private data on removal so that we don't
try to use it and crash later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
https://gitlab.freedesktop.org/xorg/xserver/issues/709
(cherry picked from commit 4195e80356)
At the end of xwl_present_cleanup, these events aren't reachable
anymore, so if we don't free them first, they're leaked.
(cherry picked from commit 64565ea344fef0171497952ef75f019cb420fe3b)
v2:
* Simpler backport, no need to keep a reference to the pixmap on the
1.20 branch.
Minor cleanup, and will make the next change simpler. No functional
change intended.
Reviewed-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1beffba699)
Drop GBM_BO_USE_SCANOUT from the GBM_BO_IMPORT_FD import, add
GBM_BO_USE_RENDERING to the GBM_BO_IMPORT_FD_MODIFIER import.
If the DMA-BUF cannot be scanned out, gbm_bo_import with
GBM_BO_USE_SCANOUT will fail. However Xwayland doesn't need to scan-out
the buffer and can work fine without scanout. Glamor only needs
GBM_BO_USE_RENDERING.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
(cherry picked from commit 421ce458f1)
Mutter recently added headless tests, and when running those tests the
Wayland compositor runs for a very short time.
Xwayland is spawned by the Wayland compositor and upon startup will
query the various Wayland protocol supported by the compositor.
To do so, it will do a roundtrip to the Wayland server waiting for
events it expects.
If the Wayland compositor terminates before Xwayland has got the replies
it expects, it will loop indefinitely calling `wl_display_roundtrip()`
continuously.
To avoid that issue, add a new `xwl_screen_roundtrip()` that checks for
the returned value from `wl_display_roundtrip()` and fails if it is
negative.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
(cherry picked from commit 785e59060c)
The miPointerSpriteFunc swcursor code expects there to only be a single
framebuffer and when the cursor moves it will undo the damage of the
previous draw, potentially overwriting what ever is there in a new
framebuffer installed after a flip.
This leads to all kind of artifacts, so we need to disable pageflipping
when a swcursor is used.
The code for this has shamelessly been copied from the xf86-video-amdgpu
code.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/issues/828
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0aaac8d783)
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@displaylink.com>
../hw/xfree86/os-support/stub/stub_init.c: In function ‘xf86OSInputThreadInit’:
../hw/xfree86/os-support/stub/stub_init.c:29:1: warning: old-style function definition [-Wold-style-definition]
(cherry picked from commit 7c266cafed)
We were only calling xwl_present_unrealize_window for the toplevel
window, but the list can contain entries from child windows as well,
in which case we were leaving dangling pointers to freed memory.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/1000
Fixes: c5067feaee "xwayland: Use single frame callback for Present
flips and normal updates"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 5e91587302)
The compositor may send DRM_FORMAT_MOD_INVALID instead of a list of
modifiers for various reasons. Handle this gracefully by ignoring it.
Without this, if a compositor would send DRM_FORMAT_MOD_INVALID, it'd
result in empty windows provided by Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit edf964434e)
Instead of only the fallback timer.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/854
v2:
* Drop unused frame_callback member of struct xwl_present_window
(Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit 9b31358c52)
Using a list of Present windows that need to be called back.
This prepares for the following change, there should be no change in
observed behaviour.
v2:
* Use xwl_window_create_frame_callback instead of making the
frame_listener struct non-static (Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit c5067feaee)
This will be used by the following changes. No functional change
intended.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
(cherry picked from commit f80eea0529)
When a pixmap is created with a backing FBO, the FBO should be cleared
to avoid rendering uninitialized memory. This could happen when the
pixmap is rendered without being filled in its entirety.
One example is when a top-level window without a background is
resized. The pixmap would be reallocated to prepare for more pixels,
but uninitialized memory would be rendered in the resize offset until
the client sends a frame that fills these additional pixels.
Another example is when a new top-level window is created without a
background. Uninitialized memory would be rendered after the pixmap is
allocated and before the client sends its first frame.
This issue is only apparent in OpenGL implementations that don't zero
the VRAM of allocated buffers by default, such as RadeonSI.
Signed-off-by: Dor Askayo <dor.askayo@gmail.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/636
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 0e9a0c203c)
[ Michel Dänzer:
* Squashed in commit ebf549db2d
* Dropped code related to glamor_format, which only exists on master ]
In between the two phases introduced by the previous change. This makes
sure all pending drawing to the new buffers is flushed before they're
committed to the Wayland server.
(cherry picked from commit a542224ea2)
The first phase sets the new surface properties for all damaged
windows, then the second phase commits all surface updates.
This is preparatory for the next change, there should be no observable
change in behaviour (other than the order of Wayland protocol
requests).
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit f88d9b1f77)
The atomic driver has issues with modesetting when stealing
connectors from a different crtc, a black screen when doing rotation
on a different crtc, and in general is just a mapping of the legacy
helpers to atomic. This is already done in the kernel, so just
fallback to legacy by default until this is fixed.
Please backport to 1.20, as we don't want to enable it for everyone
there. It breaks for existing users.
The fixes to make the xserver more atomic have been pending on the
mailing list for ages.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110375
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110030
References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/36/commits
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit f0d78b47ac)
Jeremy Huddleston Sequoia
Jim DeLaHunt
Christopher Chavez
Jon Turney
Mariusz Ceier
Kishore Kadiyala
Martin Peres
Olivier Fourdan
Greg V
Michel Dänzer
Adam Jackson
Aaron Ma
Simon Ser
Martin Weber
Alan Coopersmith
Jose Maria Casanova Crespo
Lyude Paul
SimonP
Sjoerd Simons
Hans de Goede
Jonas Ådahl
David Seifert
Dor Askayo
Maarten Lankhorst