Useless as an XVideo implementation with zero adaptors might be, it's
apparently a thing in the wild. Catch this case and bail out of xv init
if it happens.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
dropped the providing of a pScrn->ChangeGamma callback from the xf86RandR12
code. Leaving pScrn->ChangeGamma NULL in most cases.
This triggers the BadImplementation error in xf86ChangeGamma() :
if (pScrn->ChangeGamma)
return (*pScrn->ChangeGamma) (pScrn, gamma);
return BadImplementation;
Which causes X-apps using XF86VidModeSetGamma to crash with a
X protocol error.
This commit fixes this by re-introducing the xf86RandR12ChangeGamma
helper removed by the commit and adjusting it to work with the new
combined palette / gamma code.
Fixes: b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is a preparation patch to allow easier usage of init_one_component
outside of xf86RandR12CrtcInitGamma.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
When using secondary GPU outputs the primary GPU's blockhandler
will copy changes from its framebuffer to a pixmap shared with the
secondary GPU.
In reverse prime setups the secondary GPU's blockhandler will do another
copy from the shared pixmap to its own framebuffer.
Before this commit, if the primary GPU's blockhandler would run after
the secondary GPU's blockhandler and no events were pending, then the
secondary GPU's blockhandler would not run until some events came in
(WaitForSomething() would block in the poll call), resulting in the
secondary GPU output sometimes showing stale contents (e.g. a just closed
window) for easily up to 10 seconds.
This commit fixes this by setting the timeout passed into the
blockhandler to 0 if any shared pixmaps were updated by the primary GPU,
forcing an immediate re-run of all blockhandlers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When using reverse prime we do 2 copies, 1 from the primary GPU's
framebuffer to a shared pixmap and 1 from the shared pixmap to the
secondary GPU's framebuffer.
This means that on the primary GPU side the copy MUST be finished,
before we start the second copy (before the secondary GPU's driver
starts processing the damage on the shared pixmap).
This fixes secondary outputs sometimes showning (some) old fb contents,
because of the 2 copies racing with each other, for an example of
what this looks like see:
https://fedorapeople.org/~jwrdegoede/IMG_20160915_130555.jpg
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In Xwayland's xwl_unrealize_cursor(), the x_cursor is cleared up only
when a device value is provided to the UnrealizeCursor() routine, but
if the device is NULL as called from FreeCursor(), the corresponding
x_cursor for the xwl_seat is left untouched.
This might cause a segfault when trying to access the unrealized
cursor's devPrivates in xwl_seat_set_cursor().
A possible occurrence of this is the client changing the cursor, the
Xserver calling FreeCursor() which does UnrealizeCursor() and then
the Wayland server sending a pointer enter event, which invokes
xwl_seat_set_cursor() while the seat's x_cursor has just been
unrealized.
To avoid this, walk through all the xwl_seats and clear up all x_cursor
matching the cursor being unrealized.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
wl_display_flush() can fail with EAGAIN and Xwayland would make this a
fatal error.
When this happens, it means that Xwayland has flooded the Wayland file
descriptor, either because the Wayland compositor cannot cope or more
likely because of a deadlock situation where the Wayland compositor is
blocking, waiting for an X reply while Xwayland tries to write data to
the Wayland file descriptor.
The general consensus to avoid the deadlock is for the Wayland
compositor to never issue blocking X11 roundtrips, but in practice
blocking rountrips can occur in various places, including Xlib calls
themselves so this is not always achievable without major surgery in the
Wayland compositor/Window manager.
What this patch does is to avoid dispatching to the Wayland file
descriptor until it becomes available for writing again, while at the
same time continue processing X11 requests to release the deadlock.
This is not perfect, as there is still the possibility of another X
client hammering the connection and we'll still fail writing to the
Wayland connection eventually, but this improves things enough to avoid
a 100% repeatable crash with vlc and gtkperf.
Also, it is worth considering that window managers and Wayland
compositors such as mutter already have a higher priority than other
regular X clients thanks to XSyncSetPriority(), mitigating the risk.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1278159
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=763400
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Keeping the shm fd open beyond pixmap creation means we can easily
reach the open file descriptor limit if an X client asks us to create
that many pixmaps. Instead, let's get the wl_buffer immediatly so that
we can destroy the shm pool and close the fd before being asked to
create more.
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This speeds up headless testing of Xephyr -glamor with softpipe from
"a test per minute or so" to "a test every few seconds".
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This code is safe. If the data race fails, the result is that we take the
lock and recheck.
==================
WARNING: ThreadSanitizer: data race (pid=31401)
Read of size 1 at 0x00010f5d2500 by thread T11:
#0 wait_for_mieq_init darwinEvents.c:102 (X11.bin+0x00010003155a)
#1 -[X11Application(Private) sendX11NSEvent:] X11Application.m:1330 (X11.bin+0x00010001d652)
#2 __28-[X11Application sendEvent:]_block_invoke X11Application.m:476 (X11.bin+0x00010001887f)
#3 __tsan::invoke_and_release_block(void*) <null>:144 (libclang_rt.tsan_osx_dynamic.dylib+0x00000005d97b)
#4 _dispatch_client_callout <null>:33 (libdispatch.dylib+0x0000000020ef)
Previous write of size 1 at 0x00010f5d2500 by thread T8:
[failed to restore the stack]
Location is global 'mieqInitialized' at 0x00010f5d2500 (X11.bin+0x000100599500)
Thread T11 (tid=4367138, running) created by thread T-1
[failed to restore the stack]
Thread T8 (tid=4367130, running) created by main thread at:
#0 pthread_create <null>:144 (libclang_rt.tsan_osx_dynamic.dylib+0x000000024490)
#1 create_thread quartzStartup.c:78 (X11.bin+0x000100039d2d)
#2 QuartzInitServer quartzStartup.c:95 (X11.bin+0x000100039b96)
#3 X11ApplicationMain X11Application.m:1238 (X11.bin+0x00010001cd54)
#4 X11ControllerMain X11Controller.m:984 (X11.bin+0x00010002a5b2)
#5 server_main quartzStartup.c:136 (X11.bin+0x000100039fbb)
#6 do_start_x11_server bundle-main.c:436 (X11.bin+0x000100002e25)
#7 _Xstart_x11_server mach_startupServer.c:189 (X11.bin+0x000100004e09)
#8 mach_startup_server mach_startupServer.c:399 (X11.bin+0x0001000056a4)
#9 mach_msg_server mach_msg.c:563 (libsystem_kernel.dylib+0x000000012186)
#10 start <null>:29 (libdyld.dylib+0x000000005254)
SUMMARY: ThreadSanitizer: data race darwinEvents.c:102 in wait_for_mieq_init
==================
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This allows us to remove darwinEvents_lock() and darwinEvents_unlock()
and remove the serverRunning hack from dix
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
AppKit handles crashes on app launch with their own dialog now, so we shouldn't need to do this ourselves.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Fixes XRRGetOutputPrimary and xrandr not reporting a primary output after
startup. This was especially confusing when an output was explicitly
marked as primary using Option "Primary" in Section "Monitor".
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Move ms_flush_drm_events out of GLAMOR ifdef.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97586
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If windowsdriproto headers are available, build a Windows-DRI extension,
which supports requests to enable local clients to directly render GL to a
Windows drawable:
- a query to check if WGL is being used on a screen
- a query to map a fbconfigID to a native pixelformatindex
- a query to map a drawable to a native handle
Windows-DRI can only be useful if we are using WGL, so make an note if WGL
is active on a screen.
Make validGlxDrawable() public
Adjust glxWinSetPixelFormat() so it doesn't require a context, just a
screen and config.
That enables factoring out the deferred drawable creation code as
glxWinDeferredCreateDrawable()
Enhance glxWinDeferredCreateDrawable(), so that pixmaps are placed into a
file mapping, so they exist in memory which can be shared with the direct
rendering process.
Currently, this file mapping is accessed by a name generated from the XID.
This will not be unique across multiple server instances. It would perhaps
be better, although more complicated, to use an anonymous file mapping, and
then duplicate the handle for the direct rendering process.
Use glxWinDeferredCreateDrawable() to ensure the native handle exists for
the Windows-DRI query to map a drawable to native handle.
v2:
Various printf format warning fixes
v3:
Fix format warnings on x86
Move some uninteresting windows-dri output to debug log level
v4:
check for windowsdriproto when --enable-windowsdri
use windowsdriproto_CFLAGS
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The issue was that we set a flag to ignore the k key's up event when sent
the cmd-h down event, but because the cmd-h keycode hides XQuartz, we
became !_x_active by the time the event is delivered which caused us to
go down a differnet codepath rather than getting a chance to ignore it.
We then incorrectly ignored the next h up key.
https://bugs.freedesktop.org/show_bug.cgi?id=92648
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This fixes glxgears running at 1 fps when fully covering a slave-output
and the modesetting driver is used for the master gpu.
Reported-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
99% of the code in ms_covering_crtc is video-driver agnostic. Add a
screen_is_ms parameter when when FALSE skips the one ms specific check,
this will allow calling ms_covering_crtc on slave GPUs.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement the CreateBuffer2 / DestroyBuffer2 / CopyRegion2 DRI2InfoRec
version 9 callbacks, this is necessary for being an offload source
provider with DRI2.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If a frontbuffer drawable already has a pixmap, make sure it was created
on the right screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently with PRIME if we detect a secondary GPU,
we switch to using SW cursors, this isn't optimal,
esp for the intel/nvidia combinations, we have
no choice for the USB offload devices.
This patch checks on each slave screen if hw
cursors are enabled, and also calls set cursor
and move cursor on all screens.
Cc: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
When a slave-output is rotated the transformation is done on the blit
from master to slave GPU, so crtc->transform_in_use is not set, but we
still need to adjust the mouse position for things to work.
This commit modifies xf86_crtc_transform_cursor_position to not rely
on crtc->f_framebuffer_to_crtc, so that it can be used with GPU screens
too and always calls it for crtcs with any form of rotation.
Note not using crtc->f_framebuffer_to_crtc means that crtc->transform
will not be taken into account, that is ok, because when we've a transform
active hw-cursors are not used and xf86_crtc_transform_cursor_position
will never get called.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
xf86_crtc_rotate_coord should be the exact inverse operation of
xf86_crtc_rotate_coord_back, but when calculating x / y for 90 / 270
degrees rotation it was using height to calculate x / width to calculate y,
instead of the otherway around.
This was likely not noticed before since xf86_crtc_rotate_coord
until now was only used with cursor_info->MaxWidth and
cursor_info->MaxHeight, which are usally the same.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The CurrentCursor is always attached to the master GPU.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The "if (pixmap) ..." block this commit removes is inside an
"if (pixmap == NULL) ..." block, so it will never execute.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Remove unused arguments from ms_covering_crtc, make it static as it is
only used in vblank.c.
While at it also change its first argument from a ScrnInfoPtr to a
ScreenPtr, this makes the next patch in this patch-set cleaner.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
glamor_fd_from_pixmap() may return a tiled bo, which is not suitable
for sharing with another GPU as tiling usually is GPU specific.
Switch to glamor_shareable_fd_from_pixmap(), which always returns a
linear bo. This fixes mis-rendering when running the mode setting
driver on the master gpu in a dual-gpu setup and running an opengl
app with DRI_PRIME=1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
>From the GLX spec:
"GLX_X_RENDERABLE is a boolean indicating whether X can be used to
render into a drawable created with the GLXFBConfig. This attribute
is True if the GLXFBConfig supports GLX windows and/or pixmaps."
Every backend was setting this to true unconditionally, and then the
core ignored that value and sent true unconditionally on its own. This
is broken for ARB_fbconfig_float and EXT_fbconfig_packed_float, which
only apply to pbuffers, which are not renderable from non-GLX APIs.
Instead compute GLX_X_RENDERABLE from the supported drawable types. The
dri backends were getting _that_ wrong too, so fix that as well.
This is not a functional change, as there are no mesa drivers that claim
to support __DRI_ATTRIB_{UNSIGNED_,}FLOAT_BIT yet.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Since xwayland's initial commit we have had a check to not process
wayland modifier events while one of our surfaces has keyboard focus
since the normal xkb event processing keeps our internal modifier
state up to date and if we use the modifiers we get from the
compositor we mess up that state.
This was slightly changed in commit
10e9116b3f to allow the xkb group to be
set from the wayland event while we have focus in case the compositor
triggers a group switch.
There's a better solution to the original problem though. Processing
queued events before overriding the xkb state with the compositor's
allows those events to be sent properly modified to X clients while
any further events will be modified with the wayland modifiers as
intended.
This allows us to fully take in the wayland modifiers, including
depressed ones, which fixes an issue where we wouldn't be aware of
already pressed modifiers on enter.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The common page flip handle framework can be shared with DRI2
page flip.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When Xorg gets started directly from a wayland-gdm the crtc still has the
wayland hw cursor set. Combine this with Xorg immediately falling back to
a sw cursor because a slave-output has a monitor attached at startup; and
we end up with the wayland hardware cursor overlay fixed in its last
position + the Xorg sw cursor resulting in 2 cursors.
This commit fixes this by hiding any left-over cursors when initializing
the crtc.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The modesetting driver may be driving 2 screens (slave and master
gpu), which may have different behavior wrt hardware cursor support.
So stop using static variables and instead store the hw-cursor support
related data in a per screen struct. While at it actually make it per
crtc data as in theory different crtc's could have different hw-cursor
support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
We're happily printing the error to stdout but not which module caused it...
That's in the Xorg.log but that's at least one click away.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Emitting a LeaveNotify event every time the pointer leaves an X11 window
may confuse focus follow mouse mode in window managers such as
mutter/gnome-shell.
Keep the previously found X window and compare against the new one, and
if they match then it means the pointer has left an Xwayland window for
a native Wayland surface, only in this case fake the crossing to the
root window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xorg -configure relies on the bus implementation, e.g.
xf86pciBus.c to call xf86AddBusDeviceToConfigure(). The new
xf86platformBus code does not have support for this.
Almost all drivers support both the xf86platformBus and xf86pciBus
nowadays, and the generic xf86Bus xf86CallDriverProbe() function
prefers the new xf86platformBus probe method when available.
Since the platformBus paths do not call xf86AddBusDeviceToConfigure()
this results in Xorg -configure failing with the following error:
"No devices to configure. Configuration failed.".
Adding support for the xf86Configure code to xf86platformBus.c
is non trivial and since we advise users to normally run without
any Xorg.conf at all not worth the trouble.
However some users still want to use Xorg -configure to generate a
template config file, this commit implements a minimal fix to make
things work again for PCI devices by skipping the platform
probe method when xf86DoConfigure is set.
This has been tested on a system with integrated intel graphics,
with both the intel and modesetting drivers and restores Xorg -configure
functionality on both cases.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Without this a change in eg Xext/ wouldn't relink Xwayland, making you
wonder why your changes didn't have any effect.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
At shutdown, the Xserver will free all its resources which includes the
RRCrtc and RROutput created.
Xwayland would do the same in its xwl_output_destroy() called from
xwl_close_screen(), leading to a double free of existing RRCrtc
RROutput:
Invalid read of size 4
at 0x4CDA10: RRCrtcDestroy (rrcrtc.c:689)
by 0x426E75: xwl_output_destroy (xwayland-output.c:301)
by 0x424144: xwl_close_screen (xwayland.c:117)
by 0x460E17: CursorCloseScreen (cursor.c:187)
by 0x4EB5A3: AnimCurCloseScreen (animcur.c:106)
by 0x4EF431: present_close_screen (present_screen.c:64)
by 0x556D40: dix_main (main.c:354)
by 0x6F0D290: (below main) (in /usr/lib/libc-2.24.so)
Address 0xbb1fc30 is 0 bytes inside a block of size 728 free'd
at 0x4C2BDB0: free (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4CCE5F: RRCrtcDestroyResource (rrcrtc.c:719)
by 0x577541: doFreeResource (resource.c:895)
by 0x5787B5: FreeClientResources (resource.c:1161)
by 0x578862: FreeAllResources (resource.c:1176)
by 0x556C54: dix_main (main.c:323)
by 0x6F0D290: (below main) (in /usr/lib/libc-2.24.so)
Block was alloc'd at
at 0x4C2CA6A: calloc (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4CC6DB: RRCrtcCreate (rrcrtc.c:76)
by 0x426D1C: xwl_output_create (xwayland-output.c:264)
by 0x4232EC: registry_global (xwayland.c:431)
by 0x76CB1C7: ffi_call_unix64 (in /usr/lib/libffi.so.6.0.4)
by 0x76CAC29: ffi_call (in /usr/lib/libffi.so.6.0.4)
by 0x556CEFD: wl_closure_invoke (connection.c:935)
by 0x5569CBF: dispatch_event.isra.4 (wayland-client.c:1310)
by 0x556AF13: dispatch_queue (wayland-client.c:1456)
by 0x556AF13: wl_display_dispatch_queue_pending
(wayland-client.c:1698)
by 0x556B33A: wl_display_roundtrip_queue (wayland-client.c:1121)
by 0x42371C: xwl_screen_init (xwayland.c:631)
by 0x552F60: AddScreen (dispatch.c:3864)
And:
Invalid read of size 4
at 0x522890: RROutputDestroy (rroutput.c:348)
by 0x42684E: xwl_output_destroy (xwayland-output.c:302)
by 0x423CF4: xwl_close_screen (xwayland.c:118)
by 0x4B6377: CursorCloseScreen (cursor.c:187)
by 0x539503: AnimCurCloseScreen (animcur.c:106)
by 0x53D081: present_close_screen (present_screen.c:64)
by 0x43DBF0: dix_main (main.c:354)
by 0x7068730: (below main) (libc-start.c:289)
Address 0xc403190 is 0 bytes inside a block of size 154 free'd
at 0x4C2CD5A: free (vg_replace_malloc.c:530)
by 0x521DF3: RROutputDestroyResource (rroutput.c:389)
by 0x45DA61: doFreeResource (resource.c:895)
by 0x45ECFD: FreeClientResources (resource.c:1161)
by 0x45EDC2: FreeAllResources (resource.c:1176)
by 0x43DB04: dix_main (main.c:323)
by 0x7068730: (below main) (libc-start.c:289)
Block was alloc'd at
at 0x4C2BBAD: malloc (vg_replace_malloc.c:299)
by 0x52206B: RROutputCreate (rroutput.c:84)
by 0x426763: xwl_output_create (xwayland-output.c:270)
by 0x422EDC: registry_global (xwayland.c:432)
by 0x740FC57: ffi_call_unix64 (unix64.S:76)
by 0x740F6B9: ffi_call (ffi64.c:525)
by 0x5495A9D: wl_closure_invoke (connection.c:949)
by 0x549283F: dispatch_event.isra.4 (wayland-client.c:1274)
by 0x5493A13: dispatch_queue (wayland-client.c:1420)
by 0x5493A13: wl_display_dispatch_queue_pending
(wayland-client.c:1662)
by 0x5493D2E: wl_display_roundtrip_queue (wayland-client.c:1085)
by 0x4232EC: xwl_screen_init (xwayland.c:632)
by 0x439F50: AddScreen (dispatch.c:3864)
Split xwl_output_destroy() into xwl_output_destroy() which frees the
wl_output and the xwl_output structure, and xwl_output_remove() which
does the RRCrtcDestroy() and RROutputDestroy() and call the latter only
when an output is effectively removed.
An additional benefit, on top of avoiding a double free, is to avoid
updating the screen size at shutdown.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The frame callback set up via wl_surface_frame() needs to be freed with
wl_callback_destroy() or we'll leak memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97065
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This loop was written in a buggy style, causing a NULL driver ptr to be
passed to copyScreen(). copyScreen() only uses that to generate an
identifier string, so this is mostly harmless on systems that accept
NULL for asprintf() "%s" format. (the generated identifiers are off
by one wrt the driver names and the last one contains NULL.
For systems that don't accept NULL for '%s' this would cause a
segmentation fault when this code is used (no xorg.conf, but partial
config in xorg.conf.d for instance).
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Keith Packard <keithp@keithp.com>
In function xf86VGAarbiterScrnInit when the "pEnt->bus.type" is
BUS_PLATFORM, the "pScrn->vgaDev" won't be set, so the "pScrn->vgaDev" is
equal to zero.
The variable "rsrc_decodes" in function "xf86VGAarbiterAllowDRI" is not
initialized. So it will occur error when "pScrn->vgaDev == 0", and
"vga_count > 1". For this case, as "pScrn->vgaDev == 0", the function
"pci_device_vgaarb_get_info" will only set the value of "vga_count",
but won't set the value of "rsrc_decodes", so it will has two different
return values for function "xf86VGAarbiterAllowDRI" in different
platforms. One platform will return TRUE, as the "rsrc_decodes" 's
default value is 0, but another platform will return FALSE, as the
"rsrc_decodes" 's default value is "32767", this will cause disable
direct rendering.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96937
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Any code called from the driver ScreenInit may want to refer to
pScrn->pScreen. As the function passed to AddScreen is the first place
the DDX sees a new screen, the generic code needs to make sure that
value is set before passing control to the video driver's
initialization code.
This was found by running a driver which didn't bother to set this
value when the initial colormap was installed; xf86RandR12LoadPalette
tried to use pScrn->pScreen and crashed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97124
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Adam Jackson
Hans de Goede
Olivier Fourdan
Rui Matos
Eric Anholt
Jeremy Huddleston Sequoia
Keith Packard
Michel Dänzer
Qiang Yu
Jon Turney
Dave Airlie
Peter Hutterer
Matthieu Herrb
Emily Deng
