Similar to how we intercept and pass through CreateContext, also pass
through newer CreateNewContext requests.
Fixes Clutter → Xephyr → VirtualBox.
Signed-off-by: Frederic Plourde <frederic.plourde@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We need to pass these requests through to the host server in the same
way we do glXMakeCurrent. Generalise the existing MakeCurrent
submission into once that will send MakeCurrent, MakeContextCurrent or
MakeCurrentReadSGI, depending on the request and the host server's
capabilities, and add decoding/hijack support for incoming
MakeContextCurrent and MakeCurrentReadSGI requests.
Fixes Clutter → Xephyr → VirtualBox.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Scale_to_desktop() converts ABS events from device coordinates
to screen coordinates:
[dev_X_min, dev_X_max] -> [screen_X_min, screen_X_max]
[dev_Y_min, dev_Y_max] -> [screen_Y_min, screen_Y_max]
An edge ABS event with X = dev_X_max (e.g., generated from the
edge of a touchscreen) will be converted to have screen X value
= screen_X_max, which, however, will be filterd out when xserver
tries to find proper Window to receive the event, because the
range check for a Window to receive events is
window_X_min <= event_screen_X < window_X_max
Events with event_screen_X = screen_X_max will fail the test get
and rejected by the Window.
To fix this, we change the device to screen coordinates mapping to
[dev_X_min, dev_X_max] -> [screen_X_min, screen_X_max-1]
[dev_Y_min, dev_Y_max] -> [screen_Y_min, screen_Y_max-1]
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
before after Operation
-------- ----------------- -----------------
1148346.9 1191807.5 ( 1.04) PutImage 10x10 square
2091666.1 2180983.0 ( 1.04) ShmPutImage 10x10 square
v3: In miDamage{R,Unr}egister, bump the serial number of the affected
drawable (and all children if it's a window) so subsequent drawing
against the damage will trigger another ValidateGC pass and we wrap
in/out correctly. Spotted by Aaron Plattner.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This hack was added to suppress events generated by Composite's internal
unmap/map cycle on redirection state change. Since that cycle was
removed in 193ecc8b4, these can go.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
The property handler is registered after setting the property, so
dev->transform remains as all-zeros. That causes pixman_f_transform_invert()
to fail (in transformAbsolute()) and invert remains as garbage. This
may then cause a cursor jump to 0,0.
Since the axes are not yet initialized here and we need to allow for drivers
changing the matrix, we cannot use the property handler for matrix
initialization, essentially duplicating the code.
Triggered by the fix to (#49347) in 749a593e49https://bugzilla.redhat.com/show_bug.cgi?id=852841
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since Nov 2010 (commit c4c4676) the only purpose of mibstore.h was to
define an empty function (miInitializeBackingStore()) for backward
compatibility. Time to say goodbye.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove any reference to mibstore.h and miInitializeBackingStore() from
the documentation.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove more backing store leftovers.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only reference to mibstore.c was removed with commit c4c4676. Remove the
file itself too.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a really awkward interface, since we're calling it well before
the driver knows what device it's going to drive. Drivers with both KMS
and UMS support therefore don't know whether to say they need I/O port
access or not, and have to assume they do.
With this change we now call it only to query whether port access might
be needed; we don't use that to determine whether to call a driver's
probe function or not, instead we call them unconditionally. If the
driver doesn't check whether port access was enabled, they might crash
ungracefully. To accomodate this, we move xorgHWAccess to be explicitly
intentionally exported (sigh xf86Priv.h) so that drivers can check that
before they attempt port access.
v2: Move initial xf86EnableIO() nearer the logic that determines whether
to call it, suggested by Simon Farnsworth.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We load the driver list, then enable I/O, then call driver probe based
on whether I/O enable succeeded. That's bad, because the loaded
security policy might forbid port access. We happen to treat that as
fatal for some reason, which means even drivers that don't need I/O
access (like kms and fbdev) don't get the chance to run. Facepalm.
How about we just make that non-fatal instead, that sounds like a much
better plan.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Pull platform methods into their own sections for legibility, and
rewrite the ifdefs to be more concise.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If we are not seat 0 the following apply:
don't probe any bus other than platform
don't probe any drivers other than platform
assume the first platform device we match on the bus is the primary GPU.
This just adds checks in the correct places to ensure this, and
with this X can now start on a secondary seat for an output device.
v2: fix Seat0 macros
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
for input devices we handle change like remove/add, but for
drm devices we get change events when we hotplug outputs,
so lets just ignore change at this level, and let the drivers
handle it. We may in the future want to route driver udev
from here instead.
Reported-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This solves a race if we are trying to dynamically power off
secondary GPUs. Its not the greatest fix ever but it probably
as good as we can do for now.
The GPU probing causes the devices to be powered up, then when
we scan the PCI bus we get the correct information from the kernel,
rather than a bunch of 0xff due to the device being powered off.
drop gratuitous '&'.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
After we share the pixmap, the backing storage may have changed,
and we need to invalidate and buffers pointing at it.
This fixes GL compositors and prime windows lacking contents initially.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise we can't do fast user switch properly for multiple GPUs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This respects the seat tag for hotplugged video devices at X start.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
this is a simple clean-up that is useful to stop further propogation
of this construct.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If we don't free this here, it gets freed later in the resource
cleanups, however it then looks up up pmap->pScreen, which we
freed already in this function. So free the default colormap
when we should.
This fixes a bug after a couple of hotplug cycles when you try
to exit the X server and it crashes.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is set by pre_init not screen init, so if we free it here
and then recycle the server, we lose all the providers.
I think we need to wrap FreeScreen here to do this properly,
will investigate for 1.14 most likely, safer to just leak this
on server exit for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some compilers have difficulty with the previous implementation which
relies on undefined behavior according to the C standard. Using
offsetof() from <stddef.h> (which most likely just uses
__builtin_offsetof on modern compilers) allows us to accomplish this
without ambiguity.
This fix also requires support for typeof(). If your compiler does not
support typeof(), then the old implementation will be used. If you see
failures in test/list, please try a more modern compiler.
v2: Added fallback if typeof() is not present.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a a gcc 4.6+ feature.
signal-logging.c:210: error: #pragma GCC diagnostic not allowed inside
functions
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We never use child[2], so it's state is undefined.
This issue seems to have existed since the test was first
written: 92788e677b
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
sighandler_t is not UNIX.
Regression from: 7f09126e06
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Introduced in 164b38c72f
Reported-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
As of 81cfe44b1e, miPointerSetPosition now
returns the screen pointer of the device. This broke floating slave devices,
as soon as a motion event was submitted, miPointerSetPosition returned NULL,
crashing the server.
dev->coreEvents is only false if the device is a floating slave, in which
case it has a sprite.
X.Org Bug 53568 <http://bugs.freedesktop.org/show_bug.cgi?id=53568>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
In WarpPointer calls, we get input in screen coordinates. They must be
scaled to device coordinates, and then back to screen coordinates for screen
crossing and root coordinates in events.
The rounding errors introduced (and clipping in core/XI 1.x events) can lead
to the actual position being different to the requested input coordinates.
e.g. 200 scales to 199.9999, truncated to 199 in the event.
Avoid this by simply overwriting the scaled screen coordinates with the
input coordinates for the POINTER_SCREEN case.
X.Org Bug 53037 <http://bugs.freedesktop.org/show_bug.cgi?id=53037>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Throw an error into the log file, but continue anyway. And after three
warnings, stop complaining. Not all input drivers will be fixed in time (or
ever) and our printf implementation is vastly inferior, so there is still a
use-case for non-sigsafe logging.
This also adds more linebreaks to the message.
CC: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The mouse driver uses %i in some debug messages
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Throw an assert when the conversion fails instead of just returning. Asserts
are more informative.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Commit 9d457f9c55 added an array of
DevPrivateSetRec structures in the middle of the ScreenRec, which throws off
extension modules trying to call things like pScreen->DestroyPixmap.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This change is #if'd out due to a bug in asl_log_descriptor, but
it is left here as reference to be enabled in the future.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Frederic Plourde
Daniel Stone
Yufeng Shen
Keith Packard
Adam Jackson
Peter Hutterer
Daniel Martin
Jeremy Huddleston Sequoia
Dave Airlie
Dave Airlie
Aaron Plattner