If it's really this important we should just do it and not complain. We
never do it so it must not matter.
Signed-off-by: Adam Jackson <ajax@redhat.com>
I'm sure printing the address of function pointers in modules you'd
loaded might have made sense back when we rolled our own dlopen, but we
got better.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The old code would not in fact validate the option value, though it
might complain about it in the log. It also didn't let you set some
legal values that the -maxclients command line option would.
Signed-off-by: Adam Jackson <ajax@redhat.com>
DGAShutdown() walks every screen and attempts to reset the mode. That's
maybe a reasonable thing to do, although the explicit loop is certainly
a bad smell.
In ddxGiveUp it's called after we've torn down the vga arbiter - and in
fact most of the rest of screen state - which is... very very bad. The
other place it's called is from the Control-Alt-BackSpace handler, where
we don't even attempt to do vga arb setup, and where in any case we're
going to escape the main loop eventually anyway.
Move all that cleanup work inside DGACloseScreen. This means it happens
earlier in server teardown than previously, but not in a way you're ever
going to be upset about.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The X will be crashed on the system with other DDX driver,
such as amdgpu.
show the log like:
randr: falling back to unsynchronized pixmap sharing
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e)
(EE) 1: /usr/lib/xorg/Xorg (0x55cb0151a000+0x1b5ce9)
(EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f1587a1d000+0x11390)
(EE)
(EE) Segmentation fault at address 0x0
(EE)
The issue is that modesetting as the master, and amdgpu as the slave.
Thus, when the master attempts to access pSlavePixPriv in ms_dirty_update(),
problems result due to the fact that it's accessing AMD's 'ppriv' using the
modesetting structure definition.
Apart from fixing crash issue, the patch fix other issue in master interface
in which driver should refer to master pixmap.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Goins <agoins@nvidia.com>
This makes us match the featureset of autotools, and also fixes the
non-Linux default value to match.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
I don't have a BSD to test on, but this should do the same as what
autotools did.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have pm_noop.c being built most of the time for the
no-OS-PM case, so just switch to always using it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of having every video driver loop over any pending leases to
free them during CloseScreen, do this up in the DIX layer by
terminating leases when a leased CRTC or Output is destroyed and
(just to make sure), also terminating leases in RRCloseScreen. The
latter should "never" get invoked as any lease should be associated
with a resource which was destroyed.
This is required as by the time the driver's CloseScreen function is
invoked, we've already freed all of the DIX randr structures and no
longer have any way to reference the leases
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
Cc: Thomas Hellstrom <thellstrom@vmware.com>
The recent rewrite of modesetting driver broke the 24bpp support.
As typically found on cirrus KMS, it leads to a blank screen, spewing
the error like:
failed to add fb -22
(EE) modeset(0): failed to set mode: Invalid argument
The culript is that the wrong bpp value of the front buffer is passed
to drmModeAddFB(). Fix it by replacing with the back buffer bpp,
drmmode->kbpp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When setting DefaultDepth to 16 in the Screen section, the current
code requests a 32 bpp framebuffer, however the X-Server seems to
assumes 16 bpp.
Fixes commit 21217d0216 ("modesetting: Implement 32->24 bpp
conversion in shadow update")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
If we're using atomic modesetting, then we're also using universal
planes, and so the lease we create needs to include the plane.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We don't want universal_planes unless we're using atomic APIs for
modesetting, and the kernel already enables universal_planes
automatically when atomic is enabled.
If we enable universal_planes when we're not using atomic, then we
won't have selected a plane for each crtc, and this will break lease
creation which requires planes for each output when universal_planes
is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The DIX crtc and output structures are freed when their resources are
destroyed, which happens before CloseScreen is called. As a result, we
know these pointers are invalid and referencing them during any of the
remaining CloseScreen sequence will be bad.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: thellstrom@vmware.com
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
This lets an application open a suitable DRM device and pass the file
descriptor to the mode setting driver through an X server command line
option, '-masterfd'.
There's a companion application, xlease, which creates a DRM master by
leasing an output from another X server. That is available at
git clone git://people.freedesktop.org/~keithp/xlease
v2:
Always print usage, but note that it can't be used if
setuid/gid
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
So, this did actually work on older kernels at one point in time,
however it seems that this working was a result of some of the Linux
kernel's atomic modesetting helpers not preserving the CRTC's enabled
state in the right spots. This was fixed in:
846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2")
As a result, atomic commits which simply disassociate a DRM connector
with it's CRTC while leaving the CRTC in an enabled state aren't enough
to disable the CRTC, and result in the atomic commit failing. This
currently can cause issues with MST hotplugging where X will end up
failing to disable the MST outputs after they've left the system. A
simple reproducer:
- Start up Xorg
- Connect an MST hub with displays connected to it
- Remove the hub
- Now there should be CRTCs stuck on the orphaned MST connectors, and X
won't be able to reclaim them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
drmmode_shadow_allocate() still uses drmModeAddFB() which may fail if
the format is not as expected, preventing from using a rotated output.
Change it to use the new function drmmode_bo_import() which takes care
of calling the drmModeAddFB2() API.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106715
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Tomas Pelka <tpelka@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Change the 'chown' statement in Makefile.am to use the numeric UID
of superuser instead of relying on the name 'root'.
Bugzilla: https://bugs.freedesktop.org/27726
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michał Górny <gentoo@mgorny.alt.pl>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In commit 9db2af6f75 (xfree86: Remove xf86{Map,Unmap}VidMem) we
somehow stopped exporting xf86{Read,Write}Mmio{8,16,32}. Since the
function pointer indirection was intended to support dense vs sparse and
sparse support is now gone, we can just make the functions static inline
in compiler.h and avoid all of this.
Bugzilla: https://bugs.gentoo.org/548906
Tested-by: Christopher May-Townsend <chris@maytownsend.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
We don't want DRM file descriptors to leak to child processes.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
It was passing O_CLOEXEC as permission bits instead of as a flag.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Fixes DRI2 client driver name mapping for newer AMD GPUs with the
modesetting driver, allowing the DRI2 extension to initialize.
Fixes using GL with the modesetting driver for me.
Seems we were way behind on this one, time to look into something
more scalable?
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Modifiers support needs gbm as a dependency. Without setting the dependency
included headers are not found reliably and the build might fail if the
headers are not placed in the default system include paths.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The old 32-Bit wraparound handling didn't actually work, due to some
integer casting bug, and the mapping was ill equipped to deal with input
from the new true 64-bit GetCrtcSequence/QueueCrtcSequence api's
introduced in Linux 4.15.
For 32-Bit truncated input from pageflip events and old vblank events
and old drmWaitVblank ioctl, implement new wraparound handling, which
also allows to deal with wraparound in the other direction, e.g., if a
32-Bit truncated sequence value is passed in, whose true 64-Bit
in-kernel hw value is within 2^30 counts of the previous processed
value, but whose 32-bit truncated sequence value happens to lie just
above or below a 2^32 boundary, iow. one of the two values 'sequence'
vs. 'msc_prev' lies above a 2^32 border, the other one below it.
The method is directly translated from Mesa's proven implementation of
the INTEL_swap_events extension, where a true underlying 64-Bit wide
swapbuffers count (SBC) needs to get reconstructed from a 32-Bit LSB
truncated SBC transported over the X11 protocol wire. Same conditions
apply, ie. successive true 64-Bit SBC values are close to each other,
but don't always get received in strictly monotonically increasing
order. See Mesa commit cc5ddd584d17abd422ae4d8e83805969485740d9 ("glx:
Handle out-of-sequence swap completion events correctly. (v2)") for
explanation.
Additionally add a separate path for true 64-bit msc input originating
from Linux 4.15+ drmCrtcGetSequence/QueueSequence ioctl's and
corresponding 64-bit vblank events. True 64-bit msc's don't need
remapping and must be passed through.
As a reliability bonus, they are also used here to update the tracking
values msc_prev and ms_high with perfect 64-Bit ground truth as baseline
for mapping msc from pageflip completion events, because pageflip events
are always 32-bit wide, even when the new kernel api's are used. Because
each pageflip(-event) is always preceeded close in time (and vblank
count) by a drmCrtcQueueSequence queued event or drmCrtcGetSequence
query as part of DRI2 or DRI3+Present swap scheduling, we can be certain
that each pageflip event will get its truncated 32-bit msc remapped
reliably to the true 64-bit msc of flip completion whenever the sequence
api is available, ie. on Linux 4.15 or later.
Note: In principle at least the 32-bit mapping path could also be
backported to earlier server branches, as this seems to be broken for at
least server 1.16 to 1.19.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
The function is ported from intel-ddx uxa backend around 2013, where its
stated purpose was to apply a vblank_offset to msc values to correct for
problems with those kernel provided msc values. Some (somewhat magic and
puzzling to myself) heuristic tried to guess if provided values were
unreasonable and tried to adapt the corrective vblank_offset to account
for that.
Except: It wasn't applied to kernel provided msc values, but the values
delivered by clients via DRI2 or Present, so valid client targetmsc
values, e.g., requesting a vblank event > 1000 vblanks in the future,
triggered the offset correction in arbitrarily wrong ways, leading to
wrong msc values being returned and thereby vblank events queued to the
kernel for the wrong time. This causes glXSwapBuffersMscOML and
glXWaitForMscOML to swap / return immediately whenever a swap/wait in >
1000 vblanks is requested.
The original code was also written to only deal with 32 bit mscs, but
server 1.20 modesetting ddx can now use new Linux 4.15+ kernel vblank
api to process true 64 bit msc's, which may confuse the heuristic even
more due to 32 bit integer truncation/wrapping.
This code caused various problems in the intel-ddx in the past since
year 2013, and was removed there in 2015 by Chris Wilson in commit
42ebe2ef9646be5c4586868cf332b4cd79bb4618:
" uxa: Remove the filtering of bogus Present MSC values
If the intention was to filter the return values from the kernel, the
filtering would have been applied to the kernel values and not to the
incoming values from Present. This filtering introduces crazy integer
promotion and truncation bugs all because Present feeds garbage into its
vblank requests.
"
Indeed, i found a Mesa bug yesterday which can cause Mesa's
PresentPixmap request to spuriously feed garbage targetMSC's into the
driver under some conditions. However, while other video drivers seem to
cope relatively well with that, modesetting ddx causes KDE-5's
plasmashell to lock up badly quite frequently, and my suspicion is that
the code removed in this commit is one major source of the extra
fragility.
Also my own tests fail for any swap scheduled more than 1000 vblanks
into the future, which is not uncommon for some scientific applications.
Iow. modesetting's swap scheduling seems to be more robust without this
function afaics.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Keith Packard <keithp@keithp.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Copied from Mesa with no modifications.
Gives us Cofeelake platform names updates and sync on Kaby Lake,
Ice Lake PCI IDs.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
GBM objects were never destroyed after looking for format and
modifier compatibility when deciding whether flipping or copying
a presented pixmap.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106106
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Kludge sdksyms.c generator to not fail on GetClientPid.
It returns pid_t which on NetBSD is #define pid_t __pid_t
This slightly alters the GCC preprocessor output which this fragile
code could not deal with when using GCC 5+
Signed-off-by: Adam Jackson <ajax@redhat.com>
Use the DRM_CAP_ADDFB2_MODIFIERS query to make sure the kms
driver supports modifiers in the addfb2 ioctl, and fall back
to addfb ioctl without modifiers if modifiers are unsupported.
E.g., as of Linux 4.17, nouveau-kms so far does not suppport
modifiers and gets angry if drmModeAddFB2WithModifiers() is
called (-> failure to set a video mode -> blank screen), but
Mesa's nvc0+ gallium driver causes gbm_bo_get_modifier() to
return a valid modifier by translating the default tiling of
bo's created via gbm_bo_create() into a modifier other than
DRM_FORMAT_MOD_INVALID (see Mesa's nvc0_miptree_get_modifier()).
Testing for != DRM_FORMAT_MOD_INVALID is apparently not
sufficient for safe use of drmModeAddFB2WithModifiers.
Bonus: Handle potential failure of populate_format_modifiers().
The required DRM_CAP is defined since libdrm v2.4.65, and we
require v2.4.89+ for the server, so we can use it unconditionally.
Tested on intel-kms, radeon-kms, nouveau-kms. Fixes failure on
NVidia Pascal.
Fixes: 2f807c2324 ("modesetting: Add support for multi-plane pixmaps when page-flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
ms_queue_vblank() returns false on failure.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Apparently on NetBSD we can hit failures like this:
sdksyms.c:1773:15: error: expected expression before ',' token
(void *) &, /* ../../dri3/dri3.h:110 */
I've been unable to reproduce that locally (even in a NetBSD vm), but
an obvious workaround might be to just notice empty symbol names and
ignore them rather than emit invalid C code.
Tested-by: Thomas Klausner <wiz@netbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This was never merged upstream. It was a Fedora kernel patch but dropped from
Fedora in 2013 with kernel 3.12.
The reason for the KDSKBMUTE proposal has been fixed in systemd in Feb 2013,
systemd 198.
https://lists.freedesktop.org/archives/systemd-devel/2013-February/008795.html
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
../hw/xfree86/utils/gtf/gtf.c: In function ‘print_fb_mode’:
../hw/xfree86/utils/gtf/gtf.c:241:50: warning: cast from function call of type ‘double’ to non-matching type ‘int’ [-Wbad-function-cast]
printf(" timings %d %d %d %d %d %d %d\n", (int) rint(1000000.0 / m->pclk), /* pixclock in picoseconds */
That's pretty nitpicky of you, gcc, but at least it's easy to fix.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
We would fail to get the FB ID if it wasn't already imported, since we
were checking to see if the pointer was NULL (it never was) rather than
if the content of the pointer was 0.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
drmmode_crtc_set_mode has a loop nested inside another loop, where both
of them were using 'i' as the loop iterator. Rename it to avoid an
infinite loop.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Non-atomic kms drivers like radeon-kms (or nouveau-kms with
default setting of "atomic ioctl disabled") don't export
any formats, so num_formats == 0.
Some atomic drivers (nouveau-kms with boot param nouveau.atomic=1,
or intel-kms on, e.g., Linux 4.13) expose num_formats == 0, or
don't expose any modifiers, so num_modifiers == 0.
Let the drmmode_is_format_supported() check pass in these cases
to allow page flipping, as it works just fine.
Tested on NV-96 for nouveau, HD-5770 for radeon, Intel Ivybridge
with Linux 4.13 and drm-next to fix page flipping.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We need to make sure that the atomic commit are consistent
or else the kernel will reject it. For example, when moving
a CRTC from one output to another one, the first output CRTC_ID
property needs to be reset. Also if the second output was using
another CRTC beforehands, it needs to be disabled to avoid an
inconsistent state.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
CRTCs and outputs needs to be enabled/disabled when the current
DPMS mode is changed. We also try to do it in an atomic commit
when possible.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of whether or not we fed modifiers into GBM when we allocated
a BO. We'll use this later inside Glamor, to reallocate buffer storage
if we allocate buffer storage using modifiers, and a non-modifier-aware
client requests an export of that pixmap.
This makes it possible to run a compositing manager on an old GLX/EGL
stack on top of an X server which allocates internal buffer storage
using exotic modifiers from modifier-aware GBM/EGL/KMS.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of whether or not we fed modifiers into GBM when we allocated
a BO. We'll use this later inside Glamor, to reallocate buffer storage
if we allocate buffer storage using modifiers, and a non-modifier-aware
client requests an export of that pixmap.
This makes it possible to run a compositing manager on an old GLX/EGL
stack on top of an X server which allocates internal buffer storage
using exotic modifiers from modifier-aware GBM/EGL/KMS.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The newline before the protocl version got lost in commit
6cbefc3e0a. Prior to that commit, the
release date printed a newline at the end:
X.Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.14.12-1-ARCH x86_64
Now, that string gets run together with the version:
X.Org X Server 1.19.99.903 (1.20.0 RC 3)X Protocol Version 11, Revision 0
Build Operating System: Linux
Since the version string printing has a variety of #ifdefs in it, just
add the newline to the begining of the protocol version string.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The framebuffer can include multiple CRTCs in multi-monitors
setup. So we shouldn't use the buffer size but the CRTC size
instead. Rotated displays are shadowed, so we don't need to
worry about it there.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fixes a regression caused by modifiers support. For some hw to
continue working even if not supporting ARGB8888 and ARGB2101010
formats, we assume that all imported BOs are opaque.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Otherwise the same content is shown on all outputs.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.comM>
The respective ISA functions were dropped back in 2008
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Install missing headers to the SDK directory to allow external modules
to properly build against the SDK. After this commit, the list of files
installed in the SDK include directory is the same as the list of files
installed by the autotools-based build.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drmmode_output_dpms is called especially with !output->crtc found in
xf86DisableUnusedFunctions so we have to guard for it, else the server
segfaults:
0 0x00007fdc1706054b in drmmode_output_dpms (output=0x55e15243c210, mode=3) at
drmmode_display.c:2243
1 0x000055e1500b6873 in xf86DisableUnusedFunctions (pScrn=0x55e152133f00) at
xf86Crtc.c:3021
2 0x000055e1500be940 in xf86RandR12CrtcSet (pScreen=<optimized out>,
randr_crtc=0x55e1524b2b90, randr_mode=0x0, x=0, y=0, rotation=<optimized out>,
num_randr_outputs=0, randr_outputs=0x0) at xf86RandR12.c:1244
3 0x000055e1500fa1c2 in RRCrtcSet (crtc=<optimized out>, mode=0x0, x=0, y=0,
rotation=rotation@entry=1, numOutputs=numOutputs@entry=0, outputs=0x0) at
rrcrtc.c:763
4 0x000055e1500fba9e in ProcRRSetCrtcConfig (client=0x55e152bfae50) at
rrcrtc.c:1390
5 0x000055e150044008 in Dispatch () at dispatch.c:478
6 0x000055e150047ff8 in dix_main (argc=13, argv=0x7ffc68561038,
envp=<optimized out>) at main.c:276
7 0x00007fdc1a0c6a87 in __libc_start_main () at /lib64/libc.so.6
8 0x000055e150031d0a in _start () at ../sysdeps/x86_64/start.S:120
Fixes: ba0c75177 ("modesetting: Fix up some XXX from removing GLAMOR_HAS_DRM_*")
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
... for xfree86, at least for now. Things appear to work for Xwayland
but not yet for modesetting. Hopefully we can fix that before 1.20 but
in the meantime this makes testing both paths easier than a rebuild.
Signed-off-by: Adam Jackson <ajax@redhat.com>
We don't use flink in the GetFB import path anymore, as we do an
FD-based import instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
A cosmetic change for automake (though we have to replicate some of
xorg-macros.m4 in manpages.am now), but meson's configure_file() wants
@-delimited strings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The check for "no modifier specified" in drmmode_is_format_supported()
should check for DRM_FORMAT_MOD_INVALID, not for zero, as zero actually
means DRM_FORMAT_MOD_LINEAR.
This allows page-flipping again when appropriate, as
tested under nouveau and ati drivers.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[... but leave it defined and exported, since we're ABI-frozen - ajax]
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
restore abi
Having different types of code all trying to check for elevated privileges
is a bad idea. This implementation is the most thorough one.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
All the macros are available in the libdrm that we depend on.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We already require libdrm 2.4.89 which provides the definition plus
guarding kernel UABI like that is generally a bad idea.
See previous commit for details why :-)
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The macro was available in libdrm for ages. Furthermore having a guard
like this is a very bad idea.
Building on an old server will result in a missing run-time functionality.
Since it's UABI one can use a local fallback, old kernels will return
-EINVAL and the fallback path will kick in.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This reverts commit 8c455db0eb.
Since xf86platformBus.h is only included when XSERVER_PLATFORM_BUS is
defined, and configure.ac only defines that on systems with udev, this
commit breaks the build on non-udev systems like Solaris.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Copied from Mesa with no modifications.
Gives us Geminilake and Kaby Lake platform names updates and
sync on Coffee Lake PCI IDs.
Cc: Timo Aaltonen <timo.aaltonen@canonical.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add support for 'check_flip2' so that the present core can know
why it is impossible to flip in that scenario. The core can then
let know the client that the buffer format/modifier is suboptimal.
v2: No longer need to implement 'check_flip'
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Use most optimal buffer format (e.g. tiled/compressed) available
for scanout.
v2: Don't use multi-plane modifier to create scanout buffer
v3: Add flag to retrieve modifiers set from enabled CRTCs only
v4: Fix uses when GBM/EGL driver doesn't support modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Retrieve IN_FORMATS property from the plane. It gives the
allowed formats and modifiers for BO allocation.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
To make sure we also use the same primary plane and to avoid
mixing uses of two APIs, it is better to always use the atomic
modesetting API when possible.
v2: Don't use mode_output->connector_id
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allows the uses of CCS compressed or tiled pixmaps as BOs when
page-flipping.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This lets a DRM client map between X outputs and kernel connectors.
v2:
Change CONNECTOR_ID to enum -- Adam Jackson <ajax@nwnk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Save any value of the kernel non-desktop property in the xf86Output
structure to avoid non-desktop outputs in the default configuration.
[Also bump randrproto requirement to a version that defines
RR_PROPERTY_NON_DESKTOP - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
At startup, we want to ignore non-desktop monitors unless we don't
find any desktop monitors. Because there are no DIX RandR resources
allocated, let the driver store this information in a new field in the
xf86Output structure and then use that value to help decide whether to
include an output as part of the default configuration.
v2:
Suggested-by: Michel Dänzer <michel@daenzer.net>
Bump XF86_CRTC_VERSION from 7 to 8. This will let out-of-tree
drivers know whether this field is available.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
glamor now supports depth 30, so allow use of it.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
This retains old behavior for depths <= 24, but allows gamma
table and colormap updates to work properly at depth 30.
This needs the xf86Randr12CrtcComputeGamma() fix for depth 30
from a previous commit to work. Otherwise the server will work,
but gamma table updates will silently fail, iow. the server
would always run with a default identity gamma lut.
v2: Simplify as proposed by Michel.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk> (v1)
At screen depths > 24 bit, the color palettes passed into
xf86Randr12CrtcComputeGamma() can have a larger number of slots
than the crtc's hardware lut. E.g., at depth 30, 1024 palette
slots vs. 256 hw lut slots. This palette size > crtc gamma size
case is not handled yet and leads to silent failure, so gamma
table updates do not happen.
Add a new subsampling path for this case.
This makes lut updates work again, as tested with the xgamma
utility (uses XF86VidMode extension) and some RandR based
gamma ramp animation.
v2: Better resampling when subsampling the palette, as
proposed by Ville. Now reaches the max index of the
palette and deals with non-power-of-two sizes. Thanks.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk> (v1)
Cc: <ville.syrjala@linux.intel.com>
Support x-screens of depth 30, so init doesn't fail.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Turns out that the kernel DRM ioctl handling returns EINVAL
instead of ENOTTY if one tries to call the new drmCrtcGetSequence()
or drmCrtcQueueSequence() ioctl's introduced in Linux 4.15 on an
older kernel where they are missing. This causes the fallback code
not to fall back to the old drmWaitVblank() ioctl and thereby
failure of vblank stuff.
E.g., on Linux 4.13, glxgears -info runs unthrottled at 10000 fps
instead of 60 fps. Also breakage of OML_sync_control extension.
Check for errno != EINVAL before setting has_queue_sequence = TRUE.
Additionally in case of supported drmCrtcQueueSequence(), set
has_queue_sequence = TRUE on success, or we might get at
least a temporary failure in ms_queue_vblank().
One slight ambiguity is that we can also get EINVAL if
drm_crtc_vblank_get() fails in the kernel, so if that
happened at first invocation of the new api, we'd fall
back to drmWaitVblank() and then fail there, instead of
failing in the new api, but the end result would be the
same.
Fixes: 44d5f2eb8a ("xf86-video-modesetting: Support new vblank kernel API [v2]")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Add the missing arguments to the function signature.
Fixes: e46820fb89 ("miinitext: introduce LoadExtensionList() to replace
over LoadExtension()")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a stub for Xnest so it continues to link, but otherwise we support
GLX on every server so there's no need to make every DDX add it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The big change here is MakeCurrent and context tag tracking. We now
delegate context tags entirely to the vnd layer, and simply store a
pointer to the context state as the tag data. If a context is deleted
while it's current, we allocate a fake ID for the context and move the
context state there, so the tag data still points to a real context. As
a result we can stop trying so hard to detach the client from contexts
at disconnect time and just let resource destruction handle it.
Since vnd handles all the MakeCurrent protocol now, our request handlers
for it can just be return BadImplementation. We also remove a bunch of
LEGAL_NEW_RESOURCE, because now by the time we're called vnd has already
allocated its tracking resource on that XID.
v2: Update to match v2 of the vnd import, and remove more redundant work
like request length checks.
v3: Add/remove the XID map from the vendor private thunk, not the
backend. (Kyle Brenneman)
v4: Fix deletion of ghost contexts (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
DoConfigure() attempts to call the PreInit handler on a device without
checking that the handler exists.
Check that the PreInit handler exists for a device before attempting to
call it.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the dev2screen is sized to xf86NumDrivers in DoConfigure(),
subsequent code may attempt to write past the end of the array.
Size the dev2screen array to nDevToConfig instead.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Commits b5dffbb and d75ffcd introduce code in xf86platformProbe() that
references a member of xf86configptr. However, when using the
"-configure" option, xf86configptr may not be initialized when
xf86platformProbe() is called.
Avoid referencing a member of xf86configptr if uninitialized.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100405
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
dri2.c:516:21: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (front->name < 0)
Prevents a failure from being ignored.
xf86pciBus.c:1464:21: warning: comparison of constant 256 with expression of type 'uint8_t' (aka 'unsigned char') is always true [-Wtautological-constant-out-of-range-compare]
if (pVideo->bus < 256)
The code used to be in xf86FormatPciBusNumber and compared parameter which was int, but since b967bf2a it was inlined now it works with uint8_t.
xf86PruneDuplicateModes is passed a linked list of modes, and after
pruning the duplicate nodes, the new head of the list is returned. If
the first element is removed, the head of the list will change and the
returned value needs to be assigned.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103722
Thanks: John Lumby <johnlumby@hotmail.com>
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The only way to get at xf86Info.disableRandR from configuration is
Option "RANDR" "foo" in ServerFlags, which probably nobody is using
seeing as it's not documented. The other way it could be set is if a
screen supports RANDR 1.2, in which case we set it to avoid trying to
use the RANDR 1.1 compat code. If the second screen is not 1.2-aware
then this would mean we don't do RANDR setup on the second screen at
all, which would almost certainly crash the first time you try to do
RANDR operations on the second screen.
Fix that all by deletion, and just check whether the screen already has
RANDR initialized before installing the stub support. If you want to
disable RANDR, use the Extensions section of xorg.conf instead.
v2: Also remove a now entirely pointless log message, telling you to
ignore a line we will no longer print.
v3: Explain the fallback path in InitOutput. (Keith Packard)
v4: Check whether the RANDR private key is initialized before trying to
use it to look up the screen private.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tsk. This broke vesa for me, the rrGetScrPriv in InitOutput will crash
if randr's screen private key hasn't been initialized yet. That seems
dumb, but let's not leave it broken.
This reverts commit c08d7c1cdd.
The only way to get at xf86Info.disableRandR from configuration is
Option "RANDR" "foo" in ServerFlags, which probably nobody is using
seeing as it's not documented. The other way it could be set is if a
screen supports RANDR 1.2, in which case we set it to avoid trying to
use the RANDR 1.1 compat code. If the second screen is not 1.2-aware
then this would mean we don't do RANDR setup on the second screen at
all, which would almost certainly crash the first time you try to do
RANDR operations on the second screen.
Fix that all by deletion, and just check whether the screen already has
RANDR initialized before installing the stub support. If you want to
disable RANDR, use the Extensions section of xorg.conf instead.
v2: Also remove a now entirely pointless log message, telling you to
ignore a line we will no longer print.
v3: Explain the fallback path in InitOutput. (Keith Packard)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Fixes double-free later in xf86XvMCCloseScreen, which would generally
cause fireworks.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
This really just wants to be the list of disable booleans and
initialization functions, and nothing else. Stop including the protocol
headers from extinit.h, remove a stray mention of xgl, and move an
XInput declaration to a better place.
v2: A bunch of drivers assume they'll get the DPMS tokens implicitly,
so add it to globals.h.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This makes sure the CRTC's cursor is hidden before we hand the CRTC
over to some other application.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
We were updating the link-status property when a uevent came in, but
we also want to update the non-desktop property, and potentially
others as well. We also want to check at detect time in case we don't
get a hotplug event.
This patch updates every property provided by the kernel, sending
changes to DIX so it can track things as well.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
drmCrtcGetSequence returns the current vblank sequence and time.
drmCrtcQueueSequence queues an event for delivery at a specified
vblank sequence.
Use these (when available) in preference to drmWaitVBlank.
v2: Remove FIRST_PIXEL_OUT_FLAG. This has been removed from the kernel
API.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the call to queue a vblank event fails, we need to clean up by
removing the user-space queue entry. That is indexed by the local
sequence number, not by the kernel vblank count. The call in this
case was just passing the wrong value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
With -Wformat-nonliteral and a debug build you'd get yelled at here:
../hw/xfree86/x86emu/x86emu/debug.h:188:9: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
To fix this, rewrite the printf code to actually use varargs and the
appropriate format attribute. All callers of DECODE_PRINTF() pass a
string with no % specifiers, so we pass that as the argument to
printf("%s"). For DECODE_PRINTF2() we just pass the args through.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Avoid adding a "standard" mode timing if we've already got a matching
detailed timing. To help with that, parse CEA blocks for detailed
timings before doing standard or established timings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Fix meson_option.txt to align with the check of the int10 option against
'disabled', not 'false' in hw/xfree/meson.build, to see if it shouldn't be
built at all.
This keeps everything consistent that 'false' always turns things off.
Not noticed before as options weren't validated against choices until meson
0.43
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
The install rule of Xorg.wrap is currently a dependency of the
install-data target instead of the install-exec target. The build also
uses install-exec-hook to change the ownership and set the SUID bit on
the Xorg.wrap binary. The problem is that install-exec-hook is only
ordered respective to the install-exec target, the rules of install-data
may or may not have been executed.
If install-exec-hook runs before the Xorg.wrap binary is in place,
a message similar to the following will be present in the build log:
chown: cannot access '/pkgdir/usr/lib/xorg-server/Xorg.wrap': No such file or directory
make[6]: [Makefile:1151: install-exec-hook] Error 1 (ignored)
All that needs to be done is to change the name of the program variable
to contain 'exec' for the install rule to depend on the install-exec
target.
Excerpt from the Automake manual, chapter 12.2 The Two Parts of Install:
"Any variable using a user-defined directory prefix with ‘exec’ in the
name (e.g., myexecbin_PROGRAMS) is installed by install-exec. All other
user-defined prefixes are installed by install-data."
https://bugs.freedesktop.org/show_bug.cgi?id=104419
Signed-off-by: Lukáš Krejčí <lskrejci@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The "done" label restores crtc-> {x,y,rotation,mode}, frees output_id.
Doing the calloc() before writing to those values frees us from
necessity to restore them if calloc fails, and allows to merge
"if (mode)" block.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This no longer does anything useful.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The only consumer of this is the Linux vm86 backend for int10 (which you
should not use), and there all it serves to do is make signals generated
by the vm86 task non-fatal. In practice this error appears never to
happen, and marching ahead with root privileges after arbitrary code has
raised a signal seems like a poor plan.
Remove the usage in the vm86 code, making this error fatal.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This was added in ~2004 for the sis driver, to detect whether it could
use SSE for memcpy. Charmingly, the code to check whether that feature
exists in the server is:
#if XORG_VERSION_CURRENT >= XORG_VERSION_NUMERIC(6,8,99,13,0)
#define SISCHECKOSSSE /* Automatic check OS for SSE; requires SigIll facility */
#endif
Which means it has never worked in any modular server release.
A less gross way to do this is to check for SSE support with getauxval()
or /proc/cpuinfo or similar. Since no driver is using the existing
intercept mechanism, drop it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
CMAP_LOAD_EVEN_IF_OFFSCREEN has been encapsulated since the import of
xf86-video-modesetting into the tree.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
If drmModeGetConnector() fails in drmmode_output_detect(), we have to
reset the output_id to -1 too.
Yet another spot leading to a potential NULL dereference when handling
the mode_output member as output_id was != -1. Though, this case should
be very hard to hit.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Add a missing new-line character and make the message more verbose than
"Failed".
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Those warnings are generated, when building without systemd support:
../hw/xfree86/os-support/linux/lnx_platform.c: In function ‘get_drm_info’:
../hw/xfree86/os-support/linux/lnx_platform.c:29:16: warning: variable ‘minor’ set but not used [-Wunused-but-set-variable]
int major, minor, fd;
^~~~~
../hw/xfree86/os-support/linux/lnx_platform.c:29:9: warning: variable ‘major’ set but not used [-Wunused-but-set-variable]
int major, minor, fd;
^~~~~
In this case the functions are macros, which don't use theese arguments.
v2: Add comments, why the warnings appear. Suggested by Emil Velikov
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
The CEA extension short video descriptors contain the VIC, which starts
at 1, not 0.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Roundhouse kick replacing the various (sizeof(foo)/sizeof(foo[0])) with
the ARRAY_SIZE macro from dix.h when possible. A semantic patch for
coccinelle has been used first. Additionally, a few macros have been
inlined as they had only one or two users.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If one misconfigures a ZaphodHeads value (more than 20 characters
without a delimiter), we get an overflow of our buffer. Use
xstrtokenize() instead of writing/fixing our own tokenizer.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Change 677c32bc refactored all usages of drmWaitVBlank() into a helper function,
ms_queue_vblank().
ms_queue_vblank() takes in an MS_QUEUE_RELATIVE flag to indicate that the
sequence number is relative rather than absolute, but still treats the actual
sequence number as absolute, passing it through ms_crtc_msc_to_kernel_msc()
unconditionally before calling drmWaitVBlank().
ms_crtc_msc_to_kernel_msc() works by subtracting a vblank offset from the
provided sequence number, which only makes sense for absolute sequence numbers.
In the case of PRIME Sync, drmmode_SharedPixmapPrsentOnVBlank() passes in 1,
which results in a large negative vblank offset. After subtracting, we're left
with a relative sequence number of 100,000+, i.e. wait for 100,000+ vblanks...
In the relative case we want to pass in the sequence number unmodified. Simply
add a check to do this.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Similar to change cba5a10f, xf86ScreenSetCursor() would dereference ScreenPriv
without NULL checking it. If Option "SWCursor" is specified, ScreenPriv == NULL.
Without this fix, it is observed that setting Option "SWCursor" "on" on the
modesetting driver in a PRIME configuration will segfault the server.
It is important to return success rather than failure in the instance that
ScreenPriv == NULL and pCurs == NullCursor, because otherwise xf86SetCursor()
can fall into infinite recursion: xf86SetCursor(pCurs) calls
xf86ScreenSetCursor(pCurs), and if FALSE, calls xf86SetCursor(NullCursor). If
xf86ScreenSetCursor(NullCursor) returns FALSE, it calls
xf86SetCursor(NullCursor) again and this repeats forever.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
No need to lookup the link-status property if we don't have a crtc.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
XF86_PDEV_SERVER_FD is defined since:
commit 5fb641a29b
Author: Hans de Goede <hdegoede@redhat.com>
Date: Mon Jan 13 12:03:46 2014 +0100
hotplug: Extend OdevAttributes for server-managed fd support
ifdef'ing for it is a leftover from the external xf86-video-modesetting.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
../hw/xfree86/drivers/modesetting/driver.c: In function ‘redisplay_dirty’:
../hw/xfree86/drivers/modesetting/driver.c:586:20: warning: unused variable ‘ms’ [-Wunused-variable]
modesettingPtr ms = modesettingPTR(xf86ScreenToScrn(screen));
Move the variable ms into #ifdef GLAMOR_HAS_GBM, where it is used.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Warnings come from the fact that PRIx32 is not used for printing 32 bit
values instead of "%lx", and "%lx" evaluates to a 64 bit long on 64 bit
systems while PRIx32 always evaluates to the right type for the
respective arch.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
fbdevhw is the only file in X's source that actually uses #if DEBUG to
check for debugging instead of #ifdef DEBUG. This is contrary to
everything else that checks the DEBUG macro in the source, so let's make
it consistent and in turn, make our meson files a little simpler.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For the loadable modules it makes sense to build for PE/COFF targets, link
those loadable modules with the import library for the Xorg executable, so
that symbols provided by the executable can be satisfied at link time (as
required by PE/COFF).
Since this uses the syntax of using the returned build target object from an
executable() with an implib: kwarg to link_with:, introduced in meson 0.42
and a syntax error with older meson, also update the minimum meson version
which we require in project() to that.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
This provides an API wrapper around the kernel interface for queueing
a vblank event, simplifying all of the callers.
v2: Fix missing '|' in computing vbl.request.type
v3: Remove spurious bit of next patch (thanks, Michel Dänzer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Outputs may have NULL mode_output (connector) pointers if the
connector disappears while the server is running. Skip these when
resetting outputs with BAD link status.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Spotted by Appveyor:
xf86Crtc.c:3281:1: warning: ‘xf86_crtc_box_area’ defined but not used [-Wunused-function]
xf86_crtc_box_area(BoxPtr box)
^~~~~~~~~~~~~~~~~~
xf86Crtc.c:3268:1: warning: ‘x86_crtc_box’ defined but not used [-Wunused-function]
x86_crtc_box(xf86CrtcPtr crtc, BoxPtr crtc_box)
^~~~~~~~~~~~
xf86Crtc.c:3256:1: warning: ‘x86_crtc_box_intersect’ defined but not used [-Wunused-function]
x86_crtc_box_intersect(BoxPtr dest, BoxPtr a, BoxPtr b)
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
UDL (usb) devices are blacklisted because of they weird behaviour when
it comes to vblank events. As EVDI uses very similar model of handling
vblanks it should be treated similarly.
When doing a page flip, EVDI does not wait for real vblank, but
simulates it by adding constant delay. It also does not support
DRM_IOCTL_WAIT_VBLANK.
In contrast to UDL, EVDI uses platform devices, thus instead of 'usb' in
path they all have 'platform'.
It is possible to blacklist by 'platform', so without explicitly saying
'evdi', but it might be misleading when it comes to real reason for it.
Signed-off-by: Dawid Kurek <dawid.kurek@displaylink.com>
Makes it easer to follow if 8 is between 7 and 9 ;-)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
By having it as a custom_target with build_always, every "ninja -C
build" would rebuild Xorg for the new date/time, even if the rest of
Xorg didn't change.
We could build the rest of Xorg into a static lib, and regenerate
date/time when the static lib changes and link that into a final Xorg,
but BUILD_DATE/TIME is such a dubious feature (compared to including a
git sha, which is easy with meson) it doesn't seem worth the build
time cost.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
There were two bugs here: The comparison function was not stable when
one or more of the drivers being compared is a fallback, and the last
driver in the list would never be moved.
Signed-off-by: Adam Jackson <ajax@redhat.com>
libdrm's busid matching for the legacy three-integer bus string format
simply ignores the domain number, rather than what we were doing here of
packing the domain into the bus number. Whatever, just use the existing
code to build a busid string, since that gets the domain right.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Copied from Mesa with no modifications.
Gives us Coffee Lake and Cannon Lake PCI IDs.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
We had a bug reported with a touchscreen where we could end up
in here with a NULL cursor, so let's not crash the X server.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-and-Tested-by: Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86str.h is parsed into sdksyms unconditionally but the symbol is only
defined when building with PCI support. Move the decl to a header that
sdksyms only parses when building PCI support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
This symbol is used by some DRI2+ drivers and there's nothing
DRI1-specific about it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
It was attempting to use the <bus>@<domain> format accepted by the BusID
stanza, but the two values were swapped.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The PCI domain has to be specified like this:
"PCI:<bus>@<domain>:<device>:<function>"
Example before:
(--) PCI:*(0:0:1:0) 1002:130f:1043:85cb [...]
(--) PCI: (0:1:0:0) 1002:6939:1458:229d [...]
after:
(--) PCI:*(0@0:1:0) 1002:130f:1043:85cb [...]
(--) PCI: (1@0:0:0) 1002:6939:1458:229d [...]
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Don't build BSD ossupport when there is no specific support, build stubs
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
The client could have said anything here, and if what they said doesn't
actually name an atom NameForAtom() will return NULL, and strcmp() will
be unhappy about that.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the default behaviour was changed from clone mode to horizontal
extended layout, a boolean ScrnInfoRec member preferClone was introduced
to choose the old default behaviour. Option "PreferCloneMode" allows
setting this preferClone member.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
All that was left here was updating the FBO's size. However, the FBO
size was always set correctly already through
glamor_set_pixmap_texture() from whoever had attached a new BO to the
pixmap.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Commit aa6717ce2 switched xf86WaitForInput from using select(2) to using
poll(2). Before this change, the timeout was interpreted as being in
microseconds; afterwards it is fed directly to xorg_poll which interprets
it as being in milliseconds. This results in the function potentially
blocking 1000x longer than intended. This commit scales down the timeout
argument before passing it to xorg_poll, being careful to ensure the result
is not rounded down due to integer division.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
./hw/xfree86/common/xf86pciBus.c: In function ‘xf86MatchDriverFromFiles’:
../hw/xfree86/common/xf86pciBus.c:1330:52: warning: ‘snprintf’ output may be
truncated before the last format character [-Wformat-truncation=]
snprintf(path_name, sizeof(path_name), "%s/%s", ^~~~~~~
../hw/xfree86/common/xf86pciBus.c:1330:13: note: ‘snprintf’ output between 2
dirent->d_name is 256, so sprintf("%s/%s") into a 256 buffer gives us:
and 257 bytes into a destination of size 256
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The glamor_egl module that the GLAMOR paths are using is only built if
GLAMOR_HAS_GBM is true, and there's no plan for implementing the
module without GBM. Simplify modesetting's code as a result.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Because we can use a shared lib in dlsym() for the symbol loader test,
but we can't use the executable.
v2: Drop a stray ' ' and rebase on 820a4cbe9f, by anholt
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Whatever problem this is trying to fix, we don't care. Just include the
thing and stop worrying about whether _POSIX_SOURCE is defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
gcc -std=c99 does not define the former, and it's a horrible namespace
confusion anyway.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add options for DRI{1,2,3}
shmfence is required for DRI3
libdrm is required for any DRI{1,2,3}
Consolidate calls to dependency('libdrm')
Set WITH_LIBDRM when building with libdrm
v2:
Initialize libxserver_dri3 to []
Manually flatten libxserver, since meson doesn't (currently)
Use version_compare rather than circumloctions with dependency()
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
v2: Re-commit the patch reverted in
2388f5e583, with Aaron Plattner's
fix squashed in (by anholt).
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v1)
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Eric Anholt <eric@anholt.net>
This reverts commit 112d0d7d01.
It broke Xorg for Adam, Peter, and myself, by failing hard when a
module load failed.
Signed-off-by: Eric Anholt <eric@anholt.net>
I clearly hadn't run ninja test, since fb no longer had any of the fb
symbols in it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
glibc would like to stop declaring major()/minor() macros in
<sys/types.h> because that header gets included absolutely everywhere
and unix device major/minor is perhaps usually not what's expected. Fair
enough. If one includes <sys/sysmacros.h> as well then glibc knows we
meant it and doesn't warn, so do that if it exists.
Signed-off-by: Adam Jackson <ajax@redhat.com>
I converted Xorg when meson 0.40 came out, but fumbled my grep and
forgot that I had instances of the .extract_all_objects() workaround
in dixmods, too.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Without this, assertion failures can make life hard for users and those
trying to help them.
v2:
* Change commit log wording slightly to "can make life hard", since
apparently e.g. logind can alleviate that somewhat.
* Set default handler for SIGABRT in
hw/xfree86/common/xf86Init.c:InstallSignalHandlers() and
hw/xquartz/quartz.c:QuartzInitOutput() (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The number for it was merged to drm_mode.h in kernel 4.7, and the
output_names[] array just requires that we slot in new strings in
order.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The build defines these, so having the defaults is just a way for the
build system's configuration to get out of sync with the code.
v2: Drop #ifndefs around the other two defines.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
parser/scan.c was checking for #ifdef XCONFIGFILE and XCONFIGDIR and
defaulting to "xorg.conf", and "xorg.conf.d", so if you had changed
__XCONFIGFILE__ to anything else, it would have got out of sync.
Settle on the name without gratuitous underscores.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
E.g. because Xinerama is enabled.
Fixes crash on startup and wrong colours in that case.
Bugzilla: https://bugs.freedesktop.org/100293
Bugzilla: https://bugs.freedesktop.org/100294
Fixes: 62f4405257 ("xfree86/modes: Move gamma initialization to
xf86RandR12Init12 v2")
Tested-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Despite all the careful planning of the kernel, a link may become
insufficient to handle the currently-set mode. At this point, the
kernel should mark this particular configuration as being broken
and potentially prune the mode before setting the offending connector's
link-status to BAD and send the userspace a hotplug event. This may
happen right after a modeset or later on.
Upon receiving a hot-plug event, we iterate through the connectors to
re-apply the currently-set mode on all the connectors that have a
link-status property set to BAD. The kernel may be able to get the
link to work by dropping to using a lower link bpp (with the same
display bpp). However, the modeset may fail if the kernel has pruned
the mode, so to make users aware of this problem a warning is outputed
in the logs to warn about having a potentially-black display.
This patch does not modify the current behaviour of always propagating
the events to the randr clients. This allows desktop environments to
re-probe the connectors and select a new resolution based on the new
(currated) mode list if a mode disapeared. This behaviour is expected in
order to pass the Display Port compliance tests.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
DRM_EVENT_CONTEXT_VERSION is the latest context version supported by
whatever version of libdrm is present. modesetting was blindly asserting
it supported whatever version that may be, even if it actually didn't.
With libdrm 2.4.78, setting a higher context version than 2 will attempt
to call the page_flip_handler2 vfunc if it was non-NULL, which being a
random chunk of stack memory, it might well have been.
Set the version as 2, which should be bumped only with the appropriate
version checks.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
No driver is using these, as far as I know.
v2: Tripwire the entity hook arguments to xf86Config*Entity, fix
documentation (Eric Anholt)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than setting up a per-screen private, just conditionally
initialize ScrnInfoRec::DPMSSet based on the config options, and inspect
that to determine whether DPMS is supported.
We also move the "turn the screen back on at CloseScreen" logic into the
DPMS extension's (new) reset hook. This would be a behavior change for
the non-xfree86 servers, if any of them had non-stub DPMS support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The X Server never generates a global config.h, and instead all these
paths are including dix-config.h or xorg-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Multiple calls to xf86EdidMonitorSet (which can be triggered e.g. by
running xrandr) would potentially keep adding the same modes, causing
the Monitor->Modes list to keep growing larger and using up more memory.
Fix this by calling xf86PruneDuplicateModes after adding the modes
returned by xf86DDCGetModes. This makes sure there's only one instance
of each unique mode in the list.
v2:
* Replace semicolon with {} for empty for loop (Emil Velikov)
* Slightly tweak commit log to avoid minor inaccuracy about what
xf86PruneDuplicateModes does
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99521
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Copied from Mesa with no modifications. Gives us Geminilake PCI IDs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
There's really no reason to pretend to support this, apps hate it, all
we're doing is giving people a way to injure themselves. It doesn't work
anyway with any Radeon, any NVIDIA chip, or any Intel chip since i810.
Rip out all the logic for handling 24bpp pixmaps and framebuffers, and
silently ignore the old options that would ask for it.
The cirrus alpine driver has been updated to default to 16bpp, and both
it and the i810 driver can now use the 32->24 conversion code in shadow
if they want. All other drivers support 32bpp. Configurations that
explicitly request 24bpp in order to fit in VRAM will be broken now
though.
v2: Fix command line options to silently ignore 24bpp rather than fail
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The linemarkers in the preprocessor output from gcc5 on Cygwin have
canonicalized paths to included files (e.g. xserver/build/../include/misc.h
is canonicalized to xserver/build/include/misc.h). (see gcc svn rev 210264,
which causes the transformation performed by -fcanonical-system-headers to
be applied to all include pathnames)
These canonicalized paths won't match $topdir, so sdksyms doesn't look at
the contents of those headers for sdk exported symbols.
Workaround this by canonicalizing all the paths we consider, using readlink.
v2:
Keep a cache of readlink results so it isn't quite so dreadfully slow.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The code as written would match anything declared extern. _X_EXPORT is
what we really mean here. That's a macro, so check for what it expands
to and skip if not found.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
First, move them to the end of the struct, for marginally better cache
locality for the struct members that actually have meaning; move the
existing slots at the end of the struct up near some others with similar
meanings. Second, only keep four slots each of integer, data pointer,
and function pointer; we've rarely used this escape hatch so this is
still plenty.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Never set by the core, not used in any modern driver.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Just no.
The ddxDesign chunk removes the whole para about xf86FixPciResource,
since it turns out that function doesn't exist at all anymore.
The only drivers that reference this at all are i128 and mga, and even
then only in the non-pciaccess path.
v2:
- Update commentary about i128/mga
- Don't remove the BiosBase keyword from the config parser since that
would turn a no-op into a fatal error (Aaron Plattner)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Seriously not worth the effort of tracking this, especially now that
competent drivers don't have a limit. The sis driver does inspect this
member, but hilariously does so only so it can print the same information
as the core does.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Only mach64 and rendition actually use this feature. Everyone else just
checks it in their ValidMode hook, they can too.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We don't actually need (or intend) to keep this struct the same across
revisions.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Currently if modesetting ever fails to set a hardware cursor it will switch
to using a software cursor and never go back. Change this to only
permanently switch to a software cursor if -ENXIO is returned (which means
hardware cursors not supported), and to otherwise still try a hardware
cursor first every time a new one is set. This is needed because hardware
may be able to handle some cursors in hardware and others not, or virtual
hardware may be able to handle hardware cursors at some times and not
others.
Changes since v1, v2 and v3:
* take into account the switch to load_cursor_argb_check
* keep the permanent software cursor fall-back if -ENXIO is returned
* move parts of v3 into separate patches
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5:
- Removed parts of patch already committed as part of 14c21ea1.
- Adjusted code slightly to match surrounding code.
- Effectively reverted af916477 which is made unnecessary by this patch.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5: Updated the patch to apply to current git HEAD, split up into two
patches (server and modesetting driver) and adjusted the code slightly
to match surrounding code. I also removed the new exported function
ShowCursorCheck(), as instead just changing ShowCursor() to return Bool
should not affect its current callers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
xf86RecolorCursor() may be called directly from XRecolorCursor as well
as from xf86ScreenSetCursor(). In the latter case, the input lock is
already held, but not for the former and so we need to add a wrapper
function that acquires the input lock before performing
xf86RecolorCursor()
References: https://bugs.freedesktop.org/show_bug.cgi?id=99358
This can happen when a module fails to load:
Program received signal SIGSEGV, Segmentation fault.
UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
848 name = mod->VersionInfo->modname;
(gdb) bt
#0 UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
#1 0x00005555555ddd1b in LoadModule (module=module@entry=0x5555559c7ce0 "fbdev", options=0x0, modreq=modreq@entry=0x0, errmaj=errmaj@entry=0x7fffffffe8ec) at ../../../../hw/xfree86/loader/loadmod.c:824
#2 0x00005555555edfe9 in xf86LoadModules (list=list@entry=0x5555559dcf50, optlist=optlist@entry=0x0) at ../../../../hw/xfree86/common/xf86Init.c:1506
#3 0x00005555555ee7bc in InitOutput (pScreenInfo=pScreenInfo@entry=0x5555559abf80 <screenInfo>, argc=argc@entry=4, argv=argv@entry=0x7fffffffeb18) at ../../../../hw/xfree86/common/xf86Init.c:484
#4 0x00005555555a885c in dix_main (argc=4, argv=0x7fffffffeb18, envp=<optimized out>) at ../../dix/main.c:197
#5 0x00007ffff5d582b1 in __libc_start_main (main=0x555555593130 <main>, argc=4, argv=0x7fffffffeb18, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffeb08) at ../csu/libc-start.c:291
#6 0x000055555559316a in _start ()
Fixes: 8e83eacb9e ("loader: Remove unused path and name from ModuleDescPtr")
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
V2:
1. update comment
2. check bustype if PCI
3. configure add libdrm version check for drmGetDevice
Get PCI information from info->fd with drmGetDevice instead of
assuming the info->fd is the first entity of scrn which is not
true for multi entities scrn.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Just a waste of memory. Path was never referenced at all, and name was
only used when unloading the module; we can just as well get the
module's internal idea of its name from VersionInfo.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nobody was ever calling this with a non-null argument for subdir list or
pattern list. Having done this, InitSubdirs is only ever called with a
NULL argument, so it's really just a complicated way of duplicating the
default list; we can remove that and just walk the list directly.
The minor error code was only ever used to distinguish among two cases
of LDR_BADUSAGE. Whatever.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Callers only ever use this for a single directory anyway.
While we're at it, also move xf86DriverListFromCompile near its only
user in the X -configure code (and inline it out of existence), and
remove LoaderFreeDirList as it's unused (since X -configure is just
going to exit anyway, none of that code cares about cleanup).
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There's no reason a driver should ever care about this.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
indent(1) gets confused by function-like macros with no trailing
semicolon, which is fair enough really.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The idea here is that the driver might have once been old enough to not
have the driverFunc slot in DriverRec, with the module ABI not having
changed when it was added. That was ages ago, and drivers always declare
themselves with DriverRec not DriverRec1, so uninitialized slots will
simply be zero.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Everybody using this functionality specifies a major version, which
makes sense. If you don't care about a minor version, that's equivalent
to saying you require minor >= 0, so just say so; likewise patch level.
Likewise ABI class is always specified.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The enum has been unused since at least the removal of elfloader.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This looks like more, but only if you don't compare it to the number
pulled in by misc.h.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This API is dumb. uname(3) exists, feel free to use it, but ideally
write to the interface not to the OS. There are a couple of drivers
using this API, they could all reasonably just not.
This also removes the OS name from the loader subdirectory path search.
Having /usr/lib/xorg shared across OSes is a non-goal here.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Now that users can set the path only via LoaderSetPath(), we can simplify
things.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Afaics the argument hasn't been part of the API since the documentation
has been converted to xml with commit fc6ebe1e1d "Convert LinuxDoc
documents to DocBook/XML"
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Similar to its little brother - LoadSubModule. Currently all call sites
provide NULL anyway ;-)
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The "copying selected object files" message appears as some source
files have the same name, and some objects are included twice.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Detailed mode reports 108 mm x 68 mm which is for smaller display.
Maximum image size reports 15 cm x 10 cm which aligns with its physical
size, use this size instead.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Allow OutputClass config snippets to modify the module-path.
Note that any specified ModulePaths will be pre-pended to the normal
ModulePath. The idea behind this is that any output hardware specific
modules should have preference over the normal modules.
One use-case for this is the nvidia binary driver, this allows a
config snippet like this:
Section "OutputClass"
MatchDriver "nvidia"
Modulepath "/usr/lib64/nvidia/modules"
EndSection
To get the nvidia glx specific glx module loaded, but only when the
nvidia kernel driver is loaded.
Together with the glvnd work done recently, this allows the nouveau
+ mesa and nvidia-binary userspace stacks to co-exist on the same
system without any ldconfig / xorg.conf tweaking and the xserver will
automatically do the right thing depending on which kernel driver
(nouveau or nvidia) is loaded.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Allow using:
Option "PrimaryGPU" "yes"
In an OutputClass section to override the default primary GPU device
selection which selects the GPU used as output by the firmware.
If multiple output devices match an OutputClass section with
the PrimaryGPU option set, the first one enumerated becomes the
primary GPU.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for allowing an OutputClass section to
override the default primary GPU device selection.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for setting options in OutputClass Sections and having these
applied to any matching output devices.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make OutputClassMatches directly take a xf86_platform_device as argument,
rather then an index into xf86_platform_devices. This makes things
easier for callers which already have a xf86_platform_device pointer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
xf86MatchDevice returns a dynamically allocated list of GDevPtr-s,
free this when we're done with it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In InitOutput, if xf86HandleConfigFile returns CONFIG_NOFILE
(which it does if no config file or directory is present), the
autoconfig flag is set, causing xf86AutoConfig to be called
later on.
xf86AutoConfig calls xf86OutputClassDriverList via the
call tree:
xf86AutoConfig =>
listPossibleVideoDrivers =>
xf86PlatformMatchDriver =>
xf86OutputClassDriverList
and xf86OutputClassDriverList attempts to traverse a linked list
that is a member of the XF86ConfigRec struct pointed to by the
global xf86configptr, which is NULL at this point because the
XF86ConfigRec struct is only allocated (by xf86readConfigFile)
AFTER the config file and directory have been successfully
opened; the CONFIG_NOFILE return from xf86HandleConfigFile
occurs BEFORE the call to xf86readConfigFile which allocates
the XF86ConfigRec struct.
Rx: In read.c (for symmetry with xf86freeConfig, which already
appears in this file), add a new function xf86allocateConfig
which tests the value of xf86configptr and, if it's NULL,
allocates the XF86ConfigRec struct and deposits the pointer
in xf86configptr. In xf86Parser.h, add a prototype for the
new xf86allocateConfig function.
Back in read.c, #include "xf86Config.h". In xf86readConfigFile,
change the open-code call to calloc to a call to the new
xf86allocateConfig function.
In xf86AutoConfig.c, add a call to the new xf86allocateConfig function
to the beginning of xf86AutoConfig to make sure the XF86ConfigRec struct
is allocated.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
If we did not find any non GPU Screens, try again ignoring the notion
of any video devices being the primary device. This fixes Xorg exiting
with a "no screens found" error when using virtio-vga in a
virtual-machine and when using a device driven by simpledrm.
This is a somewhat ugly solution, but it is the best I can come up with
without major surgery to the bus and probe code.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is primarily a preparation patch for fixing the xserver exiting with
a "no screens found" error even though there are supported video cards,
due to the server not recognizing any card as the primary card.
This also fixes the (mostly theoretical) case of a platformBus capable
driver adding a device as GPUscreen before a driver which only supports
the old PCI probe method gets a chance to claim it as a normal screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If foundScreen is TRUE, then all the code below the removed if
will not execute until we reach the return foundScreen; at the
end, so this entire if block is redundant.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
xf86CheckHWCursor() would dereference sPriv without NULL checking it. If Option
"SWCursor" is specified, sPriv == NULL. In this case we should assume that HW
cursors are not supported.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit c7e8d4a6ee had already unifdef
MODESETTING_OUTPUT_SLAVE_SUPPORT but commit
9257b1252d didn't notice that.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Prior to this commit the Xorg.wrap code to detect if root rights are
necessary checked for DRM_IOCTL_MODE_GETRESOURCES succeeding *and*
reporting more then 0 output connectors.
DRM_IOCTL_MODE_GETRESOURCES succeeding alone is enough to differentiate
between old drm only cards (which need ums and thus root) and kms capable
cards.
Some hybrid gfx laptops have 0 output connectors on one of their 2 GPUs,
resulting in Xorg needlessly running as root. This commits removes the
res.count_connectors > 0 check, fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Fixes DRI2 client driver name mapping for newer AMD GPUs with the
modesetting driver, allowing the DRI2 extension to initialize.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a missing ifdef needed for --disable-glamor.
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Special case for the systemd-logind case in xfree86: when we're vt-switched
away and a device is plugged in, we get a paused fd from logind. Since we
can't probe the device or do anything with it, we store that device in the
xfree86 and handle it later when we vt-switch back. The device is not added to
inputInfo.devices until that time.
When the device is removed while still vt-switched away, the the config system
never notifies the DDX. It only runs through inputInfo.devices and our device
was never added to that.
When a device is plugged in, removed, and plugged in again while vt-switched
away, we have two entries in the xfree86-specific list that refer to the same
device node, both pending for addition later. On VT switch back, the first one
(the already removed one) will be added successfully, the second one (the
still plugged-in one) fails. Since the fd is correct, the device works until
it is removed again. The removed devices' config_info (i.e. the syspath)
doesn't match the actual device we addded tough (the input number increases
with each plug), it doesn't get removed, the fd remains open and we lose track
of the fd count. Plugging the device in again leads to a dead device.
Fix this by adding a call to notify the DDX to purge any remainders of devices
with the given config_info, that's the only identifiable bit we have at this
point.
https://bugs.freedesktop.org/show_bug.cgi?id=97928
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes but it makes it easier to remove elements from the
middle of the list (future patch).
We don't have an init call into this file, so the list is manually
initialized.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
They're identically laid-out structs but let's use the right type to search
for our desired value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Prevents the HW cursor from intermittently jumping around when the
cursor image is changed while the cursor is being moved. This is hardly
noticeable in normal operation but can be quite confusing when stepping
through these codepaths in a debugger.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
xf86CursorScreenRec::HotX/Y contain 0 for PRIME slave screens.
Fixes incorrect HW cursor position on PRIME slave screens.
Also hoist the hotspot translation out from xf86ScreenSet/MoveCursor to
xf86Set/MoveCursor, since the hotspot position is a property of the
cursor, not the screen.
v2:
* Squash patches 1 & 2 of the v1 series, since it's basically the same
problem
* Use the master screen's xf86CursorScreenRec::HotX/Y instead of
CursorRec::bits->x/yhot, since CursorRec::bits can be NULL (Hans de
Goede)
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
As of last commit all the places in our configure.ac require version
2.3.1 (released back in 2007) or later. With the latter introducing the
1.3.0 version, as returned by drmGetLibVersion.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Presently the option guards both direct and accelerated indirect GLX. As
such when one toggles it off they end up without any acceleration.
Remove the option all together until we have the time to split/rework
things.
Cc: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The option is misleading and using it leads to disabling both direct and
accelerated indirect GLX. In such cases the xserver GLX attempts to
match DRISW (IGLX) configs with the DRI2/3 ones (direct GLX) leading to
all sorts of fun experience.
Remove the option until we get a clear split and control over direct vs
indirect GLX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This change effectively reverts commit 074cf58. We were falling back from
drmModeSetCursor2() to drmModeSetCursor() whenever the first failed. This
fall-back only makes sense on pre-mid-2013 kernels which implemented the
cursor_set hook but not cursor_set2, and in this case the call to
drmModeSetCursor2() will always return -EINVAL. Specifically, a return
value of -ENXIO usually means that neither are supported.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
[hdegoede@redhat.com: initialize ret to -EINVAL]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We get multiple udev events for actions like docking a laptop into its
station or plugging a monitor to the station. By consuming as much
events as we can, we reduce the number of output re-evalutions.
I.e. having a Lenovo X250 in a ThinkPad Ultra Dock and plugging a
monitor to the station generates 5 udev events. Or having 2 monitors
attached to the station and docking the laptop generates 7 events.
It depends on the timing how many events can consumed at once.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
[hdegoede@redhat.com: Keep goto out so that we always call RRGetInfo()]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This fix is for the following xorg.conf can work:
Section "ServerFlags"
Option "AutoAddGPU" "off"
EndSection
Section "Device"
Identifier "Amd"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Intel"
Driver "modesetting"
BusID "pci:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
GPUDevice "Amd"
EndSection
Without AutoAddGPU off, modesetting DDX will also be loaded
for GPUDevice.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new platform bus code and the old PCI bus code overlap. Platform bus
can handle any type of device, including PCI devices, whereas the PCI code
can only handle PCI devices. Some drivers only support the old style
PCI-probe methods, but the primary device detection code is server based,
not driver based; so we might end up with a primary device which only has
a PCI bus-capable driver, but was detected as primary by the platform
code, or the other way around.
(The above paragraph was shamelessly stolen from Hans de Goede, and
customized.)
The latter case applies to QEMU's virtio-gpu-pci device: it is detected as
a BUS_PCI primary device, but we actually probe it first (with the
modesetting driver) through xf86platformProbeDev(). The
xf86IsPrimaryPlatform() function doesn't recognize the device as primary
(it bails out as soon as it sees BUS_PCI); instead, we add the device as a
secondary graphics card under "autoAddGPU". In turn, the success of this
automatic probing-as-GPU prevents xf86CallDriverProbe() from proceeding to
the PCI probing.
The result is that the server exits with no primary devices detected.
Commit cf66471353 ("xfree86: use udev to provide device enumeration for
kms devices (v10)") added "cross-bus" matching to xf86IsPrimaryPci(). Port
that now to xf86IsPrimaryPlatform(), so that we can probe virtio-gpu-pci
as a primary card in platform bus code.
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=93675
Signed-off-by: Kyle Guinn <elyk03@gmail.com>
[hdegoede@redhat.com: Simplify by adding 2 if conds together with &&]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A couple of memory leaks fixes and avoiding bit shifting on an
unitialized value.
[hdegoede@redhat.com: Split out some non free fixes in separate patches]
[hdegoede@redhat.com: Don't touch ancient (and weird) os/rpcauth.c code]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
dropped the providing of a pScrn->ChangeGamma callback from the xf86RandR12
code. Leaving pScrn->ChangeGamma NULL in most cases.
This triggers the BadImplementation error in xf86ChangeGamma() :
if (pScrn->ChangeGamma)
return (*pScrn->ChangeGamma) (pScrn, gamma);
return BadImplementation;
Which causes X-apps using XF86VidModeSetGamma to crash with a
X protocol error.
This commit fixes this by re-introducing the xf86RandR12ChangeGamma
helper removed by the commit and adjusting it to work with the new
combined palette / gamma code.
Fixes: b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is a preparation patch to allow easier usage of init_one_component
outside of xf86RandR12CrtcInitGamma.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
When using secondary GPU outputs the primary GPU's blockhandler
will copy changes from its framebuffer to a pixmap shared with the
secondary GPU.
In reverse prime setups the secondary GPU's blockhandler will do another
copy from the shared pixmap to its own framebuffer.
Before this commit, if the primary GPU's blockhandler would run after
the secondary GPU's blockhandler and no events were pending, then the
secondary GPU's blockhandler would not run until some events came in
(WaitForSomething() would block in the poll call), resulting in the
secondary GPU output sometimes showing stale contents (e.g. a just closed
window) for easily up to 10 seconds.
This commit fixes this by setting the timeout passed into the
blockhandler to 0 if any shared pixmaps were updated by the primary GPU,
forcing an immediate re-run of all blockhandlers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When using reverse prime we do 2 copies, 1 from the primary GPU's
framebuffer to a shared pixmap and 1 from the shared pixmap to the
secondary GPU's framebuffer.
This means that on the primary GPU side the copy MUST be finished,
before we start the second copy (before the secondary GPU's driver
starts processing the damage on the shared pixmap).
This fixes secondary outputs sometimes showning (some) old fb contents,
because of the 2 copies racing with each other, for an example of
what this looks like see:
https://fedorapeople.org/~jwrdegoede/IMG_20160915_130555.jpg
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes XRRGetOutputPrimary and xrandr not reporting a primary output after
startup. This was especially confusing when an output was explicitly
marked as primary using Option "Primary" in Section "Monitor".
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Move ms_flush_drm_events out of GLAMOR ifdef.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97586
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes glxgears running at 1 fps when fully covering a slave-output
and the modesetting driver is used for the master gpu.
Reported-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
99% of the code in ms_covering_crtc is video-driver agnostic. Add a
screen_is_ms parameter when when FALSE skips the one ms specific check,
this will allow calling ms_covering_crtc on slave GPUs.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement the CreateBuffer2 / DestroyBuffer2 / CopyRegion2 DRI2InfoRec
version 9 callbacks, this is necessary for being an offload source
provider with DRI2.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If a frontbuffer drawable already has a pixmap, make sure it was created
on the right screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently with PRIME if we detect a secondary GPU,
we switch to using SW cursors, this isn't optimal,
esp for the intel/nvidia combinations, we have
no choice for the USB offload devices.
This patch checks on each slave screen if hw
cursors are enabled, and also calls set cursor
and move cursor on all screens.
Cc: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
When a slave-output is rotated the transformation is done on the blit
from master to slave GPU, so crtc->transform_in_use is not set, but we
still need to adjust the mouse position for things to work.
This commit modifies xf86_crtc_transform_cursor_position to not rely
on crtc->f_framebuffer_to_crtc, so that it can be used with GPU screens
too and always calls it for crtcs with any form of rotation.
Note not using crtc->f_framebuffer_to_crtc means that crtc->transform
will not be taken into account, that is ok, because when we've a transform
active hw-cursors are not used and xf86_crtc_transform_cursor_position
will never get called.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
xf86_crtc_rotate_coord should be the exact inverse operation of
xf86_crtc_rotate_coord_back, but when calculating x / y for 90 / 270
degrees rotation it was using height to calculate x / width to calculate y,
instead of the otherway around.
This was likely not noticed before since xf86_crtc_rotate_coord
until now was only used with cursor_info->MaxWidth and
cursor_info->MaxHeight, which are usally the same.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The CurrentCursor is always attached to the master GPU.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The "if (pixmap) ..." block this commit removes is inside an
"if (pixmap == NULL) ..." block, so it will never execute.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Remove unused arguments from ms_covering_crtc, make it static as it is
only used in vblank.c.
While at it also change its first argument from a ScrnInfoPtr to a
ScreenPtr, this makes the next patch in this patch-set cleaner.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
glamor_fd_from_pixmap() may return a tiled bo, which is not suitable
for sharing with another GPU as tiling usually is GPU specific.
Switch to glamor_shareable_fd_from_pixmap(), which always returns a
linear bo. This fixes mis-rendering when running the mode setting
driver on the master gpu in a dual-gpu setup and running an opengl
app with DRI_PRIME=1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The common page flip handle framework can be shared with DRI2
page flip.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When Xorg gets started directly from a wayland-gdm the crtc still has the
wayland hw cursor set. Combine this with Xorg immediately falling back to
a sw cursor because a slave-output has a monitor attached at startup; and
we end up with the wayland hardware cursor overlay fixed in its last
position + the Xorg sw cursor resulting in 2 cursors.
This commit fixes this by hiding any left-over cursors when initializing
the crtc.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The modesetting driver may be driving 2 screens (slave and master
gpu), which may have different behavior wrt hardware cursor support.
So stop using static variables and instead store the hw-cursor support
related data in a per screen struct. While at it actually make it per
crtc data as in theory different crtc's could have different hw-cursor
support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
We're happily printing the error to stdout but not which module caused it...
That's in the Xorg.log but that's at least one click away.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Xorg -configure relies on the bus implementation, e.g.
xf86pciBus.c to call xf86AddBusDeviceToConfigure(). The new
xf86platformBus code does not have support for this.
Almost all drivers support both the xf86platformBus and xf86pciBus
nowadays, and the generic xf86Bus xf86CallDriverProbe() function
prefers the new xf86platformBus probe method when available.
Since the platformBus paths do not call xf86AddBusDeviceToConfigure()
this results in Xorg -configure failing with the following error:
"No devices to configure. Configuration failed.".
Adding support for the xf86Configure code to xf86platformBus.c
is non trivial and since we advise users to normally run without
any Xorg.conf at all not worth the trouble.
However some users still want to use Xorg -configure to generate a
template config file, this commit implements a minimal fix to make
things work again for PCI devices by skipping the platform
probe method when xf86DoConfigure is set.
This has been tested on a system with integrated intel graphics,
with both the intel and modesetting drivers and restores Xorg -configure
functionality on both cases.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This loop was written in a buggy style, causing a NULL driver ptr to be
passed to copyScreen(). copyScreen() only uses that to generate an
identifier string, so this is mostly harmless on systems that accept
NULL for asprintf() "%s" format. (the generated identifiers are off
by one wrt the driver names and the last one contains NULL.
For systems that don't accept NULL for '%s' this would cause a
segmentation fault when this code is used (no xorg.conf, but partial
config in xorg.conf.d for instance).
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Keith Packard <keithp@keithp.com>
In function xf86VGAarbiterScrnInit when the "pEnt->bus.type" is
BUS_PLATFORM, the "pScrn->vgaDev" won't be set, so the "pScrn->vgaDev" is
equal to zero.
The variable "rsrc_decodes" in function "xf86VGAarbiterAllowDRI" is not
initialized. So it will occur error when "pScrn->vgaDev == 0", and
"vga_count > 1". For this case, as "pScrn->vgaDev == 0", the function
"pci_device_vgaarb_get_info" will only set the value of "vga_count",
but won't set the value of "rsrc_decodes", so it will has two different
return values for function "xf86VGAarbiterAllowDRI" in different
platforms. One platform will return TRUE, as the "rsrc_decodes" 's
default value is 0, but another platform will return FALSE, as the
"rsrc_decodes" 's default value is "32767", this will cause disable
direct rendering.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96937
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Any code called from the driver ScreenInit may want to refer to
pScrn->pScreen. As the function passed to AddScreen is the first place
the DDX sees a new screen, the generic code needs to make sure that
value is set before passing control to the video driver's
initialization code.
This was found by running a driver which didn't bother to set this
value when the initial colormap was installed; xf86RandR12LoadPalette
tried to use pScrn->pScreen and crashed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97124
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
This is a problem for the libinput driver that uses the same context across
multiple devices. The driver may be halfway through setting up an input device
(and the only way to do so is to add it to libinput) when the input thread
comes in an reads events. This then causes mayhem when data is dereferenced
that hasn't been set up yet.
In my case the cause was the call to libinput_path_remove_device() inside
preinit racing with evdev_dispatch_device() handling of ENODEV. The sequence
was:
- thread 2 gets an event and calls evdev_dispatch_device()
- thread 1 calls libinput_path_remove_device() which sets the device->source
to NULL
- thread 2 reads from the fd, gets ENODEV and now removes the device->source,
dereferencing the null-pointer
This is the one I could reproduce the most, but there are other potential
pitfalls that affect any driver that uses the same fd for multiple devices.
Avoid all this and wrap PreInit into the lock.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If a device couldn't be enabled we left the lock hanging.
This patch also removes the leftover OsReleaseSignals() call, now unnecessary.
Note that input_unlock() is later than previously OsReleaseSignals().
RemoveDevice() manipulates the input device and its file descriptors, it's
safer to put the input_unlock() call after RemoveDevice() to avoid events
coming in while the device is being removed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Just use the RandR gamma ramp directly.
Fixes random on-monitor colours with drivers which don't call
xf86HandleColormaps, e.g. modesetting.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97154
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Embarassingly, it looks like I introduced this dead function in
commit 13c7d53df8 a year ago.
Nothing ever used it, not even then.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead of breaking the former when the driver supports the latter,
hook them up so that the hardware LUTs reflect the combination of the
current colourmap and gamma states. I.e. combine the colourmap, the
global gamma value/ramp and the RandR 1.2 per-CRTC gamma ramps into one
combined LUT per CRTC.
Fixes e.g. gamma sliders not working in games.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27222
v2:
* Initialize palette_size and palette struct members, fixes crash on
server startup.
v3:
* Free randrp->palette in xf86RandR12CloseScreen, fixes memory leak.
v4:
* Call CMapUnwrapScreen if xf86RandR12InitGamma fails (Emil Velikov).
* Still allow xf86HandleColormaps to be called with a NULL loadPalette
parameter in the xf86_crtc_supports_gamma case.
v5:
* Clean up inner loops in xf86RandR12CrtcComputeGamma (Keith Packard)
* Move palette update out of per-CRTC loop in xf86RandR12LoadPalette
(Keith Packard)
v6:
* Handle reallocarray failure in xf86RandR12LoadPalette (Keith Packard)
Reviewed-by: Keith Packard <keithp@keithp.com>
This would normally return the same values the core RandR code passed to
xf86RandR12CrtcSetGamma before, which is rather pointless. The only
possible exception would be if a driver tried initializing
crtc->gamma_red/green/blue to reflect the hardware LUT state on startup,
but that can't work correctly if whatever set the LUT before the server
started was running at a different depth.
Even the pointless round-trip case will no longer work with the
following change.
Reviewed-by: Keith Packard <keithp@keithp.com>
RRCrtcGammaSetSize cannot be used yet in xf86InitialConfiguration,
because randr_crtc isn't allocated yet at that point, but a following
change will require RRCrtcGammaSetSize to be called from
xf86RandR12CrtcInitGamma.
v2:
* Bail from xf86RandR12CrtcInitGamma if !crtc->funcs->gamma_set (Keith
Packard)
Reviewed-by: Keith Packard <keithp@keithp.com>
This uses the wrapper in case we need to emulate poll with select
as we do on Windows.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ATTR_KEY maps to ID_INPUT_KEY which is set for any device with keys.
ID_INPUT_KEYBOARD and thus ATTR_KEYBOARD is set for devices that are actual
keyboards (and have a set of expected keys).
Hand-written match rules may only apply ID_INPUT_KEYBOARD, so make sure we
match on that too.
Arguably we should've been matching on ATTR_KEYBOARD only all along but
changing that likely introduces regressions.
Reported-by: Marty Plummer <netz.kernel@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This error code can mean we're submitting more rects at once than the
driver can handle. If that happens, resubmit one at a time.
v2: Make the rect submit loop more error-proof (Walter Harms)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is a cleanup, proposed by Adam Jackson, but wasn't merged with
the original NotifyFD changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Remove code in xf86Wakeup for dealing with other input and switch to
using the new NotifyFd interface.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This new libXfont API eliminates exposing internal X server symbols to
the font library, replacing those with a struct full of the entire API
needed to use that library.
v2: Use libXfont2 instead of libXfont_2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The intent here was that fallback drivers would be at the end of the
list in order, but if a fallback driver happened to be at the end of the
list already that's not what would happen. Rather than open-code
something smarter, just use qsort.
Note that qsort puts things in ascending order, so somewhat backwardsly
fallbacks are greater than native drivers, and vesa is greater than
modesetting.
v2: Use strcmp to compare non-fallback drivers so we get a predictable
result if your libc's qsort isn't stable (Keith Packard)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
/dev/vc/0 is a devfs thing which is long dead, so stop trying to open
/dev/vc/0, besides being a (small) code cleanup this will also fix the
"parse_vt_settings: Cannot open /dev/tty0 (%s)\n" error message to
display the actual error, rather then the -ENOENT from also trying
/dev/vc/0.
BugLink: https://patchwork.freedesktop.org/patch/8768/
Reported-by: Chad Versace <chad.versace@linux.intel.com>
Suggested-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Commit 80e64dae: "modesetting: Implement PRIME syncing as a sink" originally was
supposed to have this line, but it was dropped as part of the merge process.
Foregoing the NULL assignment causes a ton of problems with dereferencing
uninitialized memory.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
In newer laptops with switchable graphics, the GPU may have 0 outputs,
in this case the modesetting driver should still load if the GPU is
SourceOffload capable, so that it can be used as an offload source provider.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
When a card has import capability it can be an offload _sink_, not
a source and vice versa for export capability.
This commit fixes the modesetting driver to properly set these
capabilities, this went unnoticed sofar because most gpus have both
import and export capability.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Server GPUs often have a VNC feature attached to allow remote console.
The controller implementing this feature is usually not very powerful,
and we can easily swamp it with work. This is made somewhat worse by
damage over-reporting the size of the dirty region, and a whole lot
worse by applications (or shells) that update the screen with identical
pixel content as was already there.
Fix this by double-buffering the shadow fb, using memcmp to identify
dirty tiles on each update pass. Since both shadows are in host memory
the memcmp is cheap, and worth it given the win in network bandwidth.
The tile size is somewhat arbitrarily chosen to be one cacheline wide at
32bpp on Intel Core.
By default we enable this behaviour for (a subset of) known server GPUs;
the heuristic could use work.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
24bpp front buffers tend to be the least well tested path for client
rendering. On the qemu cirrus emulation, and on some Matrox G200 server
chips, the hardware can't do 32bpp at all. It's better to just allocate
a 32bpp shadow and downconvert in the upload hook than expose a funky
pixmap format to clients.
[ajax: Ported from RHEL and separate modesetting driver, lifted kbpp
into the drmmode struct, cleaned up commit message, fixed 16bpp]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlied <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
[hdegoede@redhat.com: rebase, also use kbpp for rotate shadow fb]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
With the previous patch, the modesetting driver can now return whether
the driver supports hw cursor. However, it alone doesn't suffice,
unfortunately. drmmode_load_cursor_argb_check() is called in the
following chain:
xf86CursorSetCursor()
-> xf86SetCursor()
-> xf86DriverLoadCursorARGB()
-> xf86_load_cursor_argb()
-> xf86_crtc_load_cursor_argb()
-> drmmode_load_cursor_argb_check()
*but* at first with drmmode_crtc->cursor_up = FALSE. Then the
function doesn't actually set the cursor but returns TRUE
unconditionally. The actual call of drmmode_set_cursor() is done at
first via the show_cursor callback, and there is no check of sw cursor
fallback any longer at this place. Since it's called only once per
cursor setup, so the xserver still thinks as if the hw cursor is
supported.
This patch is an ad hoc fix to correct the behavior somehow: it does
call drmmode_set_cursor() at the very first time even if cursor_up is
FALSE, then quickly hides again. In that way, whether the hw cursor
is supported is evaluated in the right place at the right time.
Of course, it might be more elegant if we have a more proper mechanism
to fall back to sw cursor at any call path. But it'd need more
rework, so I leave this workaround as is for now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The modesetting driver still has an everlasting bug of invisible
cursor on cirrus and other KMS drivers where no hardware cursor is
supported. This patch is a part of an attempt to address it.
This patch particularly converts the current load_cursor_argb callback
of modesetting driver to load_cursor_argb_check so that it can return
whether the driver handles the hw cursor or falls back to the sw
cursor.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
[hdegoede@redhat.com: Add extra comment suggested by Kenneth]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The error value isn't always -EINVAL, e.g. the kernel drm core returns
-ENXIO when the corresponding ops doesn't exist. Without this fix,
DRM_IOCTL_MODE_CURSOR2 would be dealt as success even if it
shouldn't.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implements (Start/Stop)FlippingPixmapTracking, PresentSharedPixmap, and
RequestSharedPixmapNotifyDamage, the source functions for PRIME
synchronization and double buffering. Allows modesetting driver to be used
as a source with PRIME synchronization.
v1: N/A
v2: N/A
v3: N/A
v4: Initial commit
v5: Move disabling of reverse PRIME on sink to sink commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reverse PRIME seems to be designed with discrete graphics as a sink in
mind, designed to do an extra copy from sysmem to vidmem to prevent a
discrete chip from needing to scan out from sysmem.
The criteria it used to detect this case is if we are a GPU screen and
Glamor accelerated. It's possible for i915 to fulfill these conditions,
despite the fact that the additional copy doesn't make sense for i915.
Normally, you could just set AccelMethod = none as an option for the device
and call it a day. However, when running with modesetting as both the sink
and the source, Glamor must be enabled.
Ideally, you would be able to set AccelMethod individually for devices
using the same driver, but there seems to be a bug in X option parsing that
makes all devices on a driver inherit the options from the first detected
device. Thus, glamor needs to be enabled for all or for none until that bug
(if it's even a bug) is fixed.
Nonetheless, it probably doesn't make sense to do the extra copy on i915
even if Glamor is enabled for the device, so this is more user friendly by
not requiring users to disable acceleration for i915.
v1: N/A
v2: N/A
v3: N/A
v4: Initial commit
v5: Unchanged
v6: Rebase onto ToT
v7: NULL check and free drmVersionPtr
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
UDL (USB 2.0 DisplayLink DRM driver) and other drivers for USB transport devices
have strange semantics when it comes to vblank events, due to their inability to
get the actual vblank info.
When doing a page flip, UDL instantly raises a vblank event without waiting for
vblank. It also has no support for DRM_IOCTL_WAIT_VBLANK, and has some strange
behavior with how it handles damage when page flipping.
It's possible to get something semi-working by hacking around these issues,
but even then there isn't much value-add vs single buffered PRIME, and it
reduces maintainability and adds additional risks to the modesetting driver
when running with more well-behaved DRM drivers.
Work needs to be done on UDL in order to properly support synchronized
PRIME. For now, just blacklist it, causing RandR to fall back to
unsynchronized PRIME.
This patch originally blacklisted UDL by name, but it was pointed out that there
are other USB transport device drivers with similar limitations, so it was
expanded to blacklist all USB transport devices.
v1: N/A
v2: N/A
v3: Initial commit
v4: Move check to driver.c for consistency/visibility
v5: Refactor to accomodate earlier changes
v6: Rebase onto ToT
v7: Expand to blacklist all USB transport devices, not just UDL
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
DPMS would prevent page flip / vblank events from being raised, freezing
the screen until PRIME flipping was reinitialized. To handle DPMS cleanly,
suspend PRIME page flipping when DPMS mode is not on, and resume it when
DPMS mode is on.
v1: Initial commit
v2: Moved flipping_active check from previous commit to here
v3: Unchanged
v4: Unchanged
v5: Move flipping_active check to sink support commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Implements (Enable/Disable)SharedPixmapFlipping and
SharedPixmapNotifyDamage, the sink functions for PRIME synchronization and
double buffering. Allows modesetting driver to be used as a sink with PRIME
synchronization.
Changes dispatch_slave_dirty to flush damage from both scanout pixmaps.
Changes drmmode_set_scanout_pixmap*() functions to
drmmode_set_target_scanout_pixmap*() that take an additional parameter
PixmapPtr *target. Then, treat *target as it did prime_pixmap. This allows
me to use it to explicitly set both prime_pixmap and prime_pixmap_back
individually. drmmode_set_scanout_pixmap() without the extra parameter
remains to cover the single-buffered case, but only works if we aren't
already double buffered.
driver.c:
Add plumbing for rr(Enable/Disable)SharedPixmapFlipping and
SharedPixmapNotifyDamage.
Change dispatch_dirty_crtc to dispatch_dirty_pixmap, which functions the
same but flushes damage associated with a ppriv instead of the crtc, and
chanage dispatch_slave_dirty to use it on both scanout pixmaps if
applicable.
drmmode_display.h:
Add flip_seq field to msPixmapPrivRec to keep track of the event handler
associated with a given pixmap, if any.
Add wait_for_damage field to msPixmapPrivRec to keep track if we have
requested a damage notification from the source.
Add enable_flipping field to drmmode_crtc_private_rec to keep track if
flipping is enabled or disabled.
Add prime_pixmap_back to drmmode_crtc_private_rec to keep track of back
buffer internally.
Add declarations for drmmode_SetupPageFlipFence(),
drmmode_EnableSharedPixmapFlipping(),
drmmode_DisableSharedPixmapFlipping, drmmode_SharedPixmapFlip(), and
drmmode_SharedPixmapPresentOnVBlank().
Move slave damage from crtc to ppriv.
drmmode_display.c:
Change drmmode_set_scanout_pixmap*() functions to
drmmode_set_target_scanout_pixmap*() that take an additional parameter
PixmapPtr *target for explicitly setting different scanout pixmaps.
Add definitions for functions drmmode_SharedPixmapFlip(),
drmmode_SharedPixmapPresentOnVBlank(),
drmmode_SharedPixmapPresent(),
drmmode_SharedPixmapVBlankEventHandler(),
drmmode_SharedPixmapVBlankEventAbort(),
drmmode_EnableSharedPixmapFlipping(), and
drmmode_DisableSharedPixmapFlipping,
drmmode_InitSharedPixmapFlipping(), and
drmmode_FiniSharedPixmapFlipping, along with struct
vblank_event_args.
The control flow is as follows:
pScrPriv->rrEnableSharedPixmapFlipping() makes its way to
drmmode_EnableSharedPixmapFlipping(), which sets enable_flipping to
TRUE and sets both scanout pixmaps prime_pixmap and
prime_pixmap_back.
When setting a mode, if prime_pixmap is defined, modesetting
driver will call drmmode_InitSharedPixmapFlipping(), which if
flipping is enabled will call drmmode_SharedPixmapPresent() on
scanout_pixmap_back.
drmmode_SharedPixmapPresent() requests that for the source to
present on the given buffer using master->PresentSharedPixmap(). If
it succeeds, it will then attempt to flip to that buffer using
drmmode_SharedPixmapFlip(). Flipping shouldn't fail, but if it
does, it will raise a warning and try drmmode_SharedPixmapPresent()
again on the next vblank using
drmmode_SharedPixmapPresentOnVBlank().
master->PresentSharedPixmap() could fail, in most cases because
there is no outstanding damage on the mscreenpix tracked by the
shared pixmap. In this case, drmmode_SharedPixmapPresent() will
attempt to use master->RequestSharedPixmapNotifyDamage() to request
for the source driver to call slave->SharedPixmapNotifyDamage() in
response to damage on mscreenpix. This will ultimately call
into drmmode_SharedPixmapPresentOnVBlank() to retry
drmmode_SharedPixmapPresent() on the next vblank after
accumulating damage.
drmmode_SharedPixmapFlip() sets up page flip event handler by
packing struct vblank_event_args with the necessary parameters, and
registering drmmode_SharedPixmapVBlankEventHandler() and
drmmode_SharedPixmapVBlankEventAbort() with the modesetting DRM
event handler queue. Then, it uses the drmModePageFlip() to flip on
the next vblank and raise an event.
drmmode_SharedPixmapPresentOnVBlank() operates similarly to
drmmode_SharedPixmapFlip(), but uses drmWaitVBlank() instead of
drmModePageFlip() to raise the event without flipping.
On the next vblank, DRM will raise an event that will ultimately be
handled by drmmode_SharedPixmapVBlankEventHandler(). If we flipped,
it will update prime_pixmap and prime_pixmap_back to reflect that
frontTarget is now being displayed, and use
drmmode_SharedPixmapPresent(backTarget) to start the process again
on the now-hidden shared pixmap. If we didn't flip, it will just
use drmmode_SharedPixmapPresent(frontTarget) to start the process
again on the still-hidden shared pixmap.
Note that presentation generally happens asynchronously, so with
these changes alone tearing is reduced, but we can't always
guarantee that the present will finish before the flip. These
changes are meant to be paired with changes to the sink DRM driver
that makes flips wait on fences attached to dmabuf backed buffers.
The source driver is responsible for attaching the fences and
signaling them when presentation is finished.
Note that because presentation is requested in response to a
vblank, PRIME sources will now conform to the sink's refresh rate.
At teardown, pScrPriv->rrDisableSharedPixmapFlipping() will be
called, making its way to drmmode_FiniSharedPixmapFlipping().
There, the event handlers for prime_pixmap and prime_pixmap_back
are aborted, freeing the left over parameter structure. Then,
prime_pixmap and prime_pixmap back are unset as scanout pixmaps.
Register and tear down slave damage per-scanout pixmap instead of
per-crtc.
v1: Initial commit
v2: Renamed PresentTrackedFlippingPixmap to PresentSharedPixmap
Renamed flipSeq to flip_seq
Warn if flip failed
Use SharedPixmapNotifyDamage to retry on next vblank after damage
v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and
(rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec
Do damage tracking on both scanout pixmaps
v4: Tweaks to commit message
v5: Revise for internal storage of prime pixmap ptrs
Move disabling for reverse PRIME from source commit to here
Use drmmode_set_target_scanout_pixmap*() to set scanout pixmaps
internally to EnableSharedPixmapFlipping().
Don't support flipping if ms->drmmode.pageflip == FALSE.
Move flipping_active check to this commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
ms->drmmode.pageflip was only loaded from options if ms->drmmode.glamor was
defined, otherwise it would always assume FALSE.
PRIME Synchronization requires ms->drmmode.pageflip even if we aren't using
glamor, so load it unconditionally.
v1: N/A
v2: N/A
v3: N/A
v4: N/A
v5: Initial commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
drmmode_set_scanout_pixmap_(cpu/gpu) would only do teardown if ppix ==
NULL. This meant that if there were consecutive calls to
SetScanoutPixmap(ppix != NULL) without calls to SetScanoutPixmap(ppix ==
NULL) in between, earlier calls would be leaked. RRReplaceScanoutPixmap()
does this today.
Instead, when setting a scanout pixmap, always do teardown of the existing
scanout pixmap before setting up the new one. Then, if there is no new one
to set up, stop there.
This maintains the previous behavior in all cases except those with
multiple consecutive calls to SetScanoutPixmap(ppix != NULL).
v1: N/A
v2: N/A
v3: N/A
v4: N/A
v5: Initial commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
modesetting relied on randr_crtc->scanout_pixmap being consistent with
calls to SetScanoutPixmap, which is very fragile and makes a lot of
assumptions about the caller's behavior.
For example, RRReplaceScanoutPixmap(), when dropping off with !size_fits,
will set randr_crtc->scanout_pixmap = NULL and then call SetScanoutPixmap.
Without this patch, drmmode_set_scanout_pixmap_(cpu/gpu) will think that
there is no scanout pixmap to tear down, because it's already been set to
NULL.
By keeping track of the scanout pixmap in its internal state, modesetting
can avoid these types of bugs and reduce constraints on calling
conventions.
v1: N/A
v2: N/A
v3: N/A
v4: N/A
v5: Initial commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Changes PRIME to use double buffering and synchronization if all required
driver functions are available.
rrcrtc.c:
Changes rrSetupPixmapSharing() to use double buffering and
synchronization in the case that all required driver functions are
available. Otherwise, falls back to unsynchronized single buffer.
Changes RRCrtcDetachScanoutPixmap() to properly clean up in the case of
double buffering.
Moves StopPixmapTracking() from rrDestroySharedPixmap() to
RRCrtcDetachScanoutPixmap().
Changes RRReplaceScanoutPixmap() to fail if we are using double buffering,
as it would need a second ppix parameter to function with double buffering,
and AFAICT no driver I've implemented double buffered source support in uses
RRReplaceScanoutPixmap().
randrstr.h:
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME
double buffering.
xf86Crtc.h:
Adds current_scanout_back to _xf86Crtc to facilitate detection
of changes to it in xf86RandR12CrtcSet().
xf86RandR12.c:
Changes xf86RandR12CrtcSet() to detect changes in
scanout_pixmap_back.
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME double
buffering.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and
(rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec
Add fallback if flipping funcs fail
v4: Detach scanout pixmap when destroying scanout_pixmap_back, to avoid
dangling pointers in some drivers
v5: Disable RRReplaceScanoutPixmap for double-buffered PRIME, it would need an
ABI change with support for 2 pixmaps if it were to be supported, but AFAICT
no driver that actually supports double-buffered PRIME uses it.
Refactor to use rrEnableSharedPixmapFlipping() as a substitute for
rrCrtcSetScanoutPixmap() in the flipping case.
Remove extraneous pSlaveScrPriv from DetachScanoutPixmap()
Remove extraneous protopix and pScrPriv from rrSetupPixmapSharing()
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Consolidate to a single if/else statement and eliminate the redundant
local variable in_range and assignments to x/y.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The driver can now specify exactly which aspects of the transform it
wants to handle via XF86DriverTransform* flags.
Since the driver can now choose whether it wants to receive transformed
or untransformed cursor coordinates, xf86CrtcTransformCursorPos no
longer needs to be available to drivers, so make it static.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Even if the driver is handling the transform, we still need to transform
the cursor position for clipping, otherwise we may hide the HW cursor
when the cursor is actually inside the area covered by the CRTC.
v2: Use crtc_x/y local variables for clarity
Reviewed-by: Adam Jackson <ajax@redhat.com>
[fix copied from 40191d82370e in xf86-video-ati]
Without this, we end up setting rotated CRTCs back to their previous
framebuffer right after we perform a rotation. Reproducer:
- Have two monitors connected at the same resolution
- Rotate one monitor from normal straight to inverted
- Watch as the monitor you didn't rotate either freezes or shows intense
flickering
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If we're doing reverse-prime; or doing rotation the main fb is not used,
and there is no reason to add it in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
drmmode_set_mode_major() is the only user of drmmode->fb_id and will
create it if necessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This ensures the fb gets re-added when a shared pixmap is re-used for
a second drmmode_set_scanout_pixmap_cpu call.
Note currently the xserver never re-uses a shared pixmap in this way,
so this is mostly a sanity fix.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
drmmode_set_scanout_pixmap_gpu(pix) adds drmmod->fb_id through a call
to drmmode_xf86crtc_resize(), but on a subsequent
drmmode_set_scanout_pixmap_gpu(NULL) it would not remove the fb.
This keeps the crtc marked as busy, which causes the dgpu to not
being able to runtime suspend, after an output attached to the dgpu
has been used once. Which causes burning through an additional 10W
of power and the laptop to run quite hot.
This commit adds the missing remove fb call, allowing the dgpu to runtime
suspend after an external monitor has been plugged into the laptop.
Note this also makes drmmode_set_scanout_pixmap_gpu(NULL) match the
behavior of drmmode_set_scanout_pixmap_cpu(NULL) which was already
removing the fb.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
As documented in xorg.conf(5), a value of ConstantDeceleration between 0
and 1 will speed up the pointer. However, values less than 1 actually
had no effect. Fix this.
Note that this bug only affected "ConstantDeceleration" as configured
through xorg.conf, not "Device Accel Constant Deceleration" as configured
through xinput. The property handler AccelSetDecelProperty() also did
not need to be changed, as it did not limit the values of the property.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=92766
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We want to notice that it's set, but still pass it through to dix.
Return 0 to indicate this.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
A new --with-fallback-input-driver=foo option allows selecting a
fallback driver for the server if the driver configured for the device
is not found. Note that this only applies when the device has a driver
assigned and that module fails to load, devices without a driver are
ignored as usual.
This avoids the situation where a configuration assigns e.g. the
synaptics driver but that driver is not available on the system,
resulting in a dead device. A fallback driver can at least provides some
functionality.
This becomes more important as we move towards making other driver true
leaf nodes that can be installed/uninstalled as requested. Specifically,
wacom and synaptics, a config that assigns either driver should be
viable even when the driver itself is not (yet) installed on the system.
It is up to the distributions to make sure that the fallback driver is
always installed. The fallback driver can be disabled with
--without-fallback-input-driver and is disabled by default on non-Linux
systems because we don't have generic drivers on those platforms.
Default driver on Linux is libinput, evdev is the only other serious
candidate here.
Sample log output:
[ 3274.421] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 3274.421] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad weird driver"
[ 3274.421] (II) LoadModule: "banana"
[ 3274.422] (WW) Warning, couldn't open module banana
[ 3274.422] (II) UnloadModule: "banana"
[ 3274.422] (II) Unloading banana
[ 3274.422] (EE) Failed to load module "banana" (module does not exist, 0)
[ 3274.422] (EE) No input driver matching `banana'
[ 3274.422] (II) Falling back to input driver `libinput'
.. server proceeds to assign libinput, init the device, world peace and rainbows
everywhere, truly what a sight. Shame about the banana though.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
Not visible in the patch, but the same stanza is repeated below inside
the #ifdef GLXEXT. There's no reason to bother with checking it if we
built without GLXEXT so remove the unconditional one.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The doc text is wrong at this point, input processing isn't going to
vary based on this, so we shouldn't say it does. The only thing this
_does_ get used for is DRI1 SwapBuffers (on everything but savage), and
if you disable it you're not going to get DRI1 at all, so we really
shouldn't even mention it.
Still, leave the option wired up to the parser so we don't break any
DRI1-driver-using setup relying on it being disabled, and so we don't
complain about unused options elsewhere.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
No longer needed now that xf86CursorResetCursor is getting called for
each CRTC configuration change.
v2: Keep xf86_reload_cursors as a deprecated empty inline function
until all drivers stop calling it. (Adam Jackson)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Fixes a crash on startup in the radeon driver's drmmode_show_cursor()
due to xf86_config->cursor == NULL, because no CRTC was enabled yet, so
xf86_crtc_load_cursor_image was never called.
(Also use scrn->pScreen instead of xf86ScrnToScreen(scrn))
v2: Set xf86_config->cursor at the beginning of xf86_load_cursor_image
instead of at the end.
Reviewed-by: Keith Packard <keithp@keithp.com>
Threaded input doesn't use SIGIO anymore, but existing drivers using
xf86BlockSIGIO and xf86ReleaseSIGIO probably want to lock the input
mutex during those operations. Provide inline functions to do this
which are marked as 'deprecated' so that drivers will get warnings
until they are changed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Oops. This didn't get removed when xfree86 was converted over to use
the input thread.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
threaded input can affect drivers that use OsBlockSIGIO when dealing
with cursors.
Signed-off-by: Keith Packard <keithp@keithp.com>
Requested-by: Peter Hutterer <peter.hutterer@who-t.net>
Use this instead of the (now deprecated) cursor pointer in the
xf86CrtcConfigRec.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Switch the XFree86 DDX over to threaded input
v2: Rewrite comment in xf86Helper about silken mouse
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When this code was called from SIGIO, saving and restoring errno could
possibly have made sense in some strange environment. Now that this
will not be called from a signal handler, there is no reason to do that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Not all display managers make it easy (or possible) to modify the
command line flags passed to the server, so add a way to get to it from
xorg.conf.
v2: Fix the FlagOptions list to not have IGLX after the terminator (Alan
Coopersmith)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This makes the cursor pointer held by xf86Cursors.c get reset to NULL
whenever the cursor isn't displayed, and means that the reference
count held in xf86Cursor.c is sufficient to cover the reference in
xf86Cursors.c.
As HideCursor may be called in the cursor loading path after
UseHWCursor or UseHWCursorARGB when HARDWARE_CURSOR_UPDATE_UNHIDDEN
isn't set in the Flags field, the setting of the cursor pointer had to
be moved to the LoadCursor paths.
LoadCursorARGBCheck gets the cursor pointer, but LoadCursorImageCheck
does not. For LoadCursorImageCheck, I added a new function,
xf86CurrentCursor, which returns the current cursor. With this new
function, we can eliminate the cursor pointer from the
xf86CrtcConfigRec, once drivers are converted over to use it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix build without --enable-glamor.
Caught by the arm tinderbox.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The destination variable is never freed, thus we even plug some memory
leaks.
v2: Rebase against updated xf86CheckPrivs() helper.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Current message was quite off "file specified must be a relative path"
and alike. Just factor it out and use "path/file" as needed.
v2: Rework error message, drop "Using default", print actual arg value.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This moves the capabilites setting to after glamor is initialised, and
enables the offload caps in cases where they work. This enables DRI2
PRIME support with modesetting.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Slave GPUs don't have a root window to set this on, so don't.
This fixes some crashes I saw just playing around.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise ms_ent_priv will return NULL and things will fall apart.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For some reason a couple of the dirty functions in driver.c used 8
spaces per tab instead of 4 like the rest of the file. Fix this to make
it more consistent and give me more room to work in ms_dirty_update in
subsequent commits.
v1: N/A
v2: N/A
v3: N/A
v4: Initial commit
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Both radeon and amdgpu don't set the mode until the first blockhandler,
this means everything should be rendered on the screen correctly by
then.
This ports this code, it also removes the tail call of EnterVT from
ScreenInit, it really isn't necessary and causes us to set a dirty mode
with -modesetting always anyways.
v2: reorder set desired modes vs block handler as done for amdgpu.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This adds support using glamor for background None.
loosely based off the amdgpu code. relies on the glamor_finish code.
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-Wlogical-op now tells us:
devices.c:1685:23: warning: logical ‘and’ of equal expressions
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
R_SP is also defined in <sys/ucontext.h> on m68k. Also remove duplicate
definitions.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Rather than 'hacking' around symbol names and providing macros such as
'Local' just fold things and make the code more readable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
... so that we can use it without the forward declaration. Plus we're
doing to reuse it in the next commit ;-)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Add the const notation to all the static storage as well as the
functions that use it - xf86getToken(), xf86getSubTokenWithTab(),
StringToToken() and xf86getStringToken().
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
All consumers have been ported to the root window callback, so this can
all be nuked.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Practically speaking, the EDID major version is never not 1.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We can call this more than once via xf86OutputSetEDID since hotplug is
actually a thing in RANDR 1.2, but xf86RegisterRootWindowProperty merely
adds the data to a list to be applied to the root at CreateWindow time,
so calls past the first (for a given screen) would have no effect until
server regen.
Once we've initialised pScrn->pScreen is filled in, so we can just set
the property directly.
v2: Removed pointless version check, deobfuscate math (Walter Harms)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
For the dri2 backend, we depend on xfree86 already, so we can walk the
options for the screen looking for a vendor string from xorg.conf. For
the swrast backend we don't have that luxury, so just say mesa. This
extension isn't really meaningful on Windows or OSX yet (since libglvnd
isn't really functional there yet), so on those platforms we don't say
anything and return BadValue for the token from QueryServerString.
v2: Use xnf* allocators when parsing options (Eric and Emil)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When the HW cursor is hidden (e.g. because xf86CursorResetCursor
triggers a switch from HW cursor to SW cursor), the driver isn't
notified of this for disabled CRTCs. If the HW cursor was shown when the
CRTC was disabled, it may still be displayed when the CRTC is enabled
again.
Prevent this by explicitly hiding the HW cursor again after setting a
mode if it's currently supposed to be hidden.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94560
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
There are no longer any loadable font modules (not that they ever did
much in the first place), so stop pretending they're a defined ABI
surface.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Was removed from the tree in:
commit f175cf45ae
Author: Olivier Fourdan <ofourdan@redhat.com>
Date: Wed Feb 10 09:34:34 2016 +0100
vidmode: move to a separate library of its own
but not removed from the Makefile, which broke 'make dist'.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Setting crtc->transformPresent to FALSE was preventing the transform
from actually taking effect and putting RandR into a confused state.
Now that the RandR 1.2 cursor code handles transforms correctly, we can
allow them to properly take effect.
Reviewed-by: Keith Packard <keithp@keithp.com>
Add xf86CursorResetCursor, which allows switching between HW and SW
cursor depending on the current state.
Call it from xf86DisableUnusedFunctions, which is called after any CRTC
configuration change such as setting a mode or disabling a CRTC. This
makes sure that SW cursor is used e.g. while a transform is in use on
any CRTC or while there are active PRIME output slaves, and enables HW
cursor again once none of those conditions are true anymore.
Reviewed-by: Keith Packard <keithp@keithp.com>
We currently don't handle transforms for the HW cursor image, so return
FALSE to signal a software cursor must be used if a transform is in use
on any CRTC.
v2: Check crtc->transformPresent instead of crtc->transform_in_use. The
latter is TRUE for rotation as well, which we handle correctly.
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch introduces a new flag ATTR_KEY for hotplugged input devices,
so we can better distinguish between real keyboards (i.e. devices with
udev property ID_INPUT_KEYBOARD="1") and other key input devices like
lid switches, power buttons, etc.
All supported hotplug backends (udev, hal, and wscons) will set both
flags ATTR_KEY and ATTR_KEYBOARD for real keyboards, but udev backend
will set ATTR_KEY, but not ATTR_KEYBOARD, for non-keyboard key input
devices (hal and wscons will set both flags in any case). With this
distinction, kdrive input hotplugging mechanism will be allowed to only
grab real keyboards, as other key input devices are currently not
supported.
In order to don't break current behaviour, this patch will replace all
ATTR_KEYBOARD occurrences with ATTR_KEY in hw/xfree86/common/xf86Xinput.c.
[ajax: Just add ATTR_KEY, don't re-number the other attributes]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
The API signature of the DIX xf86VidModeGetGammaRampSize() is now
identical to the xf86cmap's xf86GetGammaRampSize() and all it does is
actually call xf86GetGammaRampSize() so we can save one vfunc.
Remove uneeded xf86VidModeGetGammaRampSize() function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The DIX already checks for VidModePrivateKey to get the vfunc, so
checking for this again in the DDX is redundant.
Remove the redundant function xf86VidModeAvailable() from the DDX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
XVidMode extension might be useful to non hardware servers as well (e.g.
Xwayand) so that applications that rely on it (e.g. lot of older games)
can at least have read access to XVidMode.
But the implementation is very XFree86 centric, so the idea is to add
a bunch of vfunc that other non-XFree86 servers can hook up into to
provide a similar functionality.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To avoid confusion as to what belongs on the DDX and what not.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To be able to reuse the VidMode extension in a non-hardware server, the
display mode definitions need to be accessible from DIX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The mode access functions (namely VidModeCreateMode(),
VidModeCopyMode(), VidModeGetModeValue() and VidModeSetModeValue()) are
used only in xf86VidMode code and do not need to be available anywhere
else.
Remove these functions from the public VidMode API and move them as
static where they are used.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The API uses an untyped pointer (void *) where a DisplayModePtr is
expected.
Clean up the API to use the appropriate type, as DisplayModePtr is
really all that will be passed there.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
VidModeGetMonitor() is used solely in ProcXF86VidModeGetMonitor() to
get a untyped monitor pointer that is passed back straight again to
VidModeGetMonitorValue().
This is actually useless as VidModeGetMonitorValue() could as well get
the monitor from the ScreenPtr just like VidModeGetMonitor() does.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
New code passes ScreenPtr instead of the screen index.
Change the VidMode functions to take a ScreenPtr.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
As we rely on dixRegisterPrivateKey() to allocate the memory for us that
will be free automatically, we do not need the CloseScreen wrapper
anymore.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
dixRegisterPrivateKey() can allocate memory that will be freed when the
screen is teared down.
No need to calloc() and free the memory ourself using a broken ref
counting method.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This patch was motivated by the need to fix the use-after-free in
dri2ClientWake, but in doing so removes an arbitrary restriction that
limits DRI2 to only blocking the first client on each drawable. In order
to fix the use-after-free, we need to avoid touching our privates in the
ClientSleep callback and so we want to only use that external list as
our means of controlling sleeps and wakeups. We thus have a list of
sleeping clients at our disposal and can manage multiple events and
sources.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Add virtio-gpu legacy + 1.0 pci ids, allowing them to use
modesetting + glamor with dri2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In commit e43abdce96
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Feb 3 09:54:46 2016 +0000
dri2: Unblock Clients on Drawable release
we try to wake up any blocked clients at drawable destruction. But by
the time we get there, CloseDownConnection has already torn down state
that AttendClient wants to modify.
Using ClientSleep instead of IgnoreClient puts a wakeup function on a
workqueue, and the queue will be cleared for us in CloseDownClient
before (non-neverretain) resource teardown.
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the Window is destroyed by another client, such as the window
manager, the original client may be blocked by DRI2 awaiting a vblank
event. When this happens, DRI2DrawableGone forgets to unblock that
client and so the wait never completes.
Note Present/xshmfence is also suspectible to this race.
Testcase: dri2-race/manager
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
All callers of SetWindowPixmap will themselves be traversing the Window
heirarchy updating the backing Pixmap of each child and so we can forgo
doing the identical traversal inside the DRI2SetWindowPixmap handler.
Reported-by: Loïc Yhuel <loic.yhuel@gmail.com>
Link: http://lists.x.org/archives/xorg-devel/2015-February/045638.html
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This applies regardless of which DRI you're asking for. Worse, leaving
it out means breaking the config file syntax in a pointless way, since
non-DRI servers can safely just parse it and ignore it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Adds Skylake, Kabylake and Broxton allowing them to use
modesetting + glamor with dri2.
Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Fixes build errors of:
present.c: In function 'ms_do_pageflip':
present.c:410:17: error: 'drmmode_bo' has no member named 'gbm'
new_front_bo.gbm = glamor_gbm_bo_from_pixmap(screen, new_front);
^
present.c:412:22: error: 'drmmode_bo' has no member named 'gbm'
if (!new_front_bo.gbm) {
^
present.c: In function 'ms_present_check_flip':
present.c:536:36: error: 'drmmode_bo' has no member named 'gbm'
if (drmmode_crtc->rotate_bo.gbm)
^
Introduced by commit 13c7d53d
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
No real change, but if the driver is broken and doesn't provide a PreInit
function, then we don't need to worry about logind.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
InputClass sections use various MatchFoo directives to decide which device to
apply to. This usually works fine for specific snippets but has drawbacks for
snippets that apply more generally to a multitude of devices.
This patch adds a NoMatchFoo directive to negate a match, thus allowing
snippets that only apply if a given condition is not set. Specifically, this
allows for more flexible fallback driver matching, it is now possible to use a
snippet that says "assign driver foo, but only if driver bar wasn't already
assigned to it". For example:
Section "InputClass"
Identifier "libinput for tablets"
MatchIsTablet "true"
NoMatchDriver "wacom"
Driver "libinput"
EndSection
The above only assigns libinput to tablet devices if wacom isn't already
assigned to this device, making it possible to select a specific driver by
installing/uninstalling it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Since non-seat0 X servers no longer touch VTs, I believe these settings
are unnecessary.
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(Sorry for double posting)
I repost this patch because I havn't got any replies from maintainers
since I posted the initial patch back in March.
Some instructions are not emulated correctly by x86emu when they
are prefixed by the 0x66 opcode.
I've identified problems in the emulation of these intructions: ret,
enter, leave, iret and some forms of call.
Most of the time, the problem is that these instructions should push or
pop 32-bit values to/from the stack, instead of 16bit, when they are
prefixed by the 0x66 special opcode.
The SeaBIOS project aims to produce a complete legacy BIOS
implementation as well as a VGA option ROM, entirely written in C and
using the GCC compiler.
In 16bit code produced by the GCC compiler, the 0x66 prefix is used
almost everywhere. This patch is necessary to allow the SeaBIOS VGA
option ROM to function with Xorg when using the vesa driver.
SeaBIOS currently use postprocessing on the ROM assembly output to
replace the affected instruction with alternative unaffected instructions.
This is obviously not very elegant, and this fix in x86emu would be
more appropriate.
v2: - Decrement BP instead of EBP in accordance with the Intel Manual
- Assign EIP instead of IP when poping the return address from the
stack in 32-bit operand size mode in ret_far_IMM, ret_far, and iret
- When poping EFLAGS from the stack in iret in 32-bit operand size
mode, apply some mask to preserve Read-only flags.
v3: - Rebase
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
This moves the code from the platform case into
a common function, and calls that from the
other two.
v2: Emil convinced me we don't need to lookup pEnt
here, so let's not bother.
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This isn't used anywhere, so no point storing it until we need it.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Xorg.wrap includes code guarded with WITH_LIBDRM for detecting KMS drivers.
Unfortunately it is never activated since code missed to include file
which defines WITH_LIBDRM.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92894
Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove code in xf86Wakeup for dealing with device and other input and
switch to using the new NotifyFd interface.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace the block/wakeup handlers with a NotifyFd callback.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Globally replace #ifdef and #if defined usage of 'sun' with '__sun'
such that strict ISO compiler modes such as -ansi or -std=c99 can be used.
Signed-off-by: Richard PALO <richard@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
DestroyPixmap handles that just fine. This also lets us drop our use
of the manual image destruction function (Note that the radeon driver
still uses it in a similar fashion, though).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Michael Stapelberg <stapelberg@google.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The ifdef checks for XF86_CRTC_VERSION >= 3/5 are remnants from the
out-of-tree driver. Within the tree, we can rely on:
xf86Crtc.h:#define XF86_CRTC_VERSION 6
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
We calloc() output_ids. Let's free() it, too.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a bug where running the card out of PPLL's when hotplugging
another monitor would result in all of the displays going blank and
failing to work properly until X was restarted or the user switched to
another VT.
[Michel Dänzer: Pass errno instead of -ret to strerror()]
[Daniel Martin: Add \n to log message]
Picked from xf86-video-ati
7186a87 Handle failures in setting a CRTC to a DRM mode properly
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
As the code says, this is "far from complete". So far, in fact, that
it's been basically untouched for twenty years (XFree86 3.1!). As far
as I can tell it was never enabled in any XFree86 build, and certainly
has never been enabled since Xorg 7.0.
Also, K&R.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
These settings affect clients, not server, so belong there, next to
the information about how to set $DISPLAY.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Fixes DRI2 client driver name mapping for newer AMD GPUs with the
modesetting driver, allowing the DRI2 extension to initialize.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This matches the GCCUSESGAS path from the old monolith build (where that
macro was actually set), and fixes the build on modern OSX.
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
At startup the server wasn't adding devices, but nothing
was blocking hotplug devices by the look of it.
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91388
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
FatalError ends up calling xf86CloseConsole itself, so calling FatalError
from within xf86CloseConsole is not a good idea.
Make switch_to log errors using xf86Msg(X_WARNING, ...) and return success
(or failure).
This makes switch_to match the other error checking done in xf86CloseConsole
which all logs warnings and continues.
Add checking of the return value in xf86OpenConsole and call
FatalError there when switch_to fails, to preserve the error-handling
behavior of xf86OpenConsole.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1269210
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
hurd does not have any PATH_MAX limitation. misc.h provides a default value
which is fine here.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When the server is privileged, we shouldn't be passing the user's
environment directly.
Clearing the environment is recommended by the libdbus maintainers, see
https://bugs.freedesktop.org/show_bug.cgi?id=52202
v2: rename envp to empty_envp (Jeremy)
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83849
Signed-off-by: Julien Cristau <jcristau@debian.org>
Check for integer overflow before using stuff->count in a multiplication,
to avoid compiler optimizing out due to undefined behaviour, but only
after we've checked to make sure stuff->count is in the range of the
request we're parsing.
Reported-by: jes@posteo.de
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xserver/hw/xfree86/common/xf86Helper.c:1834:12: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘Atom’ [-Werror=format=]
xserver/hw/xfree86/common/xf86Helper.c:1834:12: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘Atom’ [-Werror=format=]
Atom is unfortunately unsigned long or unsigned int depending on the
architecture, so a cast is required.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Now since the installable libxf86config is gone, rename
libxf86config_internal to libxf86config.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The library used by the Xserver to read and parse the configuration file
could be built so that it culd be installed as a separate lib and used
by external programs.
Apparently there has not been any interest in this for quite a while as
this library has been broken for a long time now in the sense that it
was calling functions provided by the Xserver which were not implemented
for the external library.
Since this library is useless as it is anyway when built let's drop
support for it.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The correct refresh rate for this mode is 75, not 85.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Some ioctls may not be supported by the kernel however their failure
is non-fatal to the driver. Unfortunately we only know once we try
to execute the ioctl however the sematics of the fbdev driver API
doesn't allow upper layers to disable the call.
Instead of changing the fbdevHW driver API just disable the call to
this ioctl on the module level when detecting such a case.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Egbert Eich <eich@freedesktop.org>
The only drivers I can find that used this are the r128 and radeon DRI
drivers. r128 is dead and the radeon driver wasn't including Xorg's
compiler.h and still worked.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
When xf86RandR12Key is not set we will not get to the places where
these tests are done as the functions in question are not called.
In most cases we would have crashed before these checks anyway.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The X server frequently deals with SIGIO and SIGALRM interruptions.
If process execution is inside certain blocking system calls
when these signals arrive, e.g. with the kernel blocked on
a contended semaphore, the system calls will be interrupted.
Some system calls are automatically restartable (the kernel re-executes
them with the same parameters once the signal handler returns) but
only if the signal handler allows it.
Set SA_RESTART on the signal handlers to enable this convenient
behaviour.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
A user on a nouveau-driven card ran into a problem where DVI-D-1 and
DVI-I-1 were aliasing. The simplest fix is to provide the full connector
names. While we're at it, rename the output names to match what is in
the kernel, and start counting the connectors from 1 rather than 0. The
only deviation is HDMI vs HDMI-A, which kept its original name.
This will break backwards compatibility with existing xorg.conf's that
reference output names, but the alternative is to create a separate
counting system, further disconnecting from the kernel names.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
<termio.h> is obsolete. Using <termios.h> instead fixes building with
musl libc.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Felix Janda <felix.janda@posteo.de>
some X manuals use then escape sequence \/ when they want to render
a slash. That's bad because \/ is not a slash but an italic
correction, never producing any output, having no effect at all in
terminal output, and only changing spacing in a minor way in typeset
output.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
xorg/xserver/hw/xfree86/dri/dri.c:1695:19: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘DRIContextPrivPtr’ [-Werror=format=] ^
xorg/xserver/hw/xfree86/dri/dri.c:1695:19: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘DRIContextPrivPtr’ [-Werror=format=]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Werror=format=]
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 6 has type ‘long unsigned int’ [-Werror=format=]
Use %lu for an unsigned long
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xserver/hw/xfree86/common/xf86Events.c:183:5: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘void *’ [-Werror=format=]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Descriptions for Options PageFlip and SWCursor.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds zaphod and ZaphodHeads support
to the the in-server modesetting driver.
this is based on a request from Mario,
and on the current radeon driver, along
with some patches from Mario to bring things
up to the state of the art in Zaphod.
v2: fixup vblank fd registring.
v3: squash Mario's fixes.
modesetting: Allow/Fix use of multiple ZaphodHead outputs per x-screen.
modesetting: Take shift in crtc positions for ZaphodHeads configs into account.
modesetting: Add ZaphodHeads description to man page.
small cleanups (airlied).
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit 90db5edf11 modified the signature of
StartPixmapTrackingProcPtr, so drivers implementing that need to use the updated
definition.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Header was added in 1dba5a0b19
but not in Makefile.am, resulting in missing header in the
distribution tarball.
Signed-off-by: Eric Anholt <eric@anholt.net>
glamor_name_from_pixmap and glamor_fd_from_pixmap return CARD16 and
CARD32 values via pointers. The current code uses uint16_t and
uint32_t which will probably be the same but it's safer to use the
datatypes as specified by the function.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Also remove vidmodeproc.h from the SDK since no drivers are using it.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes modesetting when glamor is disabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Based on code by Keith Packard, Eric Anholt, and Jason Ekstrand.
v2:
- Fix double free and flip_count underrun (caught by Mario Kleiner).
- Don't leak flip_vblank_event on the error_out path (Mario).
- Use the updated ms_flush_drm_events API (Mario, Ken).
v3: Hack around DPMS shenanigans. If all monitors are DPMS off, then
there is no active framebuffer; attempting to pageflip will hit the
error_undo paths, causing us to drmModeRmFB with no framebuffer,
which confuses the kernel into doing full modesets and generally
breaks things. To avoid this, make ms_present_check_flip check that
some CRTCs are enabled and DPMS on. This is an ugly hack that would
get better with atomic modesetting, or some core Present work.
v4:
- Don't do pageflipping if CRTCs are rotated (caught by Jason Ekstrand).
- Make pageflipping optional (Option "PageFlip" in xorg.conf.d), but
enabled by default.
v5: Initialize num_crtcs_on to 0 (caught by Michel Dänzer).
[airlied: took over]
v6: merge async flip support from Mario Kleiner
free sequence after failed vblank queue
handle unflip while DPMS'ed off (Michel)
move flip tracking into its own structure, and
fix up reference counting issues, and add comments.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Since we are shipped with the server and the server has it built-in,
don't bother trying to load it.
Don't remove or invert the if statement on purpose as a later
patch adds stuff in here.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a specialization of ms_drm_abort that matches based on the drm
event queue's sequence number.
Based on code by Keith Packard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
I want to use this in present.c.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, ms_flush_drm_events() returned a boolean value, and it was
very easy to interpret the meaning incorrectly. Now, we return an
integer value.
The possible outcomes of this call are:
- poll() raised an error (formerly TRUE, now -1 - poll's return value)
- poll() said there are no events (formerly TRUE, now 0).
- drmHandleEvent() raised an error (formerly FALSE, now the negative
value returned by drmHandleEvent).
- An event was successfully handled (formerly TRUE, now 1).
The nice part is that this allows you to distinguish errors (< 0),
nothing to do (= 0), and success (1). We no longer conflate errors
with success.
v2: Change ms_present_queue_vblank to < 0 instead of <= 0, fixing an
unintentional behavior change. libdrm may return EBUSY if it's
received EINTR for more than a second straight; just keep retrying
in that case. Suggested by Jasper St. Pierre.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This adds support for reverse prime to the modesetting driver.
Reverse prime is where we have two GPUs in the display chain,
but the second GPU can't scanout from the shared pixmap, so needs
an extra copy to the on screen pixmap.
This allows modesetting to support this scenario while still
supporting the USB offload one.
v1.1:
fix comment + ret = bits (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows a glamor enabled master device to have
slave USB devices attached.
Tested with modesetting on SNB + USB.
It relies on the previous patch to export linear
buffers from glamor.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel pointed out I broke Zaphod with the initial auto add
gpu devices change,
Fix this, by only auto adding GPU devices if we are screen 0
and there are no other screens in the layout. Anyone who
wants to assign GPU devices can specify it in the xorg.conf
for this use case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Right now, Xorg does not install DBus matches for "PauseDevice" /
"ResumeDevice". Therefore, it should usually not receive those DBus
signals from logind. It is just a coincidence that systemd-logind sends
those signals in a directed manner right now. Therefore, dbus-daemon
bypasses the broadcast matches.
However, this is not ABI and Xorg should not rely on this. systemd-logind
is free to send those signals as broadcasts, in which case Xorg will
freeze the VT. Fix this by always installing those matches.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Reported-by: Jan Alexander Steffens <jan.steffens@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit fixes a small mistake in Xorg.wrap.1 .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
linux_parse_vt_settings() was split out of xf86OpenConsole so that it can
be called earlier during systemd-logind init, but it is possible to run
the xserver in such a way that xf86OpenConsole() is never used.
The FatalError calls in linux_parse_vt_settings() may stop the Xorg xserver
from working when e.g. no /dev/tty0 is present in such a setup.
This commit adds a may_fail parameter to linux_parse_vt_settings() which
can be used to make linux_parse_vt_settings() fail silenty with an error
return in this case, rather then calling FatalError().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights on any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
But the final KeepTty value is not known until the code to chose which vtno to
run on has been called, which currently happens after intializing
systemd-logind.
This commit is step 1 in fixing the "startx -- vt7" breakage, it factors out
the linux xf86OpenConsole bits which set xf86Info.vtno and keepTty so that
these can be called earlier. Calling this earlier is safe as this code has
no side effects other than setting xf86Info.vtno and keepTty.
Note this basically only moves a large chunk of xf86OpenConsole() into
linux_parse_vt_settings() without changing a single line of it, this is
hard to see in the diff because the identation level has changed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If present, access the unaccelerated valuator mask values for DGA and XI2 raw
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Fixes mmap failures with 32-bit builds.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The code in drmmode_set_cursor does not properly handle the case where
drmModeSetCursor2 returns any other error than EINVAL and silently fails to set
a cursor.
So only return when the drmModeSetCursor2 succeeds (i.e returns 0) and disable
the cursor2 usage on EINVAL.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1205725
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If no compat_output is defined, we inadvertently (attempt to) return
whatever data is at index -1. Instead, return NULL since that's what
callers are expecting.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
This adds tiling support to the server modesetting driver,
it retrieves the tile info from the kernel and translates
it into the server format and exposes the property.
v2.1: fix resetting tile property (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Adam Jackson
Dave Airlie
Julien Isorce
Jim Qu
Eric Anholt
Keith Packard
Takashi Iwai
Stefan Agner
Lyude Paul
Olivier Fourdan
Michał Górny
Matt Turner
Michel Dänzer
Bas Nieuwenhuizen
Jon Turney
Roman Gilg
Mario Kleiner
Anuj Phogat
Louis-Francis Ratté-Boulianne
Thomas Klausner
Peter Hutterer
Daniel Stone
Aaron Plattner
Emil Velikov
Thierry Reding
Tobias Klausmann
Nicolai Hähnle
Alan Coopersmith
Rodrigo Vivi
Laurent Carlier
Jeffrey Smith
Michal Srb
Rinat Ibragimov
Martin Wilck
Lukáš Krejčí
Konstantin Kharlamov
Daniel Martin
Hector Martin
Alex Goins
Nathan Kidd
Nick Sarnie
Dawid Kurek
Jason Gerecke
Julien Cristau
Frank Binns
Karol Kosik
Martin Peres
Kenneth Graunke
Michael Thayer
Chris Wilson
Qiang Yu
Emil Velikov
Mihail Konev
Kai-Heng Feng
Hans De Goede
Ben Crocker
Timo Aaltonen
Nikhil Mahale
Laszlo Ersek
Kyle Guinn
David CARLIER
Matthieu Herrb
Emily Deng
Lyude Paul
Eric Biggers
Dave Airlie
Andreas Schwab
Sonny Jiang
Evgeny M. Zubok
Laércio de Sousa
Marc-Andre Lureau
Julian Pidancet
Arkadiusz Miśkiewicz
Richard PALO
Michael Stapelberg
Samuel Thibault
Alexandr Shadchin
Egbert Eich
Ville Syrjälä
Daniel Drake
Ilia Mirkin
Felix Janda
Ingo Schwarze
Armin K
Robert Ancell
David Herrmann
Adel Gadllah
