miPaintWindow would cause fbFill() to overwrite pScreen's pixmap which was
sized for the old resolution.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
If CG reports no displays when launching, we could crash in RandR. Instead, just
provide a fake 800x600 display until we are notified about displays being attached.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
After fork()ing, we should just limit ourselves to setting up
the environment, file descriptors, and exec()ing.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Additionally removes some dead code and fixes double-locking in
xprIsX11Window. xprIsX11Window doesn't need to do any locking because
those resources are protected by the called functions themselves.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel A. Steffen <dsteffen@apple.com>
Currently, we only end up here through a call to QuartzShowFullscreen, and
this is always on the same thread. Future changes (such as further
incorporating libdispatch) may allow this to change, but contention will
remain minimal since the call is infrequent and it is short held.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel A. Steffen <dsteffen@apple.com>
It's been a few years now since we've needed this to debug thread
boundaries, so punt it out to clean up the namespace polution.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
xorg_backtrace() has been in os for two years now, we might as well
start using it.
Ref: 94ed0ba1b5
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
xprAppleWM.c:143: warning: initialization from incompatible pointer type
xprAppleWM.c:144: warning: initialization from incompatible pointer type
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Previously, we weren't always waiting the full three seconds. This should
be better, but is still sub-optimal. We really want to start processing
these once a WM has been started.
http://xquartz.macosforge.org/trac/ticket/416
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
All the implementations of makeCurrent and forceCurrent are identical,
so just use makeCurrent everywhere.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We can never hit this, because the indirect GLX dispatch code always
forces a current context and checks that it's non-NULL before calling
into the dispatch table. If it's _not_ null, then _glapi_set_context
will call into the driver, which is responsible for calling
_glapi_set_dispatch to make sure the dispatch table is non-NULL.
Also remove _glapi_set_warning_func and friends, since we can no longer
call them even from dead code.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
each DDX has its own copy, I've taken the darwin one,
though I'm not sure why it needs the pOldClip piece that nobody
else has and the commit msg is like an "Updates from magic land"
type message.
This removes the main uses of pWin->winSize from the DDXen.
v2: drop old clip like ajax suggests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the struct, but keeps InitAbsoluteClassDeviceStruct as
a no-op and preserves related struct layout.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We now support using RandR to set the resolution of the primary display (and
place a shielding window on other displays) in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
We get an XP_EVENT_DISPLAY_CHANGED event when our display configuration is
changed. If this change was caused by hotplugging a monitor or Mac Display
Preferences changes by the user, we need to call RRScreenSizeNotify in order
to ensure new connections get the correct screen size.
http://xquartz.macosforge.org/trac/ticket/460
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Following the convention makes it easier to locate man pages,
user's or developer's documentation and specifications.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create a manpages.am makefile snippet in the root dir.
Each man page makefile includes manpages.am.
Now all man pages in xserver are generated the same way
using the same method as all of other xorg modules.
All ".man.pre" files in git are ".man" now.
Links are no longer created between different file types.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is dead code which will not be used in the future.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man)
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The CoreAudio path uses deprecated API and has reported crashes that
aren't worth fixing (4e8bf12b13 fixed
one and introduced another). NSBeep() does the job just fine.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This just fixes the regression whereby we couldn't switch between the legacy
fullscreen mode and rootless on multi-monitor configurations. This was
happening because ref wasn't being set in these cases (since we don't ever
actually change CG modes), so we failed a CFEqual. Setting the references
fixes this regression and places us one step closer to more mode RandR
mode switching in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Never implemented in any open source driver. The implementation
assumed explicit DDX driver knowledge of how the client-side driver
worked, since at the time the server's GL renderer was not a DRI driver.
But now, it is, so any implementation of these should be done with
additional DRI driver API, like the swap control extension.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The version check is hackish, and I highly doubt anyone using this code is on
a version of OS X that predates this support (10.2 has support for it).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Adds three new functions
void QuartzRandRSetFakeRootless (void);
void QuartzRandRSetFakeFullscreen (void);
void QuartzRandRToggleFullscreen (void);
The first two are identical to requesting the fake modes from a RandR client
The third responds to cmd-alt-a to leave fullscreen or RandR.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Report a fake screen mode that corresponds to the screen mode at startup of the
server excluding the height of the menu bar. If a client requests this mode,
rootless mode is enabled. In all other modes, the root window is shown.
Signed-off-by: Jan Hauffa <hauffa@in.tum.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Querying and changing of resolution and refresh rate is supported,
rotation is not implemented yet.
Signed-off-by: Jan Hauffa <hauffa@in.tum.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Some functions had to be moved around due some missing static definitions.
Another minor clean up like inexistent function declarations and etc were made
also.
Part of this patch was cooked using:
sed -i -e '/static DISPATCH_PROC*.*;/d' `git ls-files`
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Jeremy deleted rootlessAccelInit's implementation in 2008 in commit
587c010a1c. Delete its prototype and the
remaining commented-out call to it.
It still makes sense for the rootless GC ops to relax the planemask, but
that's independent of the size of the operation, so quit checking the
thresholds there.
FillBytes and CompositePixels are not called anywhere, so delete
everything related to both.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
The driOps field of this structure is never set to anything but
&driGCOps, and this structure is not visible outside this source file.
Just use the constant in the one place the field was used.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We still have the issue with not raising the frontmost window for the case
when spaces is enabled, and the AppleSpacesSwitchOnActivate preference is
disabled.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
We were incorrectly NULLing out pDraw in __GLXDrawable instead of ours in
__GLXAquaDrawable. (we should refactor to eliminate this redundancy later)
This was causing http://xquartz.macosforge.org/trac/ticket/426
This was benign until commit f0006aa58f
The root cause of this change was fed7ccc481ad1caaa518cafe944c2327a5d0b6c65
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
TryClientEvents already did this; this commit just moves the assignment
one level down so that no event source has to worry about sequence
numbers.
...No event source, that is, except XKB, which inexplicably calls
WriteToClient directly for several events.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This matches the test in TryClientEvents, and is a superset of tests
done by the callers of these functions. The consequence of forgetting
these tests is a server crash, so they're always desirable. In my
opinion, it's better to not require the callers to remember to do these
checks.
For callers that don't do very much work before calling WriteToClient or
WriteEventsToClient, I've removed the redundant checks.
hw/xquartz/xpr/appledri.c has an interesting case: While its check for
"client == NULL" appears redundant with the test in WriteEventsToClient,
it dereferences client to get the sequence number.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27497
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The middle mouse clicks return erroneous values after returning from
Fast User Switching.
<rdar://problem/7979468>
http://xquartz.macosforge.org/trac/ticket/389
Signed-off-by: Martin Otte <otte@duke.edu>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Edward Moy <emoy@apple.com>
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes regression introduced in 9de0e31746
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
commit 206531f75c added localization files
for ar, add them to the Makefile.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
This should make 'Unicode Hex Input' work as an input layout.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Add $(AM_V_GEN) for sed-based rules so they appear as expected with
automake silent rules, and $(AM_V_at) to completely hide cp/ln/rm
commands which are not prone to fail.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
I'm not quite sure why this was necessary, but DDXRingBell is being called
from CoreKeyboardBell, so we don't need a separate bellProc which would
result in multiple rings.
This reverts commit 9071b0d697.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This is a variable local to configure.ac which is not AC_SUBST()
It is undefined in any generated Makefile.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The problem fixed by this patch can be reproduced on Linux with the
following steps.
- Access NULL pointer intentionally in ProcessOtherEvent on key press.
- Instead of saving core dump to a file, write it into a pipe.
echo "|/usr/sbin/my-core-dumper" > /proc/sys/kernel/core_pattern
- Dump the core by pressing a key.
While the core is being dumped into the pipe, the smart schedule timer
will cause a pending SIGALRM. Linux kernel stops writing data to the
pipe when there are pending signals. This causes the core dump to be
truncated. On my system I'm expecting a 6 MB dump but the size will be
60 kB instead. The problem is solved if we block the SIGALRM caused by
expired smart schedule timer.
I haven't been able to reproduce this problem in the following cases.
- Save core dump to a file instead of a pipe.
- kill -SEGV `pidof Xorg`
- Press a key to dump core while gdb is attached to Xorg.
- Give option -dumbSched to Xorg.
Also note that the fix works only when NoTrapSignals has the default
value FALSE. The problem can still be reproduced if error signals
aren't trapped. In addition to pending SIGALRM, there is a similar
problem with pending SIGIO from the keyboard driver during core dump.
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is half of the required changes to address the "stuck mouse pointer"
bug that occurs when X11 launches while the displays are asleep. The
remainder of the fix is part of libXplugin which needs to be updated to
send XP_EVENT_DISPLAY_CHANGED when the display wakes up. If you don't
have a recent enough libXplugin (expected in 2.5.0_beta2 or later), you
can cause this event to be sent by changing your display resolution (or
you could just start X11.app with your screens awake).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This avoids possible doing it twice which could result in incorrect
keycodes for alt due to our loss of information about its side.
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Calls RegisterResourceName to record the type name for
use by X-Resource, XACE/SELinux/XTsol, and DTrace.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Make sure to check return value before setting bitmask flags.
For most calls, just fails to init the extension. Since Xinput
already calls FatalError() on initialization failure, so does
failure to allocate Xinput's resource type.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
main.c:134: warning: no previous prototype for 'dix_main'
rootlessScreen.c: In function 'RootlessMarkOverlappedWindows':
rootlessScreen.c:434: warning: function declaration isn't a prototype
backtrace.c:51: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'int'
backtrace.c:54: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'int'
set.c: In function 'RecordSetMemoryRequirements':
set.c:413: warning: old-style function definition
set.c: In function 'RecordCreateSet':
set.c:425: warning: old-style function definition
stub.c: In function ‘main’:
stub.c:236: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
This makes us more consistent with the rest of the codebase, using xalloc/xfree
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we are id="org.x" and the launchd socket is ":0", we will claim
the socket to match the old behavior before we prefixed the
socket name with our id.
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Declare X11Controller as implementing NSTableViewDataSource.
Use selectRowIndexes:byExtendingSelection instead of selectRow:byExtendingSelection
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
There seems to be an issue in the 1.5+ server where shift-space does not
produce a space when 'keycode 57 = space' but it does when 'keycode 57 = space
space'
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
The rootless extension now directly calls some Xplugin functions, and relies
on types defined in Xplugin.h, which isn't very abstracted :-)
This patch is a start at abstracting some of the Xplugin specific stuff which
has crept into rootlessWindow.c. This has been done in a pretty mindless fashion,
without much thought as to if the additions to the generic rootless interface are
the correct ones
There is some confusion as to if RootlesscolormapCallback() returns a Bool or
xp_error_enum value (not so abstact), but I have no way of checking, of finding
out if Xplugin actually checks the result :-)
Based on patches from Colin Harrison, Jon Turney and Yaakov Selkowitz
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This lets X11.bin drop into any .app ... the Info.plist and Xquartz binary need to have it hardcoded still.
(cherry picked from commit 9ad16b8e50b13eb6d0cd20386d07aa8d7320f671)
It's deprecated in SnowLeopard. Ben and I both have no idea what it is for. It says something about unicode input, but urxvt seems fine taking in unicode, so /shrug... bye.
(cherry picked from commit 29cb904e4de2411a9b6dbe68694954788f0525f7)
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
I don't understand the *why* ... I just see that it works better this way for games like Quake2 through wine. It *should* be better the other way, but somehow it's not.
I guess this will go in my list of puzzles to unravel.
(cherry picked from commit 65ae2d00e1a53f97f2ff9522406ab69d50bf3199)
The main change is cleanup of the visualConfigs and setting up alpha correctly there to match the visuals being added earlier (so the default visual has a corresponding GLX visual)
(cherry picked from commit 7351db5c8746be30a4047469ee9b50bc19e62a89)
These events aren't really related to physical input devices anyways, so it doesn't make sense to use the pointer.
(cherry picked from commit bfe0b9cfa7af4a48dba849cab1eb152c409b4e08)
This still doesn't handle the modifier map... gotta figure out what to do now that SwitchCoreKeyboard is gone
(cherry picked from commit 427e1aab41dabb54354bfd30f2baae98ac8202c0)
This was in place to work around the issue that was correctly solved with the
previous commit (changing the Windows menu behavior). Reverting this change
no longer causes crashing, so it's safe to show the dialog now.
(cherry picked from commit 023cef31bbb2ab80a241098d82fcfd35ada75fc0)
<rdar://problem/7088335> NSApplication releases the separator in the Windows menu even though it's an IBOutlet
(cherry picked from commit 27ac5135267be9cb221329ae68461117dd43a4bf)
This should fix some issues when building on different versions of OSX. We only use extensions that OpenGL.framework's glext.h header tells us are supported.
(cherry picked from commit e10c53421f1e780573c8adcd8ea89d6ffa28a819)
This will show the quit dialog for users of other WMs.
(cherry picked from commit 639ee0c913f892776fee40bcfb856e0d7c2c7db5)
(cherry picked from commit 09432fa5b1cc8e9a30fb8aa4f8dfcd08c4a91e30)
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Virtually all callers use
XkbGetRulesDefault(&rmlvo);
InitKeyboardDeviceStruct(..., rmlvo);
Let's save them the trouble and accept NULL as a hint to take the
default RMLVO.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This happened because we put a byte in the fd to wake up dispatch, but we never actually enqueued anything in mieq because the num_events was 0.
(cherry picked from commit c21ca7558d2faf93c61f5feaafd7c878e9e21942)
Currently no code path exhibits the broken behavior since we only toggle into rootless if we don't have the root.
(cherry picked from commit 970f100ca3c5fc0662ae7658d49d118fbd9de943)
The changes actually caused all windows to move to the current space. Instead, we're going with a fix entirely within Xplugin that depends on quartz-wm being the window-manager for now.
(cherry picked from commit 997b6f3142c622541bb5bac98652abae75d1101d)
Otherwise if X11.app was activated with a mouse click, the location of the even is the last location of the cursor before X11 was deactivated
(cherry picked from commit c7457d7b31ddd2ddfd04dd6294bed4532664e1ab)
Patch courtesy of Codeweavers
Fix mouse movement tracking. For a non-window-related mouse-move event,
calculate the new position by adding the event's delta-x and delta-y values
to the previous mouse position. Do not rely on the current mouse position
because it may have been changed by a XWarpPointer call.
(cherry picked from commit 7a67935b05a475215b9bdbb959e4f7e15f32416f)
Seems we're less divorced from XKB than we'd like for now... hopefully not having any rules installed will still let us override things the way we want to...
This was causing a crash randomly, due to random memory contents.
Use xcalloc to prevent this in the future, due to future changes or mistakes.
Set the drawableType to include GLX_PIXMAP_BIT and GLX_PBUFFER_BIT.
The new libGL supports these.
Set the max Pbuffer width/height, based on the results of a test program.
We may someday want to revisit this depending on what users need, so that
we create a CGLContextObj, make it current, and call glGetIntegerv to
gather the information at runtime.
(cherry picked from commit c7e338330943e0d03a99328c740540d03f018d20)
It had a copy and paste mistake that I didn't notice. :/
It was using the CreatePixmapReq.
Also add a missing B16 to the end of the length for the DestroyPixmapReq struct.
Now the AppleDRIDestroyPixmap request seem to work.
(cherry picked from commit 295fe25bd8fa2d141291a9d9b6ef7b75fcccb4dd)
This involved wrapping some GCOps to get the proper behavior
when using X11 raster ops mixed with OpenGL (see driWrap.c).
This extends the AppleDRI protocol with create and destroy pixmap
functions.
The dri.c code has been extended quite a bit to enable this, and
to initialize the wrapping of CreateGC for GCOps.
This has been tested with tests/glxpixmap and proven to work with
the new libGL. Existing applications seem to work fine too. Redraws
all appear to be correct.
There may be some bugs lurking that I haven't found yet. I plan
to drive them out by extending the libGL test suite.
(cherry picked from commit 630518766b01022c49fe3a9e7d501808f71b06e2)
being exported correctly by Xplugin.
This should fix a bug with the surface for a window, when an export fails.
Before the export could fail and leave behind an invalid (freed) pointer in the dix privates.
I have an idea of how to fix the GLXPixmaps now without using CGLSetOffScreen.
This work is a step towards that. The Xplugin will need a small patch to fix an
issue that this change brought forth.
(cherry picked from commit 58c4116c47543b5e30c2232e7bee8efc0b9be176)
Keyboard map notifications are always generated from within XKB code,
which also takes care of copying the keysyms, etc. If you need to
mangle the keymap yourself, generate a new core keymap/modmap, and pass
it to XkbApplyMappingChange.
SendMappingNotify is renamed to SendPointerMappingNotify (and ditto its
Device variants), which still only _sends_ the notifications, as opposed
to also doing the copying a la XkbApplyMappingChange.
Also have the modmap change code traverse the device hierachy, rather
than just going off the core keyboard.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since modifierKeyMap is generated from modifierMap, just remove it, and
only generate it when we need to send the modifier map to the client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There were a few spots left in the source that were using the
--with-mesa-source defined headers or the now removed $(top_srcdir)/GL
directory. These aren't needed anymore as all the necessary source for
GLX is in $(top_srcdir)/glx.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Split DRICreateSurface into 3 functions.
Make CreateSurfaceForPixmap use xp_configure_surface. I suspect this is partly why
GLXPixmaps never worked.
It will require some more work and thoughts for pbuffers, unless we fake those with
pixmaps and surfaces.
(cherry picked from commit 9cf264e67744262b9f45079e6cd752eb3e3b0e08)
Reorder some header files and provide some types earlier on.
Remove the static __GLXextensionInfo __glDDXExtensionInfo; that isn't
used in 1.4 or 1.5, and seems to have been removed from 1.6. Remove
the data structures associated with that too.
Remove __glXAquaDrawableResize. The GLX structure doesn't use
it anymore, and the Apple version did nothing useful before.
__glXAquaDrawableSwapBuffers(): base no longer contains a drawGlxc
member. Now provide the the Apple/Aqua context in the __GLXAquaDrawable
struct. Add the context member to the __GLXAquaDrawable struct.
Remove the fallback configs. They aren't used in 1.4 or 1.5 either.
Remove init_visuals(). It's not used in 1.4 or 1.5 either.
In the drawable constructor initialize the state properly, including
the new context member.
Remove glAquaResetExtension() -- it's not used anymore.
This has been tested remotely and proven to work with glxgears,
fire, various texture programs I wrote, and various Mesa demos.
(cherry picked from commit d514152195452ae11ec7769c76489651620ad380)
rlAccel is not longer compatable, and it's not worth fixing
Don't override DeviceCursorInitialize with a noop
Don't do a SwitchCoreKeyboard (which wasn't even needed in the first place)
(cherry picked from commit c137f681680e1d04b1513a8be68aeda4d1c56fd5)
Use a __GLXconfig linked list struct to store the configurations for the
fbconfigs and visuals in a pGlxScreen.
Also, remove the __GLXvisualConfig/GlxSetVisualConfigs code that isn't used
anymore. There is more code we can remove later, but I want to do that in
separate commits.
(cherry picked from commit 94162b0f8a25267aca280d25e216cc6bde47da6e)
A better approach which ensures we have a L modifier key down if we are told neither are down and atleast one is down... =/
(cherry picked from commit bc13dda345f716bf4de9bfe4e1d85969263b60c2)
It was incorrectly blamed for some crashes a few months ago, and it should be
safe to use until we get an EXA driver to replace it.
(cherry picked from commit 8121f30bd29591fc74fbc680fbbf20210271fa58)
This old behavior was used as a workaround for the menubar behavior in the older server,
but we handle it better now and need to update our screens when we toggle the rootless
state instead.
(cherry picked from commit 508aa95bc2cd3fdc3dff448ec090919bf807d153)
Jeremy Huddleston
Keith Packard
Peter Hutterer
Emanuele Giaquinta
Nicolas Kaiser
Adam Jackson
Dave Airlie
Simon Thum
Gaetan Nadon
Chase Douglas
Jan Hauffa
Tiago Vignatti
Jamey Sharp
Matt Turner
Mikhail Gusarov
Oliver McFadden
Julien Cristau
Yaakov Selkowitz
Jeremy Huddleston
Rami Ylimaki
Dan Nicholson
Alan Coopersmith
Jeremy Huddleston
George Staplin
Daniel Stone