Commit 77658741 - "xwayland: Add buffer release callback" added an API
to deal with Wayland buffer release callbacks.
The EGLstream implementation has its own wl_buffer callback, move that
to the buffer release API instead so we don't have to deal with Wayland
buffers directly and match the other Xwayland pixmap backend
implementations.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Erik Kurzinger <ekurzinger@nvidia.com>
It runs XTS via piglit on (non-rootless) Xwayland on weston using the
headless backend.
Xwayland might use glamor if enabled in the build, but we're making sure
it uses software rendering.
v2:
* Use weston-info to wait for weston to be ready, instead of just a
fixed sleep. (Martin Peres)
v3:
* Build wayland 1.18 & weston 9.0 locally, since the packages in Debian
buster are too old for current Xwayland.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
As Xwayland is usually spawned by the Wayland server/compositor, its
command line options are not always adjustable.
Yet, if EGLStream is not supported in a given Xwayland build, the option
will do nothing (yet we must still accept it otherwise Xwayland would
refuse to run if the Wayland compositor uses it).
If Xwayland was built without support for EGLStream, there is not point
in showing the option in the help message though.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
The command line options "-shm" is used to instruct Xwayland to prefer
shared-memory for passing buffers to the Wayland server, rather than
using glamor and DRI3.
The option was there from the beginning, yet not documented in the
"-help" message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
One general assumption in Xwayland is that the xwl_window remains the
same for all the child windows of the toplevel window.
When mapping a new X11 window, ensure_surface_for_window() checks for an
existing xwl_window by using xwl_window_get() which will just check for
the registered xwl_window for the window.
That means that a client mapping a child window of an existing window
with a xwl_window will get another different xwl_window.
If an X11 client issues a Present request on the parent window, hence
placed underneath its child window of the same size, the Wayland
compositor may not send the frame callback event for the parent's
Wayland surface which is reckoned to be not visible, obscured behind
the other Wayland surface for the child X11 window.
That bug affects some games running in wine which may get 1 fps because
the repaint occurs only on timeout with a long interval (as with, e.g.
https://bugs.winehq.org/show_bug.cgi?id=47066)
Fix ensure_surface_for_window() by using xwl_window_from_window() which
will walk the window tree, so that a child window won't get another
xwl_window than its parent.
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1099
See-also: https://bugs.winehq.org/show_bug.cgi?id=47066
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When running non-rootless, Xwayland requires that the Wayland compositor
supports the XDG-WM-Base protocol.
Check for XDG-WM-Base protocol support at startup and exit cleanly if
missing rather than segfaulting later in ensure_surface_for_window()
while trying to use xdg_wm_base_get_xdg_surface().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Instead, bump the pixmap's refcount at the bottom of post_damage to
reflect the compositor's hold on the buffer, and "destroy" the pixmap in
the buffer release callback (which will dec the pixmap's refcount and
free if necessary).
Signed-off-by: Adam Jackson <ajax@redhat.com>
The EGLStream backend keeps a queue of pending streams for each Xwayland
window.
However, when this pending queue is freed, the corresponding private
data may not be cleared (typically if the pixmap for this window has
changed before the compositor finished attaching the consumer for the
window's pixmap's original eglstream), leading to a use-after-free and a
crash when trying to use that data as the window pixmap.
Make sure to clear the private data when the pending stream is freed.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1055
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Karol Szuster <karolsz9898@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using multiple window buffers crashes with EGLStream, which does not
need it anyway as this is handled through EGL directly.
Add a flag to the EGL backend to indicate whether it would benefit from
multiple buffers and use this in the get_buffer() function.
Thanks to Adam Jackson <ajax@redhat.com> for pointing out that issue
with EGLStream.
v2: Fix logical test (Adam Jackson <ajax@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The present flip does not work with the EGLStream backend. Similarly,
the EGLStream backend does not require the buffer to be flushed as
eglSwapBuffers() should take care of this.
Instead of actually checking the backend in use in the present code,
add a flag in the form of a bitfield to the EGL backend to indicate
its features and requirements.
This should not introduce any functional change.
v2: Fix logical test (Adam Jackson <ajax@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Major/minor numbers are a.. major (ha) source of pain in FreeBSD porting.
In this case, Xwayland was thinking that /dev/dri/card0 is already a render node,
because the st_rdev on FreeBSD was passing the Linux-style check,
and because of the assumption, acceleration would fail because
various ioctls like AMDGPU_INFO would be denied on the non-render node.
Switch to libdrm's function that already works correctly on all platforms.
Signed-off-by: Greg V <greg@unrelenting.technology>
Reviewed-by: Emmanuel Vadot <manu@FreeBSD.org>
We can only flip if the window pixmap matches that of the toplevel
window. Doing so regardless could cause the toplevel window pixmap to
get destroyed while it was still referenced by the window, resulting in
use-after-free and likely a crash.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1033
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
The need_rotate variable is only used once anymore and had semantics which lead
to errors in the past. In particular when negated we are dealing with a double
negation.
The variable gets replaced with a simple check on the xdg-output directly.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
This reverts commit 427f8bc009.
When receiving an output update for the mode size we need to rotate the stored
width and height values if and only if we have an xdg-output for this output
since in this case the stored values describe the output's size in logical
space, i.e. rotated.
The here reverted commit made a code change with which we would not rotate though
when an xdg-output was available since in this case the need_rotate variable was
set to False what caused in the check afterwards the first branch to execute.
That is just a small style-change to the output_get_new_size function. The
function before did take first the height and then the width argument, what
is unusual since resolutions are normally named the other way around, for
example 1920x1080. Also compare the update_screen_size function.
Therefore change the order of arguments for output_get_new_size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
We can just read out the xdg_output field of the provided xwl_output to check
if a rotation is necessary or not.
This makes the function easier to understand. Additionally some documentation
is added.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Xwayland is just a Wayland client, no X11 screensaver should be
expected to work reliably on Xwayland when running rootless because
Xwayland cannot grab the input devices so it has no way to actually
lock the screen managed by the Wayland compositor.
Turn off the screensaver on Xwayland when running rootless by setting
the screensaver timeout and interval and their default values to zero
and disable the MIT-SCREEN-SAVER extension.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1051
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of optionally return early when an event is aborted and potentially
clean it up in there we can only optionally inform Present if not aborted and
afterwards clean it up if required.
Saves some lines of code and conditional branches.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
With the newly introduced separate API method for idling a presented Pixmap in
window mode we can simplify the logic by allowing calls to it at any point in
time.
This is done by setting the flip_idler flag if the Pixmap was idled before
being presented.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Notifying Present about events' states was done prior with the single function
present_wnmd_event_notify just like in screen mode. But it is more intelligible
if at least in window mode we make use of three different functions with names
that directly indicate what their purpose is:
* present_wnmd_event_notify only for queued events feedback.
* present_wnmd_flip_notify for when a presentation occured (flip).
* present_wnmd_idle_notify for when the Pixmap of the event can be reused.
This is an API-breaking change in regards to window mode. DDX written against
the previous version won't work anymore. It is assumed that there only exists
the XWayland DDX at the moment using the window mode such that this is not an
issue for the overall ecosystem.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Rename the lists release_queue to release_list and event_list to
wait_list.
The prior names release_queue and event_list were ambiguous: in both are event-
like vblanks which can be removed from the lists in random order. In the
release_queue can be flips that are already released but still wait for the
sync or frame callback but normally the release comes later. In the event_list
are queued events waiting for a later msc.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
This (so-far) Linux-only API lets users create file descriptors purely
in memory, without any backing file on the filesystem and the race
condition which could ensue when unlink()ing it.
It also allows seals to be placed on the file, ensuring to every other
process that we won’t be allowed to shrink the contents, potentially
causing a SIGBUS when they try reading it.
This patch is best viewed with the -w option of git log -p.
This is a port of this commit from Weston:
deae98ef45Fixes#848.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
When a slave device causes the master virtual pointer device to change
device types, the device's private data pointer
(device->public.devicePrivate) is also changed to match the type of the
slave device. This can be a problem though, as tablet pad devices will
set the device's private data pointer to their own xwl_tablet_pad
struct. This can cause us to dereference the pointer as the wrong type,
and result in a segfault:
Thread 1 "Xwayland" received signal SIGSEGV, Segmentation fault.
wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at src/wayland-client.c:792
792 va_start(ap, opcode);
(gdb) bt
0 wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at
src/wayland-client.c:792
1 0x00005610b27b6c55 in wl_pointer_set_cursor (hotspot_y=0,
hotspot_x=0, surface=0x0, serial=<optimized out>, wl_pointer=<optimized
out>) at /usr/include/wayland-client-protocol.h:4610
2 xwl_seat_set_cursor (xwl_seat=xwl_seat@entry=0x5610b46d5d10) at
xwayland-cursor.c:137
3 0x00005610b27b6ecd in xwl_set_cursor (device=<optimized out>,
screen=<optimized out>, cursor=<optimized out>, x=<optimized out>,
y=<optimized out>) at xwayland-cursor.c:249
4 0x00005610b2800b46 in miPointerUpdateSprite (pDev=0x5610b4501a30) at
mipointer.c:468
5 miPointerUpdateSprite (pDev=0x5610b4501a30) at mipointer.c:410
6 0x00005610b2800e56 in miPointerDisplayCursor (pCursor=0x5610b4b35740,
pScreen=0x5610b3d54410, pDev=0x5610b4501a30) at mipointer.c:206
7 miPointerDisplayCursor (pDev=0x5610b4501a30, pScreen=0x5610b3d54410,
pCursor=0x5610b4b35740) at mipointer.c:194
8 0x00005610b27ed62b in CursorDisplayCursor (pDev=<optimized out>,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at cursor.c:168
9 0x00005610b28773ee in AnimCurDisplayCursor (pDev=0x5610b4501a30,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at animcur.c:197
10 0x00005610b28eb4ca in ChangeToCursor (pDev=0x5610b4501a30,
cursor=0x5610b4b35740) at events.c:938
11 0x00005610b28ec99f in WindowHasNewCursor
(pWin=pWin@entry=0x5610b4b2e0c0) at events.c:3362
12 0x00005610b291102d in ChangeWindowAttributes (pWin=0x5610b4b2e0c0,
vmask=<optimized out>, vlist=vlist@entry=0x5610b4c41dcc,
client=client@entry=0x5610b4b2c900) at window.c:1561
13 0x00005610b28db8e3 in ProcChangeWindowAttributes (client=0x5610b4b2c900)
at dispatch.c:746
14 0x00005610b28e1e5b in Dispatch () at dispatch.c:497
15 0x00005610b28e5f34 in dix_main (argc=16, argv=0x7ffc7a601b68,
envp=<optimized out>) at main.c:276
16 0x00007f8828cde042 in __libc_start_main (main=0x5610b27ae930 <main>,
argc=16, argv=0x7ffc7a601b68, init=<optimized out>, fini=<optimized
out>, rtld_fini=<optimized out>, stack_end=0x7ffc7a601b58) at
../csu/libc-start.c:308
17 0x00005610b27ae96e in _start () at cursor.c:1064
Simple reproducer in gnome-shell: open up an Xwayland window, press some
tablet buttons, lock and unlock the screen. Repeat if it doesn't crash
the first time.
So, let's fix this by registering our own device-specific private key
for storing a backpointer to xwl_tablet_pad, so that all input devices
have their private data pointers set to their respective xwl_seat.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <lyude@redhat.com>
In 9141196d positional coordinates were added to the damage call of pixmap
flips. The damage box coordinates are in screen space though and we need
to convert them first to surface-relative ones by substracting the origin
of the window.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Xwayland is usually spawned by the Wayland compositor which sets the
command line options.
If a command line option is not supported, Xwayland will fail to start.
That somehow makes the Xwayland command line option sort of ABI, the
Wayland compositor need to know if a particular option is supported by
Xwayland at build time.
Also, currently, Xwayland is being installed along with the rest of the
common executable programs that users may run, which is sub-optimal
because, well, Xwayland is not a common executable program, it's meant
to be a proxy between the Wayland compositor and the legacy X11 clients
which wouldn't be able to run on Wayland otherwise.
Xwayland would be better installed in `libexec` but that directory is
(purposedly) not in the user `PATH` and therefore the Wayland compositor
may not be able to find Xwayland in that case.
To solve both problems (which options are supported by Xwayland and
where to look for it), add a `pkg-config` file specifically for Xwayland
which gives the full path to Xwayland (`xwayland`) and which options it
supports (using `pkg-config` variables).
The `pkg-config` file also provides the `Version` so the build scripts
can check for a particular version if necessary.
Obviously, Wayland compositors are not required to use the `pkg-config`
file and can continue to use whatever mechanism they deem preferable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The way Xwayland works (like all Wayland clients), it first queries the
Wayland registry, set up all relevant protocols and then initializes its
own structures.
That means Xwayland will get the Wayland outputs from the Wayland
compositor, compute the physical size of the combined outputs and set
the corresponding Xwayland screen properties accordingly.
Then it creates the X11 screen using fbScreenInit() but does so by using
a default DPI value of 96. That value is used to set the physical size
of the X11 screen, hence overriding the value computed from the actual
physical size provided by the Wayland compositor.
As a result, the DPI computed by tools such as xdpyinfo will always be
96 regardless of the actual screen size and resolution.
However, if the Wayland outputs get reconfigured, or new outputs added,
or existing outputs removed, Xwayland will recompute and update the
physical size of the screen, leading to an unexpected change of DPI.
To avoid that discrepancy, use a fixed size DPI (defaults to 96, and can
be set using the standard command lime option "-dpi") and compute a
physical screen size to match that DPI setting.
Note that only affects legacy core protocols, X11 clients can still get
the actual physical output size as reported by the Wayland compositor
using the RandR protocol, which also allows for the size to be 0 if the
size is unknown or meaningless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/731
ProcVidModeGetGamma() relies on GetGamma() to initialise values if it
returns TRUE. Without this, we're sending uninitialised values to
clients.
Fixes: xorg/xserver#1040
When running with a weston session without a pointer device (thus with
the wl_seat not having a pointer) xwayland pointer warping and pointer
confining should simply be ignored to avoid crashes.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
These events aren't reachable after xwl_present_cleanup, so they're
leaked if we don't free them first.
This requires storing the pixmap pointer in struct xwl_present_window.
Luckily, the buffer pointer isn't used for anything, so just replace
that.
v2:
* Bump pixmap reference count in xwl_present_flip and drop it in
xwl_present_free_event, fixes use-after-free in the latter due to the
pixmap already being destroyed.
Reviewed-by: Dave Airlie <airlied@redhat.com>
When the linux-dmabuf protocol is available, prefer it over the old
wl_drm protocol. Previously wl_drm was used when modifiers aren't
supported, however linux-dmabuf supports formats without modifiers too.
In this case, linux-dmabuf will send a DRM_FORMAT_MOD_INVALID modifier
for each supported format [1].
This allows compositors to better handle these buffers, getting a
DMA-BUF and implementing features like direct scan-out.
A similar logic has been implemented for EGL [2].
DRM_FORMAT_MOD_INVALID is now stored in the xwl_screen->formats list.
glamor_get_modifiers still returns FALSE with zero modifiers if the
only advertised modifier is DRM_FORMAT_MOD_INVALID.
[1]: fb9b2a8731
[2]: c376865f5e
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Previously, linux-dmabuf was used unconditionally if the buffer had a
modifier. However creating a linux-dmabuf buffer with a format/modifier
which hasn't been advertised will fail.
Change xwl_glamor_gbm_get_wl_buffer_for_pixmap to use linux-dmabuf when
the format/modifier has been advertised only.
Signed-off-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1035
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This flag should only be used when the caller intends to display the
buffer on a hardware plane. Xwayland isn't a DRM client, so it doesn't
make sense to use this flag.
This change will allow the driver to potentially use buffer parameters
that are more optimized.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Without this the client library will flail around looking for a default
provider, probably one named "indirect", and that defeats the point of
having the EGL provider for direct context support in the first place.
This assumes that "mesa" will work, of course, and in general it should.
Mesa drivers will DTRT through the DRI3 setup path, and if our glamor is
atop something non-Mesa then you should fall back to llvmpipe like 1.20.
In the future it might be useful to differentiate the vendor here based
on whether glamor is using gbm or streams.
Fixes: xorg/xserver#1032
Xwayland uses the device private to point to the `xwl_seat`.
Device may be removed at any time, including on suspend.
On resume, if the DIX code ends up calling a function that requires the
`xwl_seat` such as `xwl_set_cursor()` we may end up pointing at random
data.
Make sure the clear the device private data on removal so that we don't
try to use it and crash later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
https://gitlab.freedesktop.org/xorg/xserver/issues/709
Drop GBM_BO_USE_SCANOUT from the GBM_BO_IMPORT_FD import, add
GBM_BO_USE_RENDERING to the GBM_BO_IMPORT_FD_MODIFIER import.
If the DMA-BUF cannot be scanned out, gbm_bo_import with
GBM_BO_USE_SCANOUT will fail. However Xwayland doesn't need to scan-out
the buffer and can work fine without scanout. Glamor only needs
GBM_BO_USE_RENDERING.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
In this pretty Wine/Proton specific kludge, we try to handle confining grabs
on InputOnly windows by trying to find the InputOutput window that the pointer
would get visually confined to.
The grabbing window and the visible window come from different clients, so
we used to simply resort to the pointer focus. This is troublesome though, as
the call may happen very soon at a time that the toplevel wasn't yet mapped by
the Wayland compositor, so the pointer focus may well be out of date soon.
In these situations, it does seem that even though the confining grab happens
too early to have the wayland surface mapped, the xserver view of the WindowPtr
does already reflect the size. Use this to find out the better window to
assign the confining grab to, one whose geometry fully contains the InputOnly
window's.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_seat_maybe_lock_on_hidden_cursor() checks that the value of
cursor_confinement_window is not NULL, yet there is no code path
that could lead to this.
Remove the test for cursor_confinement_window being set, it's useless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client issues a ConfinePointer wit ha hidden cursor,
Xwayland may translate that as a pointer lock.
However, if the pointer is located on another window at the time,
the request may be ignored, even if the pointer later enters the window.
To avoid that issue, check again if locking the pointer with a hidden
cursor is needed when pointer enters a surface.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client has an active grab on the pointer, all events are
reported relative to the window with the grab.
For Xwayland, if an X11 client has a grab with a pointer confinement
active, while pointer focus is on another window, motion events should
not be reported to the client with the grab, because that sets the X11
client appart, the events would be reported when the pointer is on any
X11 window but not on Wayland native surfaces.
Therefore, if the pointer is confined on a window and that window
differs from the actual pointer focus window, just pretend we lost
pointer focus to another window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If a client issues a grab on the pointer while the cursor is on another
X11 window, and then hides the cursor, we may end up locking the pointer
onto that other window.
Then a button click might end up moving the focus away from the window
which issued the grab, leaving the whole setup in a mixed up state.
Typically, if the pointer is on another X11 window, we should not try to
lock the pointer, so that it can be moved back to the window which
actually issues the grab (and hence the pointer confinement). Typically,
this is the same as an X11 client issuing a pointer grab while the
cursor is on another Wayland native window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Mutter recently added headless tests, and when running those tests the
Wayland compositor runs for a very short time.
Xwayland is spawned by the Wayland compositor and upon startup will
query the various Wayland protocol supported by the compositor.
To do so, it will do a roundtrip to the Wayland server waiting for
events it expects.
If the Wayland compositor terminates before Xwayland has got the replies
it expects, it will loop indefinitely calling `wl_display_roundtrip()`
continuously.
To avoid that issue, add a new `xwl_screen_roundtrip()` that checks for
the returned value from `wl_display_roundtrip()` and fails if it is
negative.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We were only calling xwl_present_unrealize_window for the toplevel
window, but the list can contain entries from child windows as well,
in which case we were leaving dangling pointers to freed memory.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/1000
Fixes: c5067feaee "xwayland: Use single frame callback for Present
flips and normal updates"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Recently, rooted Xwayland crashes on wlroots-based compositors, because
wlroots removed the deprecated wl_shell protocol.
This MR fixes this by changing the code in question to the xdg-shell
protocol. My motivation do this: on etnaviv-based embedded platforms,
rooted Xwayland is much faster and doesn't cause UI rendering bugs
compared to rootless Xwayland.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Since the recent fix to call xwl_output_set_window_randr_emu_props() from
ensure_surface_for_window(), it is now only called on a toplevel window,
so the is-toplevel check is not necessary for the
xwl_output_set_window_randr_emu_props() case.
This commit moves the check to xwl_output_set_randr_emu_prop_callback()
so that we only do it when we are walking over all Windows of a client
to update the property on a change of the emulated resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For window-manager managed windows, xwl_realize_window is only called for
the window-manager's decoration window and not for the actual client window
on which we should set the _XWAYLAND_RANDR_EMU_MONITOR_RECTS prop.
Usualy this is not a problem since we walk all client windows to update
the property when the resolution is changed through a randr call.
But for apps which first do the randr change and only then create their
window this does not work, and our xwl_output_set_window_randr_emu_props
call in xwl_realize_window is a no-op as that is only called for the wm
decoration window and not for the actual client's window.
This commit fixes this by making ensure_surface_for_window() call
xwl_output_set_window_randr_emu_props on the first and only child of
window-manager managed windows.
Note this also removes the non-functional xwl_output_set_window_randr_emu_props
call from xwl_realize_window, which was intended to do this, but does not
work.
This fixes apps using the ogre3d library always running at the
monitors native resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some clients, which use vidmode to change the resolution when going fullscreen,
create an override-redirect window and never trigger the screen->ResizeWindow
callback we rely on to do the xwl_window_check_resolution_change_emulation().
This causes us to not apply a viewport to them, causing the fullscreen window
to not fill the entire monitor.
This commit adds a call to xwl_window_check_resolution_change_emulation()
at the end of ensure_surface_for_window() to fix this. Note that
ensure_surface_for_window() exits early without creating an xwl_window
for new windows which will not be backed by a wayland surface and which
thus will not have an xwl_window.
This fixes ClanLib-0.6.x and alleggl-4.4.x using apps not properly
fullscreening.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The code building the mode-list does the following to deal with screen
rotation:
if (need_rotate || xwl_output->rotation & (RR_Rotate_0 | RR_Rotate_180)) {
mode_width = xwl_output->width;
mode_height = xwl_output->height;
} else {
mode_width = xwl_output->height;
mode_height = xwl_output->width;
}
This means we need to do something similar in xwl_output_set_emulated_mode()
to determine if the mode being set is the actual (not-emulated) output mode
and we this should remove any emulated modes set by the client.
All callers of xwl_output_set_emulated_mode always pass a mode pointer
to a member of xwl_output->randr_output->modes, so we do not need to
duplicate this code, instead we can simply check that the passed in mode
is modes[0] which always is the actual output mode.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not only hook the ResizeWindow method of the screen (which really is
MoveAndResize) but also hook the MoveWindow method for checking if we
need to setup a viewport for resolution change emulation.
Our resolution change emulation check if the windows origin matches
the monitors origin and the windows origin can also be changed by just
a move without being resized.
Also checking on a move becomes esp. important when we move to checking
on changes to the top-level non-window-manager client (X11)Window instead
of on changes to the xwl_window later on in this patch series.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The recent change to use the top-level non-window-manager Window drawable
coordinates from xwl_window_check_resolution_change_emulation() in
combination with only calling it on a resize when the top-level window
is moved breaks things with mutter/gnome-shell.
When fullscreening a X11 window, mutter moves its window-decoration Window
wrapping the top-level Window to the monitor's origin coordinates (e.g. 0x0)
last. This updates the top-level's drawable coordinates, but as the
actual MoveWindow is called on the wrapper Window and not on the toplevel
we do not call xwl_window_check_resolution_change_emulation() and we never
enable the viewport.
This commit fixes this by also calling
xwl_window_check_resolution_change_emulation() if the Window being moved
is an xwl_window itself.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a reparented window is resized directly check the emulation instead of
doing this only when the window manager parent window is resized, what might
never happen.
For that to work we need to make sure that we compare the current size of the
client toplevel when looking for an emulated mode.
Changes by Hans de Goede:
- Remove xwl_window x, y, width and height members as those are no longer used.
- Add check for xwl_window_from_window() returning NULL.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make window_get_none_wm_owner return the first non-wm-window instead of the
owner (client) of the first non-wm-window and rename it to
window_get_client_toplevel to match its new behavior.
This is a preparation patch for switching to using the drawable coordinates
in xwl_window_should_enable_viewport()
Changes by Hans de Goede:
- Split this change out into a separate patch for easier reviewing
- Rename window_get_none_wm_owner to window_get_client_toplevel to match
its new behavior
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An X11 window manager might add a chain of parent windows when reparenting to a
decoration window.
That is for example the case for KWin, which reparents client windows to one
decoration and another wrapper parent window.
Account for that by a recursion into the tree. For now assume as before that
all X11 window managers reparent with one child only for these parent windows.
Changes by Hans de Goede:
- Move the xwl_window_is_toplevel() from a later patch in this series here
as it really belongs together with these changes
- Drop no longer necessary xwl_window argument from window_get_none_wm_owner
parameters
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a viewport is already created we can reuse this object instead of
destroying it and getting a new one for updating the source rectangle and
destination size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of iterating over all clients which are listening for events on the
root window and checking if the client we are dealing with is the one
listening for SubstructureRedirectMask | ResizeRedirectMask events and thus
is the window-manager, cache the client-id of the window-manager in
xwl_screen and use that when checking if a client is the window-manager.
Note that we cache and compare the client-id rather then the ClienPtr,
this saves reading the ClientPtr from the global clients array when doing
the comparison.
Suggested-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Xorg supports the '-version' command line option, add something similar
to Xwayland.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/976
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
In between the two phases introduced by the previous change. This makes
sure all pending drawing to the new buffers is flushed before they're
committed to the Wayland server.
The first phase sets the new surface properties for all damaged
windows, then the second phase commits all surface updates.
This is preparatory for the next change, there should be no observable
change in behaviour (other than the order of Wayland protocol
requests).
Reviewed-by: Adam Jackson <ajax@redhat.com>
It flushes any pending drawing to the kernel, to make sure it'll be
visible to the Wayland server.
Without this, it was possible for the Wayland server to process surface
commits before Xwayland got around to flushing the corresponding
drawing, which could result in stale or even completely random window
contents being visible.
v2:
* Make EGL backend post_damage hook mandatory, don't check for NULL in
xwl_glamor_post_damage. (Olivier Fourdan)
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes build failure.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/954
Fixes: 89e32d00f6 "xwayland: Move Xwayland windows to its own sources"
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Now that each source and header should be in order, we can safely cleaup
the last remaining bits from the main `xwayland.h` which is not needed
anymore and can be removed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland GLX declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland vidmode declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland CVT declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland screen related code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland cursor declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland output declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland input declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland Present declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland generic pixmap code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Over time, Xwayland main source file `xwayland.c` has grown in size
which makes it look cluttered and harder to read.
Move the code dealing with Xwayland window to its own source and header
files.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the GLAMOR relevant declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the SHM relevant declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the Xwayland structures declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Similar to what is done in Xorg. Not doing this prevented apps from
using GLX with a Composite visual, e.g. Firefox WebRender or Chromium.
v2:
* Fix inverted direct_color test, fixes Chromium as well.
* Drop Composite extension guards, since other Xwayland code calls
compRedirectWindow/compUnredirectWindow unconditionally anyway.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/921
Fixes: 8469241592 "xwayland: Add EGL-backed GLX provider"
Reviewed-by: Adam Jackson <ajax@redhat.com> # v1
Instead of only the fallback timer.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/854
v2:
* Drop unused frame_callback member of struct xwl_present_window
(Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Using a list of Present windows that need to be called back.
This prepares for the following change, there should be no change in
observed behaviour.
v2:
* Use xwl_window_create_frame_callback instead of making the
frame_listener struct non-static (Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Damage coordinates are relative to the drawable, (0,0) being the top
left corner inside the border.
Therefore, when applying damages or accumulating damages between window
buffers, we need to take the window border width into account as well,
otherwise the updates might be only partial or misplaced.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Right now, we would recycle the window buffers whenever the window the
window is resized.
This, however, is not sufficient to guarantee that the buffers are up
to date, since changing the window border width for example would not
trigger a `WindowResize` (the border being outside the window).
Make sure we recycle the buffers on `SetWindowPixmap` to ensure that
the buffers will be recycled whenever the pixmap size is changed.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The Present code sends the idle notification event to the client after
xwl_present_flush returns. If we don't flush our GPU work here, the
client may race to draw another frame to the same buffer, so we may end
up copying (parts of) that new frame instead of the one we meant to.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/835
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Xwayland takes care of not attaching a new buffer if a frame callback is
pending.
Yet, the existing buffer (which was previously attached) may still be
updated from the X11 side, causing unexpected visual glitches to the
buffer.
Add multiple buffering to the xwl_window and alternate between buffers,
to leave the Wayland buffer untouched between frame callbacks and avoid
stuttering or tearing issues.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/835
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add a mechanism to create, recycle and destroy window buffers when
needed.
Typically, this adds a new `xwl_window_buffer` structure which
represents a buffer for a given Xwayland window.
Each Xwayland window has two different pools of buffers:
- The available buffers pool:
Those are buffers which where created previously and that have either
not been submitted to the compositor or submitted and released.
- The unavailable buffers pool:
Those are typically the buffers which are being used by the
compositor, awaiting a release.
Initially, an Xwayland window starts with both pools empty. As soon as a
new buffer is needed, it's either created (if there is none available)
or picked from the pool of available buffers.
Once submitted to the compositor, the buffer is moved to the pool of
unavailable buffers. When the corresponding `wl_buffer` is released by
the compositor, it is moved back to pool of available buffers again to
be reused when needed.
To avoid keeping too many buffers around doing nothing, a garbage
collection of older, unused buffers also takes care of disposing the
buffers being unused for some time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The API `wl_buffer_add_listener` is misleading in the sense that there
can be only one `wl_buffer` release callback, and trying to add a new
listener when once is already in place will lead to a protocol error.
The Xwayland EGL backends may need to set up their own `wl_buffer`
release listener, meaning that there is no way to our own `wl_buffer`
release callback.
To avoid the problem, add our own callback API to be notified when the
`wl_buffer` associated with an `xwl_pixmap` is released, triggered from
the different `xwl_pixmap` implementations.
Also update the Present code to use the new buffer release callback API.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, when a X11 client (usually the X11 window manager from a
Wayland compositor) changes the value of the X11 property
`_XWAYLAND_ALLOW_COMMITS` from `false` to `true`, all pending frame
callbacks on the window are discarded so that the commit occurs
immediately.
Weston uses that mechanism to prevent the content of the window from
showing before it's ready when mapping the window initially, but
discarding the pending frame callbacks has no effect on the initial
mapping of the X11 window since at that point there cannot be any frame
callback on a surface which hasn't been committed yet anyway.
However, discarding pending frame callbacks can be problematic if we
were to use the same `_XWAYLAND_ALLOW_COMMITS` mechanism to prevent
damages to be posted before the X11 toplevel is updated completely
(including the window decorations from the X11 window manager).
Remove the portion of code discarding the pending frame callback,
Xwayland should always wait for a pending frame callback if there's one
before posting new damages.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/333
For some reason, indentation for EGL backend hooks was broken.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland pixmap SHM code uses `malloc()` to allocate the
xwl_pixmap.
Use `calloc()` instead, as the EGLstream backend does, as it is safer
(initializing the allocated data to 0).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, glamor GBM backend uses `malloc()` to allocate the
xwl_pixmap.
Use `calloc()` instead, as the EGLstream backend does, as it is safer
(initializing the allocated data to 0).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The definition by the manual is `calloc(size_t nmemb, size_t size)`.
Swap the arguments of calloc() calls to match the definition.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When a pixmap is created with a backing FBO, the FBO should be cleared
to avoid rendering uninitialized memory. This could happen when the
pixmap is rendered without being filled in its entirety.
One example is when a top-level window without a background is
resized. The pixmap would be reallocated to prepare for more pixels,
but uninitialized memory would be rendered in the resize offset until
the client sends a frame that fills these additional pixels.
Another example is when a new top-level window is created without a
background. Uninitialized memory would be rendered after the pixmap is
allocated and before the client sends its first frame.
This issue is only apparent in OpenGL implementations that don't zero
the VRAM of allocated buffers by default, such as RadeonSI.
Signed-off-by: Dor Askayo <dor.askayo@gmail.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/636
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
`glGetString(GL_VERSION)` will return NULL without a current context.
Commit dabc7d8b (“xwayland: Fall back to GLES2 if we don't get at least
GL 2.1 in glamor”) would check the context is created, but it is made
current just after, so the call to `epoxy_gl_version()` would return 0,
hence defeating the version check.
Make the context current prior to call `epoxy_gl_version()`.
Fixes: dabc7d8b - xwayland: Fall back to GLES2 if we don't get at least
GL 2.1 in glamor
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/932https://gitlab.freedesktop.org/xorg/xserver/merge_requests/324
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Some particularly unfortunate hardware (Intel gen3, mostly) will give
you GLES2 but not GL 2.1. Fall back to GLES2 for such cases so you still
get accelerated GLX.
Define EGL_NO_X11 everywhere were we also define MESA_EGL_NO_X11_HEADERS,
EGL_NO_X11 is the MESA_EGL_NO_X11_HEADERS equivalent for the egl headers
shipped with libglvnd.
This fixes the xserver not building with the libglvnd-1.2.0 headers:
In file included from /usr/include/EGL/eglplatform.h:128,
from /usr/include/epoxy/egl_generated.h:11,
from /usr/include/epoxy/egl.h:46,
from glamor_priv.h:43,
from glamor_composite_glyphs.c:25:
/usr/include/X11/Xlib.h:222:2: error: conflicting types for 'GC'
222 | *GC;
| ^~
In file included from glamor.h:34,
from glamor_priv.h:32,
from glamor_composite_glyphs.c:25:
../include/gcstruct.h:282:3: note: previous declaration of 'GC' was here
282 | } GC;
| ^~
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Apps using randr to change the resolution when going fullscreen, in
combination with _NET_WM_STATE_FULLSCREEN to tell the window-manager (WM)
to make their window fullscreen, expect the WM to give the fullscreen window
the size of the emulated resolution as would happen when run under Xorg (*).
We need the WM to emulate this behavior for these apps to work correctly,
with Xwaylands resolution change emulation. For the WM to emulate this,
it needs to know about the emulated resolution for the Windows owning
client for each monitor.
This commit adds a _XWAYLAND_RANDR_EMU_MONITOR_RECTS property, which
contains 4 Cardinals (32 bit integers) per monitor with resolution
emulation info. Window-managers can use this to get the emulated
resolution for the client and size the window correctly.
*) Since under Xorg the resolution will actually be changed and after that
going fullscreen through NET_WM_STATE_FULLSCREEN will size the window to
be equal to the new resolution.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Games based on the allegro gaming library or on ClanLib-1.0 do not size
their window to match the fullscreen resolution, instead they use a
window covering the entire screen, drawing only the fullscreen resolution
part of it.
This commit adds a check for these games, so that we correctly apply a
viewport to them making fullscreen work properly for these games under
Xwayland.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for fake mode changes using viewport, for apps which want to
change the resolution when going fullscreen.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
crtc->mode reflects the mode set through the xrandr extension, once we
add support for also changing the mode through the vidmode extension this
will no longer correctly reflect the emulated resolution.
Add a new xwlVidModeGetCurrentRRMode helper which determines the mode by
looking at the emulated_mode instead.
Likewise add a xwlVidModeGetRRMode helper and use that in
xwlVidModeCheckModeForMonitor/xwlVidModeCheckModeForDriver to allow any
mode listed in the randr_output's mode list.
This is a preparation patch for adding emulated mode/resolution change
support to Xwayland's XF86 vidmode extension emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for adding emulated mode/resolution change
support to Xwayland's XF86 vidmode extension emulation, using the
Wayland viewport extension.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for per client randr-resolution change emulation using viewport,
for apps which want to change the resolution when going fullscreen.
Partly based on earlier work on this by Robert Mader <robert.mader@posteo.de>
Note SDL2 and SFML do not restore randr resolution when going from
fullscreen -> windowed, I believe this is caused by us still reporting the
desktop resolution when they query the resolution. This is not a problem
because when windowed the toplevel window size includes the window-decorations
so it never matches the emulated resolution.
One exception would be the window being resizable in Windowed mode and the
user resizing the window so that including decorations it matches the
emulated resolution *and* the window being at pos 0x0. But this is an
extreme corner case. Still I will submit patches upstream to SDL2
and SFML to always restore the desktop resolution under Xwayland,
disabling resolution emulation all together when going windowed.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for storing per output randr/vidmode emulated resolution
into the per client data.
Since we do not have a free/delete callback for the client this uses
a simple static array. The entries are tied to a specific output by the
server_output_id, with a server_output_id of 0 indicating a free slot
(0 is the "None" Wayland object id).
Note that even if we were to store this in a linked list, we would still
need the server_output_id as this is *per client* *per output*.
This is a preparation patch for adding randr/vidmode resolution
change emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add per client private data, which for now is empty.
This is a preparation patch for adding randr/vidmode resolution
change emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds the RandR 1.2 interface to xwayland and allows modes
advertised by the compositor to be set in an undistructive manner.
With this patch, applications that try to set the resolution will usually
succeed and work while other apps using the same xwayland
instance are not affected at all.
The RandR 1.2 interface will be needed to implement fake-mode-setting and
already makes applications work much cleaner and predictive when a mode
was set.
[hdegoede@redhat.com: Make crtc_set only succeed if the mode matches
the desktop resolution]
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for adding support for apps which want to
change the resolution when they go fullscreen because they are hardcoded
to render at a specific resolution, e.g. 640x480.
Follow up patches will fake the mode-switch these apps want by using
WPviewport to scale there pixmap to cover the entire output.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a viewport is set, damage will only work properly when using
wl_surface_damage_buffer instead of wl_surface_damage.
When no viewport is set, there should be no difference between
surface and buffer damage.
This is a preparation patch for using viewport to add support for fake
mode-changes through xrandr for apps which want to change the resolution
when going fullscreen.
Changes by Hans de Goede <hdegoede@redhat.com>:
-Split the damage changes out into their own patch
-Add xwl_surface_damage helper
-Also use buffer_damage / the new helper for the present and cursor code
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit adds support for the wayland wp_viewport extension, note
nothing uses this yet.
This is a preparation patch for adding support for fake mode-changes through
xrandr for apps which want to change the resolution when going fullscreen.
[hdegoede@redhat.com: Split the code for the extension out into its own patch]
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In non-rootless mode, not all pixmaps need a wl_buffer backing.
Suggested-by: Twaik Yont (@twaik) in #834
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The compositor may send DRM_FORMAT_MOD_INVALID instead of a list of
modifiers for various reasons. Handle this gracefully by ignoring it.
Without this, if a compositor would send DRM_FORMAT_MOD_INVALID, it'd
result in empty windows provided by Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This FD also triggers the "wait for WM_S0" paths, so that the
compositor may set up a "maintenance line" for Xwayland, for
services that are essential to run before any client (eg. xrdb).
Those services would use this FD, disguised as an extra display
connection.
This -initfd can be seen as a generalization of -wm, a Wayland
compositor may use -initfd to launch its WM and any other clients
that should start up, or it may use -wm as a dedicated connection for
the WM and optionally use -initfd for the misc. startup clients.
If either of -wm or -initfd is passed, Xwayland will expect a selection
notification on WM_S0 before incorporating the FDs in -listen to the
poll list.
Also, correct a minor typo in the listenfd argument output,
give → given.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
If Xwayland gets to realize a window meant for composition before the
compositor redirected windows (i.e. redirect mode is not RedirectDrawManual
yet), the window would stay "invisible" as we wouldn't create a
wl_surface/wl_shell_surface for it at any later point.
This scenario may happen if the wayland compositor sets up a X11 socket
upfront, but waits to raise Xwayland until there are X11 clients. In this
case the first data on the socket is the client's, the compositor can hardly
beat that in order to redirect subwindows before the client realizes a
Window.
In order to jump across this hurdle, allow the late creation of a matching
(shell) surface for the WindowPtr on SetWindowPixmapProc, so it is ensured
to be created after the compositor set up redirection.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This will be dissociated in future commits to handle the cases
where windows are being realized before there is a compositor
handling redirection.
In that case, we still want the DamagePtr to be registered upfront
on RealizeWindowProc before a corresponding xwl_window might be
created. Most notably, it cannot be lazily created on
SetWindowPixmapProc as damage accounting gets broken.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
This adds support for xdg-output-unstable-v1 version 3, added in [1].
This new version deprecates zxdg_output_v1.done and replaces it with
wl_output.done. If the version is high enough, there's no need to wait for both
an xdg_output.done event and a wl_output.done event -- we only care about
wl_output.done.
[1]: 962dd53537
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Some modules are required in multiple places in the meson file.
Move the actual requirements to the top of the file as a variable so
that updating a version does not require changing the actual value in
multiple places.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Building Xwayland without glamor support would raise a warning at build
time:
xwayland.c: In function ‘xwl_screen_init’:
xwayland.c:980:10: warning: unused variable ‘use_eglstreams’
980 | Bool use_eglstreams = FALSE;
| ^~~~~~~~~~~~~~
When building without glamor support, we cannot have EGL Streams support
either, the two being related. So we do not need to declare the variable
`use_eglstreams` if glamor is not enabled.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When building Xwayland without glamor support enabled using automake,
the build would fail at link time trying to find `glamor_block_handler`:
/usr/bin/ld: xwayland-glx.o: in function `egl_drawable_wait_x':
hw/xwayland/xwayland-glx.c:102: undefined reference to
`glamor_block_handler'
Make sure we don't try to build `xwayland-glx.c` without glamor in the
Xwayland Makefile.
Note: Meson build is fine because it's already build only with glamor
enabled.
Fixes: commit 8469241 - "xwayland: Add EGL-backed GLX provider"
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Both `gbm_bo_create()` and `gbm_bo_create_with_modifiers()` can fail and
return `NULL`.
If that occurs, `xwl_glamor_gbm_create_pixmap()` will not create a
pixmap for the (NULL) GBM bo, but would still try to free the bo which
leads to a crash in mesa:
[...]
#7 <signal handler called>
#8 in gbm_bo_destroy (bo=0x0) at ../src/gbm/main/gbm.c:439
#9 in xwl_glamor_gbm_create_pixmap () at xwayland-glamor-gbm.c:245
#10 in ProcCreatePixmap () at dispatch.c:1440
#11 in Dispatch () at dispatch.c:478
#12 in dix_main () at main.c:276
To avoid the crash, only free the GBM bo if not `NULL`.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1729925
There's not really a good way to query this from the wayland server, so
just set the maximum to the X11 protocol limits. While we're at it,
lower the minimum screen size to something implausibly small too, just
in case.
Fixes: xorg/xserver#850
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Running Xwayland non-rootless and resizing the output would lead to a
crash while trying to update the larger areas of the root window.
Make sure we resize the backing pixmap according to the new output size
to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/834
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Using the existing command line option "-listen" for passing file
descriptors between the Wayland compositor and Xwayland is misleading,
Xwayland should add is own command line option for that specific use.
As XWayland is spawned by the Wayland compositor, we cannot just change
the option, as that would break all existing Wayland compositors using
Xwayland, so we add a new options "-listenfd" and mark the previous one
as deprecated and log a warning, but it still works for backward
compatibility.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/214
Xwayland uses the command line option “-listen” to pass file descriptors
from the Wayland compositor.
That breaks the traditional, documented behavior of the “-listen”
command line option which is to enable a transport type.
Checks if the given option starts with a digit, otherwise treat it as a
regular transport type.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/817
Suggested-by: Rodrigo Exterckötter Tjäder
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
a2rgb10 configs would end up with channel masks corresponding to
argb8888. This would confuse the GLX core code into matching an a2rgb10
config to the root window visual, and that would make things look wrong
and bad.
Fix this by handling more cases. We're still not fully general here, and
this could still be wrong on big-endian. The XXX comment about doing
something less ugly still applies, ideally we would get this information
out of EGL instead of making lucky guesses. Still, better than it was.
Fixes: xorg/xserver#824
Hiding the tablet tool cursor results in it being hidden forever after.
This is due to the stale frame callback that will neither be disposed
or replaced. This can be reproduced in krita (X11) as the pointer
cursor is hidden while over the canvas.
Clearing the frame callback ensures the correct behavior in future
xwl_tablet_tool_set_cursor() calls (i.e. a new cursor surface being
displayed, and a new frame callback created), and is 1:1
with xwl_seat_set_cursor() for pointers.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
With `glamor_set_pixmap_texture()` returning its status, remove the hack
and use the return value.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The current code in `xwl_glamor_gbm_create_pixmap_for_bo()` may fail in
several cases that are not checked for:
- `eglCreateImageKHR()` may have failed to create the image,
- `glEGLImageTargetTexture2DOES()` may fail and set an error,
- `glamor_set_pixmap_texture()` may fail for very large pixmaps
because the corresponding FBO could not be created.
Trying to upload content to a pixmap with no texture will crash Mesa,
glamor and Xwayland, e.g.:
XXX fail to create fbo.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x29)
(EE) 1: libpthread.so.0 (funlockfile+0x50)
(EE) 2: libc.so.6 (__memmove_avx_unaligned_erms+0x215)
(EE) 3: dri/i965_dri.so (_mesa_format_convert+0xab3)
(EE) 4: dri/i965_dri.so (_mesa_texstore+0x205)
(EE) 5: dri/i965_dri.so (store_texsubimage+0x28c)
(EE) 6: dri/i965_dri.so (intel_upload_tex+0x13b)
(EE) 7: dri/i965_dri.so (texture_sub_image+0x134)
(EE) 8: dri/i965_dri.so (texsubimage_err+0x150)
(EE) 9: dri/i965_dri.so (_mesa_TexSubImage2D+0x48)
(EE) 10: Xwayland (glamor_upload_boxes+0x246)
(EE) 11: Xwayland (glamor_copy+0x4d1)
(EE) 12: Xwayland (miCopyRegion+0x96)
(EE) 13: Xwayland (miDoCopy+0x43c)
(EE) 14: Xwayland (glamor_copy_area+0x24)
(EE) 15: Xwayland (damageCopyArea+0xba)
(EE) 16: Xwayland (compCopyWindow+0x31c)
(EE) 17: Xwayland (damageCopyWindow+0xd3)
(EE) 18: Xwayland (miResizeWindow+0x7b7)
(EE) 19: Xwayland (compResizeWindow+0x3a)
(EE) 20: Xwayland (ConfigureWindow+0xa96)
(EE) 21: Xwayland (ProcConfigureWindow+0x7d)
(EE) 22: Xwayland (Dispatch+0x320)
(EE) 23: Xwayland (dix_main+0x366)
(EE) 24: libc.so.6 (__libc_start_main+0xf3)
(EE) 25: Xwayland (_start+0x2e)
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Check for the possible cases of failure above and fallback to the
regular glamor pixmap creation when an error is detected.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/661
Without this we're using driswrast to set up GLX visuals. This is
unfortunate because llvmpipe does not expose multisample configs, so
various apps that expect them will fail. With this we just query the
capabilities of the EGL that's backing glamor, and reflect that to the
GLX clients. This also paves the way for xserver to stop being a DRI
driver loader, which is nice.
Fixes: xorg/xserver#640Fixes: xorg/xserver#643
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98272
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
On pointer enter notification, Xwayland checks for an existing pointer
warp with a `NULL` sprite.
In turn, `xwl_pointer_warp_emulator_maybe_lock()` checks for an existing
grab and the destination window using `XYToWindow()` which does not
check for the actual sprite not being `NULL`.
So, in some cases, when the pointer enters the surface and there is an
existing X11 grab which is not an ownerEvents grab, Xwayland would crash
trying to dereference the `NULL` sprite pointer:
#0 __GI_raise ()
#1 __GI_abort () at abort.c:79
#2 OsAbort () at utils.c:1351
#3 AbortServer () at log.c:879
#4 FatalError () at log.c:1017
#5 OsSigHandler () at osinit.c:156
#6 OsSigHandler () at osinit.c:110
#7 <signal handler called>
#8 XYToWindow (pSprite=0x0, x=0, y=0) at events.c:2880
#9 xwl_pointer_warp_emulator_maybe_lock () at xwayland-input.c:2673
#10 pointer_handle_enter () at xwayland-input.c:434
Avoid the crash by simply checking for the sprite being not `NULL` in
`xwl_pointer_warp_emulator_maybe_lock()`
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.redhat.com/1708119
Commit d8ec33fe05 added libglxvnd.la to
Xwayland_LDFLAGS but GLX can be disabled through --disable-glx.
In this case, build fails on:
make[3]: *** No rule to make target '../../glx/libglxvnd.la', needed by 'Xwayland'. Stop.
make[3]: *** Waiting for unfinished jobs....
Fixes:
- http://autobuild.buildroot.org/results/397f8098c57fc6c88aa12dc8d35ebb1b933d52ef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
xwl_present_cleanup frees the struct xwl_present_window memory,
so if there's a pending callback, we have to destroy it to prevent
use-after-free in xwl_present_sync_callback.
Should fix issue #645.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Xwayland creates and destroys the CRTC along with the Wayland outputs,
so there is possibly a case where the number of CRTC drops to 0.
However, `xwl_present_get_crtc()` always return `crtcs[0]` which is
invalid when `numCrtcs` is 0.
That leads to crash if a client queries the Present capabilities when
there is no CRTC, the backtrace looks like:
#0 raise() from libc.so
#1 abort() from libc.so
#2 OsAbort() at utils.c:1350
#3 AbortServer() at log.c:879
#4 FatalError() at log.c:1017
#5 OsSigHandler() at osinit.c:156
#6 OsSigHandler() at osinit.c:110
#7 <signal handler called>
#8 main_arena() from libc.so
#9 proc_present_query_capabilities() at present_request.c:236
#10 Dispatch() at dispatch.c:478
#11 dix_main() at main.c:276
To avoid returning an invalid pointer (`crtcs[0]`) in that case, simply
check for `numCrtcs` being 0 and return `NULL` in that case.
Thanks to Michel Dänzer <michel.daenzer@amd.com> for pointing this as a
possible cause of the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1609181
Since 08843efc KWin was not able to start a Wayland session. Independently
of listen_fd_count add_client_fd must be called. Same holds for the
wm_selection_callback. Therefore just remove the condition.
Bugzilla: https://bugs.freedesktop.org/109220
Signed-off-by: Roman Gilg <subdiff@gmail.com>
The buffer release queue has two kinds of entries:
* Pending async flips.
* Completed flips waiting for their buffer to be released by the Wayland
compositor.
xwl_present_timer_callback neither completes async flips nor releases
buffers, so the timer isn't needed for the buffer release queue.
Fixes issue #12. Presumably the problem was that Present operations on
unmapped windows were executed immediately instead of only when reaching
the target MSC.
When a window is unrealized, a pending frame callback may never be
called, which could result in repeatedly freezing until the frame timer
fires after a second.
Fixes these symptoms when switching from fullscreen to windowed mode in
sauerbraten.
There's no need to keep track of the window which last performed a
Present flip. This fixes crashes due to the assertion in
xwl_present_flips_stop failing. Fixes issue #10.
The damage generated by a flip only needs to be ignored once, then
xwl_window::present_flipped can be cleared. This may fix freezing in
the (hypothetical) scenario where Present flips are performed on a
window, followed by other drawing requests using the window as the
destination, but nothing triggering xwl_present_flips_stop. The damage
from the latter drawing requests would continue being ignored.
There are logically server state not screen state. Not that multiple
screens works, at the moment, but that's no excuse to be sloppy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Completing them from xwl_present_sync_callback had at least two issues:
* It was before the MSC was incremented in xwl_present_frame_callback,
so the MSC value in the completion event could be lower than the
target specified by the client. This could cause hangs with the Mesa
Vulkan drivers.
* It allowed clients to run at a frame-rate higher than the Wayland
compositor's frame-rate, wasting energy on generating frames which
were never displayed. This isn't expected to happen unless the client
specified PresentOptionAsync (in which case flips are still completed
from xwl_present_sync_callback, allowing higher frame-rates).
v2:
* Make xwl_present_has_events return true when there's a pending
"synchronous" flip, so those complete after at most ~1 second even if
the Wayland server doesn't send a frame event.
Bugzilla: https://bugs.freedesktop.org/106713
Apart from simplifying the code, this should also prevent a condition
(which might only be possible with the following fix) reported in
https://gitlab.freedesktop.org/wayland/weston/issues/115#note_52467:
1. xwl_present_timer_callback indirectly calls xwl_present_reset_timer
-> xwl_present_free_timer
2. xwl_present_timer_callback then returns a non-0 value, so DoTimer
calls TimerSet with the old xwl_present_window->frame_timer pointer
which was freed in step 1 => use after free
Calling xwl_present_reset_timer explicitly passes NULL to TimerSet if
step 1 freed xwl_present_window->frame_timer, and it will allocate a new
one.
The function `xwl_glamor_gbm_create_pixmap()` first creates a buffer
objects and then creates the xwl_pixmap from it.
However, `xwl_glamor_gbm_create_pixmap_for_bo()` is not called if the
buffer object creation fails, and `xwl_glamor_gbm_create_pixmap()`
simply returns `glamor_create_pixmap()`.
The problem with this is that if `xwl_glamor_gbm_create_pixmap_for_bo()`
is not called then neither is `xwl_pixmap_set_private()` and further
calls to `xwl_pixmap_get()` will return NULL and cause a NULL pointer
dereference if the return value is not checked:
#0 xwl_glamor_gbm_get_wl_buffer_for_pixmap ()
at hw/xwayland/xwayland-glamor-gbm.c:248
#1 xwl_window_post_damage () at hw/xwayland/xwayland.c:697
#2 xwl_display_post_damage () at hw/xwayland/xwayland.c:759
#3 block_handler () at hw/xwayland/xwayland.c:890
#4 BlockHandler () at dix/dixutils.c:388
#5 WaitForSomething () at os/WaitFor.c:201
#6 Dispatch () at dix/dispatch.c:421
#7 dix_main () at dix/main.c:276
#8 __libc_start_main () at ../csu/libc-start.c:308
#9 _start ()
(gdb) print xwl_pixmap
$1 = (struct xwl_pixmap *) 0x0
Make sure we check for `xwl_pixmap_get()` returned value where relevant
and fail gracefully if this is the case.
See also: https://gitlab.gnome.org/GNOME/mutter/issues/340
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marco Trevisan <mail@3v1n0.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
`xwl_present_timer_callback()` is initially marked a private and later
implemented as public.
Let's keep that private, shall we.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
0a9415cf apparently can tickle bugs in the GL stack where glGetString
returns NULL, presumably because the eglMakeCurrent() didn't manage to
actually install a dispatch table and you're hitting a stub function.
That's clearly not our bug, but if it happens we should at least not
crash. Notice this case and fail gently.
Signed-off-by: Adam Jackson <ajax@redhat.com>
wl_drm's protocol "device" event provides the path to the DRM device,
which may not be a render node, thus causing Xwayland to fall back to
DRM authentication which may fail if the user has switched to another
VT while Xwayland is starting.
Search for a render node corresponding to the given DRM device and try
to use it instead, as render nodes do not need DRM authentication and
Xwayland can make use of them if it can find one.
Closes: https://bugs.freedesktop.org/108038
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mesa started supporting GL_OES_EGL_image on llvmpipe in 17.3, after this
commit:
commit bbdeddd5fd0b797e1e281f058338b3da4d98029d
Author: Gurchetan Singh <gurchetansingh@chromium.org>
Date: Tue Aug 1 14:49:33 2017 -0700
st/dri: add drisw image extension
That's pretty cool, but it means glamor now thinks it can initialize on
llvmpipe. This is almost certainly not what anyone wants, as glamor on
llvmpipe is pretty much uniformly slower than fb.
This fixes both Xorg and Xwayland to refuse glamor in such a setup.
Xephyr is left alone, both because glamor is not the default there and
because Xephyr+glamor+llvmpipe is one of the easier ways to get xts to
exercise glamor.
The (very small) downside of this change is that you lose DRI3 support.
This wouldn't have helped you very much (since an lp glamor blit is
slower than a pixman blit), but it would eliminate the PutImage overhead
for llvmpipe's glXSwapBuffers. A future change should add DRI3 support
for the fb-only case.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Xwayland's `xwl_destroy_window()` invokes `xwl_present_cleanup()`
before the common `DestroyWindow()`.
But then `DestroyWindow()` calls `present_destroy_window()` which will
possibly end up in `xwl_present_abort_vblank()` which will try to access
data that was previously freed by `xwl_present_cleanup()`:
Invalid read of size 8
at 0x434184: xwl_present_abort_vblank (xwayland-present.c:378)
by 0x53785B: present_wnmd_abort_vblank (present_wnmd.c:651)
by 0x53695A: present_free_window_vblank (present_screen.c:87)
by 0x53695A: present_destroy_window (present_screen.c:152)
by 0x42A90D: xwl_destroy_window (xwayland.c:653)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
Address 0x182abde0 is 80 bytes inside a block of size 112 free'd
at 0x4C2FDAC: free (vg_replace_malloc.c:530)
by 0x42A937: xwl_destroy_window (xwayland.c:647)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
by 0x446DA5: ProcKillClient (dispatch.c:3279)
by 0x4476AF: Dispatch (dispatch.c:479)
Block was alloc'd at
at 0x4C30B06: calloc (vg_replace_malloc.c:711)
by 0x433F46: xwl_present_window_get_priv (xwayland-present.c:54)
by 0x434228: xwl_present_get_crtc (xwayland-present.c:302)
by 0x539728: proc_present_query_capabilities (present_request.c:227)
by 0x4476AF: Dispatch (dispatch.c:479)
by 0x44B5B5: dix_main (main.c:276)
by 0x75F611A: (below main) (libc-start.c:308)
This is because `xwl_present_cleanup()` frees the memory but does not
remove it from the window's privates, and `xwl_present_abort_vblank()`
will still find it and hence try to access that freed memory...
Remove `xwl_present_window` from window's privates on cleanup so that no
other function can find and reuse that data once it's freed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1616269
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_output->randr_crtc is used in the update_screen_size() function :
==5331== Invalid read of size 4
==5331== at 0x15263D: update_screen_size (xwayland-output.c:190)
==5331== by 0x152C48: xwl_output_remove (xwayland-output.c:413)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
==5331== by 0x27574B: Dispatch (dispatch.c:421)
==5331== by 0x279945: dix_main (main.c:276)
==5331== Address 0x1aacb5f4 is 36 bytes inside a block of size 154 free'd
==5331== at 0x48369EB: free (vg_replace_malloc.c:530)
==5331== by 0x1F8AE8: RROutputDestroyResource (rroutput.c:421)
==5331== by 0x29A2AC: doFreeResource (resource.c:880)
==5331== by 0x29AE5B: FreeResource (resource.c:910)
==5331== by 0x152BE0: xwl_output_remove (xwayland-output.c:408)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== Block was alloc'd at
==5331== at 0x48357BF: malloc (vg_replace_malloc.c:299)
==5331== by 0x1F93E0: RROutputCreate (rroutput.c:83)
==5331== by 0x152A75: xwl_output_create (xwayland-output.c:361)
==5331== by 0x14BE59: registry_global (xwayland.c:764)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents multiple scroll events happening for wayland compositors
which send axis values other than 10. For example, libinput will
typically return 15 for each scroll wheel step, and if a wayland
compositor sends those to xwayland without normalising them, 2 scroll
wheel steps will end up as 3 xorg scroll events. By listening for the
discrete_axis event, this will now correctly send only 2 xorg scroll
events.
The wayland protocol gurantees that there will always be an axis event
following an axis_discrete event. However, it does not gurantee that
other events (including other axis_discrete+axis pairs) will not happen
in between them. So we must keep a list of outstanding axis_discrete
events.
Signed-off-by: Scott Anderson <scott@anderso.nz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
glamor_fds_from_pixmap() will bail out early if DRI3 is not enabled,
unfortunately Xwayland's glamor code would not set it as enabled which
would lead to blank pixmaps when using texture from pixmap.
Make sure to mark DRI3 as enabled from glamor_egl_screen_init() in
Xwayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107287
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The logical size is the size of the output in the global compositor
space. The mode width/height should be scaled as in the logical
size, but shouldn't be transformed. Thus we need to rotate back
the logical size to be able to use it as the mode width/height.
This fixes issues with pointer input on transformed outputs.
Signed-Off-By: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When support for allocating GBM BOs with modifiers was added,
glamor_fd_from_pixmap() was changed so that it would return an error if
it got a bo with modifiers set from glamor_fds_from_pixmap(). The
problem is that on systems that support BOs with modifiers,
glamor_fds_from_pixmap() will always return BOs with modifiers.
This means that glamor_fd_from_pixmap() was broken entirely, which broke
a number of other things including glamor_shareable_fd_from_pixmap(),
which meant that modesetting using multiple GPUs with the modesetting
DDX was also broken. Easy reproducer:
- Find a laptop with DRI prime that has outputs connected to the
dedicated GPU and integrated GPU
- Try to enable one display on each using the modesetting DDX
- Fail
Since there isn't a way to ask for no modifiers from
glamor_fds_from_pixmap, we create a shared _glamor_fds_from_pixmap()
function used by both glamor_fds_from_pixmap() and
glamor_fd_from_pixmap() that calls down to the appropriate
glamor_egl_fd*_from_pixmap() function.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
The API init_wl_registry() and has_wl_interfaces() are marked as being
optional, but both GBM And EGLStream backends implement them so there is
point in keeping those optional.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
When retrieving the Wayland buffer from a pixmap, if the buffer already
exists, the GBM backend will return that existing buffer.
However, as seen with the Present issues, if the call had previously
passed a wrong size, that buffer will remain at the wrong size for as
long as the buffer exists, which is error prone.
Considering that the width/height passed to get_wl_buffer() is always the
actual pixmap drawable size, and considering that the EGLStream backend
makes no use of the size either, there is really no point in passing the
width/height around.
Simplify the xwl_glamor_pixmap_get_wl_buffer() and EGL backends API by
removing the pixmap size, and use the drawable size instead.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_glamor_eglstream_init_egl() uses "EGL_IMG_context_priority"
extension, make sure it's actually available before using it.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Now that we have separate backends for EGLStream and GBM, we can
explicitly check for the EGLStream backend to disable present support
in that case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
To be able to check for availability of the Wayland interfaces required
to run a given EGL backend (either GBM or EGLStream for now), we need
to have each backend structures and vfuncs in place before we enter the
Wayland registry dance.
That basically means that we should init all backends at first, connect
to the Wayland compositor and query the available interfaces and then
decide which backend is available and should be used (or none if either
the Wayland interfaces or the EGL extensions are not available).
For this purpose, hold an egl_backend struct for each backend we are to
consider prior to connect to the Wayland display so that, when we get to
query the Wayland interfaces, everything is in place for each backend to
handle the various Wayland interfaces.
Eventually, when we need to chose which EGL backend to use for glamor,
the available Wayland interfaces and EGL extensions available are all
known to Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Move EGL backends initialization to its own function in
xwayland-glamor.c
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Introduces a new egl_backend function to let the EGL backend check for
the presence of the required Wayland interfaces.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGL backend availability requires both EGL extensions and Wayland
interfaces to be present, so we will need to consider multiple backends
during initialization.
As a preliminary work, move the egl_backend to its own struct so that we
can have more than one backend at any given time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If using a render node, we can skip DRM authentication.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Surely, we should fail to init GBM backend if "GL_OES_EGL_image" is
missing.
This seems to have been lost with commit 1545e2dba ("xwayland: Decouple
GBM from glamor").
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Both xwl_glamor_init_wl_registry() and the Wayland global registry
handler use the interface id/name in that order, using name/id in the
egl_backend vfunc makes things confusing and error prone.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Functions such as:
xwl_glamor_egl_supports_device_probing()
xwl_glamor_egl_get_devices()
xwl_glamor_egl_device_has_egl_extensions()
Are of no use outside of EGLStream support, move them to the relevant
source file.
Similarly, the other glamor functions such as:
xwl_glamor_init()
xwl_screen_set_drm_interface()
xwl_screen_set_dmabuf_interface()
xwl_glamor_pixmap_get_wl_buffer()
xwl_glamor_init_wl_registry()
xwl_glamor_post_damage()
xwl_glamor_allow_commits()
xwl_glamor_egl_make_current()
Are useless without glamor support enabled, move those within a
a "#ifdef XWL_HAS_GLAMOR" in xwayland.h
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Make xwl_output_get_xdg_output() private, it doesn't need to be
available elsewhere.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGLStream requires glamor, but the opposite is not true. So if someone
passes "-eglstream" with a GPU which does not support EGLStream, we
could maybe still try GBM and be lucky.
That allows Wayland compositors to pass "-eglstream" regardless of the
actual hardware, if they want to enable EGLStream on GPU which support
it.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
eglQueryDevicesEXT() would abort if the required extensions are not
available, meaning that enabling “-eglstream” on a non-EGLStream
capable hardware would lead to an abort().
Check that "EGL_EXT_device_base" extension is available and bail out
early if not, so we don't abort() later in eglQueryDevicesEXT().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The command line option "-eglstream" used to enable EGLStream support
for NVidia GPU was made available only when Xwayland was built with
EGLStream support enabled.
Wayland compositors who spawn Xwayland have no easy way to tell whether
or not Xwayland was built with EGLStream support enabled, and adding
"-eglstream" command line option to Xwayland when it wasn't built with
EGLStream support would prevent Xwayland from starting (“Unrecognized
option” error).
Make sure we support the command line option "-eglstream" regardless of
EGLStream support in Xwayland. Obviously, if Xwayland was built without
EGLStream support, this has no effect.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Changes the device name from "xwayland-stylus" to "xwayland-tablet stylus".
This doesn't fully address #26 but it goes a little step into making it more
human-readable.
https://gitlab.freedesktop.org/wayland/wayland/issues/26
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
If the pixmap size does not match the present box size, flickering
occurs.
This can happen when the client changes its size (e.g. switching to
fullscreen), and since the buffer is kept as long as the pixmap is
valid, once the buffer is created, it remains at the wrong (old) size
and causes continuous flickering.
Use the actual pixmap's drawable size instead of the present box to
create the buffer so that it's sized appropriately.
Bugzilla: https://bugs.freedesktop.org/106841
Fixes: 0fb2cca193 "xwayland: Preliminary support for Present's new
window flip mode"
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
We probably don't want a fake crtc to be visible to clients, and we
definitely don't want to generate events every time we create such a
fake (which would happen as a side effect from RRCrtcCreate hitting
RRTellChanged). As it happens we're not actually using that crtc for
anything because xwayland doesn't store any state on the crtc object,
so it suffices to use the real crtc for the screen.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
We were mixing stdint and CARD* types, causing compiler warnings on
32-bit. Just switch over to stdint, which is what we'd like the server
to be using long term, anyway.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of reusing xwl_window introduce a persistent window struct for every
window, that asks for Present flips.
This struct saves all relevant data and is only freed on window destroy.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Clean up only if the request points to the presenting window or its top
parent window.
Since in this case all events are removed unconditionally, always stop
the timer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Roman Gilg <subdiff@gmail.com>
There's no real point - if we don't have EGL then the extension check is
also going to fail - and the entrypoint is new in 1.5.0, which we don't
need to require yet.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
This adds initial support for displaying Xwayland applications through
the use of EGLStreams and nvidia's custom wayland protocol by adding
another egl_backend driver. This also adds some additional egl_backend
hooks that are required to make things work properly.
EGLStreams work a lot differently then the traditional way of handling
buffers with wayland. Unfortunately, there are also a LOT of various
pitfalls baked into it's design that need to be explained.
This has a very large and unfortunate implication: direct rendering is,
for the time being at least, impossible to do through EGLStreams. The
main reason being that the EGLStream spec mandates that we lose the
entire color buffer contents with each eglSwapBuffers(), which goes
against X's requirement of not losing data with pixmaps. no way to use
an allocated EGLSurface as the storage for glamor rendering like we do
with GBM, we have to rely on blitting each pixmap to it's respective
EGLSurface producer each frame. In order to pull this off, we add two
different additional egl_backend hooks that GBM opts out of
implementing:
- egl_backend.allow_commits for holding off displaying any EGLStream
backed pixmaps until the point where it's stream is completely
initialized and ready for use
- egl_backend.post_damage for blitting the content of the EGLStream
surface producer before Xwayland actually damages and commits the
wl_surface to the screen.
The other big pitfall here is that using nvidia's wayland-eglstreams
helper library is also not possible for the most part. All of it's API
for creating and destroying streams rely on being able to perform a
roundtrip in order to bring each stream to completion since the wayland
compositor must perform it's job of connecting a consumer to each
EGLstream. Because Xwayland has to potentially handle both responding to
the wayland compositor and it's own X clients, the situation of the
wayland compositor being one of our X clients must be considered. If we
perform a roundtrip with the Wayland compositor, it's possible that the
wayland compositor might currently be connected to us as an X client and
thus hang while both Xwayland and the wayland compositor await responses
from eachother. To avoid this, we work directly with the wayland
protocol and use wl_display_sync() events along with release() events to
set up and destroy EGLStreams asynchronously alongside handling X
clients.
Additionally, since setting up EGLStreams is not an atomic operation we
have to take into consideration the fact that an EGLStream can
potentially be created in response to a window resize, then immediately
deleted due to another pending window resize in the same X client's
pending reqests before Xwayland hits the part of it's event loop where
we read from the wayland compositor. To make this even more painful, we
also have to take into consideration that since EGLStreams are not
atomic that it's possible we could delete wayland resources for an
EGLStream before the compositor even finishes using them and thus run
into errors. So, we use quite a bit of tracking logic to keep EGLStream
objects alive until we know the compositor isn't using them (even if
this means the stream outlives the pixmap it backed).
While the default backend for glamor remains GBM, this patch exists for
users who have had to deal with the reprecussion of their GPU
manufacturers ignoring the advice of upstream and the standardization of
GBM across most major GPU manufacturers. It is not intended to be a
final solution to the GBM debate, but merely a baindaid so our users
don't have to suffer from the consequences of companies avoiding working
upstream. New drivers are strongly encouraged not to use this as a
backend, and use GBM like everyone else. We even spit this out as an
error from Xwayland when using the eglstream backend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just a small autogenerated header that will soon contain more then just
one macro.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This takes all of the gbm related code in wayland-glamor.c and moves it
into it's own EGL backend for Xwayland, xwayland-glamor-gbm.c.
Additionally, we add the egl_backend struct into xwl_screen in order to
provide hooks for alternative EGL backends such as nvidia's EGLStreams.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Regardless of the order we un-realize windows.
Suggested-by: Roman Gilg <subdiff@gmail.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
xwl_unrealize_window() would use freed xwl_window which can lead to
various memory corruption and crashes, as reported by valgrind:
Invalid read of size 8
at 0x42C802: xwl_present_cleanup (xwayland-present.c:84)
by 0x42BA67: xwl_unrealize_window (xwayland.c:601)
by 0x541EE9: compUnrealizeWindow (compwindow.c:285)
by 0x57E1FA: UnrealizeTree (window.c:2816)
by 0x581189: UnmapWindow (window.c:2874)
by 0x54EB26: ProcUnmapWindow (dispatch.c:879)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
Address 0xf520f60 is 96 bytes inside a block of size 184 free'd
at 0x4C2EDAC: free (vg_replace_malloc.c:530)
by 0x42B9FB: xwl_unrealize_window (xwayland.c:624)
by 0x541EE9: compUnrealizeWindow (compwindow.c:285)
by 0x57E1FA: UnrealizeTree (window.c:2816)
by 0x581189: UnmapWindow (window.c:2874)
by 0x54EB26: ProcUnmapWindow (dispatch.c:879)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
Block was alloc'd at
at 0x4C2FB06: calloc (vg_replace_malloc.c:711)
by 0x42B307: xwl_realize_window (xwayland.c:488)
by 0x541E59: compRealizeWindow (compwindow.c:268)
by 0x57DA40: RealizeTree (window.c:2617)
by 0x580B28: MapWindow (window.c:2694)
by 0x54EA2A: ProcMapWindow (dispatch.c:845)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
This is because UnrealizeTree() traverses the tree from top to bottom,
which invalidates the assumption that if the Window doesn't feature an
xwl_window on its own, it's the xwl_window of its first ancestor with
one.
This reverts commit 82df2ce3
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Present support in Xwayland relies on glamor, make sure Xwayland can
be built without glamor by moving references to Present code inside
the conditional GLAMOR_HAS_GBM.
Reported-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Turns out that's legal, and xts exercises it, and we crash:
Thread 1 "Xwayland" received signal SIGSEGV, Segmentation fault.
dixGetPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:122
122 return (char *) (*privates) + key->offset;
(gdb) bt
#0 dixGetPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:122
#1 dixLookupPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:166
#2 xwl_window_of_top (window=0x0) at xwayland.c:128
#3 xwl_cursor_warped_to (device=<optimized out>, screen=0x268b6e0, client=<optimized out>, window=0x0, sprite=0x300bb30,
x=2400, y=1350) at xwayland.c:292
#4 0x00000000005622ec in ProcWarpPointer (client=0x32755d0) at events.c:3618
In this case, x/y are the screen-space coordinates where the pointer
ends up, and we need to look up the (X) window there.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The caller may ignore the return value (will be addressed with later
commit) so simply zero the count from the get-go. We're pretty much do
so, in all cases but one :-\
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The caller may ignore the return value (will be addressed with later
commit) so simply zero the count from the get-go. We're pretty much do
so, in all cases but one :-\
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
It makes it perfectly clear that we should not be modifying them.
Should help highlight issues like the one fixed with previous commit.
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The glamor_pixmap_from_fds error path erroneously closes the fds.
We don't own them, plus the caller closes them after the function in
called.
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
dri3_screen_info is the user provide dispatch. Something that we do
not and should not change.
When using the _ptr typecast + const the compiler barfs at us
(rightfully so), so use the _rec one.
[Silence a new const mismatch warning too - ajax]
Fixes: 5631382988 ("dri3: Add DRI3 extension")
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
[735/786] Generating 'hw/xwayland/Xwayland@exe/relative-pointer-unstable-v1-protocol.c'.
Using "code" is deprecated - use private-code or public-code.
See the help page for details.
Use private-code if wayland-scanner is new enough.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Link the newly introduced support for Present flips. For now flips can only
be used in rootless mode together with Glamor.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Queue present events to msc values. Fake msc events with a refresh rate of
about 60fps when flips are not possible. When flips are executed rely on
frame callbacks with a slow updating timer as fallback.
This is important for applications, that want to limit their framerate.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the compositor is not sending frame callbacks while we still wait
on buffer release events fake a continuous msc counter with a timer.
Having this timer is a prerequisite for queuing events.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Introduce support for Present's window flip mode. The support is not yet
complete, but works reasonable well for the most important use case, that
is fullscreen applications.
We take a Present flip and if the xwl_window->window has the same dimensions
as the presenting window, the flip is represented by a wl_buffer and attached
to the main wl_surface of the xwl_window.
After commit we are listening for the sync callback in order to tell Present,
that the pixmap flip is not longer pending, for the frame callback in order
to update the msc counter and for the buffer release callback in order to tell
Present that the pixmap is idle again.
The following functionality is missing from this patch:
* (slowed down) flips in case the compositor is not sending frame callbacks,
* queuing events to MSC times,
* per window flips for child windows with smaller size than the xwl_window.
To make use of this functionality Xwayland must run rootless and with
Glamor/GBM.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add arguments to give the caller more information and control
over the creation of a wl_buffer with GBM, in particular let
the caller determine the size of the buffer.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using modifier might allow the driver to use a more optimal format
(e.g. tiled/compressed). Let's try to use those if possible.
v2: Don't filter out multi-plane modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It relies on GBM >= 17.1.0 where we can import BO with multiple
planes and a format modifier (GBM_BO_IMPORT_FD_MODIFIER).
v2: Properly free fds in Xwayland
[Also add glamor_egl_ext.h to Makefile.am for distcheck's sake - ajax]
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Initial implementation for DRI3 v1.1. Only the DRI3 implementation
is there, backends need to implement the proper hooks.
Version is still set to 1.0 so clients shouldn't use the new
requests yet.
v2: Use depth/bpp instead of DRM formats in requests
v3: Remove DMA fence requests from v1.1
Add screen/drawable modifier sets
v4: Free array returned by 'get_drawable_modifiers()'
v5: Fix FD leak
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When xdg_output support was added to Xwayland, need_rotate parameter was
added to output_get_new_size where true gave you the old pre-xdg_output
behavior and false gave the new behavior. Unfortunately, the two places
where this is called, need_rotate was set backwards. This caused input
get clampped to the wrong dimensions. Also, the logic for deciding
whether or not to flip was wrong because, if need_rotate was false, it
would always flip which is not what you want.
v2 (Daniel Stone):
- Fix output_get_new_size so that it doesn't flip the dimensions when
need_rotate is false.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Add a stub for Xnest so it continues to link, but otherwise we support
GLX on every server so there's no need to make every DDX add it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The big change here is MakeCurrent and context tag tracking. We now
delegate context tags entirely to the vnd layer, and simply store a
pointer to the context state as the tag data. If a context is deleted
while it's current, we allocate a fake ID for the context and move the
context state there, so the tag data still points to a real context. As
a result we can stop trying so hard to detach the client from contexts
at disconnect time and just let resource destruction handle it.
Since vnd handles all the MakeCurrent protocol now, our request handlers
for it can just be return BadImplementation. We also remove a bunch of
LEGAL_NEW_RESOURCE, because now by the time we're called vnd has already
allocated its tracking resource on that XID.
v2: Update to match v2 of the vnd import, and remove more redundant work
like request length checks.
v3: Add/remove the XID map from the vendor private thunk, not the
backend. (Kyle Brenneman)
v4: Fix deletion of ghost contexts (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Unfortunately, on my machine Xwayland immediately crashes when I try to
start it. gdb backtrace:
#0 0x00007ffff74f0e79 in wl_proxy_marshal () from target:/lib64/libwayland-client.so.0
#1 0x0000000000413172 in zwp_confined_pointer_v1_destroy (zwp_confined_pointer_v1=0x700000000)
at hw/xwayland/Xwayland@exe/pointer-constraints-unstable-v1-client-protocol.h:612
#2 0x0000000000418bc0 in xwl_seat_destroy_confined_pointer (xwl_seat=0x8ba2a0)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2839
#3 0x0000000000418c09 in xwl_seat_unconfine_pointer (xwl_seat=0x8ba2a0)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2849
#4 0x0000000000410d97 in xwl_cursor_confined_to (device=0xa5a000, screen=0x8b9d80, window=0x9bdb70)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland.c:328
#5 0x00000000004a8571 in ConfineCursorToWindow (pDev=0xa5a000, pWin=0x9bdb70, generateEvents=1,
confineToScreen=0) at /home/lyudess/Projects/xserver/dix/events.c:900
#6 0x00000000004a94b7 in ScreenRestructured (pScreen=0x8b9d80)
at /home/lyudess/Projects/xserver/dix/events.c:1387
#7 0x0000000000502386 in RRScreenSizeNotify (pScreen=0x8b9d80)
at /home/lyudess/Projects/xserver/randr/rrscreen.c:160
#8 0x000000000041a83c in update_screen_size (xwl_output=0x8e7670, width=3840, height=2160)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:203
#9 0x000000000041a9f0 in apply_output_change (xwl_output=0x8e7670)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:252
#10 0x000000000041aaeb in xdg_output_handle_done (data=0x8e7670, xdg_output=0x8e7580)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:307
#11 0x00007ffff50e9d1e in ffi_call_unix64 () at ../src/x86/unix64.S:76
#12 0x00007ffff50e968f in ffi_call (cif=<optimized out>, fn=<optimized out>, rvalue=<optimized out>,
avalue=<optimized out>) at ../src/x86/ffi64.c:525
#13 0x00007ffff74f3d8b in wl_closure_invoke () from target:/lib64/libwayland-client.so.0
#14 0x00007ffff74f0928 in dispatch_event.isra () from target:/lib64/libwayland-client.so.0
#15 0x00007ffff74f1be4 in wl_display_dispatch_queue_pending () from target:/lib64/libwayland-client.so.0
#16 0x00007ffff74f200b in wl_display_roundtrip_queue () from target:/lib64/libwayland-client.so.0
#17 0x0000000000418cad in InitInput (argc=12, argv=0x7fffffffd9c8)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2867
#18 0x00000000004a20e3 in dix_main (argc=12, argv=0x7fffffffd9c8, envp=0x7fffffffda30)
at /home/lyudess/Projects/xserver/dix/main.c:250
#19 0x0000000000420cb2 in main (argc=12, argv=0x7fffffffd9c8, envp=0x7fffffffda30)
at /home/lyudess/Projects/xserver/dix/stubmain.c:34
This appears to be the result of xwl_cursor_confined_to() and
xwl_screen_get_default_seat(). While not against protocol, mutter ends
up sending xdg_output before wl_seat. xwl_screen_get_default_seat()
makes the naïve assumption that we always have a valid seat, we end up
returning a pointer to the empty list itself instead of an actual seat
and causing ourselves to segfault.
So, actually return NULL in xwl_screen_get_default_seat() if the seat
list is empty, and skip any pointer confinement processing in
xwl_cursor_confined_to() when we don't have a seat setup yet.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Place a manual redirect on windows on xwl_realize_window() and remove
it on xwl_unrealize_window() to avoid the X11 window manager removing
its redirect before Xwayland has unrealized the window (e.g. if the X11
window manager has terminated unexpectedly)
Suggested by Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This is a rare occurrence of a crash in Xwayland for which I don't have
the reproducing steps, just a core file.
The backtrace looks as follow:
#0 raise () from /usr/lib64/libc.so.6
#1 abort () from /usr/lib64/libc.so.6
#2 OsAbort () at utils.c:1361
#3 AbortServer () at log.c:877
#4 FatalError () at log.c:1015
#5 OsSigHandler () at osinit.c:154
#6 <signal handler called>
#7 xwl_glamor_pixmap_get_wl_buffer () at xwayland-glamor.c:162
#8 xwl_screen_post_damage () at xwayland.c:514
#9 block_handler () at xwayland.c:665
#10 BlockHandler () at dixutils.c:388
#11 WaitForSomething () at WaitFor.c:219
#12 Dispatch () at dispatch.c:422
#13 dix_main () at main.c:287
The crash is caused by dereferencing “xwl_pixmap->buffer” in
xwl_glamor_pixmap_get_wl_buffer() because “xwl_pixmap” is NULL.
Reason for this is because the corresponding pixmap is from the root
window and xwayland is rootless by default.
This can happen if the window was mapped, redirected, damaged and
unredirected immediately, before the damage is processed by Xwayland.
Make sure to remove the dirty window from the damage list on unrealize
to prevent this from happening.
Credit goes to Adam Jackson <ajax@nwnk.net> and Daniel Stone
<daniel@fooishbar.org> for finding the root cause the issue.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
BTN_STYLUS3 has been introduced by the Linux 4.15 kernel to report the
status of the third button present on Wacom's new "Pro Pen 3D" stylus.
Treat this button like xf86-input-wacom and send a button 8 event
("navigate back") when received from Wayland.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The xdg-output protocol aims at describing outputs in way which is
more in line with the concept of an output on desktop oriented systems.
For now it just features the position and logical size which describe
the output position and size in the global compositor space.
This is however much useful for Xwayland to advertise the output size
and position to X11 clients which need this to configure their surfaces
in the global compositor space as the compositor may apply a different
scale from what is advertised by the output scaling property (to achieve
fractional scaling, for example).
This was added in wayland-protocols 1.10.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
If an X11 app draws a little here, some there, and a tiny bit in the
opposite corner, using RegionExtents for the damage to be sent to the
Wayland compositor will cause massive over-damaging.
However, we cannot blindly send an arbitrary number of damage
rectangles, because there is a risk of overflowing the Wayland
connection. If that happens, it triggers an abort in libwayland-client.
Try to be more accurate with the damage by sending up to 256 rectangles
per window, and fall back to extents otherwise. The number is completely
arbitrary.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When the Wayland compositor notifies of a new keymap, for the first X11
client using the keyboard, the last slave keyboard used might still not
be set (i.e. “lastSlave” is still NULL).
As a result, the new keymap is not applied, and the first X11 window
will have the wrong keymap set initially.
Apply the new keymap to the master keyboard as long as there's one.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=791383
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland is a pretty standard Wayland client, we want to be able to
capture core dumps on crashes.
Yet using "-core" causes any FatalError() to generate a core dump,
meaning that we would get a core file for all Wayland server crashes,
which would generate a lot of false positives.
Instead of using FatalError() on Wayland socket errors, give up cleanly
to avoid dumping core files when "-core" is used.
See also: https://bugzilla.gnome.org/show_bug.cgi?id=790502
and: https://bugzilla.gnome.org/show_bug.cgi?id=789086
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The tablet/stylus interfaces reused xwl_seat->focus_window, which
would leave a somewhat inconsistent state of that variable for
wl_pointer purposes (basically, everything) if the pointer happened
to lay on the same surface than the stylus while proximity_out
happens.
We just want the stylus xwl_window to correctly determine we have
stylus focus, and to correctly translate surface-local coordinates
to root coordinates, this can be done using a different variable.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
From the bug: "What happens if bits->width is less than 8? :)"
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=103012
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It doesn't matter, none of this matters.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Calling xwl_window_from_window means looping through the window ancestor
chain whenever it is called on a child window or on an automatically
redirected window.
Since these properties and the potential ancestor's xwl_window are constant
between window realization and unrealization, we can omit the looping by
always putting the respective xwl_window in the Window's private field on
its realization. If the Window doesn't feature an xwl_window on its own,
it's the xwl_window of its first ancestor with one.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Not all compositors allow for customizing the Xwayland command line,
gnome-shell/mutter for example have the command line and path to
Xwayland binary hardcoded, which makes it harder for users to disable
glamor acceleration in Xwayland (glamor being used by default).
Add an environment variable XWAYLAND_NO_GLAMOR to disable glamor support
in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Xwayland would crash in some circumstances while trying to issue a
pointer locking when the cursor is hidden when there is no seat focus
window set.
The crash signature looks like:
#0 zwp_pointer_constraints_v1_lock_pointer ()
#1 xwl_pointer_warp_emulator_lock () at xwayland-input.c:2584
#2 xwl_seat_maybe_lock_on_hidden_cursor () at xwayland-input.c:2756
#3 xwl_seat_maybe_lock_on_hidden_cursor () at xwayland-input.c:2765
#4 xwl_seat_cursor_visibility_changed () at xwayland-input.c:2768
#5 xwl_set_cursor () at xwayland-cursor.c:245
#6 miPointerUpdateSprite () at mipointer.c:468
#7 miPointerDisplayCursor () at mipointer.c:206
#8 CursorDisplayCursor () at cursor.c:150
#9 AnimCurDisplayCursor () at animcur.c:220
#10 ChangeToCursor () at events.c:936
#11 ActivatePointerGrab () at events.c:1542
#12 GrabDevice () at events.c:5120
#13 ProcGrabPointer () at events.c:4908
#14 Dispatch () at dispatch.c:478
#15 dix_main () at main.c:276
xwl_pointer_warp_emulator_lock() tries to use the surface from the
xwl_seat->focus_window leading to a NULL pointer dereference when that
value is NULL.
Check that xwl_seat->focus_window is not NULL earlier in the stack in
xwl_seat_maybe_lock_on_hidden_cursor() and return early if not the case
to avoid the crash.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102474
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the compositor has no support for the Xwayland keyboard grab
protocol, there is no need to set-up our keyboard grab handler.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The version detect was erroring out with 1.9 protos installed, and we
weren't building the new code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The keyboard grabbing protocol for Xwayland is included in
wayland-protocol 1.9.
Update the wayland-protocol required version in both configure and meson
builds and add support for this new protocol in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
... where it is named src/egl/wayland/wayland-drm/wayland-drm.xml and
has its requests sorted by protocol version number, avoiding a warning
from wayland-scanner.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The 'tablet_tool_wheel' function for tablet scrolling was added back in
8a1defcc63 but left unimplemented. This commit fills in the necessary
details, using the "clicks" count as the number of discrete scroll up/down
events to send.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The 'tablet_tool_frame' function treats the button masks as though they
are zero-indexed, but 'tablet_tool_button_state' treats them as one-
indexed. The result is that an e.g. middle click event recieved from
Wayland will be sent from the X server as a right-click instead.
Fixes: 773b04748d ("xwayland: handle button events after motion events")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland doesn't override these, so we don't need defining those
in the xwl_screen struct.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the typical pattern in games of "hide cursor, grab with a confineTo,
warp constantly the pointer to the middle of the window" the last warping
step is actually rather optional. Some games may choose to just set up a
grab with confineTo argument, and trust that they'll get correct relative
X/Y axis values despite the hidden cursor hitting the confinement window
edge.
To cater for these cases, lock the pointer whenever there is a pointer
confinement and the cursor is hidden. This ensures the pointer position
is in sync with the compositor's when it's next shown again, and more
importantly resorts to the relative pointer for event delivery.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes grabs on InputOnly windows whose parent is the root window
failing with GrabNotViewable. This is due to window->borderSize/windowSize
being computed as clipped by its parent, resulting in a null region.
Setting up the right size on the root window makes the InputOnly size
correct too, so the GrabNotViewable paths aren't hit anymore.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Of sorts, actually make it confine to the pointer focus, as the
InputOnly window is entirely invisible to xwayland accounting,
we don't have a xwl_window for it.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Of sorts, as we can't honor pointer warping across the whole root window
coordinates, peek the pointer focus in these cases.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All that was left here was updating the FBO's size. However, the FBO
size was always set correctly already through
glamor_set_pixmap_texture() from whoever had attached a new BO to the
pixmap.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
When running an Xwayland server from the command line, we end up
resetting the server every time all of the clients connected to the
server leave. This would be fine, except that xwayland makes the mistake
of unconditionally calling LoadExtensionList(). This causes us to setup
the glxExtension twice in a row which means that when we lose our last
client on the second server generation, we end up trying to call the glx
destructors twice in a row resulting in a segfault:
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x70845bf]
(EE) 2: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x32897d) [0x1196e5bd]
(EE) 3: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x328a45) [0x1196e745]
(EE) 4: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x32665f) [0x11969f7f]
(EE) 5: Xwayland (__glXDRIscreenDestroy+0x30) [0x54686e]
(EE) 6: Xwayland (glxCloseScreen+0x3f) [0x5473db]
(EE) 7: Xwayland (glxCloseScreen+0x53) [0x5473ef]
(EE) 8: Xwayland (dix_main+0x7b6) [0x44c8c9]
(EE) 9: Xwayland (main+0x28) [0x61c503]
(EE) 10: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x72b1401]
(EE) 11: Xwayland (_start+0x2a) [0x4208fa]
(EE) 12: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x18
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Easy reproduction recipe:
- Start an Xwayland session with the default settings
- Open a window
- Close that window
- Open another window
- Close that window
- Total annihilation occurs
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the event that xwayland gets launched on a wayland compositor that
doesn't yet have support for wp_tablet_manager, we end up skipping the
initialization of the lists. This is wrong, because regardless of
whether or not a tablet is present we still attempt to traverse these
lists later in xwl_set_cursor(), expecting that if the lists are empty
from no tablet manager that we simply won't execute any loop iterations.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x7f73722545bf]
(EE) 2: Xwayland (xwl_set_cursor+0x9f) [0x429974]
(EE) 3: Xwayland (miPointerUpdateSprite+0x261) [0x4fe1ca]
(EE) 4: Xwayland (mieqProcessInputEvents+0x239) [0x4f8d33]
(EE) 5: Xwayland (ProcessInputEvents+0x9) [0x4282f0]
(EE) 6: Xwayland (Dispatch+0x42) [0x43e2d4]
(EE) 7: Xwayland (dix_main+0x5c9) [0x44c6dc]
(EE) 8: Xwayland (main+0x28) [0x61c523]
(EE) 9: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x7f7371e9d401]
(EE) 10: Xwayland (_start+0x2a) [0x4208fa]
(EE) 11: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x28
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Reproduced when trying to run upstream xwayland under fedora 25's weston
package.
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hooked up a bit differently to the other tools. Those tools can be static for
all and be re-used. The wacom driver initializes the pad with the correct
number of buttons though and we can't do this until we have the pad done event.
If the tablet is removed and we plug a different one in, we should initialize
that correctly, so unlike the other tools the pad is properly removed and
re-initialized on plug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Each xwl_tablet_tool gets a xwl_cursor, as on wayland each of those
will get an independent cursor that can be set through
zwp_tablet_tool.set_cursor.
However, all tools (and the pointer) share conceptually the same VCP
on Xwayland, so have cursor changes trigger a xwl_cursor update on
every tool (and the pointer, again). Maybe Xwayland could keep track
of the most recent device and only update that cursor to get better
visual results, but this is simpler, and it's going to be odd
anyway...
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This struct takes away the cursor info in xwl_seat, and has
an update function so we can share the frame handling code
across several xwl_cursors.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Make sure the button events are sent after the motion events into the new
position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Translates Wayland tablet events into corresponding X11 tablet events. As
with the prior commit, these events are modeled after those created by the
xf86-input-wacom driver to maximize compatibility with existing applications.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Creates and maintains the canonical trio of X devices (stylus, eraser,
and cursor) to be shared by all connected tablets. A per-tablet trio
could be created instead, but there are very few benefits to such a
configuration since all tablets still ultimately share control of a
single master pointer.
The three X devices are modeled after those created by xf86-input-wacom
but use a generic maximum X and Y that should be large enough to
accurately represent values from even the largest currently-available
tablets.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
The wp_tablet_seat interface provides us with notifications as tablets,
tools, and pads are connected to the system. Add listener functions and
store references to the obtained devices.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
If we're notified about the existence of the wp_tablet_manager interface,
we bind to it so that we can make use of any tablets that are (or later
become) available. For each seat that exists or comes into existance at
a later point, obtain the associated tablet_seat.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Be more precise in describing the return value.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Client resources can survive the client itself, in which case we
may end up in our sync callback trying to access client's data after
it's been freed/reclaimed.
Add a ClientStateCallback handler to monitor the client state changes
and clear the sync callback set up by the glamor drm code if any.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
After an X cursor is unrealized, the seat's corresponding x_cursor is
cleared, but if a frame callback was pending at the time, it will
remain and thus prevent any further cursor update, leaving the window
with no cursor.
Make sure to destroy the frame callback, if any, when that occurs, so
that next time a cursor needs to be set, it won't be ignored for a frame
callback that will never be triggered.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1389327
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Rui Matos <tiagomatos@gmail.com>
in XWayland, dri3_send_open_reply() is called from a sync callback, so
there is a possibility that the client might be gone when we get to the
callback eventually, which leads to a crash in _XSERVTransSendFd() from
WriteFdToClient() .
Check if clientGone has been set in the sync callback handler to avoid
this.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99149
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1416553
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
keyboard_check_repeat() fetches the XWayland seat from the
dev->public.devicePrivate do do its thing.
If a key event is sent programmatically through Xtest, our device is the
virtual core keyboard and that has a dev->public.devicePrivate of NULL,
leading to a segfault in keyboard_check_repeat().
This is the case with "antimicro" which sends key events based on the
joystick buttons.
Don't set the checkRepeat handler on the VCK since it cannot possibly work
anyway and it has no effect on the actual checkRepeat intended functionality.
Bugzilla: https://bugzilla.redhat.com/1416244
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
During the InitInput() phase, the wayland events get dequeued so we
can possibly end up calling dispatch_pointer_motion_event().
If this occurs before xwl_seat->focus_window is set, it leads to a NULL
pointer derefence and a segfault.
Check for xwl_seat->focus_window in both pointer_handle_frame() and
relative_pointer_handle_relative_motion() prior to calling
dispatch_pointer_motion_event() like it's done in
pointer_handle_motion().
Bugzilla: https://bugzilla.redhat.com/1410804
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The X11 window manager (XWM) of a Wayland compositor can use the
_XWAYLAND_ALLOW_COMMITS property to control when Xwayland sends
wl_surface.commit requests. If the property is not set, the behaviour
remains what it was.
XWM uses the property to inhibit commits until the window is ready to be
shown. This gives XWM time to set up the window decorations and internal
state before Xwayland does the first commit. XWM can use this to ensure
the first commit carries fully drawn decorations and the window
management state is correct when the window becomes visible.
Setting the property to zero inhibits further commits, and setting it to
non-zero allows commits. Deleting the property allows commits.
When the property is changed from zero to non-zero, there will be a
commit on next block_handler() call provided that some damage has been
recorded.
Without this patch (i.e. with the old behaviour) Xwayland can and will
commit the surface very soon as the application window has been realized
and drawn into. This races with XWM and may cause visible glitches.
v3:
- introduced a simple setter for xwl_window::allow_commits
- split xwl_window_property_allow_commits() out of
xwl_property_callback()
- check MakeAtom(_XWAYLAND_ALLOW_COMMITS)
v2:
- use PropertyStateCallback instead of XACE, based on the patch
"xwayland: Track per-window support for netwm frame sync" by
Adam Jackson
- check property type is XA_CARDINAL
- drop a useless memcpy()
Weston Bug: https://phabricator.freedesktop.org/T7622
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix the following warning due to --disable-glamor:
CC Xwayland-xwayland.o
In file included from /home/pq/local/include/wayland-client.h:40:0,
from xwayland.h:35,
from xwayland.c:26:
xwayland.c: In function ‘block_handler’:
/home/pq/local/include/wayland-client-protocol.h:3446:2: warning: ‘buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
wl_proxy_marshal((struct wl_proxy *) wl_surface,
^
xwayland.c:466:23: note: ‘buffer’ was declared here
struct wl_buffer *buffer;
^
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Refactor xwl_screen_post_damage() and split the window specific code
into a new function xwl_window_post_damage().
This is a pure refactoring, there are no behavioral changes. An assert
is added to xwl_window_post_damage() to ensure frame callbacks are not
leaked if a future patch changes the call.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Previously, we would swap the width/height of the Xwayland output based
on the output rotation, so that the overall screen size would match the
actual rotation of each output.
Problem is the RandR's ConstrainCursorHarder() handler will also apply
the output rotation, meaning that when the output is rotated, the
pointer will be constrained within the wrong dimension.
Moreover, XRandR assumes the original output width/height are unchanged
when the output is rotated, so by changing the Xwayland output width and
height based on rotation, Xwayland causes XRandr to report the wrong
output sizes (an output of size 1024x768 rotated left or right should
remain 1024x768, not 768x1024).
So to avoid this issue and keep things consistent between Wayland and
Xwayland outputs, leave the actual width/height unchanged but apply the
rotation when computing the screen size. This fixes both the output size
being wrong in "xrandr -q" and the pointer being constrained in the
wrong dimension with rotated with weston.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the Wayland compositor sets a rotation on the output, Xwayland
translates the transformation as an xrandr rotation for the given
output.
However, if the rotation is not supported by the CRTC, this is not
a valid setup and xrandr queries will fail.
Pretend we support all rotations and reflections so that the
configuration remains a valid xrandr setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For some applications (like fullscreen games) it matters for XRandr
resolution to be correctly set and equal to root window resolution.
In XServer there is already hack for this, adapted it for XWayland.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99574
Signed-off-by: Svitozar Cherepii <razotivs@gmail.com>
Tested-by: Svitozar Cherepii <razotivs@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Sometimes, Xwayland will try to use a cursor that has just been freed,
leading to a crash when trying to access that cursor data either in
miPointerUpdateSprite() or AnimCurTimerNotify().
CheckMotion() updates the pointer's cursor based on which xwindow
XYToWindow() returns, and Xwayland implements its own xwl_xy_to_window()
to fake a crossing to the root window when the pointer has left the
Wayland surface but is still within the xwindow.
But after an xwindow is unrealized, the last xwindow used to match the
xwindows is cleared so two consecutive calls to xwl_xy_to_window() may
not return the same xwindow.
To avoid this issue, update the last_xwindow based on enter and leave
notifications instead of xwl_xy_to_window(), and check if the xwindow
found by the regular miXYToWindow() is a child of the known last
xwindow, so that multiple consecutive calls to xwl_xy_to_window()
return the same xwindow, being either the one found by miXYToWindow()
or the root window.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1385258
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Vít Ondruch <vondruch@redhat.com>
Tested-by: Satish Balay <balay@fastmail.fm>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Commits 816015648f and
fee0827a9a made it so that
wl_keyboard::enter doesn't result in X clients getting KeyPress events
while still updating our internal xkb state to be in sync with the
host compositor.
wl_keyboard::leave needs to be handled in the same way as its
semantics from an X client POV should be the same as an X grab getting
triggered, i.e. X clients shouldn't get KeyRelease events for keys
that are still down at that point.
This patch uses LeaveNotify for these events on wl_keyboard::leave and
changes the current use of KeymapNotify to EnterNotify instead just to
keep some symmetry between both cases.
On ProcessDeviceEvent() we still need to deactivate X grabs if needed
for KeyReleases.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition by the manual is:
calloc(size_t nmemb, size_t size)
Swap the arguments of calloc() calls to be the right way around.
Presumably this makes no functional difference, but better follow the
spec.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not needed anymore now that mipointer exposes an API for that,
miPointerInvalidateSprite()
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
posix_fallocate() does an explicit rollback if it gets EINTR, and
this is a problem on slow systems because when the allocation size
is sufficiently large posix_fallocate() will always be interrupted
by the smart scheduler's SIGALRM.
Changes since v1 - big comment in the code to explain what is going on
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
On some random condition, a touch event may trigger a crash in Xwayland
in GetTouchEvents().
The (simplified) backtrace goes as follow:
(gdb) bt
#0 GetTouchEvents() at getevents.c:1892
#1 QueueTouchEvents() at getevents.c:1866
#2 xwl_touch_send_event() at xwayland-input.c:652
#5 wl_closure_invoke() from libwayland-client.so.0
#6 dispatch_event() from libwayland-client.so.0
#7 wl_display_dispatch_queue_pending() from libwayland-client.so.0
#8 xwl_read_events() at xwayland.c:483
#9 ospoll_wait() at ospoll.c:412
#10 WaitForSomething() at WaitFor.c:222
#11 Dispatch() at dispatch.c:412
#12 dix_main() at main.c:287
#13 __libc_start_main() at libc-start.c:289
#14 _start ()
The crash occurs when trying to access the sprite associated with the
touch device, which appears to be NULL. Reason being the device itself
is more a keyboard device than a touch device.
Moreover, it appears the device is neither enabled nor activated
(inited=0, enabled=0) which doesn't seem right, but matches the code in
init_touch() from xwayland-input.c which would enable the device if it
was previously existing and otherwise would create the device but not
activate it.
Make sure we do activate and enable touch devices just like we do for
other input devices such as keyboard and pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Pointer enter event coordinates are surface relative and we need them to
be screen relative for pScreen->SetCursorPosition().
https://bugzilla.gnome.org/show_bug.cgi?id=758283
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
eglGetDisplay forces the implementation to guess which kind of display
it's been handed. glvnd does something different from Mesa, and in
general it's impossible for the library to get this right. Add a new
inline that gets the logic right, and works around a quirk in epoxy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Emulate pointer warps by locking the pointer and sending relative
motion events instead of absolute. X will keep track of the "fake"
pointer cursor position given the relative motion events, and the
client warping the cursor will warp the faked cursor position.
Various requirements need to be met for the pointer warp emulator to
enable:
The cursor must be invisible: since it would not be acceptable that a
fake cursor position would be different from the visual representation
of the cursor, emulation can only be done when there is no visual
representation done by the Wayland compositor. Thus, for the emulator
to enable, the cursor must be hidden, and would the cursor be displayed
while the emulator is active, the emulator would be destroyed.
The window that is warped within must be likely to have pointer focus.
For example, warping outside of the window region will be ignored.
The pointer warp emulator will disable itself once the fake cursor
position leaves the window region, or the cursor is made visible.
This makes various games depending on pointer warping (such as 3D
first-person shooters and stategy games using click-to-drag-map like
things) work.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Translate grabbing a pointer device with confineTo set to a window into
confining the Wayland pointer using the pointer constraints protocol.
This makes clients that depend on the pointer not going outside of the
window region, such as certain games and virtual machines viewers, to
function more properly.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If there was an relative pointer motion within the same frame as an
absolute pointer motion, provide both the absolute coordinate and the
unaccelerated delta when setting the valuator mask.
If a frame contained only a relative motion, queue an absolute motion
with an unchanged position, but still pass the unaccelerated motion
event.
If the wl_seat advertised by the compositor is not new enough, assume
each relative and absolute pointer motion arrives within their own
separate frames.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Wait until wl_pointer.frame with dispatching the pointer motion event,
if wl_pointer.frame is supported by the compositor. This will later be
used to combine unaccelerated motion deltas with the absolute motion
delta.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Generating relative and absolute movement events from the same input
device is problematic, because an absolute pointer device doesn't
expect to see any relative motion events. To be able to generate
relative pointer motion events including unaccelerated deltas, create a
secondary pointer device 'xwayland-relative-pointer', and use that for
emitting relative motion events.
Signed-off-by: Krzysztof Sobiecki <sobkas@gmail.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Put device class initialization in init_[device_class](xwl_seat) and
releasing in release_[device class](xwl_seat). The purpose is to make
it easier to add more type of initialization here later, without making
the function too large.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Will be used for getting unaccelerated motion events and later for
relative motions used by a pointer warp emulator.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The way we map the touch absolute device to screen coordinates can't
work across wl_output mode and geometry events. Instead, set up
a fixed coordinate space, and transform touch events according to
the screen coordinate space as they happen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Olivier Fourdan
Michel Dänzer
Adam Jackson
Greg V
Roman Gilg
Emmanuel Gil Peyrot
Lyude Paul
Alan Coopersmith
SimonP
Sjoerd Simons
Simon Ser
Carlos Garnacho
mntmn
Hans de Goede
David Seifert
Dor Askayo
Robert Mader
Sven Joachim
Jonas Ådahl
Fabrice Fontaine
Michel Dänzer
Peter Hutterer
Lionel Landwerlin
Scott Anderson
Dave Airlie
Eric Anholt
Emil Velikov
Mario Kleiner
Louis-Francis Ratté-Boulianne
Jason Ekstrand
Jason Gerecke
Pekka Paalanen
Emil Velikov
Svitozar Cherepii
Rui Matos
Ian Ray
Krzysztof Sobiecki