The modesetting driver has atomic modesetting disabled by default but
can be enabled (if supported) using a configuration option.
Add this option in the man page.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This adds support for TearFree page flips to eliminate tearing without the
use of a compositor. It allocates two shadow buffers for each CRTC, a back
buffer and a front buffer, and uses damage tracking to minimize excessive
copying between buffers and skip unnecessary flips when the screen's
contents remain unchanged. It works on transformed screens too, such as
rotated and scaled CRTCs.
When PageFlip is enabled, TearFree won't force fullscreen DRI clients to
synchronize their page flips to the vblank interval.
TearFree is disabled by default.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
The DRM event queue in the kernel is quite small and can be easily
exhausted by DRI clients. When the event queue is full, that means nothing
can be queued onto it anymore, which can lead to incorrect presentation
times for DRI clients and failure when attempting to queue a page flip.
To make matters worse, once an event is placed onto the kernel's event
queue, there's no straightforward way to prematurely remove it from the
kernel's event queue in userspace, which means that aborting a sequence
number doesn't free up space in the event queue.
Since vblank events from DRI clients are the largest consumers of the
event queue, and since it's often easy to know the desired target MSC of
their vblank events without querying the kernel for a CRTC's current MSC,
we can coalesce vblank events occurring at the same MSC such that only one
of them is placed onto the kernel's event queue, instead of allowing
duplicate vblank events to pollute the event queue.
This is achieved by tracking the next kernel-queued event's MSC on a
per-CRTC basis and then running all of that CRTC's vblank event handlers
which have reached their target MSC when the queued MSC is signaled.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
do_queue_flip_on_crtc() is about to be used to flip buffers other than the
primary scanout (`ms->drmmode.fb_id`), so make it generic to accept any
frame buffer ID, as well as x and y coordinates in the frame buffer, to
flip on a given CRTC. Move the retry logic from queue_flip_on_crtc() into
it as well, so that it's robust for all callers.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Shadow buffers are about to be used for TearFree, so make the shadow buffer
helpers generic such that they can be used to create arbitrary per-CRTC
shadows aside from just the per-CRTC rotated buffer.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
xf86RotateCrtcRedisplay() is about to be used outside of xf86Rotate.c in
order to copy transformed pixmaps, so fix up its interface by specifying
the source drawable and destination pixmap rather than assuming the root
drawable and rotated pixmap, respectively. In addition, add an argument to
make xf86RotateCrtcRedisplay() not perform any transformations, which is an
indicator that it should only copy a transformed pixmap rather than
actually transform a pixmap.
These changes make it possible to use xf86RotateCrtcRedisplay() to not
only copy transformed pixmaps, but also actually transform pixmaps, making
it very useful outside of xf86Rotate.c.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Updated the for-loop that iterates over the received EGLConfigs to
include the very first EGLConfig with index 0.
Signed-off-by: Doğukan Korkmaztürk <dkorkmazturk@nvidia.com>
Fixes: 8469241592 - xwayland: Add EGL-backed GLX provider
The virgl driver exposes the name of the host renderer which might be llvmpipe.
In this case we still need glamor to be initialized.
Only check if the renderer starts with llvmpipe (which is what llvmpipe exposes).
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The current X server infrastructure sets modesetting driver as default driver
to handle PCI-hotplug of a GPU device. This prevents the respective DDX driver
(like AMDGPU DDX driver) to take control of the card.
This patch:
- Adds a few functions and fine-tunes the GPU hotplug infrastructure to allow
the DDX driver to be loaded, if it is configured in the X config file
options as "hotplug-driver".
- Scans and updates the PCI device list before adding the new GPU device
in platform, so that the association of the platform device and PCI device
is in place (dev->pdev).
- Adds documentation of this new option
An example usage in the config file would look like:
Section "OutputClass"
Identifier "AMDgpu"
MatchDriver "amdgpu"
Driver "amdgpu"
HotplugDriver "amdgpu"
EndSection
V2:
Fixed typo in commit message (Martin)
Added R-B from Adam.
Added ACK from Alex and Martin.
V3:
Added an output class based approach for finding the DDX driver (Aaron)
Rebase
V4:
Addressed review comment from Aaron:
GPU hot-plug handling driver's name to be read from the DDX config file options.
In this way only the DDX drivers interested in handling GPU hot-plug will be
picked and loaded, for others modesetting driver will be used as usual.
V5:
Addressed review comments from Aaron:
- X config option to be listed in CamelCase.
- Indentation fix at one place.
- Code readability related optimization.
V6:
Addressed review comments from Aaron:
- Squash the doc in the same patch
- Doc formatting changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Aaron Plattner aplattner@nvidia.com (v3)
Acked-by: Martin Roukala martin.roukala@mupuf.org(v1)
Acked-by: Alex Deucher alexander.deucher@amd.com (v1)
Reviewed-by: Adam Jackson ajax@redhat.com(v1)
Signed-off-by: Shashank Sharma shashank.sharma@amd.com
Current error:
ld: error: undefined symbol: xf86EnableIO
>>> referenced by xf86Configure.c
>>> libxorg_common.a.p/xf86Configure.c.o:(DoConfigure) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Events.c
>>> libxorg_common.a.p/xf86Events.c.o:(xf86VTEnter) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Init.c
>>> libxorg_common.a.p/xf86Init.c.o:(InitOutput) in archive hw/xfree86/common/libxorg_common.a
>>> referenced 1 more times
Commit 8a5f3ddb2 ("set tag on our surface") introduced the use of tags
to differentiate our own surfaces, and commit a1d14aa8c ("Clear the
"xwl-window" tag on unrealize") removed the tags before the surfaces are
actually destroyed.
Xwayland would then rely on these tags on the surface to decide whether
to ignore or to process the Wayland event in various places.
However, in doing so, it also checked for the tag on keyboard leave
events.
As a result, if the keyboard leave events is received after the X11
window is unrealized, keyboard_handle_leave() would not queue the
LeaveNotify events for the DIX to proceed, and the key repeat would
kick in and repeat the key event indefinitely.
To avoid the issue, process events regardless of the tag as before
in keyboard_handle_leave().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 8a5f3ddb2 - "xwayland: set tag on our surface"
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1395
Tested-by: Renan Guilherme Lebre Ramos <japareaggae@gmail.com>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Multiplanar GBM buffers can point to different objects from each plane.
Use the _for_plane API when possible to retrieve the correct prime FD
for each plane.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Guido Günther <agx@sigxcpu.org>
Check the fd for validity before giving a success return code.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Guido Günther <agx@sigxcpu.org>
Now that we keep the Wayland surface around for longer than the
xwl_window, we might get events for that surface after the X11 window
is unrealized.
Make sure we untag the Wayland surface when the Wayland surface is
delayed, to break the wl_surface/xwl_window relationship, so that events
for that surface are discarded by Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: e37f18ee9 - xwayland: Delay wl_surface destruction
a77d95af61 intended to do this, but the
check for “is this rootless or rootful XWayland” was inverted.
Fixes: a77d95af61 ("xwayland: Prevent Xserver grabs with rootless")
Signed-off-by: Demi Marie Obenour <demiobenour@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
hw/xwayland/xwayland.c:306:10: fatal error: 'X11/extensions/xwaylandproto.h' file not found
#include <X11/extensions/xwaylandproto.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 2700bc6045 ("xwayland: add support for the XWAYLAND extension")
X11 and Wayland requests are unordered, causing a race in the X11 window
and wl_surface association.
To mitigate that race, delay the wl_surface destruction by 1 second,
so that the compositor has time to establish the association before the
wl_surface is destroyed: to see both the wl_surface created and the
WL_SURFACE_ID X11 property set.
This is only a mitigation though, a more robust solution requires a
future dedicated Wayland protocol.
v2: Clean up pending wl_surface destroy on exit as well.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1157
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Joshua Ashton <joshua@froggi.es>
Tested-by: Sterophonick <sterophonick@gmail.com>
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/163
Changes check for trying modesetting driver from if defined(__linux__)
to use meson check for if we built the driver for this platform.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Because of the design of most Wayland compositors, where the compositor
is both a Wayland server and an X11 window manager, any X11 client
issuing a server grab (i.e. XGrabServer()) can possibly hang the whole
desktop when Xwayland is running rootless.
This can happen with e.g. ImageMagick's import command with mutter.
1. "import" is launched and issues an XServerGrab(),
2. Xwayland restricts access to that "import" X11 client alone,
3. mutter continues to process events until it needs to sync with
Xwayland (there's variability in time before the hang occurs),
4. When mutter does an XSync() (explicitly or implicitly through some
other Xlib call), it will stop waiting for Xwayland to reply,
5. Xwayland waits for the XServerGrab() to be released by import,
6. "import" waits for a user input to release the XServerGrab(),
7. mutter is stuck waiting on Xwayland and does not process input
events...
To prevent this, re-route the GrabServer/UngrabServer requests and
pretend the grab works but actually does nothing at all for all clients
but the X11 window manager (which can still issue X11 server grabs, at
its own risks).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://bugzilla.redhat.com/1914021
I wanted to simplify the logic, and thought this is a good opportunity
to eliminate local diffs.
I don't want to list OSes without wsfb, because I understand that is a
netbsd/openbsd driver, and always have it as a fallback for us.
Additionally, I understand "fbdev" is linux-specific, so have the logic
match this intent.
Fixes accidentally taking the WL_POINTER_AXIS_HORIZONTAL_SCROLL case as
well after the WL_POINTER_AXIS_VERTICAL_SCROLL case, which resulted in
vertical wheel events triggering both vertical and horizontal scrolling.
Fixes: e37eeb7af2 ("xwayland: Aggregate scroll axis events to fix kinetic scrolling")
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1367
This extension exists to serve one purpose: reliably identifying
Xwayland. Previous attempts at doing so included querying root window
properties, output names or input device names. All these attempts are
somewhat unreliable. Instead, let's use an extension - where that
extension is present we have an Xwayland server.
Clients should never need to do anything but check whether the extension
exists through XQueryExtension or search through XListExtensions.
This extension provides a single QueryVersion request only, and
that is only to provide future compatibility if we ever need anything
other than "this extension exists" functionality.
https://gitlab.freedesktop.org/xorg/proto/xorgproto/-/merge_requests/54
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not that it actually matters since the typedef is int32_t anyway, but
this theoretically avoids an erroneous call to wl_fixed_to_double() on
that value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 7cdcdfea0 introduced a new command line option
"-force-xrandr-emulation", however it is missing from the
ddxProcessArgument().
As a result, trying to use that command option would result in a error:
(EE) Unrecognized option: -force-xrandr-emulation
Make sure "-force-xrandr-emulation" is accounted for in Xwayland's
ddxProcessArgument().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 7cdcdfea0 - xwayland: Add -force-xrandr-emulation switch
Pointer scroll events are collected in xwl_seat->pending_pointer_event
as they are received in the pointer_handle_axis and
pointer_handle_axis_discrete callbacks. They are dispatched together as a
single event when pointer_handle_frame is called which "Indicates the end of a
set of events that logically belong together" [1]. This patch also sends an
event with dx=0, dy=0 when pointer_handle_axis_stop is called, which is what
allows XWayland clients to recognise the end of a touchpad scroll.
[1] https://wayland.app/protocols/wayland#wl_pointer:event:frame
Signed-off-by: David Jacewicz <david.jacewicz27@protonmail.com>
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/926
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When running rootful, the Xwayland window is not decorated (as all
Wayland surfaces), which makes it quite inconvenient to move on screen.
libdecor is "a client-side decorations library for Wayland clients"
which can be used precisely for adding decorations to Wayland surfaces.
Add optional support for libdecor in Xwayland to gain decorations when
running rootful and a new command line option "-decorate".
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1332
That allows to differentiate Xwayland's own surfaces from others.
This is preparation work for optional libdecor support.
v2: Check for surface not being NULL (Jonas Ådahl <jadahl@gmail.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The app_id is used to identify applications (and group windows), some
desktops (such as GNOME Shell) use it in their top bar.
Set the XDG toplevel "app_id" to "org.freedesktop.Xwayland" and install
a desktop file for Xwayland rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
So that when running rootful, the compositor can close the Xwayland
window using the xdg-toplevel protocol.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Set a meaningful title for the xdg_surface, it's nicer when running
rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Currently, when running rootful, the toplevel root surface is created in
the same function as the rest of the Wayland surfaces.
Move it to its own function to improve readability - No function change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-host-grab" to disable the keyboard
shortcuts and confine the pointer on the host so that Xwayland can
receive all keyboard events.
This is useful when running a complete desktop environment within
Xwayland rootful.
Use [CTRL]+[SHIFT] to release the keyboard and pointer.
This option is not compatible with rootless mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland tries to be smart and guess the intention of the X11 clients
sometimes, like issuing a pointer lock when a client hides the pointer
when confined.
While this is a good thing when running rootless, this is problematic
when running rootful as the pointer will be automatically locked unless
the "retro" mode is used (which doesn't hide the cursor, unlike the
default).
Make sure we don't trigger the automatic pointer lock when the cursor is
hidden when running rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-fullscreen" to make the rootful Xwayland
window appear fullscreen.
This requires viewport support in the compositor and when used with
"-geometry" can emulate the full range of XRandR resolutions.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When updating the overall screen size, Xwayland would first walk the
window tree then update both the xwl_screen and screen size.
As a result, if any ResizeWindow() handler tries to use the xwl_screen
size, it would get the old (wrong) size instead of the new one.
Make sure to update the xwl_screen size first, prior to traverse the
window tree.
This is preparation work for Xwayland fullscreen mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When using xrandr emulation, the emulated mode is passed as a pointer to
the XRandR mode from the xwl_output associated with the X11 client.
In preparation for fullscreen mode, we want to be able to reuse that
code but use a separate emulated mode.
Simply change the internal API to pass a reference to the emulated mode.
This introduces no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The xdg_toplevel object was used solely when creating the window
surface, and the value of the object discarded.
To be able to make the surface fullscreen using the xdg_toplevel
protocol, we need to have access that object, so keep it around along
with the xwl_window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of the output the surface enters/leaves.
This is fairly basic tracking though, we do not keep a full list of
outputs a surface may be covering partially, we just keep the output
the surface entered last.
This is sufficient as a preparation work for fullscreen though.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a convenient function to get the xwl_output from a given wl_output.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When running rootless as well as rootful, Xwayland gets its outputs
configuration from the Wayland compositor.
When running rootful, it means that we end up with a large black
surface the size of all monitors combined, that's not very convenient
and there is no way for set the desired size of the Xwayland window.
Add a new command line option "-geometry" to force a specific mode when
running rootful for the user to specify the root window size to use for
Xwayland.
That option has no effect when Xwayland is running rootless.
v2: Not using libxcvt as the mode may not be a valid CVT mode.
v3: Add a set of XRandR modes and the RR hooks to make that work.
Update the man page for Xwayland.
v4: Add RandR 1.0 support for older clients
v5: Fix XVidMode failing with a BadMatch
v6: Add a separate xwl_output specifically for fixed mode, instead of
using the existing output list - that will allow for further
improvements like a fullscreen mode eventually.
v7: Sort the RR modes
v8: Fix RandR 1.0
v9: Add physical size
v10: Cleanup
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1338
update_screen_size() takes an xwl_output argument, mostly for historical
reasons, whereas it actually applies to a screen (as its name implies).
Reshuffle the code to take an xwl_screen instead, in preparation for
the geometry mode in Xwayland - No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland uses an output serial number it increments each time a new
Wayland output is added.
On server regeneration, that static value is not cleared, and therfore
the output numbers keep increasing each time the Xserver restarts.
To avoid that issue, make the output serial part of the xwl_screen,
which gets recreated on server regeneration, so that index is reset to 0
automatically on server regeneration.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland's own SetWindowPixmap() handler would be ignored when running
rootful.
This is fine as long as we do not plan to resize the root window,
however this is becoming problematic if we plan to resize the root
window dynamically when running rootful.
Just add the xwl_window_set_window_pixmap() handler regardless of
rootful/rootless mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The function xwl_output_remove() is called when removing a monitor, but
the actual status of the RandR output does not change.
So, when RRTellChanged() is called from update_screen_size(), it won't
have the output connection status up to date in the RandR event
RROutputChangeNotifyEvent and X11 applications relying on that event
like Qt will fail to emit their signal QGuiApplication::screenRemoved.
To avoid that issue, make sure to mark the RandR output as disconnected
prior to call xwl_output_remove().
Fix commit 204f10c29 ("xwayland: Call RRTellChanged if the RandR configuration may have changed")
Signed-off-by: zhoulei <zhoulei@kylinos.cn>
Signed-off-by: Morose <chenlinxiang@kylinos.cn>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Move the xcb_aux_sync into the shm path, where we do still need it to
synchronize access with the host. In the non-shm path the image is
copied to the host anyway so the sync just adds latency and keeps you
from using all your network bandwidth.
Only the non-shm-putimage path benefits from this, but the benefit is
significant even on the local machine (here a 3.2GHz Core i7-8700, using
XEPHYR_NO_SHM=1):
before after Operation
------------ -------------------- -------------------------
228000000.0 225000000.0 (0.987) Dot
40900000.0 41600000.0 (1.017) 1x1 rectangle
10400000.0 10700000.0 (1.029) 10x10 rectangle
477000.0 471000.0 (0.987) 100x100 rectangle
30900.0 31800.0 (1.029) 500x500 rectangle
760000.0 981000.0 (1.291) PutImage 10x10 square
14700.0 19200.0 (1.306) PutImage 100x100 square
320.0 382.0 (1.194) PutImage 500x500 square
749000.0 984000.0 (1.314) ShmPutImage 10x10 square
268000.0 304000.0 (1.134) ShmPutImage 100x100 square
16600.0 18500.0 (1.114) ShmPutImage 500x500 square
Reviewed-by: Emma Anholt <emma@anholt.net>
When the pointer leaves an X11 window, and enters a Wayland native
window, Xwayland has no idea about Wayland native windows and may
generate the wrong crossing events to another X11 window instead.
To avoid that issue, Xwayland implements its own XYToWindow() handler to
compare the Wayland focused surface with the X11 window found in the
window tree.
Commit 59ad0e6a ("xwayland: Fix use after free of cursors") changed the
logic in sprite_check_lost_focus() to use IsParent() to compare the
windows, which works when the X11 window is reparented by the window
manager, but fails in the case of an override redirect window.
To fix the issue, also check whether last_xwindow is the window itself.
Signed-off-by: Morose <chenlinxiang@kylinos.cn>
Fixes: 59ad0e6a - xwayland: Fix use after free of cursors
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
../hw/xfree86/ddc/print_edid.c:511:20: error: format specifies type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat]
det_mon->type - DS_VENDOR);
^~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Adds a -force-xrandr-emulation cmdline switch that always exposes extra
modes when viewporter isn't exposed by the Wayland compositor.
Having the additional modes exposed by the X server is important for
games to function and be configured
Compositors, such as Gamescope (the compositor for Steam Deck),
support only a single window that is rendered in the centre of the
screen that is scaled up to fill the screen by the compositor based
on some user scaling settings.
Exposing viewporter, wouldn't make sense here, and could mislead native
Wayland clients, so exposing dummy modesets in X is preferred here.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Adds the following 16:10 modes primarily for scaling up on Steam Deck:
- 1152x720
- 960x600
- 928x580
- 800x500
- 768x480
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Xwayland does not change the actual XRANDR setup for real, it just
emulates the resolution changes using viewports in Wayland.
With a single output, if an X11 applications tries to change the CRTC
back to the native mode, RRCrtcSet() will simply ignore the request as
no actual change is induced by this.
Set the property "RANDR Emulation" on all Xwayland outputs to make sure
the optimizations in RRCrtcSet() get skipped and Xwayland can receive
and act upon the client request.
Also make sure we do not allow that property to be changed by X11
clients.
v2: Prevent X11 clients from changing the property value
(Pekka Paalanen <pekka.paalanen@collabora.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1305
drm_lease_device_handle_released uses the wrong pointer type in the
callback. This will cause crash when compositor removes drm lease device
object.
Fixes: 089e7f98f - Xwayland: implement drm-lease-v1
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Weng Xuetian <wengxt@gmail.com>
Finishes the work started in commit cd0d4c1bb5
to remove checks for the variable that never varied from 0 after the code
to change it was removed by commit 511c60bc73
in 2006 (xorg-server-1.2.0).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Fixes LGTM warnings:
* Import of 'cProfile' is not used.
* Import of 'pdb' is not used.
* Import of 'string' is not used.
* Import of 'time' is not used.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Fixes LGTM warning "This parameter of type drmModeModeInfo is 68 bytes -
consider passing a const pointer/reference instead."
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Correctness is ensured be checking md5sum result before and after the
commit (it's the same).
Fixes LGTM warning "Comparison is always false because numTimings <= 0."
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Makes the 4-byte cases match those for 1- & 2-byte handling,
moving the break from being unconditionally hit the first time
through the to loop to after the loop is done.
Fixes Solaris Studio compiler warnings:
"prim_ops.c", line 2626: warning: end-of-loop code not reached
"prim_ops.c", line 2692: warning: end-of-loop code not reached
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
switch_to() is only used from #ifdef HAS_USL_VTS code, place it inside
ifdefs to to avoid unused static warning and compile error on systems
without VT_ACTIVATE and VT_WAITACTIVE defines.
Even if there's no pending frame callback yet.
Without this, if there was no pending frame callback yet in
xwl_present_queue_vblank, xwl_present_msc_bump would only get called
from xwl_present_timer_callback, resulting in the MSC ticking at ~58
Hertz.
Doing this requires some adjustments elsewhere:
1. xwl_present_reset_timer needs to check for a pending frame callback
as well.
2. xwl_window_create_frame_callback needs to call
xwl_present_reset_timer for all child windows hooked up to
frame_callback_list, to make sure the timer length takes the pending
frame callback into account.
3. xwl_present_flip needs to hook up the window to frame_callback_list
before calling xwl_window_create_frame_callback, for 2. to work.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1309
Fixes: 9b31358c52 ("xwayland: Use frame callbacks for Present vblank events")
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Without this, xwl_present_reset_timer would call
xwl_present_timer_callback if the timer was originally armed over a
second ago. xwl_present_timer_callback would call xwl_present_msc_bump,
which could end up hooking up the window to
xwl_window->frame_callback_list again. This would lead to use-after-free
in xwl_present_cleanup:
Invalid write of size 8
at 0x42B65C: __xorg_list_del (list.h:183)
by 0x42B693: xorg_list_del (list.h:204)
by 0x42C041: xwl_present_cleanup (xwayland-present.c:354)
by 0x423669: xwl_destroy_window (xwayland-window.c:770)
by 0x4FDDC5: compDestroyWindow (compwindow.c:620)
by 0x5233FB: damageDestroyWindow (damage.c:1590)
by 0x501C5F: DbeDestroyWindow (dbe.c:1326)
by 0x4EF35B: FreeWindowResources (window.c:1018)
by 0x4EF687: DeleteWindow (window.c:1086)
by 0x4E24B3: doFreeResource (resource.c:885)
by 0x4E2ED7: FreeClientResources (resource.c:1151)
by 0x4ACBA4: CloseDownClient (dispatch.c:3546)
Address 0x12f44980 is 144 bytes inside a block of size 160 free'd
at 0x48470E4: free (vg_replace_malloc.c:872)
by 0x423115: xwl_unrealize_window (xwayland-window.c:621)
by 0x4FCDD8: compUnrealizeWindow (compwindow.c:292)
by 0x4F3F5C: UnrealizeTree (window.c:2805)
by 0x4F424B: UnmapWindow (window.c:2863)
by 0x4EF58C: DeleteWindow (window.c:1075)
by 0x4E24B3: doFreeResource (resource.c:885)
by 0x4E2ED7: FreeClientResources (resource.c:1151)
by 0x4ACBA4: CloseDownClient (dispatch.c:3546)
by 0x5E27EE: ClientReady (connection.c:599)
by 0x5E6CB7: ospoll_wait (ospoll.c:657)
by 0x5DE6CD: WaitForSomething (WaitFor.c:208)
Block was alloc'd at
at 0x4849464: calloc (vg_replace_malloc.c:1328)
by 0x4229CE: ensure_surface_for_window (xwayland-window.c:439)
by 0x4231E8: xwl_window_set_window_pixmap (xwayland-window.c:647)
by 0x5232D6: damageSetWindowPixmap (damage.c:1565)
by 0x4FC7BC: compSetPixmapVisitWindow (compwindow.c:129)
by 0x4EDB3F: TraverseTree (window.c:441)
by 0x4FC851: compSetPixmap (compwindow.c:151)
by 0x4F8C1A: compAllocPixmap (compalloc.c:616)
by 0x4FC938: compCheckRedirect (compwindow.c:174)
by 0x4FCD1D: compRealizeWindow (compwindow.c:274)
by 0x4F36EC: RealizeTree (window.c:2606)
by 0x4F39F5: MapWindow (window.c:2683)
Fixes: 288ec0e046 ("xwayland/present: Run fallback timer callback after more than a second")
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When a window is unrealized, Xwayland would destroy the Wayland surface
prior to unrealizing the present window.
xwl_present_flip() will then do a wl_surface_commit() of that surface,
hence causing a use-after-free:
Invalid read of size 8
at 0x49F7FD4: wl_proxy_marshal_array_flags (wayland-client.c:852)
by 0x49F823A: wl_proxy_marshal_flags (wayland-client.c:784)
by 0x42B877: wl_surface_commit (wayland-client-protocol.h:3914)
by 0x42CAA7: xwl_present_flip (xwayland-present.c:717)
by 0x42CD0E: xwl_present_execute (xwayland-present.c:783)
by 0x42C26D: xwl_present_msc_bump (xwayland-present.c:416)
by 0x42C2D1: xwl_present_timer_callback (xwayland-present.c:433)
by 0x42BAC4: xwl_present_reset_timer (xwayland-present.c:149)
by 0x42D1F8: xwl_present_unrealize_window (xwayland-present.c:945)
by 0x4230E2: xwl_unrealize_window (xwayland-window.c:616)
by 0x4FCDD8: compUnrealizeWindow (compwindow.c:292)
by 0x4F3F5C: UnrealizeTree (window.c:2805)
Address 0x1390b8d8 is 24 bytes inside a block of size 80 free'd
at 0x48470E4: free (vg_replace_malloc.c:872)
by 0x49F8029: wl_proxy_destroy_caller_locks (wayland-client.c:523)
by 0x49F8029: wl_proxy_marshal_array_flags (wayland-client.c:861)
by 0x49F823A: wl_proxy_marshal_flags (wayland-client.c:784)
by 0x421984: wl_surface_destroy (wayland-client-protocol.h:3672)
by 0x423052: xwl_unrealize_window (xwayland-window.c:599)
by 0x4FCDD8: compUnrealizeWindow (compwindow.c:292)
by 0x4F3F5C: UnrealizeTree (window.c:2805)
by 0x4F424B: UnmapWindow (window.c:2863)
by 0x4EF58C: DeleteWindow (window.c:1075)
by 0x4E24B3: doFreeResource (resource.c:885)
by 0x4E2ED7: FreeClientResources (resource.c:1151)
by 0x4ACBA4: CloseDownClient (dispatch.c:3546)
Block was alloc'd at
at 0x4849464: calloc (vg_replace_malloc.c:1328)
by 0x49F7F29: zalloc (wayland-private.h:233)
by 0x49F7F29: proxy_create (wayland-client.c:422)
by 0x49F7F29: create_outgoing_proxy (wayland-client.c:664)
by 0x49F7F29: wl_proxy_marshal_array_flags (wayland-client.c:831)
by 0x49F823A: wl_proxy_marshal_flags (wayland-client.c:784)
by 0x4218CA: wl_compositor_create_surface (wayland-client-protocol.h:1291)
by 0x422A0D: ensure_surface_for_window (xwayland-window.c:445)
by 0x4231E8: xwl_window_set_window_pixmap (xwayland-window.c:647)
by 0x5232D6: damageSetWindowPixmap (damage.c:1565)
by 0x4FC7BC: compSetPixmapVisitWindow (compwindow.c:129)
by 0x4EDB3F: TraverseTree (window.c:441)
by 0x4FC851: compSetPixmap (compwindow.c:151)
by 0x4F8C1A: compAllocPixmap (compalloc.c:616)
by 0x4FC938: compCheckRedirect (compwindow.c:174)
To avoid that, call xwl_present_unrealize_window() before destroying the
Wayland surface.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The composite overlay window (COW) can be queried from any X11 client,
not just the X11 compositing manager.
If a client tries to get the composite overlay window, the Xserver will
map the window and block all pointer events (the window being mapped and
on top of the stack).
To avoid that issue, unset the "mapped" state of the composite overlay
window once realized when Xwayland is running rootless.
Note: All Xservers are actually affected by this issue, but with most
regular X servers, the compositing manager will take care of dealing
with the composite overlay window, and an X11 client using
GetOverlayWindow() won't break pointer events for all X11 clients.
Wayland compositors however usually run Xwayland rootless and have no
use for the COW.
v2: Avoid registering damage for the COW (Michel)
v3: Remove the "mapped" test to avoid calling register_damage() if the
COW is not mapped (Michel)
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1314
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This fixes address sanitizer errors when running unit tests. The
additional copying may reduce performance by a small amount, but we
don't care about that because this driver is used for testing only.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
When using colored X11 cursors, the colors would appear wrong, yellow
would show white, green would show as cyan, and blue would show black
whereas red would show fine.
This is because the code expanding the cursor data accounts for green
for both green and blue channels. Funnily this bug has been there from
the beginning.
Fix the issue by correctly account for the color channels.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1303
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
After a change for the xserver to automatically determine the seat
based on the XDG_SEAT variable, xephyr stopped working. This was
because of an old feature where xephyr used to handle evdev
directly. This was dropped some time ago, and now this check is
not needed
Put in a workaround to accept devices of the kernel's hyperv_drm
driver. Makes Xorg work on HyperV Gen 1/2 with the DRM graphics
stack.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Xwayland may open a fair amount of file descriptors for passing Wayland
buffers, even more so when using the `wl_shm` either for the pointer
cursors or for when GLAMOR is not usable.
As a result, Xwayland may hit the (soft) limit of file descriptors
leading to a Wayland protocol error and the termination of Xwayland.
To mitigate that risk, raise the limit to the maximum (hard) limit of
file descriptors (unless of course the limit was set explicitly from the
command line with "-lf").
Note that for completeness, the Wayland compositor may have to do the
same, otherwise the limit might get reached on the compositor side as
well.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1283
If the Wayland compositor doesn't send a pending frame event, e.g.
because the Wayland surface isn't visible anywhere, it could happen that
the timer kept getting pushed back and never fired. This resulted in an
enormous list of pending vblank events, which could take minutes to
process when the frame event finally arrived.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1110
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Jaap Buurman <jaapbuurman@gmail.com>
If there is one platform device, which is not paused nor resumed,
systemd_logind_vtenter() will never get called.
This break suspend/resume, and switching to VT on system with Nvidia
proprietary driver.
This is a regression introduced by f5bd039633
So now call systemd_logind_vtenter() if there are no paused
platform devices.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1271
Fixes: f5bd0396 - xf86/logind: fix call systemd_logind_vtenter after receiving drm device resume
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is minor, but that error message says a wrong function name.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Initially reported downstream in Gentoo. Manifests with errors like:
```
gnu/bin/ld: hw/xfree86/common/libxorg_common.a(xf86fbBus.c.o): in function `xf86ClaimFbSlot':
xf86fbBus.c:(.text+0x20): undefined reference to `sbusSlotClaimed'
/usr/lib/gcc/sparc-unknown-linux-gnu/11.2.0/../../../../sparc-unknown-linux-gnu/bin/ld: xf86fbBus.c:(.text+0x2c): undefined reference to `sbusSlotClaimed'
```
While we use the headers in meson.build, we don't reference xf86sbusBus.c
which defines the missing symbols like sbusSlotClaimed.
Bug: https://bugs.gentoo.org/828513
Signed-off-by: Sam James <sam@gentoo.org>
This commit allows X11 clients running through Xwayland to lease
non-desktop connectors from the Wayland compositor by implementing
support for drm-lease-v1.
In order to not deadlock with the Wayland compositor if its response
to a lease request is delayed, the new interface in _rrScrPriv
introduced in the last commit is used, which makes it possible to
block the X11 client while a response is pending.
Leasing normal outputs is not yet supported, all connectors offered
for lease will be advertised as non-desktop.
Co-authored-by: Xaver Hugl <xaver.hugl@gmail.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Add a new interface to _rrScrPriv to make it possible for the server to
delay answering a lease request, at the cost of blocking the client. This
is needed for implementing drm-lease-v1, as the Wayland protocol has no
defined time table for responding to lease requests.
Signed-off-by: Xaver Hugl <xaver.hugl@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
This was overlooked when converting the function to use libxcvt.
Bring back name initialization from old code.
This was causing a segfault in xf86LookupMode() if modes where
name is NULL are present the modePool list.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
The compositor may send us wl_seat and its capabilities before sending
e.g. relative_pointer_manager or pointer_gesture interfaces. This would
result in devices being created in capabilities handler, but listeners
not, because the interfaces weren't available at the time. So we
manually attempt to setup listeners again.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
The implementation is relatively straightforward because both wayland
and Xorg use libinput semantics for touchpad gestures.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Currently, when given the choice, Xwayland will pick the GBM backend
over the EGLstream backend if both are available, unless the command
line option “-eglstream” is specified.
The NVIDIA proprietary driver had no support for GBM until driver series
495, but starting with the driver series 495, both can be used.
But there are other requirements with the rest of the stack, typically
Mesa, egl-wayland, libglvnd as documented in the NVIDIA driver.
So if the NVIDIA driver series 495 gets installed, Xwayland will pick
the GBM backend even if EGLstream is available and may fail to render
properly.
To avoid that issue, prefer EGLstream if EGLstream and all the Wayland
interfaces are available, and fallback to GBM automatically unless
“-eglstream” was specified.
With this, the compositor, given the choice, can decide which actual
backend Xwayland would use by advertising (or not) the Wayland
"wl_eglstream_controller" interface.
This change has no impact on compositors which do not have support for
EGLstream in the first place.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Add (verbose) statements to trace the actual backend used with glamor.
That can be useful for debugging.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
On a normal startup sequence, the Xwayland glamor backend would log
an error whenever a required Wayland protocol is missing.
Those are not really errors though, more informational messages along
the glamor backend selection process.
Demote those errors to verbose messages to reduce the verbosity of
Xwayland at startup by default.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If no EGLstream capable device is found at startup, Xwayland's EGLstream
backend will log an error message "glamor: No eglstream capable devices
found".
However, considering that the vast majority of drivers do not implement
EGLstream, the lack of EGLstream capable device is more of the norm than
the exception.
Change the error message to a log verbose message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
When switching to VT, the ioctl DRM_DROP_MASTER must be done before
the ioctl VT_RELDISP. Otherwise the kernel can't change the modesetting
reliably, and this leads to the console not showing up in some cases, like
after unplugging a docking station with a DP or HDMI monitor.
Before doing the VT_RELDISP, send a dbus message to logind, to
pause the drm device, so logind will do the ioctl DRM_DROP_MASTER.
With this patch, it changes the order logind will send the resume
event, and drm will be sent last instead of first.
so there is a also fix to call systemd_logind_vtenter() at the right time.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
logind send the resume event for input devices and drm device,
in any order. if we call vt_enter before logind resume the drm device,
it leads to a driver error, because logind has not done the
DRM_IOCTL_SET_MASTER on it.
Keep the old workaround to make sure we call systemd_logind_vtenter at
least once if there are no platform device
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Quite a lot of applications currently expect the screen DPI exposed by
the X server to be 96 even when the real display DPI is different.
Additionally, currently Xwayland completely ignores any hardware
information and sets the DPI to 96. Accordingly the new behavior, even
if it fixes a bug, should not be enabled automatically to all users.
A better solution would be to make the default DPI stay as is and enable
the correct behavior with a command line option (maybe -dpi auto, or
similar). For now let's just revert the bug fix.
This reverts commit 05b3c681ea.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
We were storing the pointer to struct glamor_context. However, glamor
itself is storing the EGLContext pointer since the commit below. Since
the two values could never be equal, this resulted in constant
superfluous eglMakeCurrent calls. The implicit glFlush triggered by
those couldn't be good for performance.
Fixes: 7c88977d33 "glamor: Store the actual EGL/GLX context pointer in lastGLContext"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
The code to clear a cursor pending frame callback was duplicated in
multiple places in the code.
Introduce a new xwl_cursor_clear_frame_cb() function and remove the
duplicated code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
It just make more sense to keep xwl_cursor_release() with the rest of
the cursor code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Two different functions in xwayland-cursor.c and xwayland-input.c use
the same name xwl_seat_update_cursor() which is confusing when reading
the code.
Rename xwl_seat_update_cursor() to xwl_seat_update_all_cursors() in
xwayland-cursor.c to help with readability of the code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Passing -noTouchPointerEmulation results in an error about the
flag not being recognized.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 7d34b1f2b7 ("xwayland: add -noTouchPointerEmulation")
If the tablet tool is moved out of proximity before the cursor's pending
frame callback is received, any further attempts to update the cursor
will fail because the frame callback is still pending.
Make sure to clear any cursor pending frame when the tool gets in
proximity again, similar to what we do when the pointer re-enters a
surface, so that the cursor updates aren't discarded.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/1969
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Some clients (typically Java, but maybe others) rely on ConfigureNotify
or RRScreenChangeNotify events to tell that the XRandR request is
successful.
When emulated XRandR is used in Xwayland, compute the emulated root size
and send the expected ConfigureNotify and RRScreenChangeNotify events
with the emulated size of the root window to the asking X11 client.
Note that the root window size does not actually change, as XRandR
emulation is achieved by scaling the client window using viewports in
Wayland, so this event is sort of misleading.
Also, because Xwayland is using viewports, emulating XRandR does not
reconfigure the outputs location, meaning that the actual size of the
root window which encompasses all the outputs together may not change
in a multi-monitor setup. To work around this limitation, when using an
emulated mode, we report the size of that emulated mode alone as the
root size for the configure notify event.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
SimpleDRM 'devices' are a fallback device, and do not have a busid
so they are getting skipped. This will allow simpledrm to work
with the modesetting driver
The "sync crtc" is the crtc used to drive the display timing of a
drawable under DRI2 and DRI3/Present. If a drawable intersects
multiple video outputs, then normally the crtc is chosen which has
the largest intersection area with the drawable.
If multiple outputs / crtc's have exacty the same intersection
area then the crtc chosen was simply the first one with maximum
intersection. Iow. the choice was random, depending on plugging
order of displays.
This adds the ability to choose a preferred output in such a tie
situation. The RandR output marked as "primary output" is chosen
on such a tie.
This new behaviour and its implementation is consistent with other
video ddx drivers. See amdgpu-ddx, ati-ddx and nouveau-ddx for
reference. This commit is a straightforward port from amdgpu-ddx.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
In a setup with both VRR capable and non-VRR capable displays,
it was so far inconsistent if the driver would allow use of
VRR support or not, as "is_connector_vrr_capable" was set to
whatever the capabilities of the last added drm output were.
Iow. the plugging order of monitors determined the outcome.
Fix this: Now if at least one display is VRR capable, the driver
will treat an X-Screen as capable for VRR, plugging order no
longer matters.
Tested with a dual-display setup with one VRR monitor and one
non-VRR monitor. This is also beneficial with the new Option
"AsyncFlipSecondaries".
When we are at it, also add some so far missing description of
the "VariableRefresh" driver option, copied from amdgpu-ddx.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
A lut size of 4096 slots has been verified to work correctly,
as tested with amdgpu-kms. Intel Tigerlake Gen12 hw has a very
large GAMMA_LUT size of 262145 slots, but also issues with its
current GAMMA_LUT implementation, as of Linux 5.14.
Therefore we keep GAMMA_LUT off for large lut's. This currently
excludes Intel Icelake, Tigerlake and later.
This can be overriden via the "UseGammaLUT" boolean xorg.conf option
to force use of GAMMA_LUT on or off.
See following link for the Tigerlake situation:
https://gitlab.freedesktop.org/drm/intel/-/issues/3916#note_1085315
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
With the GBM backend becoming usable with different drivers such as
NVIDIA, set the GLVND vendor to the same value as the GBM backend name.
Mesa implementation however returns "drm" so we need to special case
this value - Basically, for anything other than "drm" we simply assume
that the GBM backend name is the same as the vendor.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Tested-by: James Jones <jajones@nvidia.com>
Xwayland was passing GBM bos directly to
eglCreateImageKHR using the EGL_NATIVE_PIXMAP_KHR
target. Given the EGL GBM platform spec claims it
is invalid to create a EGLSurface from a native
pixmap on the GBM platform, implying there is no
mapping between GBM objects and EGL's concept of
native pixmaps, this seems a bit questionable.
This change modifies the bo import function to
extract all the required data from the bo and then
imports it as a dma-buf instead when the dma-buf +
modifiers path is available.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Xwayland's xwl_shm_create_pixmap() computes the size of the shared
memory pool to create using a size_t, yet the Wayland protocol uses an
integer for that size.
If the pool size becomes larger than INT32_MAX, we end up asking Wayland
to create a shared memory pool of negative size which in turn will raise
a protocol error which terminates the Wayland connection, and therefore
Xwayland.
Avoid that issue early by return a NULL pixmap in that case, which will
trigger a BadAlloc error, but leave Xwayland alive.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This reverts commit 617f591fc4.
The problem described in that commit exists, but the two
preceeding commits with improvements to the servers RandR
code should avoid the mentioned problems while allowing the
use of GAMMA_LUT's instead of legacy gamma lut.
Use of legacy gamma lut's is not a good fix, because it will reduce
color output precision of gpu's with more than 1024 GAMMA_LUT
slots, e.g., AMD, ARM MALI and KOMEDA with 4096 slot luts,
and some Mediathek parts with 512 slot luts. On KOMEDA, legacy
lut's are completely unsupported by the kms driver, so gamma
correction gets disabled.
The situation is especially bad on Intel Icelake and later:
Use of legacy gamma tables will cause the kms driver to switch
to hardware legacy lut's with 256 slots, 8 bit wide, without
interpolation. This way color output precision is restricted to
8 bpc and any deep color / HDR output (10 bpc, fp16, fixed point 16)
becomes impossible. The latest Intel gen gpu's would have worse
color precision than parts which are more than 10 years old.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
The assumption in the upsampling code was that the crtc->gamma_size
size of the crtc's gamma table is a power of two. This is true for
almost all current driver + gpu combos at least on Linux, with typical
sizes of 256, 512, 1024 or 4096 slots.
However, Intel Gen-11 Icelake and later are outliers, as their gamma
table has 2^18 + 1 slots, very big and not a power of two!
Try to make upsampling behave at least reasonable: Replicate the
last gamma value to fill up remaining crtc->gamma_red/green/blue
slots, which would normally stay uninitialized. This is important,
because while the intel display driver does not actually use all
2^18+1 values passed as part of a GAMMA_LUT, it does need the
very last slot, which would not get initialized by the old code.
This should hopefully create reasonable behaviour with Icelake+
but is untested on the actual Intel hw due to lack of suitable
hw.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
If randrp->palette_size is zero, the memcpy() path can read past the
end of the randr_crtc's gammaRed/Green/Blue tables if the hw crtc's
gamma_size is greater than the randr_crtc's gammaSize.
Avoid this by clamping the to-be-copied size to the smaller of both
sizes.
Note that during regular server startup, the memcpy() path is only
taken initially twice, but then a suitable palette is created for
use during a session. Therefore during an actual running X-Session,
the xf86RandR12CrtcComputeGamma() will be used, which makes sure that
data is properly up- or down-sampled for mismatching source and
target crtc gamma sizes.
This should avoid reading past randr_crtc gamma memory for gpu's
with big crtc->gamma_size, e.g., AMD/MALI/KOMEDA 4096 slots, or
Intel Icelake and later with 262145 slots.
Tested against modesetting-ddx and amdgpu-ddx under screen color
depth 24 (8 bpc) and 30 (10 bpc) to make sure that clamping happens
properly.
This is an alternative fix for the one attempted in commit
617f591fc4.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
We turn this on if the GL underneath us can enable GL_FRAMEBUFFER_SRGB.
We do try to generate both capable and incapable configs, which is to
keep llvmpipe working until the client side gets smarter about its srgb
capabilities.
xwl_present_reset_timer checks if the pending flip is synchronous, so
we need to call it after adding the pending flip to the flip queue.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1219
Fixes: b2a06e0700 "xwayland/present: Drop sync_flip member of struct xwl_present_window"
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Rotation is broken for all drm drivers not providing hardware rotation
support. Drivers that give direct access to vram and not needing dirty
updates still work but only by accident. The problem is caused by
modesetting not sending the correct fb_id to drmModeDirtyFB() and
passing the damage rects in the rotated state and not as the crtc
expects them. This patch takes care of both problems.
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
This is not actually a change for xwayland with gbm, or for xfree86 with
big-GL, but we do change them as well to use EGL_NO_CONFIG_KHR
explicitly.
Reviewed-by: Emma Anholt <emma@anholt.net>
There's no real benefit to using GLX, and the other DDXes are using EGL
already, so let's converge on EGL so we can concentrate the fixes in one
place.
We go to some effort to avoid being the thing that requires libX11 here.
We prefer EGL_EXT_platform_xcb over _x11, and if forced to use the
latter we'll ask the dynamic linker for XGetXCBConnection and
XOpenDisplay rather than link against xlib stuff ourselves. Xephyr is
now a pure XCB application if it can be.
Reviewed-by: Emma Anholt <emma@anholt.net>
Due to a typo in tablet_pad_group(), we would allocate a variable
("group") and test another one ("pad") for allocation success.
Spotted by covscan.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: commit 8475e63 - "xwayland: add tablet pad support"
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
On screen init, if any of the private type registration fails we would
return FALSE without actually freeing the xwl_screen we just allocated.
This is not a serious leak as failure at that point would lead to the
premature termination of Xwayland at startup, but covscan complains and
it's easy enough to fix.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The Linux version of xf86EnableIO calls a helper function called hwEnableIO().
Except on Alpha, this function reads /proc/ioports looking for the 'keyboard'
and 'timer' ports, extracts the port ranges, and enables access to them. It does
this by reading 4 bytes from the string for the start port number and 4 bytes
for the last port number, passing those to atoi(). However, it doesn't add a
fifth byte for a NUL terminator, so some implementations of atoi() read past the
end of this string, triggering an AddressSanitizer error:
==1383==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff71fd5b74 at pc 0x7fe1be0de3e0 bp 0x7fff71fd5ae0 sp 0x7fff71fd5288
READ of size 5 at 0x7fff71fd5b74 thread T0
#0 0x7fe1be0de3df in __interceptor_atoi /build/gcc/src/gcc/libsanitizer/asan/asan_interceptors.cpp:520
#1 0x564971adcc45 in hwEnableIO ../hw/xfree86/os-support/linux/lnx_video.c:138
#2 0x564971adce87 in xf86EnableIO ../hw/xfree86/os-support/linux/lnx_video.c:174
#3 0x5649719f6a30 in InitOutput ../hw/xfree86/common/xf86Init.c:439
#4 0x564971585924 in dix_main ../dix/main.c:190
#5 0x564971b6246e in main ../dix/stubmain.c:34
#6 0x7fe1bdab6b24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
#7 0x564971490e9d in _start (/home/aaron/git/x/xserver/build.asan/hw/xfree86/Xorg+0xb2e9d)
Address 0x7fff71fd5b74 is located in stack of thread T0 at offset 100 in frame
#0 0x564971adc96a in hwEnableIO ../hw/xfree86/os-support/linux/lnx_video.c:118
This frame has 3 object(s):
[32, 40) 'n' (line 120)
[64, 72) 'buf' (line 122)
[96, 100) 'target' (line 122) <== Memory access at offset 100 overflows this variable
HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork
(longjmp and C++ exceptions *are* supported)
SUMMARY: AddressSanitizer: stack-buffer-overflow /build/gcc/src/gcc/libsanitizer/asan/asan_interceptors.cpp:520 in __interceptor_atoi
Shadow bytes around the buggy address:
0x10006e3f2b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x10006e3f2b60: 00 00 f1 f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2[04]f3
0x10006e3f2b70: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
0x10006e3f2b90: f1 f1 f8 f2 00 f2 f2 f2 f8 f3 f3 f3 00 00 00 00
0x10006e3f2ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1
0x10006e3f2bb0: f1 f1 00 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==1383==ABORTING
Fix this by NUL-terminating the string.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1193#note_1053306
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
GAMMA_LUT sizes other than 1024 cause a crash during startup if the memcpy()
calls in xf86RandR12CrtcSetGamma() read past the end of the legacy X11 /
XVidMode gamma ramp.
This is a problem on Intel ICL / GEN11 platforms because they report a GAMMA_LUT
size of 262145. Since it's not clear that the modesetting driver will generate a
proper gamma ramp at that size even if xf86RandR12CrtcSetGamma() is fixed, just
disable use of GAMMA_LUT for sizes other than 1024 for now. This will cause the
modesetting driver to disable the CTM property and fall back to the legacy gamma
LUT.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1193
Tested-by: Mark Herbert
Whenever an unredirected fullscreen window uses pageflipping for a
DRI3/Present PresentPixmap() operation and the X-Screen has more than
one active output, multiple crtc's need to execute pageflips. Only
after the last flip has completed can the PresentPixmap operation
as a whole complete.
If a sync_flip is requested for the present, then the current
implementation will synchronize each pageflip to the vblank of
its associated crtc. This provides tear-free image presentation
across all outputs, but introduces a different artifact, if not
all outputs run at the same refresh rate with perfect synchrony:
The slowest output throttles the presentation rate, and present
completion is delayed to flip completion of the "latest" output
to complete. This means degraded performance, e.g., a dual-display
setup with a 144 Hz monitor and a 60 Hz monitor will always be
throttled to at most 60 fps. It also means non-constant present
rate if refresh cycles drift against each other, creating complex
"beat patterns", tremors, stutters and periodic slowdowns - quite
irritating!
Such a scenario will be especially annoying if one uses multiple
outputs in "mirror mode" aka "clone mode". One output will usually
be the "production output" with the highest quality and fastest
display attached, whereas a secondary mirror output just has a
cheaper display for monitoring attached. Users care about perfect
and perfectly timed tear-free presentation on the "production output",
but cares less about quality on the secondary "mirror output". They
are willing to trade quality on secondary outputs away in exchange
for better presentation timing on the "production output".
One example use case for such production + monitoring displays are
neuroscience / medical science applications where one high quality
display device is used to present visual animations to test subjects
or patients in a fMRI scanner room (production display), whereas
an operator monitors the same visual animations from a control room
on a lower quality display. Presentation timing needs to be perfect,
and animations high-speed and tear-free for the production display,
whereas quality and timing don't matter for the monitoring display.
This commit gives users the option to choose such a trade-off as
opt-in:
It adds a new boolean option "AsyncFlipSecondaries" to the device section
of xorg.conf. If this option is specified as true, then DRI3 pageflip
behaviour changes as follows:
1. The "reference crtc" for a windows PresentPixmap operation does a
vblank synced flip, or a DRM_MODE_PAGE_FLIP_ASYNC non-synchronized
flip, as requested by the caller, just as in the past. Typically
flips will be requested to be vblank synchronized for tear-free
presentation. The "reference crtc" is the one chosen by the caller
to drive presentation timing (as specified by PresentPixmap()'s
"target_msc", "divisor", "remainder" parameters and implemented by
vblank events) and to deliver Present completion timestamps (msc
and ust) extracted from its pageflip completion event.
2. All other crtc's, which also page-flip in a multi-display configuration,
will try to flip with DRM_MODE_PAGE_FLIP_ASYNC, ie. immediately and
not synchronized to vblank. This allows the PresentPixmap operation
to complete with little delay compared to a single-display present,
especially if the different crtc's run at different video refresh
rates or their refresh cycles are not perfectly synchronized, but
drift against each other. The downside is potential tearing artifacts
on all outputs apart from the one of the "reference crtc".
Successfully tested on a AMD gpu with single-display, dual-display and
triple-display setups, and with single-X-Screen as well as dual-X-Screen
"ZaphodHeads" configurations.
Please consider merging this commit for the upcoming server 1.21 branch.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
It turns out xdmx currently crashes when any client attempts to use GL
and it has been in such state for about 14 years. There was a patch to
fix the problem [1] 4 years ago, but it never got merged. The last
activity on any bugs referring to xdmx has been more than 4 years ago.
Given such situation, I find it unlikely that anyone is still using xdmx
and just having the code is a drain of resources.
[1]: https://lists.x.org/archives/xorg-devel/2017-June/053919.html
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
When using DRI3+Present with PRIME render offload, sometimes there is
a mismatch between the stride of the to-be-presented Pixmap and the
frontbuffer. The current code would reject a pageflip present in this
case if atomic modesetting is not enabled, ie. always, as atomic
modesetting is disabled by default due to brokeness in the current
modesetting-ddx.
Fullscreen presents without page flipping however trigger the copy
path as fallback, which causes not only unreliable presentation timing
and degraded performance, but also massive tearing artifacts due to
rendering to the framebuffer without any hardware sync to vblank.
Tearing is extra awful on modesetting-ddx because glamor afaics seems
to use drawing of a textured triangle strip for the copy implementation,
not a dedicated blitter engine. The rasterization pattern creates extra
awful tearing artifacts.
We can do better: According to a tip from Michel Daenzer (thanks!),
at least atomic modesetting capable kms drivers should be able to
reliably change scanout stride during a pageflip, even if atomic
modesetting is not actually enabled for the modesetting client.
This commit adds detection logic to find out if the underlying kms
driver is atomic_modeset_capable, and if so, it no longer rejects
page flip presents on mismatched stride between new Pixmap and
frontbuffer.
We (ab)use a call to drmSetClientCap(ms->fd, DRM_CLIENT_CAP_ATOMIC, 0);
for this purpose. The call itself has no practical effect, as it
requests disabling atomic mode, although atomic mode is disabled by
default. However, the return value of drmSetClientCap() tells us if the
underlying kms driver is atomic modesetting capable: An atomic driver
will return 0 for success. A legacy non-atomic driver will return a
non-zero error code, either -EINVAL for early atomic Linux versions
4.0 - 4.19 (or for non-atomic Linux 3.x and earlier), or -EOPNOTSUPP
for Linux 4.20 and later.
Testing on a MacBookPro 2017 with Intel Kabylake display server gpu +
AMD Polaris11 as prime renderoffload gpu, X-Server master + Mesa 21.0.3
show improvement from unbearable tearing to perfect, despite a stride
mismatch between display gpu and Pixmap of 11776 Bytes vs. 11520
Bytes. That this is correct behaviour was also confirmed by comparing the
behaviour and .check_flip implementation of the patched modesetting-ddx
against the current intel-ddx SNA Present implementation.
Please consider merging this patch before the server-1.21 branch point.
This patch could also be cherry-picked into the server 1.20 branch to
fix the same limitation.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
In some scenarios, the Wayland compositor might have more knowledge
than the X11 server and may be able to perform pointer emulation for
touch events better. Add a command-line switch to allow compositors
to turn Xwayland pointer emulation off.
Signed-off-by: Simon Ser <contact@emersion.fr>
A misplaced error check can cause this failure scenario, and does
so reliably as tested on Ubuntu 21.04 with KDE Plasma 5 desktop
within the first few seconds of login session startup, rendering
VRR under modesetting-ddx unusable:
1. Some X11 client application changes some window property.
2. ms_change_property() is called as part of the property change
handling call chain (client->requestVector[X_ChangeProperty]).
It removes itself temporarily from the call chain - or so it
thinks, hooking up saved_change_property instead.
3. ret = saved_change_property(client) is called and fails
temporarily for some non-critical reason.
4. The misplaced error check returns early (error abort), without
first restoring ms_change_property() as initial X_ChangeProperty
handler in the call chain again.
-> Now ms_change_property() has removed itself permanently from the
property handler call chain for the remainder of the X session
and VRR property changes on windows are no longer handled, ie.
VRR no longer gets enabled/disabled in response to window VRR
property changes.
Place the error check at the proper place, just as it is correctly
done by amdgpu-ddx, and in modesetting-ddx ms_delete_property()
function.
Verified to fix VRR handling with an AMD gpu under KDE desktop
session.
Please consider merging before branching the server 1.21 branch.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
The xf86CVTMode() was implemented in a standalone source file because it
was being used for both the xfree86 API and the standalone cvt utility.
Now that the cvt utility is removed (as part of libxcvt) we can move the
small xf86CVTMode() function with the rest of the xf86Modes sources.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The cvt utility is now replaced by the standalone version found in
libxcvt, no need to build the one in xfree86 anymore.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Replace the local implementation of the VESA CVT standard timing
modelines generator with the one from libxct to avoid code duplication.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Xwayland is using a copy of the CVT generator found in Xorg.
Rather than duplicating the code within the xserver tree, use the
libxcvt implementation instead.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
If there is an explicit configuration, assign the RandR provider
of the GPUDevice to the screen it was specified for.
If there is no configuration (default case) the screen number is
still 0 so it doesn't change behaviour.
The result is e.g:
# DISPLAY=:0.2 xrandr --listproviders
Providers: number : 2
Provider 0: id: 0xd2 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting
Provider 1: id: 0xfd cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 2 outputs: 2 associated providers: 0 name:Intel
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
We are handling two cases here: the active flip or the pending flip.
For the pending flip (event->pending == TRUE), we called
xwl_present_release_pixmap.
For the active flip (event->pending == FALSE), we called
xwl_present_release_event. However, xwl_present_flip_notify_vblank
already unhooked event->vblank.event_queue. So this was effectively the
same as calling xwl_present_release_pixmap.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Use present_vblank_rec::event_queue instead.
The changes in xwl_present_execute shouldn't really be needed, since
we should never hit queue_vblank in present_execute_wait. But let's be
safe rather than sorry, plus this simplifies the code.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Can just call xwl_present_execute directly.
This allows dropping the window member from struct xwl_present_window as
well.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
We clear the vblank->pixmap field, so next time xwl_present_execute
falls through to present_execute_post.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This allows for various simplifications.
Use the pointer to the struct memory as the event ID. In contrast to
the SCMD code for Xorg (where pending DRM events cannot be cancelled),
this is safe here, because we can destroy pending Wayland callbacks. So
we can't get a callback with a stale pointer to freed memory.
Remove xwl_present_window::release_list in favour of
present_vblank_rec::window_list.
Remove xwl_present_event::xwl_present_window in favour of
present_vblank_rec::window.
xwl_present_free_event is never called for a NULL pointer anymore, no
need to check.
v2:
* Restore DestroyWindow wrapping order to make sure
present_destroy_window doesn't call xwl_present_abort_vblank.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
We can call xwl_present_free_event unconditionally from
xwl_present_abort_vblank, since the sync_callback is already destroyed
in xwl_present_cleanup.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Mainly into xwl_present_check_flip, and call that from
present_wnmd_check_flip_window.
No need for them to be separate anymore.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This will allow eliminating indirections and making the Xwayland Present
code more efficient and easier to follow.
While this technically changes the Xorg video driver ABI, I don't know
of any drivers using the dropped present_wnmd_* symbols, and I doubt a
Xorg driver could make use of them as is anyway.
(As a bonus, Xorg no longer links any Xwayland specific Present code)
v2:
* Wrap DestroyWindow before initializing Present, so that
present_destroy_window runs before xwl_present_cleanup. Avoids crash
due to present_destroy_window calling xwl_present_* functions when
xwl_present_window was already freed. (Olivier Fourdan)
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Not sure why we'd need to abandon a pending stream for a pixmap just
because it's no longer a window pixmap. Let's try not to.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This makes sure RandR events are sent to interested clients as needed.
This was happening implicitly in some cases, but not in others, e.g. if
the root window size didn't change.
If this were to call RRTellChanged more often than necessary in some
cases, that should be harmless, as it only sends events if something
has actually changed since last time.
Should fix https://bugzilla.redhat.com/show_bug.cgi?id=1979892 .
v2:
* Call RRTellChanged at the very end of update_screen_size, just in
case.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
To avoid an EGL stream in the wrong state, if the window pixmap changed
before the stream was connected, we would still keep the pending stream
but mark it as invalid. Once the callback is received, the pending would
be simply discarded.
But all of this is actually to avoid a bug in egl-wayland, there should
not be any problem with Xwayland destroying an EGL stream while the
compositor is still using it.
With that bug now fixed in egl-wayland 1.1.7, we can safely drop all
that logic from Xwayland EGLstream backend.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1189
If the pixmap does not actually change in set_window_pixmap(), there is
no need to invalidate the pending stream, if there's one.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When building xserver with slibtool (https://dev.midipix.org/cross/slibtool)
the build will fail.
/usr/bin/ld: cannot find -ldmxconfig
This is because xserver creates libdmxconfig.a internally and then links with
the linker flag -ldmxconfig. However according to automake documentation the
-lfoo linker flags should only be used for external dependencies and all
internal libraries should be linked with the libtool archive file (.la) or
the static archive (.a) when the former is not available.
GNU libtool is far more permissive and happens to silently obscure this issue
while slibtool fails because it instead sees '-L./.libs -ldmxconfig'.
xf86_platform_devices[i].pdev may be NULL in cases we fail to parse the
busid in config_udev_odev_setup_attribs() (see also [1], [2]) such as
when udev does not give use ID_PATH. This in turn leads to
platform_find_pci_info() being not called and pdev being NULL.
[1]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/993
[2]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1076
Reviewed-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
This is the only place where we don't check whether
primaryBus.id.plat->pdev is not NULL before accessing its members.
It may be NULL in cases we fail to parse the busid in
config_udev_odev_setup_attribs() (see also [1], [2]) such as when udev
does not give use ID_PATH. This in turn leads to
platform_find_pci_info() being not called and pdev being NULL in one of
the items within the xf86_platform_devices array. For this to cause a
crash we only need it to become the primaryBus device.
[1]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/993
[2]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1076
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
screenp->displays[count] (passed to configDisplay() in
configScreen()) is NULL if there is no Virtual setting
in the configuration.
Fixes: f8a6be04d0 ("xfree86: Change
displays array to pointers array to fix invalid pointer issues
after table reallocation")
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Physical dimmension of display can be obtained not just by configuration or
DDC, but also directly from kernel via drmModeGetConnector(). Until now
xserver silently discarded these values even when no configuration nor EDID
were present and fallbacked to default DPI.
There are rare cases when xf86SetDepthBpp is resizing displays array in confScreen.
As that array is shared between set of ScrnInfoRec's then realloc might invalidate chached DispPtr display values in
otheres ScrnInfoRec objects.
If we will change displays array as an array of pointers to DispRec then cached DispRec pointers in ScrnInfoRec
won't be invalid after reallocation of displays array.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
In certain circumstances we will have a lot of flip errors without a
reasonable way to prevent them. In such case we reduce the number of
logged messages to at least not fill the error logs.
The details are as follows:
At least on i915 hardware support for async page flip support depends on
the used modifiers which themselves can change dynamically for a screen.
This results in the following problems:
- We can't know about whether a particular CRTC will be able to do an
async flip without hardcoding the same logic as the kernel as there's no
interface to query this information.
- There is no way to give this information to an application, because
the protocol of the present extension does not specify anything about
changing of the capabilities on runtime or the need to re-query them.
Even if the above was solved, the only benefit would be avoiding a
roundtrip to the kernel and reduced amount of error logs. The former
does not seem to be a good enough benefit compared to the amount of work
that would need to be done. The latter is solved in this commit.
Reviewed-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
In xwl_glamor_eglstream_get_wl_buffer_for_pixmap. This can likely be hit
now with an SHM pixmap via the Present flip path. There might be other
corner cases.
Fixes: f3eb1684fa "xwayland: enable MIT-SHM shared pixmaps"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This mode for displays running on evdi/udl as side effect of failed glamor_egl_init
reverse_prime_offload_mode was initialized to FALSE
After Mesa upgrade to 21.0.0 GL_RENDERER is not llvmpipe that results in successful glamor_egl_init
and reverse_prime_offload_mode enabled.
This commit is explicitly disabling reverse_prime_offload_mode for evdi and udl drivers
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
When the command line option "-terminate" is used, it could be
interesting to give it an optional grace period to let the Xserver
running for a little longer in case a new connection occurs.
This adds an optional parameter to the "-terminate" command line option
for this purpose.
v2: Use a delay in seconds instead of milliseconds
(Martin Peres <martin.peres@mupuf.org>)
v3: Clarify man page entry, ensure terminateDelay is always >= 0,
simplify TimerFree(). (Peter Hutterer <peter.hutterer@who-t.net>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
That will dramatically affect performance, might as well log when we
cannot use GL_OES_EGL_image with the NVIDIA closed-source driver.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If the EGLStream backend is able to use hardware acceleration with the
NVIDIA closed source driver, we should use the "nvidia" GLX
implementation instead of the one from Mesa to take advantage of the
NVIDIA hardware accelerated rendering.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If Xwayland's EGLstream backend supports hardware acceleration with the
NVIDIA closed-source driver, the GLX library also needs to be one
shipped by NVIDIA, that's what GLVND is for.
Add a new member to the xwl_screen that the backend can optionally set
to the preferred GLVND vendor to use.
If not set, "mesa" is assumed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When eglSwapBuffers inserts a new frame into a window's stream, there may be a
delay before the state of the consumer end of the stream is updated to reflect
this. If the subsequent wl_surface_attach, wl_surface_damage, wl_surface_commit
calls are received by the compositor before then, it will (typically) re-use
the previous frame acquired from the stream instead of the latest one.
This can leave the window displaying out-of-date contents, which might never be
updated thereafter.
To fix this, after calling eglSwapBuffers, xwl_glamor_eglstream_post_damage
should call eglStreamFlushNV. This call will block until it can be guaranteed
that the state of the consumer end of the stream has been updated to reflect
that a new frame is available.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1171
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Allow X11 clients to create shared pixmaps via the MIT-SHM
extension under Xwayland. Tested with a wlroots patch [1].
Also add a few assertions to make sure we have wl_buffers where we
need them.
[1]: https://github.com/swaywm/wlroots/pull/2875
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
As of commit 098e0f52 xwl_glamor_eglstream_allow_commits will not allow commits
if the xwl_pixmap does not have an EGLSurface. This is valid for pixmaps backed
by an EGLStream, however pixmaps backed by a dma-buf for OpenGL or Vulkan
rendering will never have an EGLSurface. Unlike EGLStream backed pixmaps,
though, glamor will render directly to the buffer that Xwayland passes to the
compositor. Hence, they don't require the intermediate copy in
xwl_glamor_eglstream_post_damage that EGLStream backed pixmaps do, so there is
no need for an EGLSurface.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The EGLstream backend's post damage function uses a shader and
glDrawArrays() to copy the data from the glamor's pixmap texture prior
to do the eglSwapBuffers().
However, glDrawArrays() can be affected by the GL state, and therefore
not reliably produce the expected copy, causing the content of the
buffer to be corrupted.
Make sure to set the ALU to GXCopy prior to call glDrawArrays() to get
the expected result.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, the EGLstream backend would increment the pixmap refcount for
each commit, and decrease that refcount on the wl_buffer release
callback.
But that's relying on the compositor sending us a release callback for
each commit, otherwise the pixmap refcount will keep increasing and the
pixmap will be leaked.
So instead, increment the refcount on the pixmap only when we have not
received a release notification for the wl_buffer, to avoid increasing
the pixmap refcount more than once without a corresponding release
event.
This way, if the pixmap is still in use when released on the X11 side,
the EGL stream will be kept until the compositor releases it.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
EGLstream's post_damage() would unconditionally return success
regardless of the actual status of the eglSwapBuffers().
Yet, if eglSwapBuffers() fails, we should not post the corresponding
damage as they wouldn't match the actual content of the buffer.
Use the eglSwapBuffers() return value as the return value for
post_damage() and do not take a refrence on the pixmap if it fails.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Use calloc() instead of malloc() like the rest of the code.
Also fix the arguments of calloc() calls to match the definition which
is calloc(size_t nmemb, size_t size).
This is a cleanup patch, no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The EGL surface for the xwl_pixmap is created once the stream is ready
and valid.
If the pixmap's EGL surface fails, for whatever reason, the xwl_pixmap
will be unusable and will end up as an invalid wl_buffer.
Make sure we do not allow commits in that case and recreate the
xwl_pixmap/stream.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Now that the pending stream is associated with the xwl_pixmap for
EGLStream and the xwl_pixmap itself is associated to the pixmap, we have
a reliable way to get to those data from any pending stream.
As a result, the list of pending streams that we keep in the EGLStream
global structure becomes useless.
So we can drop the pending stream's xwl_pixmap and also the list of
pending streams altogether, and save us a walk though that list for each
callback.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit affc47452 - "xwayland: Drop the separate refcount for the
xwl_pixmap" removed the separate reference counter for the xwl_pixmap
which holds the EGLStream.
While that works fine for the common case, if the window's pixmap is
changed before the stream is ready, the older pixmap will be destroyed
and the xwl_pixmap along with it, even if the compositor is still using
the stream.
The code that was removed with commit affc47452 was taking care of that
by increasing the separate reference counter for the xwl_pixmap, but it
no longer the case.
As a result, we may end up with the EGL stream in the wrong state when
trying to use it, which will cascade down into all sort of issues.
To avoid the problem, increase the reference count on the pixmap when it
is marked as invalid in EGLStream's SetWindowPixmap().
This way, the xwl_pixmap and the EGLStream are kept until released by
the compositor, even when the pixmap changes before stream is ready.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: affc47452 xwayland: Drop the separate refcount for the xwl_pixmap
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Previously, we would have pending streams associated with top level X11
windows, keeping temporary accounting for the pending streams before
they get fully initialized for the xwl_pixmap which would be associated
with X11 pixmaps.
If the window content changes before the stream is ready, the
corresponding pending stream would be marked as invalid and the pending
stream would be eventually removed once the stream becomes ready.
Since commit affc47452 - "xwayland: Drop the separate refcount for the
xwl_pixmap", we no longer keep a separate reference counter for the
xwl_pixmap, but rather tie it to the X11 pixmap lifespan. Yet, the
pending stream would still be associated with the X11 toplevel window.
Dissociate the pending streams from the X11 toplevel window, to keep it
tied only to the xwl_pixmap so that we can have:
- pixmap <-> xwl_pixmap
- xwl_pixmap <-> pending stream
Of course, the pending streams remain temporary and get removed as soon
as the ready callback is triggered, but the pending streams are not
linked to the X11 window anymore which can change their content, and
therefore their X11 pixmap at any time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
eglCreateStreamKHR() can fail and return EGL_NO_STREAM_KHR, in which
case there is no point in trying to create a buffer from it.
Similarly, eglCreateStreamProducerSurfaceKHR() also fail and return
EGL_NO_SURFACE, which in turn will be used in eglMakeCurrent() as
draw/read surface, and therefore would mean no draw/read buffer.
In those cases, log the error, and bail out early. That won't solve the
issue but will help with investigating the root cause of issues with
EGLStream backend.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Some functions are called "callback" whereas they are not longer
callback functions or "unref" while they no longer deal with a reference
counter anymore, which is quite confusing. Rename those functions to be
more explicit.
Also, the pending streams can be destroyed in different places, move the
common code to separate function to avoid duplicating code and help with
readability of the code.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
The EGLStream backend would sometime generate GL errors trying to draw
to the framebuffer, which gives an invalid buffer, which in turn would
generate a Wayland error from the compositor which is fatal to the
client.
Check the framebuffer status and bail out early if it's not complete,
to avoid getting into trouble later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If the glamor backend failed to post damage, the caller should do the
same to avoid a failure to attach the buffer to the Wayland surface.
Change the API of Xwayland's glamor backend post_damage() to return a
status so that xwl_window_post_damage() can tell whether the callee
failed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If the buffer is NULL, do not even try to attach it, and risk a Wayland
protocol error which would be fatal to us.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
EGLStream wl_eglstream_display_create_stream() may fail, yet Xwayland
would try to attach the buffer which may cause a fatal Wayland protocol
error raised by the compositor.
Check if the buffer creation worked, and fail gracefully otherwise (like
wayland-eglsurface does).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If a window is being used for direct rendering with OpenGL or Vulkan, and is
using the flipping path for presentation, it's pixmap will be set to a dma-buf
backed pixmap created by the client-side GL driver. However, this means that
xwl_glamor_eglstream_post_damage won't work since it requires that the pixmap
has an EGLSurface that it can render to, which dma-buf backed pixmaps do not.
In this case, though, xwl_glamor_eglstream_post_damage is not necessary since
glamor will have rendered directly to the pixmap, so we can simply pass it
directly to the compositor. There's no need for the intermediate copy we
normally do in that function.
Therefore, this change adds an early-return case to post_damage for dma-buf
backed pixmaps, and removes the corresponding asserts from that function and
allow_commits.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Copied TGL PCI ID from MESA iris_pci_ids.h
This update brings in a significant number of new platform ID's
Sync up until commit f02ae698
Signed-off-by: Mazlan, Hazwan Arif <hazwan.arif.mazlan@intel.com>
On FreeBSD 13.0-CURRENT for PowerPC64 big-endian (BE), X was
crashing in some cases. For instance, when twm was started
and the background was clicked to open its menu, X crashed
with a segmentation fault, trying to dereference a null pointer
at CreatePicture().
There were 2 issues with xorg-server handling of RGB masks that
caused the pointer above to be null and thus the crash:
- wrong use of ffs() to get the RGB offsets from the masks
- overflow when shifting a 16-bit integer
This change fixes both issues. They happen when the system is BE
but has a video adapter using a little-endian (LE) ARGB32
framebuffer. In order to display the correct colors, this setup
requires a BE RGBA32 color format to be used by X, by setting
the RGB masks appropriately, that didn't work properly because of
the issues above.
A lot of that code is the same as in xf86-amdgpu and xf86-nouveau drivers. By removing that functions from
ms namespace we can move that code to common implementation.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Instead of getting the current msc value from the window crtc,
which not exist take the last saved msc value saved in
the window_priv struct
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Provides an implementation for the pixmap_from_buffers DRI3 function for
xwayland's eglstream backend. This will be used by the NVIDIA GLX driver
to pass buffers from client applications to the server. These can then
be presented using the PRESENT extension.
To hopefully make this less error-prone, we also introduce a "type"
field for this struct to distinguish between xwl_pixmaps for the new
DRI3-created pixmaps and those for the existing glamor-created pixmaps.
Additionally, the patch enables wnmd present mode with the eglstream backend.
This involves creating a wl_buffer for the provided dma-buf before importing it
into EGL and passing this to the compositor so it can be scanned out directly
if possible.
Since both backends now support this present mode, the HAS_PRESENT_FLIP flag is
no longer needed, so it can be removed.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
This exposes a new glamor backend function, check_flip, which can be
used to control whether flipping is supported for the given pixmap.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
This moves the modifiers and formats functions previously only available
to the GBM backend to the common glamor code so that it can be used by
both the GBM and EGLStream backends.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
The EGLStream backend can possibly also use the dmabuf interface, so
move the relevant code from the GBM specific source to the common bits.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
According to the "VESA Enhanced EDID Standard", all GTF compliant
displays are continuous frequency.
The GTF support flags in 'Display Range Limits Descriptor' cannot be
used if the display is a non-continuous frequency multi-mode display.
Closes#1105
Signed-off-by: Pascal VITOUX <vitoux.pascal@gmail.com>
Fixes: 6a79a737 ("xfree86: add drm modes on non-GTF panels")
Reviewed-by: Aaron Ma aaron.ma@canonical.com
Rather than trying to create a gamma ramp array of the appropriate size in
drmmode_crtc_init when the GAMMA_LUT property should be used, just flag the crtc
as wanting to use the GAMMA_LUT property and then replace the gamma ramp later,
right before calling xf86HandleColormaps. This avoids a problem during initial
startup where xf86RandR12CreateObjects12 hard-codes a gamma ramp size of 256,
causing xf86RandR12CrtcSetGamma to read past the end of the DIX layer's RandR
gamma ramp array:
PreInit
drmmode_pre_init
drmmode_crtc_init
crtc->gamma_size = 1024
ScreenInit
xf86CrtcScreenInit
xf86RandR12Init
xf86RandR12Init12
xf86RandR12CreateObjects12
RRCrtcCreate
randr_crtc->gammaSize = 0
xf86RandR12InitGamma(pScrn, 256)
RRCrtcGammaSetSize
randr_crtc->gammaSize = 256
xf86RandR12InitGamma
xf86RandR12CrtcInitGamma
RRCrtcGammaSet
xf86RandR12CrtcSetGamma
// crtc->gamma_size is 1024 here, while randr_crtc->gammaRed
// is a 256-element array.
memcpy(crtc->gamma_red, randr_crtc->gammaRed, crtc->gamma_size * sizeof(crtc->gamma_red[0]));
drmmode_setup_colormap
xf86HandleColormaps
xf86RandR12InitGamma
RRCrtcGammaSetSize
randr_crtc->gammaSize = 1024
Fixes: 245b9db0 - modesetting: Use GAMMA_LUT when available
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1126
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
This brings the behavior closer than what we currently have with
autotools-based build system.
Meson does not currently have native support for symlinks.
See https://github.com/mesonbuild/meson/issues/1602.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Meson gets confused when there are two targets of the same name within
the same directory, so we use a different intermediate name.
This is a problem with the Xorg SUID wrapper which has the same filename
as the real Xorg executable and is configured in the same meson.build
file. This commit works around this by using a different filename in
build stage and renaming only when installing.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
This bumps the minimum Wayland version to 1.5 (released in 2014).
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Olivier Fourdan
Sultan Alsawaf
Jeremy Huddleston Sequoia
John D Pell
Doğukan Korkmaztürk
Corentin Noël
Shashank Sharma
pkubaj
Lucas Stach
Demi Marie Obenour
Jan Beich
Alan Coopersmith
coypu@sdf.org
Michel Dänzer
Peter Hutterer
David Jacewicz
zhoulei
Adam Jackson
Morose
Joshua Ashton
Weng Xuetian
Konstantin Kharlamov
Brian Ruthven
Claes Nästén
Povilas Kanapickas
nerdopolis
Thomas Zimmermann
Jocelyn Falempe
Andrea Monaco
Sam James
Matthieu Herrb
Drew DeVault
Xaver Hugl
Dave Airlie
Jon Turney
Matthieu Herrb
Simon Ser
nerdopolis
Mario Kleiner
James Jones
Patrik Jakobsson
Aaron Plattner
Zoltán Böszörményi
Łukasz Spintzyk
orbea
Zoltán Böszörményi
Daniel Strnad
Lukasz Spintzyk
Erik Kurzinger
Mazlan, Hazwan Arif
luporl
Edouard Gaulué
Pascal VITOUX