A better approach which ensures we have a L modifier key down if we are told neither are down and atleast one is down... =/
(cherry picked from commit bc13dda345f716bf4de9bfe4e1d85969263b60c2)
It was incorrectly blamed for some crashes a few months ago, and it should be
safe to use until we get an EXA driver to replace it.
(cherry picked from commit 8121f30bd29591fc74fbc680fbbf20210271fa58)
Since it is already parsing cpp output, create a dependency file
in the same process. This will cause sdksyms.c to be regenerated
whenever a sdk header is modified.
This also uses the gmake 'sinclude' directive (don't fail if
included file doesn't exist). This should not cause any problems
given that gmake only constructs are used in several other Makefiles.
This old behavior was used as a workaround for the menubar behavior in the older server,
but we handle it better now and need to update our screens when we toggle the rootless
state instead.
(cherry picked from commit 508aa95bc2cd3fdc3dff448ec090919bf807d153)
- Example: mode 1280x1024, panned area 1281x1024
panned_area.x2 = 1281
mode.width = 1280
If you substract 1280 from 1281, then that leaves you with one.
Which is the one pixel that you need to move to actually see the last pixel collumn.
Substracting 1 from this will consistently prevent you from seeing the right and bottom edge.
- Pass $(CPP) & $(AWK) settings from configure to sdksyms.sh
- Only reset sdk variable (tracks if header is part of sdk) if
a filename is included on the cpp # <line-no> <filename> line,
since Sun compilers omit filename when it is unchanged from
previous line.
Restoring it unconditionally means we restore to whatever tty_mode has as
default value (i.e. 0). K_RAW happens to be 0x00, so we always restore to raw
mode if allowEmptyInput is off.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Ubuntu uses mawk by default, but it doesn't understand posix character
classes (which are locale dependent, and this patch uses only valid C
identifiers).
Also make sure awk runs with LC_ALL=C to match the regex patterns.
fd.o bugzilla #11128
Fix crashes when using the '-refresh rate-in-Hz' option in -fullscreen mode and using a DirectDraw engine.
On failure (typically 0x80004001 DDERR_UNSUPPORTED), use the default refresh rate for the driver, instead of the
entered value.
Also fix some nearby error reporting
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The function winMultiWindowGetTransientFor() crashes, due to a bogus pointer
dereference, but this fact was previously hidden by the function not being called!
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
- Add active field to crtc.
- Set gamma (only) whenever a crtc becomes active.
- Check for xf86_config being NULL.
- Increase crtc abi to 3.
- A few other fixes.
fd.o bugzilla #4491
Transparent icon backgrounds appear with black stripes as mask data is incorrectly aligned.
Modified the icon DDB bitmap data alignment to 16 bits
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
- The Gamma values from the monitor section are now used during initial config.
- The old colormap system is disabled when gamma set hook is available.
- Gamma values are now persistent for the lifetime of the xserver.
- This requires no driver changes and should be driver ABI compatible.
Fix the native HWND atom identifier to be initialized correctly, when built without external WM support
This is neccessary for native window naming to work correctly in multiwindow internal WM mode.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Bring Cygwin/X up to date with the change to damage-based shadow framebuffer.
Register the screen bitmap as the shadow framebuffer after screen resources
are created.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
When we are looking up the screen for an event, we need to take
into account the fact that the event may have been delivered to the
"peer window" that we create when implementing GLX. Since we only
ever create one such window per screen, just add a single peer_win
field to EphyrHostScreen.
The Cygwin/X build has been broken for a long time, probably since modular X
This patch fixes up configure/makefile and some general build issues (#18568)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
When a driver uses a crtc during device detection, the scrn has not yet been
configured and virtualX/virtualY are still zero. This caused the X server
to try and allocate a shadow frame buffer, which couldn't work.
Detect this by checking for zero virtualX/virtualY values.
Signed-off-by: Keith Packard <keithp@keithp.com>
pScreen->width/height are not initialized when doing initial mode setting,
which makes this function incorrectly fail. Using scrn->virtualX should work
in all cases though.
Bug 19017 reports a crash in xf86CrtcSetModeTransform when doing a modeset
for output probing, long before the screen array is initialized; that was
caused by a work-around to set pScreen->width/height so that xf86CrtcFitsScreen
could find the right values.
Signed-off-by: Keith Packard <keithp@keithp.com>
The shadow frame buffer and other data used for rotation need to be freed
when the crtc is disabled, not just when rotation is disabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the basename of header file processed by cpp matches $top_srcdir,
check for extern symbols in the output, and add to the xorg_symbols
vector.
Possibly a better solution then using this script would be to somehow
tell the linker to not drop any symbols from the binary being generated.
Thanks to David Miller for noticing a make problem with sdksyms.c
not being regenerated when sdksyms.sh is updated. This is not yet the
best solution; automake generates dependency for sdksyms.o, but the
build really should also regenerate sdksyms.c when sdksyms.o needs to
be regenerated.
Export the symbols in miext/cw/cw.h. These symbols are in libxaa, and
at least the nvidia driver uses them. Maybe cw.h should be installed
in the sdk.
The awk script was incorrectly referencing the struct name, and
not the struct variable.
Also added some comments to sdksyms.sh, for the reason it generates
the "symbol table" and add a message to the generated file, telling
is was automatically generated.
Traditional posix awk doesn't know about \W and whilst we check that
awk exists in configure.ac we don't check which awk we are using.
This corrects symbol generation for posix only awk.
The kbd driver may send events during device initialisation, and these events
need the EQ set up already.
X.Org Bug 18890 <http://bugs.freedesktop.org/show_bug.cgi?id=18890>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As suggested by Julien Cristau
This is an follow-up to
commit 9c5dd7337f
Author: Peter Hutterer <peter.hutterer@redhat.com>
Date: Wed Dec 3 14:24:25 2008 +1000
Let the DDX decide on the XkbRulesDefaults.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Acked-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
drv and idev are only set for SDs, but are only dereferenced for SDs too, so
initializing them to NULL is safe.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
These are private symbols, but used by the X Server.
The newly exported symbols were not added to the sdk headers.
Optionally, libxf86config could be compiled without hidden symbols
when being installed.
Thanks to Maarten Maathuis for noticing the problem.
It is declared as
<hash>ifdef HAVE_ACPI
Bool xf86acpiDisableFlag = FALSE;
<hash>endif
in hw/xfree86/common/xf86Globals.c
but not protected by the ifdef in the sdk header xf86Priv.h, what
caused a build failure in the tinderbox, due to the address of the
symbol being taken (to ensure it is available) in sdksyms.c.
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
If not taking the symbol addresses, linkage will break badly, as not
all symbols will be present, and it also requires changing library order,
and/or making some changes like the "libosandcommon".
This table should be modified to be generated automatically, as
it is required to "fool" the compiler/loader into adding all required
symbols to the X Server.
Those tables were once used to decide what symbols are visible to
modules, but they were outdated. The only real usage was that, since
it was taking the address of symbols, linkage should fail if the
symbols were not available.
Now the proper way to make symbols available to modules should
be to use the _X_EXPORT macro, or not compile with hidden symbols,
so that all symbols would be available.
All symbols in the tables were revised to ensure they are exported,
and only symbols that were not exported are ClientSleepUntil() and
DuplicateModule(), that were not in the sdk for quite some time
already, and should not have any users outside of the X Server
(and/or builtin modules).
The attribute should be set on header files to make it easier to
manage what symbols are available to modules.
_X_EXPORT should be used in sources only for special cases, like
symbols that must be visible by non video/input driver/modules but
should not be "advertised" in the sdk.
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Also, no need to call ShowCursor when SetCursorPosition already does it
Based on a previous patch by Maarten Maathuis
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
When leaving 3D games such as quake3 or sauerbraten, a cursor may stay on the
screen. This is caused by one run of SW rendering for the SD, even though the
SD was attached to the VCP and thus has HW rendering capabilities.
Check for the SD's attachment (like in all other functions) before deciding on
SW or HW rendering.
X.Org Bug 16805 <http://bugs.freedesktop.org/show_bug.cgi?id=16805>
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Just ignore devices after MAXDEVICES has been reached, but warn the user that
the devices are ignored.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This is done to actually change DIX_CFLAGS, as not all "modules" use
XORG_CFLAGS.
Also export the symbols that are required by other modules after
the change.
- Remove remaining references to XFree86-Misc options AllowNonLocalModInDev
and DisableModInDev.
- Remove remaining references to grab-breaking keys & associated options.
- Update description of Ctrl-Alt-Backspace to new -retro/DontZap defaults.
- Add description of new options -modalias and -showopts.
- Update list of modules loaded by default.
- Update input driver references from keyboard to evdev & kbd.
- Update list of driver man pages to match xf86-*-* drivers with man pages.
- Add See Also section to exa man page.
and various formatting/typo/etc. fixes.
The Xorg/xorg.conf sections on input device selection could use further
updates to better match the current state of HAL-enabled configuration.
The warnings corrected were only the ones that should correct
real problems. The most common one is 64 bit integers as
"printf %l" arguments.
Note that there is a patch related to this at:
http://bugs.freedesktop.org/show_bug.cgi?id=18204
These symbols were removed from the X Server, or never declared.
One symbol that may need special attention is XkbBuildCoreState(),
that doesn't have a prototype anywhere, but is called from
xkb/xkbEvents.c:XkbFilterEvents(), and also used by the macros
XkbStateFieldFromRec() and XkbGrabStateFromRec() defined in
include/xkbstr.h.
fb/wfbrename.h also may need some cleanup, as it makes several
"renames" of non existing symbols.
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
Add various GLX extensions to the list of supported extensions.
Reformat the oddly formatted code in some areas.
Use xalloc and xfree instead of malloc and free.
(cherry picked from commit 755f53eb40c4329d8c82a31cb910c31fdd4ea12e)
This patch exports all symbols required by the compilable
(in a x86 linux computer) xorg/driver/* modules.
Still missing symbols worth mentioning are:
sunleo
miFindMaxBand no longer available
intel (uxa/uxa-accel.c)
fbShmPutImage no longer available (and should have been static)
mga
MGAGetClientPointer (should come from matrox's libhal)
This is not a definitive "visibility" patch, as all it does is to
export missing symbols, but the modules that current don't compile,
may require more symbols once fixed, and third party drivers should
also require more symbols exported.
A "definitive" patch should export symbols defined in the sdk.
../../../../hw/xfree86/xaa/xaaTables.c:9:14: warning: symbol 'byte_expand3' was not declared. Should it be static?
../../../../hw/xfree86/xaa/xaaTables.c:53:14: warning: symbol 'byte_reversed_expand3' was not declared. Should it be static?
The patch removes all macros in the format
define xf86_sym ((type (*)(argument-list))LoaderSymbol("sym"))
creates a new macro in the format
define xf86_sym sym
and ensures "sym" is a "visible" symbol.
The patch doesn't add or remove features, and is source and binary
compatible with previous shared objects (with the difference that it
requires the dlloader).
These symbols are a special case, as, due to the fact that LoaderSymbol
was being used to reference them, they are not easily found by "automated"
tools that check for missing symbols. And now it also have the benefit
that the compiler/loader "knows what is going on".
pixman 0.13.2 now holds all of the matrix operations. This leaves
the protocol conversion routines and some ABI stubs in place
Signed-off-by: Keith Packard <keithp@keithp.com>
<http://bugs.opensolaris.org/view_bug.do?bug_id=6685465>
This is a refix of the previous fix for CR 6685465. In the first fix
I was shifting the colors to match the mask by the bits_per_rgb amount
in the visual structure. That field has nothing to do with the # of
bits to shift by. I should just instead shift the bits to match the mask.
Includes fixes for:
"xf86Config.c", line 2434: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 312: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "../../../hw/xfree86/common/xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 438: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
"xf86Modes.c", line 701: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
helper_exec.c: In function ‘port_rep_inb’:
helper_exec.c:219: warning: implicit declaration of function
‘DEBUG_IO_TRACE’
helper_exec.c:219: warning: nested extern declaration of
‘DEBUG_IO_TRACE’
Doing projective transforms required repositioning the cursor using the
hotspot, but that requires relocating the upper left corner in terms of said
hotspot.
Instead of using a separate function to notify DIX about transform changes,
add the transform to RRCrtcNotify so that the whole Crtc state changes
atomically.
RandR matrix computations lose too much precision in fixed point;
computations using the inverted matrix can be as much as 10 pixels off.
Convert them to double precision values and pass those around. These API
changes are fairly heavyweight; the official Render interface remains fixed
point, so the fixed point matrix comes along for the ride everywhere.
Add APIs to xf86RandR12 support and randr extension to record whether the
driver supports transforms, report that value in the RRGetCrtcTransform
reply.
New RRCrtcGetTransform function in DIX that DDX can use to get the pending
transform. The DDX code should be complete; the DIX code is just a stub at
this point.
Drivers that care about crtc positions on the screen to ensure that vblank
works correctly need to be notified when crtcs are changed.
Provide a hook in the mode setting code that is invoked whenever any
configuration is done to the screen.
Use this new hook in the DRI code so that DRI clients are notified and
receive updated information.
Signed-off-by: Keith Packard <keithp@keithp.com>
The xfree86 server previously hat NewInputDeviceRequest and InitInput, and
both basically did the same thing. Reduce NIDR to parameter checking and use
xf86NewInputDevice from both InitInput and NIDR to actually create the device.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Add some commentary about future directions needed for the GLX drawable
creation and destruction code.
Match xalloc with xfree.
I made some minor formatting improvements.
(cherry picked from commit b772d64fce31d16b498c621096e39d5203994d6e)
In attach() check for pDraw being NULL, and also print an ErrorF message,
because we eventually want to track down why this is occuring.
It's unclear how this occurs, but as I noted in the 1.4 branch, I believe that
the DrawablePtr/struct _Drawable -> id is the member being accessed that causes
KERN_PROTECTION_FAILURE at 0x0000000000000004
This passes my tests using: env LIBGL_ALWAYS_INDIRECT=1 ./sometest.
I fixed a warning: caused by initializing the screen->base.visuals with the
configs. It is a ** not a *. It seems that some other part of GLX will
initialize this for us.
(cherry picked from commit 17f6a261fca6d5856069dce28bb4838261afc6bc)
When the linux kernel sets the NX bit vm86 segfaults when it tries to execute
code in memory that is not marked EXEC. Such code gets called whenever
we return from a VBIOS call to signal the calling program that the call
is actually finished and that we are not trapping for other reasons (like
IO accesses).
Use mprotect(2) to set these memory ranges PROT_EXEC.
There's little chance that we'll get the input devices at runtime without HAL,
we might as well force the server to add mouse/kbd devices automatically -
just like in the olden days.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
These values need not be constrained to integer values.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Added a configure option called --enable-standalone-xpbproxy which is useful for deveoping xpbproxy.
The 'active' switch in preferences just disables the in-server xpbproxy (not this standalone).
(cherry picked from commit 42944936326ef8732f622db9f75b79a92980550d)
This prevents visuals with odd sizes. The machine I use didn't have
this problem, but it shows up on some others.
(cherry picked from commit ed181382ddeb77019577d39b9c06b1cd839e18e4)
Use the settings queried from the system in xprScreen.c, rather than those 2 calls.
The 2 calls increased the total number of visuals a great deal (when using GLXEXT),
and not all of the visuals were usable with GLX. Some of the visuals aren't usable
with GLX still, such as DirectColor, but that seems to be acceptable based on my
understanding of the manual that states "a subset of visuals are made available
for OpenGL rendering."
(cherry picked from commit 373b8a5f32509722e06d8776109e6c3f06645ee0)
It was returning inverted values in comparison to the 1.4 branch. This resulted in
the windows not drawing due to a deep path of: RootlessReorderWindow ->
SCREENREC(pScreen)->imp->DoReorderWindow(winRec) - > xprDoReorderWindow ->
AppleWMDoReorderWindow.
(cherry picked from commit d1d398db762fe7d5720f9b5fafa2bbe8372fceac)
As reported in http://bugs.freedesktop.org/show_bug.cgi?id=18438
the server suggests reconfiguring HAL if AllowEmptyInput is enabled
and no input devices are known.
Instead of that notice, if HAL is disabled at configure time,
AllowEmptyInput is enabled in the config and no input devices are
found report those facts and recommend disabling AllowEmptyInput.
When using any XAAPixmapOps, we call into unknown but freshly
unwrapped callbacks (like fb ones). Unlike the XAA*Fallback calls,
we did so without syncing first, exposing us to all kinds of
synchronisation issues.
I believe that the rendering errors appeared now because *PaintWindow
vanished (e4d11e58), and we just use miPaintWindow instead. This
takes a less direct route to the hw and ends up at
PolyFillRectPixmap, which very often left drawing artifacts.
We now sync accordingly, and no longer get the rendering artifacts i
was methodically reproducing on radeonhd, radeon, unichrome...
Also, in order to allow driver authors to remove extensive syncing
or flushing to hide this issue, create XAA_VERSION_ defines, put
them in xaa.h and bump the patchlevel.
(novell bug #435791)
When setting the depth to 24, leave bpp unset so the logic to pick
a supported value is used instead of ignoring the driver's preference
and forcing 32 bpp.
GL/capabilities.c: Add handleDepthModes(), and extend
handleRendererDescription() for the various depth and multisampling flags.
Add initialization of the new config options to initConfig().
GL/capabilities.h: Add depth and multisample config members.
GL/visualConfigs.c: Add depth and multisampling support to the visual config
setup.
(cherry picked from commit f527381eea6a8ae6cd791475b2060d21fcf8efb2)
GL/capabilities.c: #if 0 (for now) any capabilities above 8 bits per channel,
because they introduce drawing problems.
GL/indirect.c: Comment out some visual setup code that shouldn't be running, and
actually seemed to cause some problems. The current visualConfigs.c code seems
to do a reasonable job of setting up visuals for XQuartz.
GL/visualConfigs.c: Make use of the proper visual .class. Eliminate depth 0.
It seems we really just want 24 for now, and 0 I think was a flaw in the original
code.
(cherry picked from commit 1e5f63f15e13a40a6e69a1505934d10d6990b6a2)
Works around a silly bug in the kernel that causes wakeup storms after
too many keypresses. Should fix the kernel bug too, but this at least
keeps the idle wakeup count below 1000/sec.
When a user specifies the position of an output for which no modes exist
(for whatever reason) assume that the width and height of this output
is 0. The result will be the same as if this output isn't taken into
consideration at all and thus should be sane. It will prevent a segfault
when trying to determine the width and height of a non-existent mode.
This is used in libGL to determine a preferred visual. glxinfo -v will also
report "visualCaveat=Slow" for such visuals.
(cherry picked from commit d5c17f585a240be9f9135975738e62951cde3353)
Also merge sun_bios.c into sun_vid.c and upstream Solaris patch to
keep aperture device open, to allow mappings to occur after X server
has given up uid 0.
Maybe one day I stop doing stupid patches like
a3a7c12fcf.
So, if X < low, reset to low, and _not_ to high.
If X > high, reset to high, and _not_ to low.
It seems that we were calling copy_completed: too soon. Now we return instead
of falling through to the free_propdata, and copy_completed:.
(cherry picked from commit 5797d5b662817a3369a74a673f4a7c995cde75cf)
Eterm ends up setting the type of the property to TARGETS, instead of ATOM.
That's why it wasn't working.
(cherry picked from commit 9be5998ede7427f14dd9597e117b3d6b427ba4e5)
This may work, unfortunately I don't have test apps that fail.
The way it works is by using an NSImage class initWithPasteboard:
method, which we then get the TIFFRepresentation of, and convert
to PNG or JPEG.
The TIFFRepresentation uses NSTIFFCompressionNone; which should be
lossless.
(cherry picked from commit 8d048cfa956f4a0860250cc836a6748912b37ad8)
This gives us a *lot* more visuals, and they should be more accurate.
Some of the visuals may have been wrong before. This may enable more
OpenGL programs to behave correctly.
I also suspect libGL needs a little work to handle some of these correctly.
(cherry picked from commit 98a084ce9c455260ecdb5f8eecb67f33dbb53b69)
This consists of two parts:
In the implicit server layout, ignore those drivers when looking for a core
device.
And after finishing the server layout, run through the list of devices and
remove any that use mouse or kbd.
AEI is mutually exclusive with the kbd and mouse drivers, so pick either - or.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The precedence of == is higher than that of &, so that code was
probably buggy.
xf86Init.c: In function 'DoModalias':
xf86Init.c:300: warning: suggest parentheses around comparison in operand of &
xf86Init.c:304: warning: suggest parentheses around comparison in operand of &
xf86Init.c:308: warning: suggest parentheses around comparison in operand of &
xf86Init.c:136: warning: function declaration isn't a prototype
xf86Init.c:243: warning: function declaration isn't a prototype
xf86Init.c:249: warning: function declaration isn't a prototype
xaaInit.c: In function 'XAAInit':
xaaInit.c:201: warning: implicit declaration of function 'miInitializeCompositeWrapper'
xaaInit.c:201: warning: nested extern declaration of 'miInitializeCompositeWrapper'
Add missing includes to fix the following warnings:
xf86DGA.c: In function 'DGAProcessKeyboardEvent':
xf86DGA.c:1050: warning: implicit declaration of function 'UpdateDeviceState'
xf86DGA.c:1050: warning: nested extern declaration of 'UpdateDeviceState'
xf86Xinput.c: In function 'xf86ActivateDevice':
xf86Xinput.c:303: warning: implicit declaration of function 'AssignTypeAndName'
xf86Xinput.c:303: warning: nested extern declaration of 'AssignTypeAndName'
xf86Xinput.c:311: warning: implicit declaration of function 'DeviceIsPointerType'
xf86Xinput.c:311: warning: nested extern declaration of 'DeviceIsPointerType'
xf86Xinput.c:324: warning: implicit declaration of function 'XkbSetExtension'
xf86Xinput.c:324: warning: nested extern declaration of 'XkbSetExtension'
Add automatic detection of the graphic driver to load for sbus devices.
This allows xorg to work on those devices without a "Device" section.
Debian bug#483942.
Signed-off-by: Julien Cristau <jcristau@debian.org>
We need to revisit the GL/indirect.c changes. I think indirect.c should
be using the same feature detection and GLX visual config code. The
indirect changes will require testing...
(cherry picked from commit 49b7a7c6f20ca85d4d624444eb83db2f91344591)
Also set AutoAddDevices and AutoEnableDevices to their defaults.
And in doing so, switch the rest of the defaults over to named intializers.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Add dump_prefs() for instrospection.
Make prefs_get_bool a little more clear.
In get_property don't assume that the Mac realloc(NULL, 0); returns
non-NULL. We shouldn't depend on implementation-defined behavior too
much.
Add more commentary in various spots.
Add TARGETS in the TARGETS response. I don't know why some X11 apps
do this, but it could be something that some weird toolkit/app tests
for.
In reload_preferences add preferences synchronization, so that xpbproxy
reloads the preferences, and picks up any changes.
Fix a typo/misspelling of the sync_clipboard_to_pasteboard preference.
(cherry picked from commit 165cbbb90c793d9335ea76f0274b1f60ad295903)
Usually, the console is set to RAW in the kbd driver. If we hotplug all input
devices (i.e. the evdev driver for keyboards) and the console is left as-is.
As a result, the evdev driver must put an EVIOCGRAB on the device to avoid
characters leaking onto the console. This again breaks many things, amongst
them lirc, in-kernel mouse button emulation and HAL.
This patch sets the console to RAW if AllowEmptyInput is on.
Use-cases:
1. AEI is off
1.1. Only kbd driver is used - behaviour as-is.
1.2. kbd and evdev driver is used: if evdev does not grab the device,
duplicate events are generated.
2. AEI is on
2.1. Only evdev driver is used - behaviour as-is, but evdev does not need
to grab the device anymore.
2.2. evdev and kbd are used: duplicate key events are generated if evdev
does not grab the device.
1.2 is a marginal use-case that can be fixed by adding a "grab" option to the
evdev driver (update of xorg.conf is needed).
2.2 is an issue. If we have no ServerLayout section, AEI is on, but devices
specified in the xorg.conf are still added [1], resulting in duplicate events.
This is a common configuration and needs sorting out.
[1] 2eaed4a10f
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
I've seen about one case in three years where this has actually been
correlated with the real cause of failure, and we've trained people to
freak out about X_WARNING, so let's be less alarmist.
Very cute, Samsung, not only do you claim to be 16cm by 9cm in the
global size record, you also claim to be 160mm by 90mm in the detailed
timings. Grrr.
If absolute events were posted, dixflags got set conditionally on whether the
valuators are different from the last posted set of values.
If dixflags are undefined however, the DIX interprets them as relative
valuators. Fix this by making sure defining dixflags is always defined.
X.Org Bug 17724 <http://bugs.freedesktop.org/show_bug.cgi?id=17734>
NIDR should be used to create a new SD from e.g. within a driver.
DIDR should be used to remove a device from the server.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Use ErrorF for an error message after an xcalloc failure, and return instead of falling through to GlxSetVisualConfigs, or abort()ing at the test branch.
(cherry picked from commit 1056700971fd5c034396ed6dbea15e092f0c6332)
Commit the darwin.c changes I missed in the last commit, for calling
setVisualConfigs().
(cherry picked from commit eb3c014e1710bf0b93bda10ddb9b795cd150d02d)
Add a setVisualConfigs that is called before the fbScreenInit, to setup the __GLXvisualConfigs.
(cherry picked from commit fc86f9e4482043eca76d9d7a96e166be1aabf674)
If you need to bail out the server, use Ctrl-Alt-Fx, or enable zapping
if it bothers you that much. If Ctrl-Alt-Fx is broken, nag me until
it's permanently fixed.
The nvidia driver currently uses these hooks to work around problems where RAC
will disable access to the hardware at unexpected times. This change restores
these hooks until we can come up with a better API for working around RAC.
This reverts commit c1df4fbede.
The nvidia driver currently uses these callbacks to work around problems where
RAC will disable access to the hardware at unexpected times. This change
restores these hooks until we can come up with a better API for working around
RAC.
This reverts commit d7c0ba2e9e.
Conflicts:
hw/xfree86/loader/xf86sym.c
Some BIOSes (hi XGI!) will attempt to enumerate the PCI bus by asking
for the config space of every possible device number. This despite
perfectly functional BIOS methods to enumerate the bus exactly.
If anyone can come up with an example of a bus where:
- both i/o and memory resources are addressable
- access to them can be controlled
- but they can't be controlled independently
then by all means, reinstate this logic.
instead of calling CFRunLoopRun() directly. The leak wasn't reproducible on
this machine, but someone was able to produce a leak trace with Instruments
that indicates it was leaking in the CFRunLoopRun() path.
x-input.m: dequeue and ignore events when pbproxy_active is false.
x-selection.h: add an is_active method that is used by x-input.m to ignore
events.
x-selection.m: Handle nearly every preference, except for primary_on_grab,
which I don't really understand yet.
(cherry picked from commit 4d51ad851e64da83cbdfb0a4a22428418a7bcf75)
Remove some unnecesssary headers.
Remove some dead code that was never called or used in pbproxy.
Make use of an NSAutoreleasePool in x_init. It could potentially cause a leak
on a startup without this.
Start adding reload_preferences to the x_selection class, as well as event
handling for that.
(cherry picked from commit 602e8ba8f7ee196696bc9e3cea6ecdf3200dcf5c)
Fix the usage of the NSString cStringUsingEncoding: - it doesn't NUL
terminate the string, which lead to a bus error. So, we use
lengthOfBytesUsingEncoding: to get the length in bytes instead of
strlen().
(cherry picked from commit 6333d619e747c3b6bd3ba7557e35c0e5f6daa40f)
2 of the paths leaked, when INCR transfers were done. Now we
are leak free according to the leaks program for all transfers
I have tried so far.
(cherry picked from commit aa98db576bc02f0765cb35d0282a894ba3778213)
NSAutoreleasePool. Now the usage is consistent. In x_input_run()
we create a pool, and release it after processing the XEvents.
Add some getpid() output to main for debugging. It needs a bit more
testing before the next release.
Don't retain the NSPasteboard as the old code did. That may have
contributed to the leak, and it made it so that we needed the
NSAutoreleasePool created in main().
Remove the _known_types, and _pasteboard instance variables from
the x_selection class. They aren't needed anymore.
The leaks program now indicates 0 leaks after some usage. I want
to test further, but this seems much better, and my memory usage
graph indicates it's not growing.
(cherry picked from commit b245d84a72ee3929546cd11a6eba3c60fb4a4d95)
macro causes a leak (according to the leaks program).
Attempt to fix several other leaks with release method calls.
For some reason the process still grows more than it should...
I will need to use some better methods than leaks, and malloc_history
I suspect. Whatever is leaking, it's hard to find. I need to isolate
the cases more.
Add a missing image/jpeg branch.
Remove read_prop_32 - it's not used.
(cherry picked from commit 63a680354dcb545fef935ac97596dd35ceaed960)
According to the press release:
Previous SGI contributions to the free and open source community
are now available under the new license. These contributions
include the SGI® OpenGL® Sample Implementation, the GLX™ API and
other GLX extensions.
[...]
"SGI has been one of the most ardent commercial supporters of free
and open source software, so it was important to us that we continue
to support the free software development community by releasing our
earlier OpenGL-related contributions under this new license," said
Steve Neuner, director of Linux, SGI. "This license ensures that all
existing user communities will benefit, and their work can proceed
unimpeded. Both Mesa and the X.org Project can continue to utilize
this code in free software distributions of GNU/Linux. Now more than
ever, software previously released by SGI under earlier GLX and SGI
Free Software License B is free."
"The GLX API" is here read to include the original GLX source release
from:
http://www.sgi.com/products/software/opensource/glx/download.html
ftp://ftp.sgi.com/sgi/opengl/glx/glx1_2.1.tgz
which includes glxext.c as included in XFree86, from which our copies
in glx/ and hw/dmx/glxProxy/ are derived.
Move the struct atom_list into the x-selection class, so that it's
no longer a global variable named atoms. This may ease pthread
integration and reduce the chances of symbols conflicting.
(cherry picked from commit c1403c713ca80104ae3736bd2ed1eb6ffa5192b6)
We may need another branch to convert a PICT to a PNG or JPEG. For now
TIFF works well in all of the test image copying apps when converted to
PNG or JPEG with an NSBitmapImageRep class.
(cherry picked from commit adf339d8f948fc1e308dbcae38fcfce504b5b0ab)
INCR transfers mixed with a CLIPBOARD change.
Fix a bug with some UTF-8 transfers. I can only guess that my UTF-8
tests before were inadequate. I can now copy/paste any characters between
uxterm and Textedit.app.
(cherry picked from commit 7ca1532e8e6e2c733c9c508eee0de73d09ecb947)
to verify that the behavior didn't change.
main.m: XInternAtom compound_text, and atom_pair.
pbproxy.h: Add compound_text and atom_pair to the struct atom_list.
x-selection.m: Add an #include of Xutil.h. Refactor the reply struct
initialization to be done in a common place. Add send_reply: to simplify
the code a bit more. Add send_compound_text: which handles the
COMPOUND_TEXT type. Add the beginnings of a send_multiple:. Change
handle_image:extension: to handle_image:. The extension: message isn't
needed anymore.
(cherry picked from commit 1e9460abdf5bafe46215966bbef3e796cb1c33e0)
We can now copy and paste images to and from X11. Text copying and
pasting works as well.
The NSPasteboard can contain TIFF or PICT images, and pbproxy will
translate to an image/png or image/jpeg request, and list those in the
TARGETS.
I added a description of the basic design at the top of x-selection.m.
I removed the request_data x_selection class struct. It's not needed.
(cherry picked from commit 4a8daf884694c9c420c45d427f1f84e608e7e48f)
to a TIFFRepresentation for use with NSPasteboard.
This has been tested with the Gimp and works with some minor quartz-wm changes.
The Finder clipboard shows the image updates after an Edit -> Copy.
(cherry picked from commit 12912adaeea759d30f96d8ae51a84fd1659ea0ac)
This change adds some [self own_clipboard] calls in the necessary places to get the proper greedy behavior.
UTF8_STRING and STRING properties seem to work well now with the test cases (PRIMARY, and CLIPBOARD). I can copy from several different X apps, and have the behavior be correct when pasting. I also verified that quartz-wm isn't doing the copying, by disabling the quartz-wm paths.
(cherry picked from commit 934669f732c28f07b9d934d8f8f0b63ccfebd900)
Add TRACE() calls where appropriate to try to figure out why we are losing CLIPBOARD at times, after transferring PRIMARY to the NSPasteboard.
Use the new pbproxy_clipboard_to_pasteboard where appropriate.
(cherry picked from commit 40190675a6c1889cca3574e5d1a9c16ab74315a7)
Convert the puts usage to use DB().
Add the initial handle_image method.
Check for nil in the NSString instantiation in various places.
Add some commentary to enhance the clarity of why I did some things.
(cherry picked from commit 37361567b65241eab64e8b30cd9729d0e71a86d2)
Under the terms of version 1.1, "once Covered Code has been published
under a particular version of the License, Recipient may, for the
duration of the License, continue to use it under the terms of that
version, or choose to use such Covered Code under the terms of any
subsequent version published by SGI."
FreeB 2.0 license refers to "dates of first publication". They are here
taken to be 1991-2000, as noted in the original license text:
** Original Code. The Original Code is: OpenGL Sample Implementation,
** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
** Copyright in any portions created by third parties is as indicated
** elsewhere herein. All Rights Reserved.
Official FreeB 2.0 text:
http://oss.sgi.com/projects/FreeB/SGIFreeSWLicB.2.0.pdf
As always, this code has not been tested for conformance with the OpenGL
specification. OpenGL conformance testing is available from
http://khronos.org/ and is required for use of the OpenGL logo in
product advertising and promotion.
The check can fail because the output from FBIOGET_VSCREENINFO is used to set
Clock in fbdev2xfree_timing(). Then in fbdevHWSetMode(), xfree2fbdev_timing()
is called which sets the pixclock based on Clock. The resulting circle results
in slight rounding errors, causing the comparision check in fbdev_modes_equal
to fail.
- Redo damage naming for more consistency.
- Call post submission functions only where appropriate.
- EXA can now live without it's odd damage workarounds.
stuck-modifier fixes (capslock)
3button-emulation now doesn't send the modifier key with the click
Added other options to fake_button2 and fake_button3 defaults options:
({l,r}{control,alt,command,shift})
(cherry picked from commit 8fb6a1cf44c35a20dfb0c05c9824f94898f88da7)
(cherry picked from commit ae9c1b3cfb3874b4d1251681c24bda91c398bcab)
No point warning about missing driver hooks, that just means the person
who gave you the driver is inept. Might as well just crash. Also,
just name anonymous screens as screen%d instead of failing after the 36th
screen. Bonus points if you can figure out what the failure mode would
be on the 36th screen, and what the effective screen limit was.
There is no way this code can have been building for anyone since pciaccess
was merged. BSD and Linux were already using OS code on sparc, the only
people who could want this are Solaris, who should be using pciaccess
anyway.
This code was effectively only used in ix86Pci.c to select PCI config
access type. Nobody should be using that path anymore, in the glorious
pciaccess world; kernel services should get it right for you.
the defaults from InitVelocityData() or hypothetic driver-side changes
are now respected, not overridden.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Readded the old exec() server startup path for regression testing.
Don't use the dynamic fd addition code since it's not quite working correctly.
(cherry picked from commit 08f3fe153edc5ab4ca010e8ce82d5c3fc0ddb72c)
If the device doesn't have any BARs then it's just a stub for some
lame operating systems that need one PCI device per output for
multihead. No point in warning about it.
It's all a bit wonky since both sis(4) and xgi(4) claim to support the
Volari Z7 and V5/8 (0x0020 and 0x0040), so let's side with xgi(4), why
not. Note that the V3 (not V3XT) identifies itself as a trident chip.
Put out a warning if xorg.conf has InputDevice sections, but these aren't
referenced in the used ServerLayout. This is only performed if AllowEmptyInput
is enabled.
The reason behind this is that the server used to auto-add the first
mouse/keyboard sections if none where referenced. Now, with HAL and AEI
enabled by default, setups that relied on this auto-adding break and are left
without input devices. The least we can do is warn them.
Us shipping a GUI configuration utility (especially as part of the
server!) was pretty pointless. There was pretty much nothing it could
configure which wasn't already runtime adjustable: if you could get a
server up with functioning input and output, there wasn't much xorgcfg
could do for you.
Au revoir.
- Use a single common function to compute reducedness.
- Call it from both the old-school and new-school mode validation paths.
- Define monitor reduced-blanking support in accord with EDID 1.4.
- Attempt to filter RB DMT modes away from the "standard" EDID pool if
the monitor doesn't claim RB support.
On some panels you end up with all of:
- No range descriptor
- No description of physical connectivity
- Native panel size mode in standard timings list
In principle you're supposed to use the timings for that mode from the DMT
spec, but in practice the DMT spec has timings for both 1920x1200 normal
and 1920x1200RB, and the standard timing field gives you no way to
distinguish. And, of course, the non-RB timings don't fit in a single
DVI link.
A couple #if defined(Lynx) && defined(sun) had become just if defined(sun),
resulting in wrong settings for Solaris builds, so they're now just deleted.
OsInitColors always just returned TRUE, so just remove calls to it and
insane special-case logic. Remove unused kcolor.c implementation, and
merge oscolor.h into oscolor.c since it was the only user. Remove
open-coded strncasecmp in oscolor.c.
Since we no longer need to call OsInitColors after reading the config
file, just call PostConfigInit() from one place, and move PM handling to
one place so we can install the signal handlers earlier.
If devices are prepended to the list, their wake-up order on resume is not the
same as the original initialisation order. Hot-plugged devices, originally
inited last, are re-enabled before the xorg.conf devices and in some cases may
steal the device files. Result: we have different devices before and after
suspend/resume.
RedHat Bug 439386 <https://bugzilla.redhat.com/show_bug.cgi?id=439386>
- Allow returning multiple drivers to try for a given PCI id (for instance,
try "geode" then "amd" for AMD Geode hardware)
- On Solaris, use VIS_GETIDENTIFIER ioctl as well as PCI id to choose drivers
- Use wsfb instead of fbdev as a fallback on non-Linux SPARC platforms
Remove AEI check from configImpliedLayout as the setting isn't actually parsed
at this point anyway (written by Sasha Hlusiak).
Resurrect checkInput() and check for devices there if AEI is false (this also
creates the default devices if required).
Set AllowEmptyInput to enabled by default if hotplugging is enabled.
If no Screen is specified in the ServerLayout section, either take the first
one from the config file or autogenerate a default screen.
X.Org Bug 16301 <http://bugs.freedesktop.org/show_bug.cgi?id=16301>
<http://bugs.opensolaris.org/view_bug.do?bug_id=6685465>
This bug is caused by Xephyr not handling the RGB byte order correctly
of the server where Xephyr is displaying on. The previous code just
assumed that the order was RGB and did not take into account that
Xservers may use different order (such as BGR).
The fix is to add a function to calculate the byte order and bits
to shift based on the visual mask and the visual bits_per_rgb (which
is usually 8, but could be server dependent). Since the shifts won't
change once the display connection has been made, I can cache these
values so that Xephyr doesn't have to keep recalculating them everytime
it tries to translate the Xephyr colormap entries for Xephyr clients to
the actual server colormap entries (i.e. calling the function
hostx_set_cmap_entry() repeatedly for every colormap entry).
RandR 1.1 has a physical size for each mode. It used to be that the DIX would
remember these modes and pass them back up to the DDX when changing the screen
configuration. The DDX uses RR_GET_MODE_MM to query the driver for the physical
dimensions of the screen, allowing it to preserve the DPI.
With RandR 1.2, the physical dimensions are stored as part of the output, rather
than per mode. The DIX only uses the sizes passed in from the DDX to select the
mode pool for the "default" output, and forgets the physical sizes. Then, when
reconfiguring the screen, it makes up a new RRScreenSizeRec using the dimensions
from the output, screwing up the DPI.
This change works around this problem by ignoring the DIX and querying the real
size from the driver.
This reverts commit 76576c87b0.
which was an incorrect revert of previous ABI bumps. Those
responsible for the accidental ABI bumps in both directions
have all been sacked.
This allows xf86-input-mouse to build again, for example.
Spiritual revert of 1fa4de80fc. Intel's C
compiler claims to be gcc-compatible; if they're not defining the same
macros as gcc then that's their bug, not ours. Even if we were to do
this aliasing we should do it once and for all in servermd.h.
Use only %di to name the PCI register to read/write, rather than %edi.
DOS is only expecting the base PCI config space anyway, and the BIOS
might be using the high bits of %edi.
Yes, this is a 486+ instruction and thus not strictly legal in vm86
mode, but enough BIOSes use it (looking at you VIA) that we might as
well implement it.
This code hasn't been updated with anything even resembling what anyone is
shipping in nearly thirty months. It hasn't built out of the box since
7.1. Most of its features over AIGLX are accomplished with DRI2 and
friends.
In the single output enabled case we never enter the loop and test
never gets set and so we fail to match a good mode.
This was causing my 2560x1600 to end up at 2048x1536.
Modelled after the xfree86 code. Call miDCInitialize to init the SW rendering
engine, then take the pointers, store it in a xnest-local variable, and put
the xnest-specific sprite funcs in place. In the xnest sprite funcs, call
through to the mi sprite funcs after doing xnest-specific stuff.
The problem happens if Monitor/Card combo doesn't provide EDID info,
and the XFree86-VidModeExtension extension is used.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
Recording damage from other operations (e.g. creating a client damage record)
may confuse the migration code resulting in corruption.
Option "EXAOptimizeMigration" appears safe now, so enable it by default. Also
remove it from the manpage, as it should only be necessary on request in the
course of bug report diagnostics anymore.
GNU/kFreeBSD defines __FreeBSD_kernel__, but not __FreeBSD__.
Unify preprocessor conditionals between variable declaration and use.
Debian bug #482550.
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
This copies over the files generated from mesa/src/mesa/glapi. There's
a corresponding mesa commit that makes it easy to generate the glapi files
straight into the xserver tree when the XML definitions change.
The only few files that are copied from mesa but aren't generated are
glapi.[ch] and glthread.[ch]. Everything in there is technically DRI
driver API and the whole setup is still a bit fragile, but it's not a new
problem.
The --with-mesa-source configure option is still around since other
parts of the server (XGL and DMX - grep for MESA_SOURCE) need that,
but for common case of building with GLX and AIGLX support, that
option is no longer needed.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
If the monitor isn't reduced-blanking (either through EDID logic, or
config file setting), then remove RB modes from the default pool. Any
RB modes from the driver and config file pools will stick around though;
you asked for them, you got them.
Seeing as this code seems to be specific to OpenBSD I don't think
__x86_64__ should have been added there at all. It appears to have
been added wherever __amd64__ existed before which is wrong. I
think that part of the commit should be reverted but also all four of
the checks should be __OpenBSD__ && __amd64__ instead of two one
direction and two flipped.
The first guess used to be "is the preferred mode for one output the
preferred mode on all outputs". Instead, do "find the largest mode that's
preferred for at least one output and available on all outputs".
Old logic was just the first one that happened to have an associated
CRTC. The new logic tries to find one that's definitely connected, has
probed modes, and has the largest candidate mode.
Most of these drivers didn't work. ati was the only one that even came
close. The igs, ipaq, itsy, pcmcia, savage, sis530, trident, trio, ts300,
and vxworks directories have never built since modularisation, so clearly
no one can miss them.
It was removed and simplified some conditionals. We don't need test for
pDev->isMaster inside xf86CursorSetCursor() because only MD enters there.
In the last chunk, ScreenPriv fields were being assigned without need, so
that code was wrapped inside the conditional to avoid it.
I also tried to make the identation more sane in some parts that I touched.
Signed-off-by: Tiago Vignatti <vignatti@c3sl.ufpr.br>
Minor modification, part of the original patch led to cursors not being
updated properly when controlled through XTest.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
The only function that cat set SWCursor before xf86DeviceCursorInitialize()
is xf86InitCursor() when VCP and is created.
Signed-off-by: Tiago Vignatti <vignatti@c3sl.ufpr.br>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Missing parameter caused event processing to go nuts when checking valuators.
X.Org Bug 15936 <http://bugs.freedesktop.org/show_bug.cgi?id=15936>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
KdInitOutput() used to enable Composite when it was disabled by default,
but now this hack prevents ``-extension Composite'' from working.
Remove it, as Composite is enabled by default anyway.
Use dummy config functions to replace those from config/config.c, and
therefore do not link Xprt with $CONFIG_LIB.
Works around an endlessly spinning loop in dix/dispatch.c::Dispatch()
(WaitForSomething() not waiting) when built with dbus, which was
causing Xprt to use 95% cpu.
Since glyphs are stored in pixmaps now, they can make their way into VRAM,
which invalidates a bunch of fast-path assumptions in the XAA code. Thus
you end up doing color-expands or WriteBitmap from la-la land and your
aliased glyphs go all funny.
Since XAA isn't ever growing the ability to do sane glyph accel, just force
glyph pixmaps into host memory by catching them at CreatePixmap time.
We need a manual call to SetCursor when we switch from SW to HW rendering and
the other way round. This way we display the new cursor after removing the old
one.
In addition, we only update the internal state for the VCP's sprite. This way,
when we switch back to HW rendering the state is up-to-date and wasn't
overwritten with the other sprite's state.
The second part is a hack. It would be better to keep a state for each sprite,
but then again we don't have hardware that can render multiple cursors so we
might as well do with the hack.
Switches back to HW cursors when sprites other than the VCP are removed.
The current state requires the cursor to change shape once before it updates
to SW / HW rendering (whatever is appropriate), e.g. by moving into a
different window. Until this is done, the cursor is invisible.
This patch only creates a Files section if required, so if no entries are
added, an empty Files section will not be created.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
more conservatively (to match Linux's Wacom driver) and
we now receive all tablet-related events.
(cherry picked from commit 588683cecca2cfc65a28de035cd6ee3d64ff59d2)
LeaveVT/EnterVT cycles will free/realloc shadow frame buffers. Because of
this, the presense/absence of that data is insufficient to know whether
the screen function wrappers are necessary. Instead, the 'transform_in_use'
flag should be used.
This patch also adds 'xf86RotateFreeShadow' for drivers to use at LeaveVT
time to free the rotation data; it will be reallocated on EnterVT.
In DeleteInputDeviceRequest, leave the conf_idev (which is shared with
xf86ConfigLayout.input) alone for devices that were specified in the
ServerLayout section of the config file. This way, in the next server
generation we are left with what was the original config and can thus re-init
the devices.
This is an addon to 6d22a9615a, an attempt to
fix Bug 14418.
X.Org Bug 15645 <https://bugs.freedesktop.org/show_bug.cgi?id=15645>
X.Org Bug 14418 <https://bugs.freedesktop.org/show_bug.cgi?id=15645>
The previous check works in the master-branch, but doesn't work with MPX. We
actually copy the SD's information into the MDs public.devicePrivate, so we
need to explicitly check whether a device is a MD before freeing the module.
glcore gets linked with -ldl, -lpthread for s3tc and glapi
xserver needs
DLOPEN_LIBS - to dlopen the glcore dso
LD_EXPORT_SYMBOLS_FLAG - to export symbols for glcore to use
the ld flag is added to kdrive only when GLX is enabled, the net overhead for
Xephyr is ~155KB, could be reduced with --dynamic-list.
When starting up kdrive/fbdev, if the current framebuffer mode is sensible use
that unless told otherwise.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
XKB was disabled in 08928afb05, with the comment
"Disable XKB, as we can't yet use it". Seems like "yet" is over, running GNOME
and changing XKB settings seems to work in Xnest now.
X.Org Bug 10015 <https://bugs.freedesktop.org/show_bug.cgi?id=10015>
Use __libmansuffix__ instead of __oslibmansuffix__ which isn't getting
replaced, and rewrap some text to get __xservername__ replaced in the
description of Option "Accel" (cpp doesn't like the preceding quote).
This extension provided bug-compatibility with pre-X11R6, but has been
stubbed out in our server since 2006 to return BadRequest when you actually
asked for it.
(cherry picked from commit 4e2c6dbabdbbaaca213fd08edd422de15d0900cc)
required because of commit 7c0709a736,
which made requestingClient in dix specific to Xprint only.
Add to XPRINT_LIBS in hw/xprint/Makefile.am in front of
$(XSERVER_LIBS) to override definitions in libdix.la for standard xservers.
Follows 571206832d (providing -DXPRINT
to xprint subdirs).
Note it may be possible to restructure the code so that
requestingClient is stored elsewhere than in dix. See discussions
following http://lists.freedesktop.org/archives/xorg/2008-March/033844.html
If this is done it may be possible to revert this commit (if not 571206...).
-DXPRINT had only been set for Xprt in hw/xprint/Makefile.am
After commit 7c0709a736 it is also
required for ps/PsArea.c and PsFonts.c to ensure ‘requestingClient’ is
defined, so make it a global Xprint definition in configure.ac.
(cherry picked from commit 28a6719fd486d9a9cecad0b057d9ea7c59c66055)
The DDX (xfree86 anyway) maintains its own device list in addition to the one
in the DIX. CloseDevice will only remove it from the DIX, not the DDX. If the
server then restarts (last client disconnects), the DDX devices are still
there, will be re-initialised, then the hal devices come in and are added too.
This repeats until we run out of device ids.
This also requires us to strdup() the default pointer/keyboard in
checkCoreInputDevices.
X.Org Bug 14418 <http://bugs.freedesktop.org/show_bug.cgi?id=14418>
A few pieces of code were abusing this define for other purposes, which are
converted to #ifndef DEBUG instead. There should be no ABI consequences
to this change.
The rationale is that having the define in xorg-server.h also disables
assert() drivers, which is unexpected, and also difficult to avoid since
xorg-server.h is included in their config.h, and you can't put a #undef in
config.h. As for removing it from the server instead of moving it to an
internal header, we probably shouldn't have unnecessary assert()s in
critical server paths anyway, and if we do we could #define NDEBUG in the
specific cases needed.
Some pointer devices send key events [1], blindly getting the paired device
crashes the server. So let's check if the device is a pointer before we try to
get the paired device.
[1] The MS Wireless Optical Desktop 2000's multimedia keys are sent through
the pointer device, not through the keyboard device.
The jstk code for Joysticks is not used by any module, was never actually compiled and uses an API
that is deprecated these days.
No reason to keep it.
functions to change state when the keyboard is reloaded; instead,
pass it as an event.
(cherry picked from commit 7e653f806ff5508aace059312156f319a9ed4479)
InitValuatorDeviceClass.
Add InitProximityClassDeviceStruct call to prepare for tablet support.
(cherry picked from commit 1bd980a5b114f5320360943214f8f9f23b29c1e3)
Get rid of glcontextmodes.[ch] from build, rename __GlcontextModes to
__GLXcontext. Drop all #includes of glcontextmodes.h and glcore.h.
Drop the DRI context modes extension.
Add protocol code to DRI2 module and load DRI2 extension by default.
Since there's no way to safely know how many blocks xf86DoEDID_DDC2 would
return, add a new xf86DoEEDID entrypoint to do that, and implement the
one in terms of the other.
The latter doesn't give you the option's value, it just tells you if
it's present in the configuration. So using Option "EXANoComposite" "false"
disabled composite acceleration.
This patch (and not setting HARDWARE_CURSOR_BIT_ORDER_MSBFIRST on big endian
platforms) fixes it for me with the radeon driver and doesn't break intel.
Correct patch this time :)
Should have done this in the first place. Since we're checking for the absence
of the get_crtc callback in the first place, we'll short circuit the later call
and disable the output, so the ugly "continue" block is unnecesary.
By adding a new output callback, ->get_crtc, xf86SetDesiredModes is able to
avoid turning off outputs & CRTCs if the current output<->CRTC mappings are the
same as the desired configuration. This helps avoid flickering displays at
startup time, which speeds things up a little and looks better.
Unless we check for vtSema before calling into the CRTC and output callbacks,
we may end up trying to access video memory that no longer exists, leading to a
crash. So if we don't have vtSema, return FALSE to the caller, indicating that
we didn't do anything.
Fixes#14444.
Actually more like in the mainline case, where the ideal mode happens to
be the very first aspect match on the first monitor. But let's not
split hairs.
The address written to 0xcf8 contains the PCI slot address to send the
config cycle to. However, we would ignore that and always send the
cycle to the device whose BIOS we were running. This breaks some
integrated graphics platforms that have explicit knowledge about the
system's host bridge, for example.
While the ScreenRec's notion of size in millimeters would get updates,
the RANDR 1.1 notion wouldn't, so your screen would appear to be square
and probably at some ludicrous DPI.
xserver and libpciaccess both need to open /dev/xf86, which can only
be opened once. I implemented pci_system_init_dev_mem() like Ian
suggested. This requires some minor changes to the BSD-specific
os-support code. Since pci_system_init_dev_mem() is a no-op on
FreeBSD this should be no problem.
i.e., don't check for the end of the list by ->name == NULL, since that
won't work now. Fix the consumers of xf86DefaultModes to use the new
explicit size as well.
In order to report accurate values to users of the RandR property interface,
it's sometimes necessary to ask the driver to update the value (for example
when backlight brightness changes without the server's knowledge, due to hotkey
events or direct sysfs banging).
This patch wires up the core server code with a new xf86CrtcFuncs callback,
get_property, to allow for this.
The new code is available under the RANDR_13_INTERFACE define, which in turn
depends on the RANDR_12_INTERFACE code.
Old heuristic was to find the first monitor that expressed a preference,
then attempt to get all other monitors to agree. This doesn't work
particularly well when the two sets of modes don't precisely intersect,
you get overlapping-but-not-identical output geometry and things go wrong.
New heuristic is:
- Exact user preference, if given
- Exact output preference, if the same for all outputs
- Best (largest) mode of modes common to all outputs:
- with the same aspect ratio as all outputs (may be NULL)
- with 4:3 aspect ratio
- Then the old heuristic to try to get something lit
Note that it is simply not doable to have a reliable initial output guess if
you insist on trying to clone all outputs together. It's far too easy to
end up with displays that simply don't have modes in common. We need to
switch to right-of placement someday, once we're not limited to CRTC size
limits and we have working multi-GPU in RANDR.
If you don't do this, then Modes "800x600" in the Display subsection will
be dutifully ignored and the driver will start at whatever resolution it
feels like.
CVT is enough different from GTF that it should not be used on monitors
that aren't expecting it. This brings us closer to what the spec says
the correct behaviour is.
Before this it was meaningless to try to mark DisplayModeRec tables
const, since the mode name would be emitted as a pointer to an
anonymous string constant, and therefore would have to be fixed up by
ld.so and so couldn't live in .rodata. With this change the standard
mode lists can live in .rodata, and modes duplicated from them will
have their names filled in on the fly.
FindPCIVideoInfo() function isn't need anymore.
xf86scanpci() is being called only once so we don't need permanent
(static) variables there.
restorePciState() is not used for now (until we find why multiple
cards aren't working).
Formerly the code claimed it could only handle up to 256 visuals, which
was true. Also true, but not explicitly stated, was that it could only
handle visuals with VID < 256. If you have enough screens, and subsystems
that add lots of visuals, you can easily run off the end. (Made worse
because we allocate visual IDs from the same pool as XIDs.) If your app
then chooses a visual > 256, then the Xinerama code would throw BadMatch
on CreateColormap and your app wouldn't start.
With this change, PanoramiXVisualTable is gone. Other subsystems that
were using it as a translation table between each screen's visuals now
use a PanoramiXTranslateVisual() helper.
When an expose event happens on an host GL window paired with an
internal drawable, route that expose event to the clients listening
to the expose event on the internal drawable.
This reverts commit 3abce3ea2b and
6cbaf15e61.
The memory returned to xf86LoadModule was allocated in doLoadModule, which
calls the respective module's PreInit. As it turns out, input and output
drivers store a pointer to the module elswhere, so freeing it in
xf86LoadModule is a bad idea.
For further reference: hw/xfree86/common/xf86Helper.c
Input drivers: xf86InputDriverList[blah]->module = module;
Output drivers: xf86DriverList[blah]->module = module;
Unloading the module would not look pretty then.
Rather than letting the DDX allocate the events, allocate them once in the DIX
and just pass it around when needed.
DDX should call GetEventList() to obtain this list and then pass it into
Get{Pointer|Keyboard}Events.
LoadModule() returns the only reference to a fresh piece of memory (a
ModuleDescPtr). Sadly, xf86LoadModules dropped the return value on the floor
leaking memory for each module it loaded.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
All the failure paths were very diligent in freeing the "fullpath" temporary
string, but the success case was not. All the content only got strdup()d, so
it's not live memory anymore.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
xf86LogInit allocates a piece of memory, stores it in lf. LogInit() will then
effectively strdup it, but lf is never freed again.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
We need to start breaking the XKB API to enforce sanity, so drag whichever
headers we need to do so into the server tree, as the client API is set in
stone, being part of Xlib.
Now resizing it won't produce weir overlaps of the widgets. Thanks to
Pelle Johansson for his help showing me how to do this.
(cherry picked from commit ef3498e92d13c82633fdbe8120396bfbe1e7489a)
After trying to switch from X to VT (or just quit) the video-amd driver
attempts to issue INT 10/0 to go to mode 3 (VGA). The emulator, running
the BIOS code, would then spit out:
c000:0282: A2 ILLEGAL EXTENDED X86 OPCODE!
The opcode was 0F A2, or CPUID; it was not implemented in the emulator.
This simple patch, against 1.3.0.0, handles the CPUID instruction in one of
two ways:
1) if ran on __i386__ or __x86_64__ then it calls the CPUID instruction
directly.
2) if ran elsewhere it returns a canned 486dx4 set of values for
function 1.
This fix allows the video-amd driver to switch back to console mode,
with the GSW BIOS.
Thanks to Symbio Technologies for funding my work, and ThinCan for
providing hardware :)
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Acked-by: Eric Anholt <eric@anholt.net>
'Loading foo' is verbosity 3, whereas 'already built-in' is verbosity 0.
This means that gdm's log would just be full of bare 'module already
built-in' messages.
Also fixed DarwinEQEnqueue to match changes to the callback
And also use dpmsstubs.c rather than copying the code into darwin.c
(cherry picked from commit 4c5c30a4beb7a427b00b18097f548876ad3c11d7)
xf86CrtcRotate() is called by randr 1.2 drivers via xf86CrtcSetMode() or xf86SetDesiredModes()
during ScreenInit() at which point pScrn->pScreen is not set. If a user specifies a rotation
in their config file pScrn->pScreen is dereferenced and boom.
8 bit color still doesn't work, but the -depth command line argument now works properly.
(cherry picked from commit 6765949c27c053d22882f54337cfd09203aa5383)
RISC chips that trap on unaligned loads and stores need to
define __GLX_ALIGN64. This used to get added to the cflags
in the old *.cf files but it no longer does in the modular
X server.
Also, Alpha needs to pass -mieee to the compiler as well.
This is a simple backport of a patch that debian, and probably other
distributions, have been applying forever. To the best of my
knowledge the patch was written by Jurij Smakov. See Debian bug
number #388125.
I just checked and this has been rotting for more than a year in
freedesktop bugzilla as #8392.
Signed-off-by: David S. Miller <davem@davemloft.net>
First mode is _always_ preferred in 1.4; the bit that used to mean this
now means that the preferred mode is also the native pixel format. The
old "is GTF" bit now means "is continuous-frequency" instead.
Section 3.6.4, Table 3.14: Feature Support, Notes 4 and 5.
Nothing actually decoded yet, but at least we print what they are.
New in EDID 1.4:
- Color Management Data (0xF9), Section 3.10.3.7
- CVT 3 Byte Code Descriptor (0xF8), Section 3.10.3.8
- Established Timings III Descriptor (0xF7), section 3.10.3.9
- Manufacturer-specified data tag (0x00 - 0x0F), section 3.10.3.12
I need sleep! Why am I making these stupid mistakes... sorry for pointless commit spam. ugg.
(cherry picked from commit b16351fc6457aabead328472d16dc25789032940)
General code cleanup, whitespace, dead code removal, added missing prototypes.
Made Xquartz come to foreground later in startup, so it doesn't appear for Xquartz -version
(cherry picked from commit 36922e8ff4316c93843aa3fe959cf8df3c7d5892)
(in case we get reports about slow launch times, this will
help clarify what's happening)
(cherry picked from commit 2eea3483cf893f8f81bacd434b31408dfb38cb06)
It's out of date and not included in the build. Instead, xf86DefModeSet.c is
built from vesamodes and extramodes using modeline2c.awk and *that's* what gets
built.
Sorry for the commit spam... I'm tired and was overly quick to commit... forgot to include a neccessary file.
(cherry picked from commit e564b7aeaab63e4c943445275af680b3b5898a94)
Don't hardcode X11.app's path in the launchd plist.
Only install the launchd plist if we --enable-launchd.
(cherry picked from commit 6b74c535dc331d1d621b2541492a3336f69d70a2)
Leaving xpr unflattened since we want modularity to replace that with xpc (XPluginComposite) at some point
(cherry picked from commit 48e6a75fbdd0fee86e364f02ace83f20b312a2b2)
From bugzilla bug 13467¹:
Currently the xserver fails to build without this (now deleted) file, as the
Makefile tries to distribute it. The patch simply removes the reference to
modeline2c.pl.
1] http://bugs.freedesktop.org/show_bug.cgi?id=13467
Signed-off-by: James Cloos <cloos@jhcloos.com>
Don't run VT switches, terminations, or anything, on the core keyboard: only
run actions which affect the keyboard state. If we get an action such as VT
switch, just swallow the event.
Taking out the trash.
We don't need dumpkeymap since we'll be getting keymaps straight from the OS. .Xmodmap should be sufficient for any user-needed changes. If this is not
the case, please let us know, so we can address any problems you have.
fullscreen never worked AFAIK
cr isn't being used and xpr is much better.
(cherry picked from commit e41af2967e885466c4d194fa4c3b358e6be37c30)
This should hopefully eliminate confusion some people have over which X11.app is which.
Now BOTH are in /A/U/X11.app and we intelligently determine whether to execute our app_to_run
or launch the server. If arguments are given, we launch the server. Otherwise if we can
connect to an X DISPLAY, we execute app_to_run. Otherwise, we launch the server.
(cherry picked from commit e7026216ccaa8e4fb073800ba947c9909d4faada)
From bugzilla bug 13467¹:
The modeline2c script is the only part of the Xorg server that requires Perl.
[This] is a simpler replacement that works with any normal AWK.
1] http://bugs.freedesktop.org/show_bug.cgi?id=13467
Bug was posted by Joerg Sonnenberger <joerg@NetBSD.org>.
if X is not the active application.
fixes <rdar://problem/5167664> xeyes dead until window activation
(cherry picked from commit c7573379a85a1480cc51650075078e41dafe56af)
window to another Space, it will work correctly (as opposed
to just leaving a ghost window). We accomplish this by listening
for the notification from Xplugin that our window has been moved,
and then we ask X11 to move the window to the new location.
(cherry picked from commit 2d50ea8013e7c1639d570e227b53b037fb567565)
button 2 click would actually result in a Command-2 chord.
(I.e. it wasn't releasing Command before clicking the fake button.)
(cherry picked from commit 0d5dd5dffa4c5ce3f54dfe53720a39d524dc8e37)
We free the ValuatorClassRec quite regularly. If a SIGIO is handled while
we're swapping device classes, we can bring the server down when we try to
access lastx/lasty of the master device.
window to another Space, it will work correctly (as opposed
to just leaving a ghost window). We accomplish this by listening
for the notification from Xplugin that our window has been moved,
and then we ask X11 to move the window to the new location.
This fixes an undefined symbol error happening when compiling
the server with the --disable-xv configure switch.
Basically, xnest was linking against
@XSERVER_LIBS@ and @XNEST_LIBS@ and the order of the libraries
given to the linker at the end of the process was bogus.
* configure.ac: make XNEST_LIBS contain the $XSERVER_LIBS re-ordered
in such a way that the linker finds the symbols of all the libs contained
in $XNEST_LIBS.
* hw/xnest/Makefile.am: don't link against @XSERVER_LIBS@ anymore because
XNEST_LIBS contains the right thing.
These hints allow an acceleration architecture to optimize allocation of certain
types of pixmaps, such as pixmaps that will serve as backing pixmaps for
redirected windows.
If the originating mode didn't have a name, we would end up with the name of
the original mode being setup correctly, but with the name of the copy still
being NULL.
In a multihead setup, if only the first screen can be
initialized, but the second screen is mentioned first in the
ServerLayout section, the xf86InitOrigins() function will crash
because the screen referred to in the e.g. "RightOf" part is
non-existent.
The transformation between fbdev and xfree86 mode timings needs to be
invertible, otherwise Xen and other framebuffers that don't have real
pixel clocks won't initialize.
This makes the root visual a GLX capable visual again and adds a GLX visual
for the COMPOSITE ARGB visual cleanly (as opposed to the hack we had before).
This changes the module initalization order so that the GLX module initializes
after COMPOSITE. The reason for this change is to be able to initialize a
GLX visual config for the COMPOSITE ARGB visual.
Call ProcessOtherEvents first, then for all keyboard devices let them be
wrapped by XKB. This way all XI events will go through XKB.
Note that the VCK is still not wrapped, so core events will bypass XKB.
(cherry picked from commit d627061b48)
Don't build XF86Misc or XF86Vidmode in hw/xfree86/dixmod when it's been
explicitly disabled in configure, or we don't have the proto modules
installed.
Instead of removing the preference bit marking the hardware declared mode
preference, leave it in place and just move the user preferred mode to the
front of the list while marking it with the USERPREF bit which will cause it
to be selected by the initial mode selection code.
Hide getline call by checking for glibc. If not, use fgetln instead. Even
though this section is now #ifdef'ed for linux only, this should help make
it more portable if non-linux folks end up wanting it.
It contains static paths, fails to build on non-glibc, and apparently just
exists to support distributions managing binary drivers and open-source drivers
together. Also restores previous code for fallback to vesa if nothing is
detected.
Right now we default to "all" which gives us a situation much like before,
but when the "typical" option is implemented, we can change the default and
reduce the number of visuals the GLX module bloats the X server with.
Instead of the fragile setup where we filter the modes common between the
DDX generated GLX visuals and the DRI driver generated fbconfigs, we now
just take the fbconfigs returned by the DRI driver to be our supported set.
A lot of EDID writers apparently end up stuffing centimeters (like the
maximum image size field) into the detailed timings, instead of millimeters.
Some of them only get it wrong in one direction. Also, add a quirk to let
us mark the largest 75hz mode as preferred, which will often be used for
EDID 1.0 CRTs.
If none is present, a default one will be created. This will be attached
to either the first device section in the xorg.conf (allowing you to
specify something like using EXA without having a screen section) or a
default screen section if none is present in the file.
This will allow the screen to not explicitly have a device section. If
this is the case and there is a device section in the xorg.conf, the first
one will be used. If there is no device section at all, a default one will
be created that loads the automatically determined module.
This is what we're currently shipping in Debian. Enables the ability for
drivers to ship a text file listing PCI ID's they support, and have the
server read them on startup when no driver is specified. This works, but
isn't the final solution.
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitScreen): try and detect when the host has no
DRI support. In that case, switch to the -nodri behaviour.
When in the -nodri case, make sure not to skip glx visual
initialisation.
* hw/kdrive/ephyr/ephyrinit.c:
(ddxProcessArgument): disabling visual init here
is bad because it gets disabled even when we want
to use software GL, leading to Xephyr :1 -nodri
crashing in mesa.
We can now launch GL or XV apps in any of the
Xephyr screens we want.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window):
(hostx_create_window): make these functions be screen
number aware.
* hw/kdrive/ephyr/XF86dri.c : fix some compiler warnings.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIQueryDirectRenderingCapable),
(ephyrDRIOpenConnection),
(ephyrDRIAuthConnection),
(ephyrDRICloseConnection),
(ephyrDRIGetClientDriverName),
(ephyrDRICreateContext),
(ephyrDRIDestroyContext),
(ephyrDRICreateDrawable),
(ephyrDRIGetDrawableInfo),
(ephyrDRIGetDeviceInfo): in all those functions, don't forward
the screen number we receive - from the client - to the host X.
We (Xephyr) are always targetting the same X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrdriext.c:
(EphyrMirrorHostVisuals): make this duplicate the visuals of the host X
default screen into a given Xephyr screen. This way we have a chance
to update the visuals of all Xephyr screen to make them mirror those
of the host X.
(many other places): specify screen number where required by the api
change in hostx.h.
* hw/kdrive/ephyr/ephyrglxext.c: specify screen number where required
by the api change in hostx.h
* hw/kdrive/ephyr/ephyrhostglx.c: don't forward the screen number we
receive - from the client - to the host X.
We (Xephyr) are always targetting the same
X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrhostvideo.c,h: take in account the screen number received
from the client app. This is useful to know on which Xephyr screen we
need to display video stuff.
* hw/kdrive/ephyr/ephyrvideo.c: update this to reflect the API change
in hw/kdrive/ephyr/ephyrhostvideo.h.
(ephyrSetPortAttribute): when parameters are not valid
- they exceed their validity range - send them to the host anyway
and do not return an error to clients.
Some host expose buggy validity range, so rejecting client for that
is too harsh.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_has_xshape),
(hostx_has_glx),
(hostx_has_dri): added these new entry points
* hw/kdrive/ephyr/ephyrdriext.c:
(ephyrDRIExtensionInit):
check presence of DRI and XShape extensions before
trying to use them.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrHijackGLXExtension):
check presence of glx extension before we use it.
* hw/kdrive/src/Makefile.am: use fb/fbcmap_mi.c
and not fb/fbcmap.c. This allows kdrive to take advantage of
extensions redefining the entry points of micmap.c stuff.
For instance it allows Xephyr to have a working GL, which is not
possible otherwise, because GL redefines mInitVisualsProc
to initialise its visuals.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): force the back clipping rects
to equal the front clipping rects.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly overclip the clipping rects we
got from the client. This bug fixes a clipping rect that was too
small in height, basically. Also fix a possible mem corruption.
* hw/kdrive/ephyr/hostx.c:
(hostx_set_window_geometry): remove a useless XSync
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitialize): cleanup ephyrDRI extension init.
remove functions that belongs in ephyrdriext.c .
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRICreateDrawable): create the drawable on the host X peer
window, not on the host xephyr main window.
(ephyrDRIGetDrawableInfo): get drawable info of the host X peer
window.
* hw/kdrive/ephyr/ephyrdriext.c: make ephyr DRI extention wrap
a bunch of screen ops so that it can update the host X peer
window whenever DRI bound drawable are moved in Xephyr.
Also code the building blocks of the management of the
host X window peer.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_create_window): added this new entry point
(hostx_destroy_window): ditto
()hostx_set_window_geometry): ditto
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): quickly hook
this into getting the drawable info from the host
X server. For the time being, this only gets the drawable info
of the Xephyr main window in the host. It should really get
the info of a the peer drawable in the host X. So there should be a
peer drawable to begin with.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): some cleanups. Properly get the
the drawable info otherwise there is a host X hang.
* hw/kdrive/ephyr/ephyrhostglx.c: do not
(ephyrHostGLXQueryVersion): do not use C bindings of the glx protocol
calls. Some of those actually access DRI context directly, resulting
in the context having three clients. Instead all XF86DRI proto
fowarding request should be coded by hand and only forward the
protocol requests
* hw/kdrive/ephyr/ephyrglxext.c:
fixed various logging functions
(ephyrGLXGetStringReal): make sure all the string is sent to clients
including the ending zero.
* hw/kdrive/ephyr/ephyrhostglx.c:
(ephyrHostGLXGetStringFromServer): better error handling.
(ephyrHostGLXSendClientInfo): ditto.
(ephyrHostGLXMakeCurrent): ditto
* hw/kdrive/ephyr/ephyr.c:
(EphyrDuplicateVisual): when duplicating the
visual, copy the color component masks and the class
from the hostX
(EphyrMirrorHostVisuals): don't mix blue and green mask.
* hw/kdrive/ephyr/ephyrdri.c: add more logs.
(ephyrDRICreateDrawable): actually implement this.
for the moment it creates a DRI drawable for the hostX window,
no matter what drawable this call was issued for.
(ephyrDRIGetDrawableInfo): actually implemented this.
for the moment the drawable info queried for its attrs is the
Xephyr main main window.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly hook this dispatch
function to the ephyrDRIGetDrawableInfo() function.
* hw/kdrive/ephyr/ephyrglxext.c: add a bunch of GLX implementation hooks
here. Hijack some of the xserver GLX hooks with them. Still need to
properly support byteswapped clients though.
* hw/kdrive/ephyr/ephyrhostglx.c,h: actually implemented the protocol
level forwarding functions used by the GLX entr points in
ephyrglxext.c. Here as well, there are a bunch of them, but we are
far from having implemented all the GLX calls.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window_attributes): added this new entry point
(hostx_allocate_resource_id_peer): added this to keep track of
resource IDs peers: one member of the peer is in Xephyr, the other
is in host X.
(hostx_get_resource_id_peer): ditto.
* hw/kdrive/ephyr/ephyr.c: make Xephyr mirror
the visuals of the host X upon startup. This
is important for GLX client apps.
* hw/kdrive/ephyr/hostx.c,h: add a hostx_get_visuals_info()
to get the visuals of the host X.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrGLXGetFBConfigsSGIX): proxy the GLXGetFBConfigsSGIX call.
It is a vendor extension to get the visual configs as a list of
name/value pairs.
(ephyrHijackGLXExtension): hijack the VendorPriv_dispatch_info
dispatch table to register our implementation of GLXGetFBConfigsSGIX
(ephyrGLXGetFBConfigsSGIXReal): added this where the real
implementation of GLXGetFBConfigsSGIX is. It support bytes swapping.
(ephyrGLXGetFBConfigsSGIX,ephyrGLXGetFBConfigsSGIXSwap): these are
the dispatch entry points. They just call
ephyrGLXGetFBConfigsSGIXReal.
* hw/kdrive/ephyr/ephyrhostglx.c,h: reorganize the proxies to get
visual params from the host so that they clearly support the different
methods of doing so.
* hw/kdrive/ephyr/Makefile.am: add the proxy extension to
ephyr. The proxy extension is an experimental extension that
forwards protocol packets targeted at a given extension to the
host X.
* hw/kdrive/ephyr/ephyr.c: init proxy ext.
* hw/kdrive/ephyr/ephyrhostproxy.c,h: added this new file as part of the
proxy extension.
* hw/kdrive/ephyr/ephyrproxyext.c,h: ditto
* hw/kdrive/ephyr/hostx.c: add the hostx_get_get_extension_info() entry
point.
* hw/kdrive/ephyr/XF86dri.c: re format this correctly.
Make function decls honour the Ansi-C standard.
* hw/kdrive/ephyr/ephyr.c: protect glx/dri related
extension initialisation with the XEPHYR_DRI
macro. Initialize the GLX ext hijacking
at startup.
* hw/kdrive/ephyr/ephyrdri.c: add more logging to ease debugging
* hw/kdrive/ephyr/ephyrdriext.c: ditto. reformat.
* hw/kdrive/ephyr/ephyrglxext.c,h: add this extension to
proxy GLX requests to the host X. started to proxy those nedded to
make glxinfo work with fglrx. Not yet finished.
* hw/kdrive/ephyr/ephyrhostglx.c,h: put here the actual
Xlib code used to hit the host X server because Xlib stuff cannot be
mixed with xserver internal code, otherwise compilation erros due to
type clashes happen. So no Xlib type should be exported by the
entrypoints defined here.
* hw/kdrive/ephyr/ephyrhostvideo.c/h:
(ephyrHostXVStopVideo): add this entry point.
* hw/kdrive/ephyr/ephyrvideo.c:
Basically add ReputImage and StopVideo implementations.
Now, when other windows obscur the video window, the reclipping
seems to be well handled using StopVideo and ReputImage.
To do this, I was obliged to save the frame in PutImage, so
that I could resend it un ReputImage.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivQueryHostAdaptors): properly set
port private luke. This fixes a crash when
the host Xv supports multiple ports.
Make sure number of ports cannot be zero.
* configure.ac,include/dix-config.h.in: define the XEPHYR_DRI macro.
define it when --enable-xephyr and --enable-dri are both turned on.
* hw/kdrive/ephyr/XF86dri.c: copy this from mesa source to enable
Xephyr to talk DRI protocol the host X. In mesa, this is used by libGL.so to
talk DRI protocol with the server.
* hw/kdrive/ephyr/ephyr.c: finally initialise the DRI extension
in the ephyrInitScreen() function.
* hw/kdrive/ephyr/ephyrdri.c,ephyrdriext.c: safeguard the compilation
using the XEPHYR_DRI macro.
* hw/kdrive/ephyr/ephyrdriext.c: added this to implement a DRI extension
into Xephyr. Normally the DRI extension is only present in the
xfree86 server, but I have ported it to Xephyr. The extension calls
functions that declared/defined in ephyrdri.h ephyrdri.c that
forwards the DRI calls to the host X. It does not work yet, as this
entry is just to put the big bricks in place.
* hw/kdrive/ephyr/ephyrdri.c,h: declaration & definition of the
DRI client API that would hit the hostX server.
* hw/kdrive/ephyr/GL/internal/dri_interface.h: added this, otherwise
inclusion of /usr/include/X11/dri/xf86dri.h won't compile
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVPutImage): make this support clipping region.
The clipping region is propagated to host using XSetClipRectangles.
This changes the API of ephyrHostXVPutImage.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrPutImage): propagate the clipping region to the new
ephyrHostXVPutImage() entry point.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrInitVideo) make the EphyrXVPriv object be a
singleton instance, otherwise a new object is created at each
generation.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVAdaptorHasPutVideo): detect if
host X has the PutVideo call.
(ephyrHostXVAdaptorHasPutStill): detect if
host X has the PutStill call
(ephyrHostXVAdaptorHasPutImage): detect if
host X has the PutImage call
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivQueryHostAdaptors): make sure to create
atoms for attribute names otherwise subsequent
calls to get/set attribute from clients won't work.
(ephyrXVPrivSetAdaptorsHooks): don't hardwire advertising
of the PutImage call. Instead, advertise the calls advertised
by the host.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVLogXErrorEvent): add this to
log X error events. Heavily copied from libx11
(ephyrHostXVErrorHandler): new x error handler that
logs the error but does not exits.
(ephyrHostXVInit): add this to be called at the beginning
of xvideo lifetime. It sets an xerror handler that does not
exit.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivIsAttrValueValid): this validates an attribute
value.
(ephyrSetPortAttribute): before setting an attribute,
validate the new value so that we don't send a buggy
request to host X.
* hw/kdrive/ephyr/*.c: fix case in ephyrvideo code.
* hw/kdrive/ephyr/ephyr.c: fix a typo
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(EphyrHostXVPutImage): first implementation. does not
support clipping regions yet.
* hw/kdrive/ephyr/ephyrvideo.c:
(DoSimpleClip): clip using a clipping box. Does not
support regions yet.
(EphyrPutImage): first implementation.
Uses a simple clipping rectangle, no region yet.
* hw/kdrive/ephyr/hostx.c:
(hostx_get_window): added this to get the main
window of the host x.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(EphyrHostXVQueryImageAttributes): add this call. It calls
XvQueryBestSize xserver entry point. It uses the protocol
level machinery because Xvlib does not expose that entry point
as a C function.
(EphyrHostXVQueryBestSize): added this wrapper around XvQueryBestSize().
(EphyrHostGetAtom, EphyrHostGetAtomName): added this to get
an atom or atom name from the host server
* hw/kdrive/ephyr/ephyrvideo.c:
(EphyrSetPortAttribute): convert the atom into an host server
server atom before attacking the host server with it, because in
in its current form, the input atom is only valid in xephyr.
This fix makes this call work.
(EphyrGetPortAttribute): ditto.
(EphyrQueryBestSize): implement this.
(EphyrQueryImageAttributes): implement this.
* hw/kdrive/ephyr/ephyrhostvideo.c:
(EphyrHostXVAdaptorGetVideoFormats): properly get visual class instead of
returning the visual id.
(EphyrHostXVQueryEncodings): properly copy the fields because simple casting does
truncate some fields.
(EphyrHostAttributesDelete): XFree the whole array instead of trying to free invidial members.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrInitVideo): fix a typo
(EphyrXVPrivQueryHostAdaptors): set XvWindowMask mask to adaptors type.
use host adaptor name. Don't forget to set nImages field.
(EphyrXVPrivRegisterAdaptors): report an error when KdXVScreenInit() fails.
Jeremy Huddleston
Alan Coopersmith
Paulo Cesar Pereira de Andrade
Maarten Maathuis
Adam Jackson
Peter Hutterer
Eamon Walsh
Colin Harrison
Joe Krahn
Jon TURNEY
Matthias Hopf
Owen W. Taylor
Robert Noland
Keith Packard
Cooper Yuan
Peter Hutterer
Simon Thum
Benjamin Close
Matthieu Herrb
Timo Aaltonen
Stuart Bennett
Kristian Høgsberg
Jay Cotton
George Staplin
Julien Cristau
Jeremy Uejio
Matthieu Herrb
Stefan Dirsch
Egbert Eich
Rémi Cardona
Michel Dänzer
Ben Byer
Alex Deucher
Adam Jackson
James Cloos
Luc Verhaegen
George Peter Staplin
Egbert Eich
Daniel Stone
Bernhard R. Link
Alan Hourihane
Nathaniel McCallum
Aaron Plattner
Zhenyu Wang
George Staplin
Tiago Vignatti
Dave Airlie
Roland Scheidegger
Eric Anholt
John Tapsell
Thomas Bodzar
Tomas Carnecky
Mathieu Bérard
Ivaylo Boyadzhiev
Xavier Bestel
Dodji Seketeli
Jie Luo
Peter Hutterer
Chris Ball
root
Paul Bender
Jesse Ruffin
Ian Romanick
George Sapountzis
Dan Nicholson
Brad Smith
Brian Rogers
Drew Parsons
Drew Parsons
Ben Byer
Dave Airlie
Kazuhiro Inaoka
Hong Liu
Ross Burton
Jordan Crouse
Ben Byer
Matt Turner
Peter Hutterer
Sascha Hlusiak
Xiang, Haihao
Goneri Le Bouder
David Nusinow
Jeremy Huddleston
Alex Deucher
Jesse Barnes
Donnie Berkholz
Bart Trojanowski
Doug Chapman
Mark Kettenis
Kristian Høgsberg
Dodji Seketeli
Arjan van de Ven
Jeremy Huddleston
Jeremy Huddleston
Bart Trojanowski
liuhong
Benjamin Tissoires
Coleman Kane
Julien Goodwin
Matthieu Herrb
Peter Harris
Richard Purdie
Alex Deucher
Jurij Smakov
David S. Miller
Dave Airlie
Samuel Thibault
Ben Byer
Otavio Salvador
Arkadiusz Miskiewicz
Jeremy Huddleston
Brice Goglin
Andrew Oakley
Adam Jackson
Tormod Volden
Mark Vytlacil
Keith Packard