Xwayland maintains a connection to EI up for 10 minutes after an X11
client has vanished, to avoid going through the connection phase every
time a short lived X11 client comes and goes.
However, if the EI client gets freed (through some other event, e.g. the
user decides to terminate the EI session), Xwayland would still keep the
callback alive and end up trying to free an already freed EI client:
Invalid read of size 4
at 0x4C5E6F9: object_unref (util-object.h:89)
by 0x4C5E6F9: ei_unref (libei.c:77)
by 0x429525: free_ei (xwayland-xtest.c:224)
by 0x429A6E: disconnect_timer_cb (xwayland-xtest.c:404)
by 0x5E63FF: DoTimer (WaitFor.c:276)
by 0x5E6463: DoTimers (WaitFor.c:290)
by 0x5E6164: check_timers (WaitFor.c:133)
by 0x5E61E9: WaitForSomething (WaitFor.c:195)
by 0x4AD50E: Dispatch (dispatch.c:487)
by 0x4BBA0B: dix_main (main.c:272)
by 0x43615D: main (stubmain.c:34)
Address 0x15cc6ee8 is 8 bytes inside a block of size 240 free'd
at 0x48452AC: free (vg_replace_malloc.c:974)
by 0x4C5E729: object_destroy (util-object.h:73)
by 0x4C5E729: object_unref (util-object.h:91)
by 0x4C5E729: ei_unref (libei.c:77)
by 0x429525: free_ei (xwayland-xtest.c:224)
by 0x42A946: xwl_handle_ei_event (xwayland-xtest.c:804)
by 0x5EA977: HandleNotifyFd (connection.c:809)
by 0x5EE8E3: ospoll_wait (ospoll.c:657)
by 0x5E624D: WaitForSomething (WaitFor.c:208)
by 0x4AD50E: Dispatch (dispatch.c:487)
by 0x4BBA0B: dix_main (main.c:272)
by 0x43615D: main (stubmain.c:34)
Block was alloc'd at
at 0x484782C: calloc (vg_replace_malloc.c:1554)
by 0x4C5E777: ei_create (libei.c:73)
by 0x4C5E777: ei_create_context (libei.c:97)
by 0x42994B: setup_ei (xwayland-xtest.c:366)
by 0x42A383: xwayland_xtest_send_events (xwayland-xtest.c:658)
by 0x54ED4C: ProcXTestFakeInput (xtest.c:441)
by 0x54EE56: ProcXTestDispatch (xtest.c:475)
by 0x4AD6E6: Dispatch (dispatch.c:546)
by 0x4BBA0B: dix_main (main.c:272)
by 0x43615D: main (stubmain.c:34)
To avoid that issue, make sure to cancel the timer as soon as a EI
client is freed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
See-also: https://bugzilla.redhat.com/2243076
If we fail to setup EI, give up on using EI for XTEST and restore the
default XTEST handlers.
This happens when neither the portal nor the socket backends are usable.
This does not affect the portal operation though, if the user choose not
to allow a particular client, Xwayland would continue to use EI.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
With EI support wired to XTEST, and oeffis being enabled unconditionally
means that Xwayland will always go through the XDG portal for XTEST when
supported.
While this the intended behavior for the general use case of Xwayland
running rootless on a desktop compositor, that breaks when Xwayland is
running on a nested compositor, because the portal is for the entire
session and not limited to the nested Wayland compositor.
Xwayland itself, as a regular Wayland client, has no way to tell that it
is running on a nested compositor.
So to keep backward compatibility with existing (and also common) use
cases such as nested compositors, best is to disable support for the XDG
portal by default, and add a new command line option "-enable-ei-portal"
for the Wayland compositors (who spawn Xwayland rootless) to explicitly
enable support for the input emulation XDG portal in Xwayland.
A Wayland compositor running nested should not use that command line
option with Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Fixes: a1333342 - xwayland: Add XTEST support using EIS
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1586
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/3047
Some drivers might not support explicit format modifiers. On these
drivers `gbm_bo_create_with_modifiers()` will fail and the
`gbm_bo_create()` code path will be used instead.
In this case, if the LINEAR modifier is advertised (and the INVALID
modifier is not) add the `GBM_BO_USE_LINEAR` flag.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1438
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: José Expósito's avatarJosé Expósito <jexposit@redhat.com>
This can happen if the window has never completed a Present operation.
Fixes: 4230176080 ("xwayland/present: Embed present_vblank_rec in xwl_present_event")
We specify a sensible default geometry for decorated rootful windows,
but not for undecorated ones. Make the default geometry apply to rootful
windows in general.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
While we now have support for resize of the root window through
libdecor, we still ignore toplevel configure dimensions when libdecor is
not in use. This ignores user intent in many Wayland servers, and some
xdg_toplevel states when active have strong requirements for adherence
to configure dimensions.
Resize in response to xdg_toplevel configure dimensions like we do for
libdecor configure events.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
The upcoming handling of plain xdg_toplevel.configure events will need
to use the xwl_window resize helper. Move it outside XWL_HAS_LIBDECOR,
move the remaining dimension logic from handle_libdecor_configure into
it and update the name accordingly.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
When handling libdecor configure, we first update our xwl output and
screen if dimensions differ from the current xwl_screen, and then commit
a new libdecor frame which acknowledges the xdg_surface.configure event.
If the initial configure events contains non-zero dimensions, we will
update the xwl output before acknowledging the initial configure. As we
attach a buffer and commit the surface when updating the output, this
leads to a protocol error.
Instead, move the surface commit till the end of the configure handler
so it always happens after the ack.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Similar to commit 94deed272 - " xwayland: Use sensible defaults for
rootful size", mark fullscreen mode as fixed so that the actual monitor
layout is not reflected in the single fullscreen rootful window.
Without this, if "-fullscreen" is used without "-geometry", the XRandR
configuration is taken from the compositor via wl_output/xdg-output and
cannot be changed by the X11 clients.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Enforce sensible min/max values for the window size when using libdecor.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This is to avoid repeating the same code in two places.
This is essentially a cosmetic change, not a functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Allow passing an optional libdecor configuration pointer to
xwl_window_update_libdecor_size() so that we can reuse it from more than
one place and avoid duplicating that code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The configure handler in libdecor is triggered any time a new
configuration is received.
According to the documentation from libdecor, an application should
respond to that event by creating a suitable libdecor_state, and apply
it using libdecor_frame_commit().
So we ought to attach a new buffer matching the new size and commit
the Wayland surface.
The actual content of the window does not need to be explicitly
repainted, that occurs through the call to SetRootClip():
xwl_output_set_mode_fixed()
-> update_screen_size()
-> SetRootClip()
-> miHandleValidateExposures()
-> miWindowExposures()
-> miPaintWindow()
This fixes an issue with mutter where maximizing a window and then
switching to another window would sometimes resize the Xwayland window
back to its pre-maximized size, or with Weston where the Xwayland window
would initially show up black until the pointer moves to the window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This moves the code which updates the XRandR modes and sets the root
window size to its own function.
This preparation work for the next commit, no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The configure handler for libdecor, namely handle_libdecor_configure(),
is where both the content and the decorations get resized (when needed).
If for any reason, the actual size of the Xwayland screen fails to be
updated, we would still appy the expected size rather than the actual
one for the libdecor state.
To avoid this, use the actual xwl_screen width/height for the libdecor
state.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
For libdecor, we will have to attach a new buffer and commit from two
different handlers (libdecor configure and commit).
Having xwl_window_attach_buffer() separate from xwl_window_post_damage()
is to allow for that.
This commit should not introduce any functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
glamor ensures that a depth 32 pixmap backing a depth 24 window contains
fully opaque alpha channel values for the window's pixels, so we can
allow this without implicit redirection, saving pixmap storage and
intermediate copies.
Second attempt, after fixing a few regressions from the first attempt.
If "-decorate" is used but no "-geometry" is specified, Xwayland rootful
would take its size from the actual Wayland outputs combined.
That is not practical, especially when using multiple outputs, as the
resulting Xwayland window would be much larger than a single monitor.
To avoid that, set a sensible default size for the Xwayland decorate
window, using 640x480 to match what Xephyr does.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
libdecor support seems quite stable, no need to mark that experimental.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
By default, the Xwayland window in rootful mode was not resizable.
Make the Xwayland window resizable using libdecor in rootful mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This is preparation work for making Xwayland rootful resizeable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
glamor ensures that a depth 32 pixmap backing a depth 24 window contains
fully opaque alpha channel values for the window's pixels, so we can
allow this without implicit redirection, saving pixmap storage and
intermediate copies.
This will be needed with the next commit: If a child window completely
obscures a toplevel ancestor of different depth, the child window can
use page flipping only if the depth of the presented pixmap matches that
of the window's backing pixmap, or the former may contain pixel values
which are not suitable for the toplevel window's depth.
With optional EI support in Xwayland, we would route XTEST events to EI
so that they get actually emulated in the Wayland compositor.
However, this implies that EI is actually supported in various places,
including the Wayland compositor of course. If, for whatever reason, we
fail to use EI, the actual XTEST events will be dropped.
That might be seen as a regression, as previously those would go through
the usual X11 processing of events and might have worked with X11 native
clients.
So, to keep backward compatibility, fallback to the plain old XTEST
method if EI is not available or not usable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This adds support for XTEST in Xwayland using EIS, the emulated input
library [1].
To differentiate between X11 clients using XTEST, initiate a EI context
for each client and use the actual client name, from its command
line.
When an X11 client first tries to use XTEST to generate emulated input
events, a new connection to libEI is initiated by Xwayland on behalf
of the X11 client.
During that connection phase, the EI server will not be accepting
events until the emulated device is actually created, meaning that any
XTEST request from the X11 client will be discarded until the EI server
is willing to accept events.
To avoid that issue, add an event queue in Xwayland per X11 client that
will keep those requests, and dequeue them as soon as the EI server is
ready, i.e. once the EI device is added.
If the X11 client disconnects from the Xserver before the EI server is
ready, or if the connection is closed by the EI server, those events are
discarded and the queue cleared from any pending events.
For 10 minutes after the client disconnects, keep the internal struct
alive. If a client with the same commandline arguments connects again,
re-use the same struct. This means we are faster with the events the
second time around but it also allows the EIS server to pause individual
clients that keep sending intermittent events and disconnect immediately
(e.g. it'd be possible to pause xdtotool while an authentication prompt
is active).
[1] https://gitlab.freedesktop.org/libinput/libei
Thanks to Jan Beich <jbeich@FreeBSD.org> for fixing the build on BSD.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Co-authored-by: Olivier Fourdan <ofourdan@redhat.com>
Co-authored-by: David Redondo <kde@david-redondo.de>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This allows manual handling of IdleAction and IdleHint rather than automatically
calling the IdleAction every IdleSecs, due to inactivity on the underlying tty.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1194
Signed-off-by: aarondill <aaronsacks2006@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Nothing should be relying on this anymore, so use a counter like other
places in the tree instead. This ensures that the event_id doesn't get
cast back into a pointer again in future, and also may be slightly less
confusing in cases where calloc reuses an address as debug logs would
show the same event_id for those but now they will be distinct.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
On traditional 32-bit and 64-bit architectures, uint64_t can be abused
to hold a uintptr_t and be cast back to a valid pointer. However, on
CHERI, and thus Arm's Morello prototype, pointers are capabilities,
which contain a traditional address alongside additional metadata,
including a tag bit that ensures it cannot be forged (the only way to
get a capability with the tag bit set is by using instructions that take
in another valid capability with sufficient bounds/permissions/etc for
the request, and any other operation, like overwriting individual bytes
in memory, will give a capability whose tag is clear). Casting a pointer
to a uintptr_t is fine as uintptr_t is represented as a capability, but
casting to a uint64_t yields just the address, losing the metadata and
tag. Thus, when cast back to a uintptr_t, the capability remains invalid
and faults on any attempt to dereference.
As with various other places in the tree, address this by searching for
the pointer in a list so that we no longer rely on this undefined
behaviour.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
All these arguments other than damage come from the vblank itself so
passing the vblank simplifies the caller. Moreover, we pass the event_id
solely so we can get back to the event, which is just the (extended)
vblank, so passing the vblank avoids that round trip.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
By adding a new xwl_present_event_from_vblank function we can avoid
turning the vblank into an event_id, and also abstract away the exact
encoding for event_id from most places.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
The current code, as changed by commit ad2d461de „Do not round
non-standard modes“ is reported to be logically incongruent.
We should either drop libxcvt entirely or simply fix the size, keeping
the CVT timings unchanged.
For backward compatibility and simplicity, I'd rather simply fix the
hdisplay/vdisplay to match the given size.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: ad2d461de - xwayland: Do not round non-standard modes
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1549
Commit ad2d461de „xwayland: Do not round non-standard mode“ introduced a
spelling error in the names of the local functions.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: ad2d461de - xwayland: Do not round non-standard modes
ki->name has already initialized in KdNewKeyboard() with strdup().
But initialized in KdParseKeyboard() again.
Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Now that our CVT function is able to deal with non-standard modes, we
can safely use it for the fixed mode as well.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland uses libxcvt to generate the mode info and then
passes that to RRModeGet() to generate a RRMode.
However, libxcvt may round down the width to match the horizontal
granularity (8), and that's a problem when the Wayland compositor is
running a non-standard size (like, e.g. running nested with a custom
size) because XRandR would report a width smaller than the actual size.
To avoid that, check whether the CVT computed size differs from the
expected size, and fallback to a simpler computation not doing any
rounding if that's the case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1540
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Compositors may use XWAYLAND_ALLOW_COMMITS to communicate when Xwayland
may or may not commit new buffers to a wl_surface. If commits are
denied, then later allowed, we'll only get a buffer attached if there is
actual damage posted, which might be long after.
This fixes an issue where the window manager would reparent a window
while denying commits, then after reparenting, allow commits. The window
in question belonged to a game and took several seconds produce the next
frame, resulting in an empty window appearing as if it had just
disappeared.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
If the format and modifiers are from a tranche which supports scanout,
we can set the corresponding flag to gbm_bo_create_with_modifiers2() to
benefit from scanout buffers where applicable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add a new API similar to xwl_glamor_get_drawable_modifiers() but also
returning whether the format and modifiers are from a tranche which
supports scanout.
This is preparation work for adding scanout support with
gbm_bo_create_with_modifiers2() when supported.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This allows us to pass flags to the function, avoiding the forced
implicit GBM_BO_USE_SCANOUT which happens with the older version.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The present code in Xwayland cannot be used without GBM, so if GBM is
not available (or too old), the build would fail.
Make sure we do not use the present code without GBM support.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The Wayland library may log warnings, we do not need to make that fatal
to the Xserver.
By killing the Xserver whenever a warning is raised, we hide other log
messages that might be also interesting.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Whenever the linux-dmabuf v4 feedback changes, we need to recreate the
existing buffers so they use the current linux-dmabuf v4 feedback.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When creating the window buffer's backing pixmap, try the Xwayland
glamor hook first and fallback to the regular CreatePixmap() code path
otherwise.
That allows to enable direct scanout if possible, either through the
regular dmabuf v4 code path, or from the implicit fallback code path.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Before linux_dmabuf v4 support was added, the BO were created using
gbm_bo_create_with_modifiers() which incidentally creates scanout
capable buffers.
We now need to replicate that explicitly when using the fallback path,
with buffers window, otherwise direct scanout will not be possible in
that case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1535
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add the implementation for create_pixmap_for_window() in the GBM glamor
backend.
To do so, we just rename the existing xwl_glamor_gbm_create_pixmap() as
internal and add an optional drawable parameter, so that it can be used
either from the regular CreatePixmap code path, or from the new direct
Xwayland glamor's hook.
v2: Fallback to xwl_glamor_get_modifiers() if
xwl_glamor_get_drawable_modifiers() returned 0 modifiers. (Michel)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
With linux dmabuf v4 support, for direct scanout support, we need more
context that just what CreatePixmap() provides, as we need the actual
drawable to invoke xwl_glamor_get_drawable_modifiers().
Add a specific hook in Xwayland's glamor implementation that we can use
for that purpose.
This is preparation work for the direct scanout fixes.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
With implicit modifiers, DRM_FORMAT_MOD_INVALID is an allowed modifier,
to indicate that the server can support the format.
When looking for a scanout capable tranche with implicit modifiers, we
ought to check for the availability of a tranche with an invalid
modifier for the given format.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The helper function xwl_feedback_is_modifier_supported() walks all the
formats of a feeedback tranche and checks for format/modifier support
availability.
Add scanout support to that so that a caller can easily restrict the
tranches to those which support scanout.
This is preparation work for the implicit scanout support, no functional
change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Separate the callbacks for the default's feedback from the one for
regular windows.
This is preparation work to recreate the window buffer of feedback
updates, no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
It could happen with the following call path:
frame_callback
xwl_present_frame_callback
xwl_present_msc_bump
xwl_present_execute
xwl_present_flip
xwl_window_create_frame_callback
The nested loop called xwl_present_reset_timer, which may end up calling
xorg_list_del for the entry after the one frame_callback started the
chain for. This resulted in the outer loop never terminating, because
its next element wasn't hooked up to the list anymore.
We avoid this by calling xwl_present_reset_timer as needed in
frame_callback, and bailing from xwl_window_create_frame_callback if it
was called from the former.
We also catch nested calls and FatalError if they ever happen again due
to another bug.
v2:
* Leave xwl_present_reset_timer call in xwl_present_frame_callback,
needed if xwl_present_msc_bump didn't hook up the window to the frame
callback list again.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1442
Commit 3c07a01c4 (xwayland: Use xdg-output name for XRandR) changed the
logic to use a fixed sized buffer allocated on the stack to pass to
RROutputCreate() which would then copy it.
Valgrind complains about this:
== Conditional jump or move depends on uninitialised value(s)
== at 0x49954B: MakeAtom (atom.c:87)
== by 0x5108B3: RRMonitorCrtcName (rrmonitor.c:33)
== by 0x510BBB: RRMonitorSetFromServer (rrmonitor.c:92)
== by 0x511882: RRMonitorMakeList (rrmonitor.c:373)
== by 0x512175: ProcRRGetMonitors (rrmonitor.c:634)
== by 0x508091: ProcRRDispatch (randr.c:748)
== by 0x4A860E: Dispatch (dispatch.c:546)
== by 0x4B692F: dix_main (main.c:271)
== by 0x431C90: main (stubmain.c:34)
== Uninitialised value was created by a stack allocation
== at 0x42122C: xwl_output_create (xwayland-output.c:816)
This is actually harmless, but also simple to avoid by just initializing
the content of the array with zeros, so let's just fix that.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: commit 3c07a01c4 - xwayland: Use xdg-output name for XRandR
If we allocated with implicit modifiers, then we shouldn't use the
modifier returned by gbm_bo when checking whether the modifier is
supported or not, since it won't be if the compositor only advertises
implicit modifiers, nor should we use the modifier when creating the
Wayland buffer object, as it wasn't explicitly advertised.
Fixes: c6f2598a4 ("xwayland: don't fall back to wl_drm with explicit modifier")
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
If we're using implicit modifiers, we'll pass NULL and zero modifiers.
Lets just use the legacy API directly instead.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
The linux_dmabuf_v1 protocol doesn't guarantee any DRM node type:
the compositor may send a primary node or a render node. Use
drmDevice so that device comparisons are node-type-insensitive.
Signed-off-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1447
With wl_pointer.axis_v120 support, the wl_seat supported version has
been bumped to 8, but Xwayland is still using MAP_SHARED which is
prohibited, wl_seat version 7 and above enforces the use of MAP_PRIVATE
for keymaps.
Use MAP_PRIVATE for the keymaps mmap().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1512
Fixes: 3a02f56b4 - hook up wl_pointer.axis_v120 events
It's incorrect to strip an explicit modifier. Daniels' docs [1]
states:
> when importing a buffer, the user may supply `DRM_FORMAT_MOD_INVALID` as the
> buffer modifier (or not supply a modifier) to indicate that the modifier is
> unknown for whatever reason; this is only acceptable when the buffer has
> not been allocated with an explicit modifier
[1]: https://lore.kernel.org/dri-devel/20210905122742.86029-1-daniels@collabora.com/
Signed-off-by: Simon Ser <contact@emersion.fr>
When the modifier is not supported by the compositor, and the
DMA-BUF contains multiple planes, xwl_pixmap->buffer is NULL.
Avoid crashing when calling wl_buffer_add_listener().
Signed-off-by: Simon Ser <contact@emersion.fr>
With the addition of linux_dmabuf v4, the code adds dev_t in various
places but did not include <sys/types.h>.
While that works on glibc, it may fail to build on other libc
implementations such as musl libc.
Make sure to explicitly include <sys/types.h> where we use dev_t.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1445
Fixes: bddfe190de - Implement linux_dmabuf_feedback event handlers
When using TearFree, DRI clients have no way of accurately knowing when
their copied pixmaps appear on the display without utilizing the kernel
driver's notification indicating that the TearFree flip containing their
pixmap is complete. This is because the target CRTC's MSC can change while
the predicted completion MSC is calculated and even while the page flip
IOCTL is sent to the kernel due to scheduling delays and/or unfortunate
timing. Even worse, a page flip isn't actually guaranteed to be finished
after one vblank; it may be several MSCs until a flip actually finishes
depending on delays and load in hardware.
As a result, DRI clients may be off by one or more MSCs when they naively
expect their pixmaps to be visible at MSC+1 with TearFree enabled. This,
for example, makes it impossible for DRI clients to achieve precise A/V
synchronization when TearFree is enabled.
This change therefore adds a way for DRI clients to receive a notification
straight from the TearFree flip-done handler to know exactly when their
pixmaps appear on the display. This is done by checking for a NULL pixmap
pointer to modesetting's DRI flip routine, which indicates that the DRI
client has copied its pixmap and wants TearFree to send a notification when
the copied pixmap appears on the display as part of a TearFree flip. The
existing PageFlip scaffolding is reused to achieve this with minimal churn.
The Present extension will be updated in an upcoming change to utilize this
new mechanism for DRI clients' presentations.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
It is possible for vblank events to run out of order with respect to one
another because the event which was queued to the kernel has the privilege
of running before all other events are handled. This allows kernel-queued
events to run before other, older events which should've run first.
Although this isn't a huge problem now, it will become more problematic
after the next change which ties DRI client notifications to TearFree page
flips. This increases the likelihood of DRI clients erroneously receiving
presentation-completion notifications out of order; i.e., a client could
receive a notification for a newer pixmap it submitted *before* receiving a
notification for an older pixmap.
Ensure vblank events always run in sequential order by removing the bias
towards kernel-queued events, and therefore forcing them to run at their
sequential position in the queue like other events.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
There is more than one place with the confusing TearFree state check for a
CRTC. Instead of open-coding the TearFree check everywhere, introduce a
helper, ms_tearfree_is_active_on_crtc, to cover the TearFree state checks.
Suggested-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Check that the VT is owned and that the CRTC is on before exporting info to
Present stating that TearFree is available. Also, since `trf->buf[0].px` is
checked, the `ms->drmmode.tearfree_enable` check is redundant and can
therefore be removed.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The event allocation for ms_do_pageflip is leaked on error because callers
of ms_do_pageflip have no way of knowing whether or not a page flip
succeeded for any CRTCs. If a page flip succeeded for at least one CRTC,
then it's not safe for the caller to free the event allocation, and the
allocation won't be leaked. The event allocation is only leaked when not a
single CRTC's page flip succeeded.
Since all callers of ms_do_pageflip allocate the event pointer, and all of
them intentionally leak the event allocation when ms_do_pageflip returns an
error, just free the event pointer inside ms_do_pageflip when a page flip
doesn't succeed for any CRTC.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The CRTC pointer will soon be needed in the TearFree flip handlers, so pass
it in instead of passing in drmmode_tearfree_ptr.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Rather than passing the reference CRTC's vblank pipe to ms_do_pageflip,
just pass the pointer to the reference CRTC directly instead. This is
clearer and more useful than the vblank pipe, since the vblank pipe is only
used to identify whether or not a given CRTC is the reference CRTC.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This #ifdef is redundant since ms_do_pageflip is already enclosed within a
larger GLAMOR_HAS_GBM #ifdef.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This moves lnx_platform.c to the shared directory and adds it to
the BSD build. This is needed for PRIME render offload.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This allows developers to setup Xwayland as a subproject of a
Wayland compositor, and have it correctly pick up the features
advertised in the dependency variables.
Signed-off-by: Simon Ser <contact@emersion.fr>
Remove the xwayland.pc.in file:
- This avoids writing down each pkg-config variable twice: once in
the Meson files to set the configuration data, once in the .pc.in
file to print it.
- We'll be able to re-use the same variables for use as a
subproject.
Signed-off-by: Simon Ser <contact@emersion.fr>
If wl_output provides us with an output name, use that as well.
If we have both xdg_output.name and wl_output.name (from version >= 4),
prefer the latter.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>#
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/189
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
With the wl_output protocol, the actual bind to the interface is done in
xwl_output_create().
Pass the version number from the registry so we can bind to the minimum
version.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland assigns sequential output names for XRandR. When an
output is hotplugged, a new name is assigned sequentially (XWAYLAND0,
XWAYLAND1, etc.). This is a problem because if a monitor is unplugged
and plugged again, it will get a new name each time.
Luckily, xdg-output provides us with a name for the outputs.
Even though the protocol states that the name is not a reflection of the
underlying DRM connector name, it is to remain consistent across
sessions with the same hardware and software configuration.
So we could use the xdg-output name for the XRandR reported name for the
output.
Doing so is a bit tricky though, because the output name is set at
creation and is not supposed to change. The xdg-output event that
provides us with the name will come at a later time.
So we just allocate a default fixed size for the output name at creation
and just replace the default output name with the xdg-output name when
that is known.
Also, historically, some X11 clients were expecting output names in
Xwayland to be named XWAYLAND<x> and used that to check whether they
were running on Xwayland. Those clients should now use the Xwayland X11
extension which is designed specifically for that purpose.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1353
See-also: https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/954
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Since commit 204f10c2, we notify XRandR clients that the randr
configuration has changes as soon as an new output is created.
Yet, this might be premature, considering that at that point, we are
still to receive the wl_output and xdg-output events that will most
likely change the setup.
So instead of calling RRTellChanged() from xwl_output_create(), wait
until we get to call apply_output_change(), which occurs after the done
events from both xdg-output and wl_output are received.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Some drivers (e.g. AMD GFX8-) don't support explicit format
modifiers. On these drivers, gbm_bo_create_with_modifiers()
will fail. This results in "Error getting buffer" in the logs
later on with all X11 windows staying invisible.
Fallback to the modifier-less API gbm_bo_create() in that case.
Signed-off-by: Simon Ser <contact@emersion.fr>
The window might be retained in the damage list after
`xwl_screen_post_damage` in certain conditions. This means we need to
check if the window is already in the list to avoid adding the same
window twice which will lead to list corruption resulting in server freeze
in `xwl_screen_post_damage`.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
With Wayland 1.21 being our baseline, we do not need to compile
wl_pointer.axis_v120 conditionally.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
With libdecor, when the state changes (in the configure handler), we
need to commit the libdecor frame but also the wl_surface, otherwise
the surface is left in a uncommitted state until a wl_surface commit
eventually occurs later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: c74c6add3e - xwayland: add optional support for libdecor
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If the dmabuf protocol's feedback object gave us a new list of
modifiers, send PresentCompleteModeSuboptimalCopy to the client
to inform them that they need to call GetSupportedModifiers.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This adds to xwl_glamor_is_modifier_supported, where if feedback
is in use we will check that the format/mod is allowed in any
device advertised by the compositor.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Move dev_formats declaration to where it's used in
xwl_feedback_is_modifier_supported
* Add curly braces around multi-line statement in
xwl_glamor_is_modifier_supported ]
If protocol version 4 of linux_dmabuf is in use, then the compositor
may not return anything with the modifiers event. We instead
will return the formats/mods reported for the main device.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Move main_dev declaration to where it's used in
xwl_glamor_get_formats
* Add empty line between variable declaration and comment ]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Sort protocol #includes lexically.
* memcpy to &xwl_feedback->main_dev directly in
xwl_dmabuf_feedback_main_device. ]
This creates xwl_add_format_and_mod_to_list, which is a helper
that adds a format/mod combo to a xwl_format* list. This will
be used by both the modifier event handling and the tranche
format handling.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
There are systems where softpipe is the default renderer,
e.g. when llvmpipe is not is not available. Using glamor
on such systems is never a good idea.
This mirrors what commit 0a9415cf79
did for llvmpipe.
Closes: #1417
Signed-off-by: Ivan A. Melnikov <iv@altlinux.org>
For details on the protocol itself see the Wayland merge request:
https://gitlab.freedesktop.org/wayland/wayland/-/merge_requests/72
The v120 event has a value base of 120, so one wheel detent is 120, half a
wheel is 60, etc. This is the API Windows has been using since Vista but it
requires HW support from the device. Logitech mice and many Microsoft mice of
the last decade or so have support and it's enabled in the kernel since v5.0.
The new events replace wl_pointer.axis_discrete events, once you bind to
wl_pointer >= 8 you only get the v120 events. So backwards compatibility
is simple, we just multiply the discrete events if we get them and
treat everything as 120 event internally.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Leasable displays do not have any actual associated Wayland output and
are not available to regular X11 clients and left entirely to the
application who requests the lease.
As these are not actually managed by the Wayland compositor and left
entirely to the "lessee" application, the viewporter protocol required
for the XRandR emulation is not usable on such devices.
We should therefore not advertise the XRandR emulated modes for those
leasable displays.
This also solves a problem with implementations of glXGetMscRateOML()
which is used notably by Chromium/Electron. Applications using this
which will begin lagging/stuttering exponentially over
time, trying to look up a non-existent mode with 0x0 as returned by
XF86VidModeGetModeLine() with XRandR emulation for such devices.
See-also: https://github.com/labwc/labwc/issues/553
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Make sure info->active and info->vt_active are false after
dropping drm master.
Normally, this is done when pausing the first input device, so it
breaks when there are no input device at all.
Fixes: da9d012a9 ("xf86/logind: Fix drm_drop_master before vt_reldisp")
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1387
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
The X server swapping code is a huge attack surface, much of this code
is untested and prone to security issues. The use-case of byte-swapped
clients is very niche, so let's disable this by default and allow it
only when the respective config option or commandline flag is given.
For Xorg, this adds the ServerFlag "AllowByteSwappedClients" "on".
For all DDX, this adds the commandline options +byteswappedclients and
-byteswappedclients to enable or disable, respectively.
Fixes#1201https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1029
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 5145742fb6 accidentally bumped the videodrv ABI version from 26.0
to 26.6 in one go.
Change it back to 26.1 as per the documented process for minor additions.
Fixes: 5145742fb6 - randr: introduce rrCrtcGetInfo DDX function
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This fixes an issue with GLFW-based games failing to set the resolution
when the user request to switch back to the native display mode.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This allows rrCrtcGetInfo to override the values in the XRRCrtcGetInfo
reply. One use case is to allow Xwayland to return the current emulated
mode for the specific client instead of the global mode.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Implements the xwayland_shell protocol which makes the surface
association happen via a shared serial, rather than sharing a wl_surface
resource ID across an X atom.
This solves a race that can happen if the wl_surface
associated with a WL_SURFACE_ID for a window was destroyed before the
update of the atom was processed by the compositor and another surface
(or other object) had taken its id due to recycling.
Closes: #1157
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
If atomic modesetting is to be enabled in the configuration file, log
whether this is supported and eventually enabled or disabled.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The modesetting driver has atomic modesetting disabled by default but
can be enabled (if supported) using a configuration option.
Add this option in the man page.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This adds support for TearFree page flips to eliminate tearing without the
use of a compositor. It allocates two shadow buffers for each CRTC, a back
buffer and a front buffer, and uses damage tracking to minimize excessive
copying between buffers and skip unnecessary flips when the screen's
contents remain unchanged. It works on transformed screens too, such as
rotated and scaled CRTCs.
When PageFlip is enabled, TearFree won't force fullscreen DRI clients to
synchronize their page flips to the vblank interval.
TearFree is disabled by default.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
The DRM event queue in the kernel is quite small and can be easily
exhausted by DRI clients. When the event queue is full, that means nothing
can be queued onto it anymore, which can lead to incorrect presentation
times for DRI clients and failure when attempting to queue a page flip.
To make matters worse, once an event is placed onto the kernel's event
queue, there's no straightforward way to prematurely remove it from the
kernel's event queue in userspace, which means that aborting a sequence
number doesn't free up space in the event queue.
Since vblank events from DRI clients are the largest consumers of the
event queue, and since it's often easy to know the desired target MSC of
their vblank events without querying the kernel for a CRTC's current MSC,
we can coalesce vblank events occurring at the same MSC such that only one
of them is placed onto the kernel's event queue, instead of allowing
duplicate vblank events to pollute the event queue.
This is achieved by tracking the next kernel-queued event's MSC on a
per-CRTC basis and then running all of that CRTC's vblank event handlers
which have reached their target MSC when the queued MSC is signaled.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
do_queue_flip_on_crtc() is about to be used to flip buffers other than the
primary scanout (`ms->drmmode.fb_id`), so make it generic to accept any
frame buffer ID, as well as x and y coordinates in the frame buffer, to
flip on a given CRTC. Move the retry logic from queue_flip_on_crtc() into
it as well, so that it's robust for all callers.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Shadow buffers are about to be used for TearFree, so make the shadow buffer
helpers generic such that they can be used to create arbitrary per-CRTC
shadows aside from just the per-CRTC rotated buffer.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
xf86RotateCrtcRedisplay() is about to be used outside of xf86Rotate.c in
order to copy transformed pixmaps, so fix up its interface by specifying
the source drawable and destination pixmap rather than assuming the root
drawable and rotated pixmap, respectively. In addition, add an argument to
make xf86RotateCrtcRedisplay() not perform any transformations, which is an
indicator that it should only copy a transformed pixmap rather than
actually transform a pixmap.
These changes make it possible to use xf86RotateCrtcRedisplay() to not
only copy transformed pixmaps, but also actually transform pixmaps, making
it very useful outside of xf86Rotate.c.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Updated the for-loop that iterates over the received EGLConfigs to
include the very first EGLConfig with index 0.
Signed-off-by: Doğukan Korkmaztürk <dkorkmazturk@nvidia.com>
Fixes: 8469241592 - xwayland: Add EGL-backed GLX provider
The virgl driver exposes the name of the host renderer which might be llvmpipe.
In this case we still need glamor to be initialized.
Only check if the renderer starts with llvmpipe (which is what llvmpipe exposes).
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The current X server infrastructure sets modesetting driver as default driver
to handle PCI-hotplug of a GPU device. This prevents the respective DDX driver
(like AMDGPU DDX driver) to take control of the card.
This patch:
- Adds a few functions and fine-tunes the GPU hotplug infrastructure to allow
the DDX driver to be loaded, if it is configured in the X config file
options as "hotplug-driver".
- Scans and updates the PCI device list before adding the new GPU device
in platform, so that the association of the platform device and PCI device
is in place (dev->pdev).
- Adds documentation of this new option
An example usage in the config file would look like:
Section "OutputClass"
Identifier "AMDgpu"
MatchDriver "amdgpu"
Driver "amdgpu"
HotplugDriver "amdgpu"
EndSection
V2:
Fixed typo in commit message (Martin)
Added R-B from Adam.
Added ACK from Alex and Martin.
V3:
Added an output class based approach for finding the DDX driver (Aaron)
Rebase
V4:
Addressed review comment from Aaron:
GPU hot-plug handling driver's name to be read from the DDX config file options.
In this way only the DDX drivers interested in handling GPU hot-plug will be
picked and loaded, for others modesetting driver will be used as usual.
V5:
Addressed review comments from Aaron:
- X config option to be listed in CamelCase.
- Indentation fix at one place.
- Code readability related optimization.
V6:
Addressed review comments from Aaron:
- Squash the doc in the same patch
- Doc formatting changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Aaron Plattner aplattner@nvidia.com (v3)
Acked-by: Martin Roukala martin.roukala@mupuf.org(v1)
Acked-by: Alex Deucher alexander.deucher@amd.com (v1)
Reviewed-by: Adam Jackson ajax@redhat.com(v1)
Signed-off-by: Shashank Sharma shashank.sharma@amd.com
Current error:
ld: error: undefined symbol: xf86EnableIO
>>> referenced by xf86Configure.c
>>> libxorg_common.a.p/xf86Configure.c.o:(DoConfigure) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Events.c
>>> libxorg_common.a.p/xf86Events.c.o:(xf86VTEnter) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Init.c
>>> libxorg_common.a.p/xf86Init.c.o:(InitOutput) in archive hw/xfree86/common/libxorg_common.a
>>> referenced 1 more times
Commit 8a5f3ddb2 ("set tag on our surface") introduced the use of tags
to differentiate our own surfaces, and commit a1d14aa8c ("Clear the
"xwl-window" tag on unrealize") removed the tags before the surfaces are
actually destroyed.
Xwayland would then rely on these tags on the surface to decide whether
to ignore or to process the Wayland event in various places.
However, in doing so, it also checked for the tag on keyboard leave
events.
As a result, if the keyboard leave events is received after the X11
window is unrealized, keyboard_handle_leave() would not queue the
LeaveNotify events for the DIX to proceed, and the key repeat would
kick in and repeat the key event indefinitely.
To avoid the issue, process events regardless of the tag as before
in keyboard_handle_leave().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 8a5f3ddb2 - "xwayland: set tag on our surface"
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1395
Tested-by: Renan Guilherme Lebre Ramos <japareaggae@gmail.com>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Multiplanar GBM buffers can point to different objects from each plane.
Use the _for_plane API when possible to retrieve the correct prime FD
for each plane.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Guido Günther <agx@sigxcpu.org>
Check the fd for validity before giving a success return code.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Guido Günther <agx@sigxcpu.org>
Now that we keep the Wayland surface around for longer than the
xwl_window, we might get events for that surface after the X11 window
is unrealized.
Make sure we untag the Wayland surface when the Wayland surface is
delayed, to break the wl_surface/xwl_window relationship, so that events
for that surface are discarded by Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: e37f18ee9 - xwayland: Delay wl_surface destruction
a77d95af61 intended to do this, but the
check for “is this rootless or rootful XWayland” was inverted.
Fixes: a77d95af61 ("xwayland: Prevent Xserver grabs with rootless")
Signed-off-by: Demi Marie Obenour <demiobenour@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
hw/xwayland/xwayland.c:306:10: fatal error: 'X11/extensions/xwaylandproto.h' file not found
#include <X11/extensions/xwaylandproto.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 2700bc6045 ("xwayland: add support for the XWAYLAND extension")
X11 and Wayland requests are unordered, causing a race in the X11 window
and wl_surface association.
To mitigate that race, delay the wl_surface destruction by 1 second,
so that the compositor has time to establish the association before the
wl_surface is destroyed: to see both the wl_surface created and the
WL_SURFACE_ID X11 property set.
This is only a mitigation though, a more robust solution requires a
future dedicated Wayland protocol.
v2: Clean up pending wl_surface destroy on exit as well.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1157
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Joshua Ashton <joshua@froggi.es>
Tested-by: Sterophonick <sterophonick@gmail.com>
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/163
Changes check for trying modesetting driver from if defined(__linux__)
to use meson check for if we built the driver for this platform.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Because of the design of most Wayland compositors, where the compositor
is both a Wayland server and an X11 window manager, any X11 client
issuing a server grab (i.e. XGrabServer()) can possibly hang the whole
desktop when Xwayland is running rootless.
This can happen with e.g. ImageMagick's import command with mutter.
1. "import" is launched and issues an XServerGrab(),
2. Xwayland restricts access to that "import" X11 client alone,
3. mutter continues to process events until it needs to sync with
Xwayland (there's variability in time before the hang occurs),
4. When mutter does an XSync() (explicitly or implicitly through some
other Xlib call), it will stop waiting for Xwayland to reply,
5. Xwayland waits for the XServerGrab() to be released by import,
6. "import" waits for a user input to release the XServerGrab(),
7. mutter is stuck waiting on Xwayland and does not process input
events...
To prevent this, re-route the GrabServer/UngrabServer requests and
pretend the grab works but actually does nothing at all for all clients
but the X11 window manager (which can still issue X11 server grabs, at
its own risks).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://bugzilla.redhat.com/1914021
I wanted to simplify the logic, and thought this is a good opportunity
to eliminate local diffs.
I don't want to list OSes without wsfb, because I understand that is a
netbsd/openbsd driver, and always have it as a fallback for us.
Additionally, I understand "fbdev" is linux-specific, so have the logic
match this intent.
Fixes accidentally taking the WL_POINTER_AXIS_HORIZONTAL_SCROLL case as
well after the WL_POINTER_AXIS_VERTICAL_SCROLL case, which resulted in
vertical wheel events triggering both vertical and horizontal scrolling.
Fixes: e37eeb7af2 ("xwayland: Aggregate scroll axis events to fix kinetic scrolling")
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1367
This extension exists to serve one purpose: reliably identifying
Xwayland. Previous attempts at doing so included querying root window
properties, output names or input device names. All these attempts are
somewhat unreliable. Instead, let's use an extension - where that
extension is present we have an Xwayland server.
Clients should never need to do anything but check whether the extension
exists through XQueryExtension or search through XListExtensions.
This extension provides a single QueryVersion request only, and
that is only to provide future compatibility if we ever need anything
other than "this extension exists" functionality.
https://gitlab.freedesktop.org/xorg/proto/xorgproto/-/merge_requests/54
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not that it actually matters since the typedef is int32_t anyway, but
this theoretically avoids an erroneous call to wl_fixed_to_double() on
that value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 7cdcdfea0 introduced a new command line option
"-force-xrandr-emulation", however it is missing from the
ddxProcessArgument().
As a result, trying to use that command option would result in a error:
(EE) Unrecognized option: -force-xrandr-emulation
Make sure "-force-xrandr-emulation" is accounted for in Xwayland's
ddxProcessArgument().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 7cdcdfea0 - xwayland: Add -force-xrandr-emulation switch
Pointer scroll events are collected in xwl_seat->pending_pointer_event
as they are received in the pointer_handle_axis and
pointer_handle_axis_discrete callbacks. They are dispatched together as a
single event when pointer_handle_frame is called which "Indicates the end of a
set of events that logically belong together" [1]. This patch also sends an
event with dx=0, dy=0 when pointer_handle_axis_stop is called, which is what
allows XWayland clients to recognise the end of a touchpad scroll.
[1] https://wayland.app/protocols/wayland#wl_pointer:event:frame
Signed-off-by: David Jacewicz <david.jacewicz27@protonmail.com>
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/926
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When running rootful, the Xwayland window is not decorated (as all
Wayland surfaces), which makes it quite inconvenient to move on screen.
libdecor is "a client-side decorations library for Wayland clients"
which can be used precisely for adding decorations to Wayland surfaces.
Add optional support for libdecor in Xwayland to gain decorations when
running rootful and a new command line option "-decorate".
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1332
That allows to differentiate Xwayland's own surfaces from others.
This is preparation work for optional libdecor support.
v2: Check for surface not being NULL (Jonas Ådahl <jadahl@gmail.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The app_id is used to identify applications (and group windows), some
desktops (such as GNOME Shell) use it in their top bar.
Set the XDG toplevel "app_id" to "org.freedesktop.Xwayland" and install
a desktop file for Xwayland rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
So that when running rootful, the compositor can close the Xwayland
window using the xdg-toplevel protocol.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Set a meaningful title for the xdg_surface, it's nicer when running
rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Currently, when running rootful, the toplevel root surface is created in
the same function as the rest of the Wayland surfaces.
Move it to its own function to improve readability - No function change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-host-grab" to disable the keyboard
shortcuts and confine the pointer on the host so that Xwayland can
receive all keyboard events.
This is useful when running a complete desktop environment within
Xwayland rootful.
Use [CTRL]+[SHIFT] to release the keyboard and pointer.
This option is not compatible with rootless mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland tries to be smart and guess the intention of the X11 clients
sometimes, like issuing a pointer lock when a client hides the pointer
when confined.
While this is a good thing when running rootless, this is problematic
when running rootful as the pointer will be automatically locked unless
the "retro" mode is used (which doesn't hide the cursor, unlike the
default).
Make sure we don't trigger the automatic pointer lock when the cursor is
hidden when running rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-fullscreen" to make the rootful Xwayland
window appear fullscreen.
This requires viewport support in the compositor and when used with
"-geometry" can emulate the full range of XRandR resolutions.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When updating the overall screen size, Xwayland would first walk the
window tree then update both the xwl_screen and screen size.
As a result, if any ResizeWindow() handler tries to use the xwl_screen
size, it would get the old (wrong) size instead of the new one.
Make sure to update the xwl_screen size first, prior to traverse the
window tree.
This is preparation work for Xwayland fullscreen mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When using xrandr emulation, the emulated mode is passed as a pointer to
the XRandR mode from the xwl_output associated with the X11 client.
In preparation for fullscreen mode, we want to be able to reuse that
code but use a separate emulated mode.
Simply change the internal API to pass a reference to the emulated mode.
This introduces no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The xdg_toplevel object was used solely when creating the window
surface, and the value of the object discarded.
To be able to make the surface fullscreen using the xdg_toplevel
protocol, we need to have access that object, so keep it around along
with the xwl_window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of the output the surface enters/leaves.
This is fairly basic tracking though, we do not keep a full list of
outputs a surface may be covering partially, we just keep the output
the surface entered last.
This is sufficient as a preparation work for fullscreen though.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a convenient function to get the xwl_output from a given wl_output.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When running rootless as well as rootful, Xwayland gets its outputs
configuration from the Wayland compositor.
When running rootful, it means that we end up with a large black
surface the size of all monitors combined, that's not very convenient
and there is no way for set the desired size of the Xwayland window.
Add a new command line option "-geometry" to force a specific mode when
running rootful for the user to specify the root window size to use for
Xwayland.
That option has no effect when Xwayland is running rootless.
v2: Not using libxcvt as the mode may not be a valid CVT mode.
v3: Add a set of XRandR modes and the RR hooks to make that work.
Update the man page for Xwayland.
v4: Add RandR 1.0 support for older clients
v5: Fix XVidMode failing with a BadMatch
v6: Add a separate xwl_output specifically for fixed mode, instead of
using the existing output list - that will allow for further
improvements like a fullscreen mode eventually.
v7: Sort the RR modes
v8: Fix RandR 1.0
v9: Add physical size
v10: Cleanup
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1338
update_screen_size() takes an xwl_output argument, mostly for historical
reasons, whereas it actually applies to a screen (as its name implies).
Reshuffle the code to take an xwl_screen instead, in preparation for
the geometry mode in Xwayland - No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland uses an output serial number it increments each time a new
Wayland output is added.
On server regeneration, that static value is not cleared, and therfore
the output numbers keep increasing each time the Xserver restarts.
To avoid that issue, make the output serial part of the xwl_screen,
which gets recreated on server regeneration, so that index is reset to 0
automatically on server regeneration.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland's own SetWindowPixmap() handler would be ignored when running
rootful.
This is fine as long as we do not plan to resize the root window,
however this is becoming problematic if we plan to resize the root
window dynamically when running rootful.
Just add the xwl_window_set_window_pixmap() handler regardless of
rootful/rootless mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The function xwl_output_remove() is called when removing a monitor, but
the actual status of the RandR output does not change.
So, when RRTellChanged() is called from update_screen_size(), it won't
have the output connection status up to date in the RandR event
RROutputChangeNotifyEvent and X11 applications relying on that event
like Qt will fail to emit their signal QGuiApplication::screenRemoved.
To avoid that issue, make sure to mark the RandR output as disconnected
prior to call xwl_output_remove().
Fix commit 204f10c29 ("xwayland: Call RRTellChanged if the RandR configuration may have changed")
Signed-off-by: zhoulei <zhoulei@kylinos.cn>
Signed-off-by: Morose <chenlinxiang@kylinos.cn>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Move the xcb_aux_sync into the shm path, where we do still need it to
synchronize access with the host. In the non-shm path the image is
copied to the host anyway so the sync just adds latency and keeps you
from using all your network bandwidth.
Only the non-shm-putimage path benefits from this, but the benefit is
significant even on the local machine (here a 3.2GHz Core i7-8700, using
XEPHYR_NO_SHM=1):
before after Operation
------------ -------------------- -------------------------
228000000.0 225000000.0 (0.987) Dot
40900000.0 41600000.0 (1.017) 1x1 rectangle
10400000.0 10700000.0 (1.029) 10x10 rectangle
477000.0 471000.0 (0.987) 100x100 rectangle
30900.0 31800.0 (1.029) 500x500 rectangle
760000.0 981000.0 (1.291) PutImage 10x10 square
14700.0 19200.0 (1.306) PutImage 100x100 square
320.0 382.0 (1.194) PutImage 500x500 square
749000.0 984000.0 (1.314) ShmPutImage 10x10 square
268000.0 304000.0 (1.134) ShmPutImage 100x100 square
16600.0 18500.0 (1.114) ShmPutImage 500x500 square
Reviewed-by: Emma Anholt <emma@anholt.net>
When the pointer leaves an X11 window, and enters a Wayland native
window, Xwayland has no idea about Wayland native windows and may
generate the wrong crossing events to another X11 window instead.
To avoid that issue, Xwayland implements its own XYToWindow() handler to
compare the Wayland focused surface with the X11 window found in the
window tree.
Commit 59ad0e6a ("xwayland: Fix use after free of cursors") changed the
logic in sprite_check_lost_focus() to use IsParent() to compare the
windows, which works when the X11 window is reparented by the window
manager, but fails in the case of an override redirect window.
To fix the issue, also check whether last_xwindow is the window itself.
Signed-off-by: Morose <chenlinxiang@kylinos.cn>
Fixes: 59ad0e6a - xwayland: Fix use after free of cursors
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
../hw/xfree86/ddc/print_edid.c:511:20: error: format specifies type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat]
det_mon->type - DS_VENDOR);
^~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Adds a -force-xrandr-emulation cmdline switch that always exposes extra
modes when viewporter isn't exposed by the Wayland compositor.
Having the additional modes exposed by the X server is important for
games to function and be configured
Compositors, such as Gamescope (the compositor for Steam Deck),
support only a single window that is rendered in the centre of the
screen that is scaled up to fill the screen by the compositor based
on some user scaling settings.
Exposing viewporter, wouldn't make sense here, and could mislead native
Wayland clients, so exposing dummy modesets in X is preferred here.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Adds the following 16:10 modes primarily for scaling up on Steam Deck:
- 1152x720
- 960x600
- 928x580
- 800x500
- 768x480
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Xwayland does not change the actual XRANDR setup for real, it just
emulates the resolution changes using viewports in Wayland.
With a single output, if an X11 applications tries to change the CRTC
back to the native mode, RRCrtcSet() will simply ignore the request as
no actual change is induced by this.
Set the property "RANDR Emulation" on all Xwayland outputs to make sure
the optimizations in RRCrtcSet() get skipped and Xwayland can receive
and act upon the client request.
Also make sure we do not allow that property to be changed by X11
clients.
v2: Prevent X11 clients from changing the property value
(Pekka Paalanen <pekka.paalanen@collabora.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1305
drm_lease_device_handle_released uses the wrong pointer type in the
callback. This will cause crash when compositor removes drm lease device
object.
Fixes: 089e7f98f - Xwayland: implement drm-lease-v1
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Weng Xuetian <wengxt@gmail.com>
Finishes the work started in commit cd0d4c1bb5
to remove checks for the variable that never varied from 0 after the code
to change it was removed by commit 511c60bc73
in 2006 (xorg-server-1.2.0).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Fixes LGTM warnings:
* Import of 'cProfile' is not used.
* Import of 'pdb' is not used.
* Import of 'string' is not used.
* Import of 'time' is not used.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Fixes LGTM warning "This parameter of type drmModeModeInfo is 68 bytes -
consider passing a const pointer/reference instead."
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Correctness is ensured be checking md5sum result before and after the
commit (it's the same).
Fixes LGTM warning "Comparison is always false because numTimings <= 0."
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Makes the 4-byte cases match those for 1- & 2-byte handling,
moving the break from being unconditionally hit the first time
through the to loop to after the loop is done.
Fixes Solaris Studio compiler warnings:
"prim_ops.c", line 2626: warning: end-of-loop code not reached
"prim_ops.c", line 2692: warning: end-of-loop code not reached
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
switch_to() is only used from #ifdef HAS_USL_VTS code, place it inside
ifdefs to to avoid unused static warning and compile error on systems
without VT_ACTIVATE and VT_WAITACTIVE defines.
Even if there's no pending frame callback yet.
Without this, if there was no pending frame callback yet in
xwl_present_queue_vblank, xwl_present_msc_bump would only get called
from xwl_present_timer_callback, resulting in the MSC ticking at ~58
Hertz.
Doing this requires some adjustments elsewhere:
1. xwl_present_reset_timer needs to check for a pending frame callback
as well.
2. xwl_window_create_frame_callback needs to call
xwl_present_reset_timer for all child windows hooked up to
frame_callback_list, to make sure the timer length takes the pending
frame callback into account.
3. xwl_present_flip needs to hook up the window to frame_callback_list
before calling xwl_window_create_frame_callback, for 2. to work.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1309
Fixes: 9b31358c52 ("xwayland: Use frame callbacks for Present vblank events")
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Without this, xwl_present_reset_timer would call
xwl_present_timer_callback if the timer was originally armed over a
second ago. xwl_present_timer_callback would call xwl_present_msc_bump,
which could end up hooking up the window to
xwl_window->frame_callback_list again. This would lead to use-after-free
in xwl_present_cleanup:
Invalid write of size 8
at 0x42B65C: __xorg_list_del (list.h:183)
by 0x42B693: xorg_list_del (list.h:204)
by 0x42C041: xwl_present_cleanup (xwayland-present.c:354)
by 0x423669: xwl_destroy_window (xwayland-window.c:770)
by 0x4FDDC5: compDestroyWindow (compwindow.c:620)
by 0x5233FB: damageDestroyWindow (damage.c:1590)
by 0x501C5F: DbeDestroyWindow (dbe.c:1326)
by 0x4EF35B: FreeWindowResources (window.c:1018)
by 0x4EF687: DeleteWindow (window.c:1086)
by 0x4E24B3: doFreeResource (resource.c:885)
by 0x4E2ED7: FreeClientResources (resource.c:1151)
by 0x4ACBA4: CloseDownClient (dispatch.c:3546)
Address 0x12f44980 is 144 bytes inside a block of size 160 free'd
at 0x48470E4: free (vg_replace_malloc.c:872)
by 0x423115: xwl_unrealize_window (xwayland-window.c:621)
by 0x4FCDD8: compUnrealizeWindow (compwindow.c:292)
by 0x4F3F5C: UnrealizeTree (window.c:2805)
by 0x4F424B: UnmapWindow (window.c:2863)
by 0x4EF58C: DeleteWindow (window.c:1075)
by 0x4E24B3: doFreeResource (resource.c:885)
by 0x4E2ED7: FreeClientResources (resource.c:1151)
by 0x4ACBA4: CloseDownClient (dispatch.c:3546)
by 0x5E27EE: ClientReady (connection.c:599)
by 0x5E6CB7: ospoll_wait (ospoll.c:657)
by 0x5DE6CD: WaitForSomething (WaitFor.c:208)
Block was alloc'd at
at 0x4849464: calloc (vg_replace_malloc.c:1328)
by 0x4229CE: ensure_surface_for_window (xwayland-window.c:439)
by 0x4231E8: xwl_window_set_window_pixmap (xwayland-window.c:647)
by 0x5232D6: damageSetWindowPixmap (damage.c:1565)
by 0x4FC7BC: compSetPixmapVisitWindow (compwindow.c:129)
by 0x4EDB3F: TraverseTree (window.c:441)
by 0x4FC851: compSetPixmap (compwindow.c:151)
by 0x4F8C1A: compAllocPixmap (compalloc.c:616)
by 0x4FC938: compCheckRedirect (compwindow.c:174)
by 0x4FCD1D: compRealizeWindow (compwindow.c:274)
by 0x4F36EC: RealizeTree (window.c:2606)
by 0x4F39F5: MapWindow (window.c:2683)
Fixes: 288ec0e046 ("xwayland/present: Run fallback timer callback after more than a second")
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When a window is unrealized, Xwayland would destroy the Wayland surface
prior to unrealizing the present window.
xwl_present_flip() will then do a wl_surface_commit() of that surface,
hence causing a use-after-free:
Invalid read of size 8
at 0x49F7FD4: wl_proxy_marshal_array_flags (wayland-client.c:852)
by 0x49F823A: wl_proxy_marshal_flags (wayland-client.c:784)
by 0x42B877: wl_surface_commit (wayland-client-protocol.h:3914)
by 0x42CAA7: xwl_present_flip (xwayland-present.c:717)
by 0x42CD0E: xwl_present_execute (xwayland-present.c:783)
by 0x42C26D: xwl_present_msc_bump (xwayland-present.c:416)
by 0x42C2D1: xwl_present_timer_callback (xwayland-present.c:433)
by 0x42BAC4: xwl_present_reset_timer (xwayland-present.c:149)
by 0x42D1F8: xwl_present_unrealize_window (xwayland-present.c:945)
by 0x4230E2: xwl_unrealize_window (xwayland-window.c:616)
by 0x4FCDD8: compUnrealizeWindow (compwindow.c:292)
by 0x4F3F5C: UnrealizeTree (window.c:2805)
Address 0x1390b8d8 is 24 bytes inside a block of size 80 free'd
at 0x48470E4: free (vg_replace_malloc.c:872)
by 0x49F8029: wl_proxy_destroy_caller_locks (wayland-client.c:523)
by 0x49F8029: wl_proxy_marshal_array_flags (wayland-client.c:861)
by 0x49F823A: wl_proxy_marshal_flags (wayland-client.c:784)
by 0x421984: wl_surface_destroy (wayland-client-protocol.h:3672)
by 0x423052: xwl_unrealize_window (xwayland-window.c:599)
by 0x4FCDD8: compUnrealizeWindow (compwindow.c:292)
by 0x4F3F5C: UnrealizeTree (window.c:2805)
by 0x4F424B: UnmapWindow (window.c:2863)
by 0x4EF58C: DeleteWindow (window.c:1075)
by 0x4E24B3: doFreeResource (resource.c:885)
by 0x4E2ED7: FreeClientResources (resource.c:1151)
by 0x4ACBA4: CloseDownClient (dispatch.c:3546)
Block was alloc'd at
at 0x4849464: calloc (vg_replace_malloc.c:1328)
by 0x49F7F29: zalloc (wayland-private.h:233)
by 0x49F7F29: proxy_create (wayland-client.c:422)
by 0x49F7F29: create_outgoing_proxy (wayland-client.c:664)
by 0x49F7F29: wl_proxy_marshal_array_flags (wayland-client.c:831)
by 0x49F823A: wl_proxy_marshal_flags (wayland-client.c:784)
by 0x4218CA: wl_compositor_create_surface (wayland-client-protocol.h:1291)
by 0x422A0D: ensure_surface_for_window (xwayland-window.c:445)
by 0x4231E8: xwl_window_set_window_pixmap (xwayland-window.c:647)
by 0x5232D6: damageSetWindowPixmap (damage.c:1565)
by 0x4FC7BC: compSetPixmapVisitWindow (compwindow.c:129)
by 0x4EDB3F: TraverseTree (window.c:441)
by 0x4FC851: compSetPixmap (compwindow.c:151)
by 0x4F8C1A: compAllocPixmap (compalloc.c:616)
by 0x4FC938: compCheckRedirect (compwindow.c:174)
To avoid that, call xwl_present_unrealize_window() before destroying the
Wayland surface.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The composite overlay window (COW) can be queried from any X11 client,
not just the X11 compositing manager.
If a client tries to get the composite overlay window, the Xserver will
map the window and block all pointer events (the window being mapped and
on top of the stack).
To avoid that issue, unset the "mapped" state of the composite overlay
window once realized when Xwayland is running rootless.
Note: All Xservers are actually affected by this issue, but with most
regular X servers, the compositing manager will take care of dealing
with the composite overlay window, and an X11 client using
GetOverlayWindow() won't break pointer events for all X11 clients.
Wayland compositors however usually run Xwayland rootless and have no
use for the COW.
v2: Avoid registering damage for the COW (Michel)
v3: Remove the "mapped" test to avoid calling register_damage() if the
COW is not mapped (Michel)
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1314
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This fixes address sanitizer errors when running unit tests. The
additional copying may reduce performance by a small amount, but we
don't care about that because this driver is used for testing only.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
When using colored X11 cursors, the colors would appear wrong, yellow
would show white, green would show as cyan, and blue would show black
whereas red would show fine.
This is because the code expanding the cursor data accounts for green
for both green and blue channels. Funnily this bug has been there from
the beginning.
Fix the issue by correctly account for the color channels.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1303
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
After a change for the xserver to automatically determine the seat
based on the XDG_SEAT variable, xephyr stopped working. This was
because of an old feature where xephyr used to handle evdev
directly. This was dropped some time ago, and now this check is
not needed
Put in a workaround to accept devices of the kernel's hyperv_drm
driver. Makes Xorg work on HyperV Gen 1/2 with the DRM graphics
stack.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Xwayland may open a fair amount of file descriptors for passing Wayland
buffers, even more so when using the `wl_shm` either for the pointer
cursors or for when GLAMOR is not usable.
As a result, Xwayland may hit the (soft) limit of file descriptors
leading to a Wayland protocol error and the termination of Xwayland.
To mitigate that risk, raise the limit to the maximum (hard) limit of
file descriptors (unless of course the limit was set explicitly from the
command line with "-lf").
Note that for completeness, the Wayland compositor may have to do the
same, otherwise the limit might get reached on the compositor side as
well.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1283
If the Wayland compositor doesn't send a pending frame event, e.g.
because the Wayland surface isn't visible anywhere, it could happen that
the timer kept getting pushed back and never fired. This resulted in an
enormous list of pending vblank events, which could take minutes to
process when the frame event finally arrived.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1110
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Jaap Buurman <jaapbuurman@gmail.com>
If there is one platform device, which is not paused nor resumed,
systemd_logind_vtenter() will never get called.
This break suspend/resume, and switching to VT on system with Nvidia
proprietary driver.
This is a regression introduced by f5bd039633
So now call systemd_logind_vtenter() if there are no paused
platform devices.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1271
Fixes: f5bd0396 - xf86/logind: fix call systemd_logind_vtenter after receiving drm device resume
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is minor, but that error message says a wrong function name.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Initially reported downstream in Gentoo. Manifests with errors like:
```
gnu/bin/ld: hw/xfree86/common/libxorg_common.a(xf86fbBus.c.o): in function `xf86ClaimFbSlot':
xf86fbBus.c:(.text+0x20): undefined reference to `sbusSlotClaimed'
/usr/lib/gcc/sparc-unknown-linux-gnu/11.2.0/../../../../sparc-unknown-linux-gnu/bin/ld: xf86fbBus.c:(.text+0x2c): undefined reference to `sbusSlotClaimed'
```
While we use the headers in meson.build, we don't reference xf86sbusBus.c
which defines the missing symbols like sbusSlotClaimed.
Bug: https://bugs.gentoo.org/828513
Signed-off-by: Sam James <sam@gentoo.org>
This commit allows X11 clients running through Xwayland to lease
non-desktop connectors from the Wayland compositor by implementing
support for drm-lease-v1.
In order to not deadlock with the Wayland compositor if its response
to a lease request is delayed, the new interface in _rrScrPriv
introduced in the last commit is used, which makes it possible to
block the X11 client while a response is pending.
Leasing normal outputs is not yet supported, all connectors offered
for lease will be advertised as non-desktop.
Co-authored-by: Xaver Hugl <xaver.hugl@gmail.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Add a new interface to _rrScrPriv to make it possible for the server to
delay answering a lease request, at the cost of blocking the client. This
is needed for implementing drm-lease-v1, as the Wayland protocol has no
defined time table for responding to lease requests.
Signed-off-by: Xaver Hugl <xaver.hugl@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
This was overlooked when converting the function to use libxcvt.
Bring back name initialization from old code.
This was causing a segfault in xf86LookupMode() if modes where
name is NULL are present the modePool list.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
The compositor may send us wl_seat and its capabilities before sending
e.g. relative_pointer_manager or pointer_gesture interfaces. This would
result in devices being created in capabilities handler, but listeners
not, because the interfaces weren't available at the time. So we
manually attempt to setup listeners again.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
The implementation is relatively straightforward because both wayland
and Xorg use libinput semantics for touchpad gestures.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Currently, when given the choice, Xwayland will pick the GBM backend
over the EGLstream backend if both are available, unless the command
line option “-eglstream” is specified.
The NVIDIA proprietary driver had no support for GBM until driver series
495, but starting with the driver series 495, both can be used.
But there are other requirements with the rest of the stack, typically
Mesa, egl-wayland, libglvnd as documented in the NVIDIA driver.
So if the NVIDIA driver series 495 gets installed, Xwayland will pick
the GBM backend even if EGLstream is available and may fail to render
properly.
To avoid that issue, prefer EGLstream if EGLstream and all the Wayland
interfaces are available, and fallback to GBM automatically unless
“-eglstream” was specified.
With this, the compositor, given the choice, can decide which actual
backend Xwayland would use by advertising (or not) the Wayland
"wl_eglstream_controller" interface.
This change has no impact on compositors which do not have support for
EGLstream in the first place.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Add (verbose) statements to trace the actual backend used with glamor.
That can be useful for debugging.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
On a normal startup sequence, the Xwayland glamor backend would log
an error whenever a required Wayland protocol is missing.
Those are not really errors though, more informational messages along
the glamor backend selection process.
Demote those errors to verbose messages to reduce the verbosity of
Xwayland at startup by default.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If no EGLstream capable device is found at startup, Xwayland's EGLstream
backend will log an error message "glamor: No eglstream capable devices
found".
However, considering that the vast majority of drivers do not implement
EGLstream, the lack of EGLstream capable device is more of the norm than
the exception.
Change the error message to a log verbose message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
When switching to VT, the ioctl DRM_DROP_MASTER must be done before
the ioctl VT_RELDISP. Otherwise the kernel can't change the modesetting
reliably, and this leads to the console not showing up in some cases, like
after unplugging a docking station with a DP or HDMI monitor.
Before doing the VT_RELDISP, send a dbus message to logind, to
pause the drm device, so logind will do the ioctl DRM_DROP_MASTER.
With this patch, it changes the order logind will send the resume
event, and drm will be sent last instead of first.
so there is a also fix to call systemd_logind_vtenter() at the right time.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
logind send the resume event for input devices and drm device,
in any order. if we call vt_enter before logind resume the drm device,
it leads to a driver error, because logind has not done the
DRM_IOCTL_SET_MASTER on it.
Keep the old workaround to make sure we call systemd_logind_vtenter at
least once if there are no platform device
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Quite a lot of applications currently expect the screen DPI exposed by
the X server to be 96 even when the real display DPI is different.
Additionally, currently Xwayland completely ignores any hardware
information and sets the DPI to 96. Accordingly the new behavior, even
if it fixes a bug, should not be enabled automatically to all users.
A better solution would be to make the default DPI stay as is and enable
the correct behavior with a command line option (maybe -dpi auto, or
similar). For now let's just revert the bug fix.
This reverts commit 05b3c681ea.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
We were storing the pointer to struct glamor_context. However, glamor
itself is storing the EGLContext pointer since the commit below. Since
the two values could never be equal, this resulted in constant
superfluous eglMakeCurrent calls. The implicit glFlush triggered by
those couldn't be good for performance.
Fixes: 7c88977d33 "glamor: Store the actual EGL/GLX context pointer in lastGLContext"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
The code to clear a cursor pending frame callback was duplicated in
multiple places in the code.
Introduce a new xwl_cursor_clear_frame_cb() function and remove the
duplicated code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
It just make more sense to keep xwl_cursor_release() with the rest of
the cursor code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Two different functions in xwayland-cursor.c and xwayland-input.c use
the same name xwl_seat_update_cursor() which is confusing when reading
the code.
Rename xwl_seat_update_cursor() to xwl_seat_update_all_cursors() in
xwayland-cursor.c to help with readability of the code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Passing -noTouchPointerEmulation results in an error about the
flag not being recognized.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 7d34b1f2b7 ("xwayland: add -noTouchPointerEmulation")
If the tablet tool is moved out of proximity before the cursor's pending
frame callback is received, any further attempts to update the cursor
will fail because the frame callback is still pending.
Make sure to clear any cursor pending frame when the tool gets in
proximity again, similar to what we do when the pointer re-enters a
surface, so that the cursor updates aren't discarded.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/1969
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Some clients (typically Java, but maybe others) rely on ConfigureNotify
or RRScreenChangeNotify events to tell that the XRandR request is
successful.
When emulated XRandR is used in Xwayland, compute the emulated root size
and send the expected ConfigureNotify and RRScreenChangeNotify events
with the emulated size of the root window to the asking X11 client.
Note that the root window size does not actually change, as XRandR
emulation is achieved by scaling the client window using viewports in
Wayland, so this event is sort of misleading.
Also, because Xwayland is using viewports, emulating XRandR does not
reconfigure the outputs location, meaning that the actual size of the
root window which encompasses all the outputs together may not change
in a multi-monitor setup. To work around this limitation, when using an
emulated mode, we report the size of that emulated mode alone as the
root size for the configure notify event.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
SimpleDRM 'devices' are a fallback device, and do not have a busid
so they are getting skipped. This will allow simpledrm to work
with the modesetting driver
The "sync crtc" is the crtc used to drive the display timing of a
drawable under DRI2 and DRI3/Present. If a drawable intersects
multiple video outputs, then normally the crtc is chosen which has
the largest intersection area with the drawable.
If multiple outputs / crtc's have exacty the same intersection
area then the crtc chosen was simply the first one with maximum
intersection. Iow. the choice was random, depending on plugging
order of displays.
This adds the ability to choose a preferred output in such a tie
situation. The RandR output marked as "primary output" is chosen
on such a tie.
This new behaviour and its implementation is consistent with other
video ddx drivers. See amdgpu-ddx, ati-ddx and nouveau-ddx for
reference. This commit is a straightforward port from amdgpu-ddx.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
In a setup with both VRR capable and non-VRR capable displays,
it was so far inconsistent if the driver would allow use of
VRR support or not, as "is_connector_vrr_capable" was set to
whatever the capabilities of the last added drm output were.
Iow. the plugging order of monitors determined the outcome.
Fix this: Now if at least one display is VRR capable, the driver
will treat an X-Screen as capable for VRR, plugging order no
longer matters.
Tested with a dual-display setup with one VRR monitor and one
non-VRR monitor. This is also beneficial with the new Option
"AsyncFlipSecondaries".
When we are at it, also add some so far missing description of
the "VariableRefresh" driver option, copied from amdgpu-ddx.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
A lut size of 4096 slots has been verified to work correctly,
as tested with amdgpu-kms. Intel Tigerlake Gen12 hw has a very
large GAMMA_LUT size of 262145 slots, but also issues with its
current GAMMA_LUT implementation, as of Linux 5.14.
Therefore we keep GAMMA_LUT off for large lut's. This currently
excludes Intel Icelake, Tigerlake and later.
This can be overriden via the "UseGammaLUT" boolean xorg.conf option
to force use of GAMMA_LUT on or off.
See following link for the Tigerlake situation:
https://gitlab.freedesktop.org/drm/intel/-/issues/3916#note_1085315
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
With the GBM backend becoming usable with different drivers such as
NVIDIA, set the GLVND vendor to the same value as the GBM backend name.
Mesa implementation however returns "drm" so we need to special case
this value - Basically, for anything other than "drm" we simply assume
that the GBM backend name is the same as the vendor.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Tested-by: James Jones <jajones@nvidia.com>
Xwayland was passing GBM bos directly to
eglCreateImageKHR using the EGL_NATIVE_PIXMAP_KHR
target. Given the EGL GBM platform spec claims it
is invalid to create a EGLSurface from a native
pixmap on the GBM platform, implying there is no
mapping between GBM objects and EGL's concept of
native pixmaps, this seems a bit questionable.
This change modifies the bo import function to
extract all the required data from the bo and then
imports it as a dma-buf instead when the dma-buf +
modifiers path is available.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Xwayland's xwl_shm_create_pixmap() computes the size of the shared
memory pool to create using a size_t, yet the Wayland protocol uses an
integer for that size.
If the pool size becomes larger than INT32_MAX, we end up asking Wayland
to create a shared memory pool of negative size which in turn will raise
a protocol error which terminates the Wayland connection, and therefore
Xwayland.
Avoid that issue early by return a NULL pixmap in that case, which will
trigger a BadAlloc error, but leave Xwayland alive.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This reverts commit 617f591fc4.
The problem described in that commit exists, but the two
preceeding commits with improvements to the servers RandR
code should avoid the mentioned problems while allowing the
use of GAMMA_LUT's instead of legacy gamma lut.
Use of legacy gamma lut's is not a good fix, because it will reduce
color output precision of gpu's with more than 1024 GAMMA_LUT
slots, e.g., AMD, ARM MALI and KOMEDA with 4096 slot luts,
and some Mediathek parts with 512 slot luts. On KOMEDA, legacy
lut's are completely unsupported by the kms driver, so gamma
correction gets disabled.
The situation is especially bad on Intel Icelake and later:
Use of legacy gamma tables will cause the kms driver to switch
to hardware legacy lut's with 256 slots, 8 bit wide, without
interpolation. This way color output precision is restricted to
8 bpc and any deep color / HDR output (10 bpc, fp16, fixed point 16)
becomes impossible. The latest Intel gen gpu's would have worse
color precision than parts which are more than 10 years old.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
The assumption in the upsampling code was that the crtc->gamma_size
size of the crtc's gamma table is a power of two. This is true for
almost all current driver + gpu combos at least on Linux, with typical
sizes of 256, 512, 1024 or 4096 slots.
However, Intel Gen-11 Icelake and later are outliers, as their gamma
table has 2^18 + 1 slots, very big and not a power of two!
Try to make upsampling behave at least reasonable: Replicate the
last gamma value to fill up remaining crtc->gamma_red/green/blue
slots, which would normally stay uninitialized. This is important,
because while the intel display driver does not actually use all
2^18+1 values passed as part of a GAMMA_LUT, it does need the
very last slot, which would not get initialized by the old code.
This should hopefully create reasonable behaviour with Icelake+
but is untested on the actual Intel hw due to lack of suitable
hw.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
If randrp->palette_size is zero, the memcpy() path can read past the
end of the randr_crtc's gammaRed/Green/Blue tables if the hw crtc's
gamma_size is greater than the randr_crtc's gammaSize.
Avoid this by clamping the to-be-copied size to the smaller of both
sizes.
Note that during regular server startup, the memcpy() path is only
taken initially twice, but then a suitable palette is created for
use during a session. Therefore during an actual running X-Session,
the xf86RandR12CrtcComputeGamma() will be used, which makes sure that
data is properly up- or down-sampled for mismatching source and
target crtc gamma sizes.
This should avoid reading past randr_crtc gamma memory for gpu's
with big crtc->gamma_size, e.g., AMD/MALI/KOMEDA 4096 slots, or
Intel Icelake and later with 262145 slots.
Tested against modesetting-ddx and amdgpu-ddx under screen color
depth 24 (8 bpc) and 30 (10 bpc) to make sure that clamping happens
properly.
This is an alternative fix for the one attempted in commit
617f591fc4.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
We turn this on if the GL underneath us can enable GL_FRAMEBUFFER_SRGB.
We do try to generate both capable and incapable configs, which is to
keep llvmpipe working until the client side gets smarter about its srgb
capabilities.
xwl_present_reset_timer checks if the pending flip is synchronous, so
we need to call it after adding the pending flip to the flip queue.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1219
Fixes: b2a06e0700 "xwayland/present: Drop sync_flip member of struct xwl_present_window"
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Rotation is broken for all drm drivers not providing hardware rotation
support. Drivers that give direct access to vram and not needing dirty
updates still work but only by accident. The problem is caused by
modesetting not sending the correct fb_id to drmModeDirtyFB() and
passing the damage rects in the rotated state and not as the crtc
expects them. This patch takes care of both problems.
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
This is not actually a change for xwayland with gbm, or for xfree86 with
big-GL, but we do change them as well to use EGL_NO_CONFIG_KHR
explicitly.
Reviewed-by: Emma Anholt <emma@anholt.net>
There's no real benefit to using GLX, and the other DDXes are using EGL
already, so let's converge on EGL so we can concentrate the fixes in one
place.
We go to some effort to avoid being the thing that requires libX11 here.
We prefer EGL_EXT_platform_xcb over _x11, and if forced to use the
latter we'll ask the dynamic linker for XGetXCBConnection and
XOpenDisplay rather than link against xlib stuff ourselves. Xephyr is
now a pure XCB application if it can be.
Reviewed-by: Emma Anholt <emma@anholt.net>
Due to a typo in tablet_pad_group(), we would allocate a variable
("group") and test another one ("pad") for allocation success.
Spotted by covscan.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: commit 8475e63 - "xwayland: add tablet pad support"
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
On screen init, if any of the private type registration fails we would
return FALSE without actually freeing the xwl_screen we just allocated.
This is not a serious leak as failure at that point would lead to the
premature termination of Xwayland at startup, but covscan complains and
it's easy enough to fix.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The Linux version of xf86EnableIO calls a helper function called hwEnableIO().
Except on Alpha, this function reads /proc/ioports looking for the 'keyboard'
and 'timer' ports, extracts the port ranges, and enables access to them. It does
this by reading 4 bytes from the string for the start port number and 4 bytes
for the last port number, passing those to atoi(). However, it doesn't add a
fifth byte for a NUL terminator, so some implementations of atoi() read past the
end of this string, triggering an AddressSanitizer error:
==1383==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff71fd5b74 at pc 0x7fe1be0de3e0 bp 0x7fff71fd5ae0 sp 0x7fff71fd5288
READ of size 5 at 0x7fff71fd5b74 thread T0
#0 0x7fe1be0de3df in __interceptor_atoi /build/gcc/src/gcc/libsanitizer/asan/asan_interceptors.cpp:520
#1 0x564971adcc45 in hwEnableIO ../hw/xfree86/os-support/linux/lnx_video.c:138
#2 0x564971adce87 in xf86EnableIO ../hw/xfree86/os-support/linux/lnx_video.c:174
#3 0x5649719f6a30 in InitOutput ../hw/xfree86/common/xf86Init.c:439
#4 0x564971585924 in dix_main ../dix/main.c:190
#5 0x564971b6246e in main ../dix/stubmain.c:34
#6 0x7fe1bdab6b24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
#7 0x564971490e9d in _start (/home/aaron/git/x/xserver/build.asan/hw/xfree86/Xorg+0xb2e9d)
Address 0x7fff71fd5b74 is located in stack of thread T0 at offset 100 in frame
#0 0x564971adc96a in hwEnableIO ../hw/xfree86/os-support/linux/lnx_video.c:118
This frame has 3 object(s):
[32, 40) 'n' (line 120)
[64, 72) 'buf' (line 122)
[96, 100) 'target' (line 122) <== Memory access at offset 100 overflows this variable
HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork
(longjmp and C++ exceptions *are* supported)
SUMMARY: AddressSanitizer: stack-buffer-overflow /build/gcc/src/gcc/libsanitizer/asan/asan_interceptors.cpp:520 in __interceptor_atoi
Shadow bytes around the buggy address:
0x10006e3f2b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x10006e3f2b60: 00 00 f1 f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2[04]f3
0x10006e3f2b70: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x10006e3f2b80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
0x10006e3f2b90: f1 f1 f8 f2 00 f2 f2 f2 f8 f3 f3 f3 00 00 00 00
0x10006e3f2ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1
0x10006e3f2bb0: f1 f1 00 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==1383==ABORTING
Fix this by NUL-terminating the string.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1193#note_1053306
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
GAMMA_LUT sizes other than 1024 cause a crash during startup if the memcpy()
calls in xf86RandR12CrtcSetGamma() read past the end of the legacy X11 /
XVidMode gamma ramp.
This is a problem on Intel ICL / GEN11 platforms because they report a GAMMA_LUT
size of 262145. Since it's not clear that the modesetting driver will generate a
proper gamma ramp at that size even if xf86RandR12CrtcSetGamma() is fixed, just
disable use of GAMMA_LUT for sizes other than 1024 for now. This will cause the
modesetting driver to disable the CTM property and fall back to the legacy gamma
LUT.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1193
Tested-by: Mark Herbert
Whenever an unredirected fullscreen window uses pageflipping for a
DRI3/Present PresentPixmap() operation and the X-Screen has more than
one active output, multiple crtc's need to execute pageflips. Only
after the last flip has completed can the PresentPixmap operation
as a whole complete.
If a sync_flip is requested for the present, then the current
implementation will synchronize each pageflip to the vblank of
its associated crtc. This provides tear-free image presentation
across all outputs, but introduces a different artifact, if not
all outputs run at the same refresh rate with perfect synchrony:
The slowest output throttles the presentation rate, and present
completion is delayed to flip completion of the "latest" output
to complete. This means degraded performance, e.g., a dual-display
setup with a 144 Hz monitor and a 60 Hz monitor will always be
throttled to at most 60 fps. It also means non-constant present
rate if refresh cycles drift against each other, creating complex
"beat patterns", tremors, stutters and periodic slowdowns - quite
irritating!
Such a scenario will be especially annoying if one uses multiple
outputs in "mirror mode" aka "clone mode". One output will usually
be the "production output" with the highest quality and fastest
display attached, whereas a secondary mirror output just has a
cheaper display for monitoring attached. Users care about perfect
and perfectly timed tear-free presentation on the "production output",
but cares less about quality on the secondary "mirror output". They
are willing to trade quality on secondary outputs away in exchange
for better presentation timing on the "production output".
One example use case for such production + monitoring displays are
neuroscience / medical science applications where one high quality
display device is used to present visual animations to test subjects
or patients in a fMRI scanner room (production display), whereas
an operator monitors the same visual animations from a control room
on a lower quality display. Presentation timing needs to be perfect,
and animations high-speed and tear-free for the production display,
whereas quality and timing don't matter for the monitoring display.
This commit gives users the option to choose such a trade-off as
opt-in:
It adds a new boolean option "AsyncFlipSecondaries" to the device section
of xorg.conf. If this option is specified as true, then DRI3 pageflip
behaviour changes as follows:
1. The "reference crtc" for a windows PresentPixmap operation does a
vblank synced flip, or a DRM_MODE_PAGE_FLIP_ASYNC non-synchronized
flip, as requested by the caller, just as in the past. Typically
flips will be requested to be vblank synchronized for tear-free
presentation. The "reference crtc" is the one chosen by the caller
to drive presentation timing (as specified by PresentPixmap()'s
"target_msc", "divisor", "remainder" parameters and implemented by
vblank events) and to deliver Present completion timestamps (msc
and ust) extracted from its pageflip completion event.
2. All other crtc's, which also page-flip in a multi-display configuration,
will try to flip with DRM_MODE_PAGE_FLIP_ASYNC, ie. immediately and
not synchronized to vblank. This allows the PresentPixmap operation
to complete with little delay compared to a single-display present,
especially if the different crtc's run at different video refresh
rates or their refresh cycles are not perfectly synchronized, but
drift against each other. The downside is potential tearing artifacts
on all outputs apart from the one of the "reference crtc".
Successfully tested on a AMD gpu with single-display, dual-display and
triple-display setups, and with single-X-Screen as well as dual-X-Screen
"ZaphodHeads" configurations.
Please consider merging this commit for the upcoming server 1.21 branch.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
It turns out xdmx currently crashes when any client attempts to use GL
and it has been in such state for about 14 years. There was a patch to
fix the problem [1] 4 years ago, but it never got merged. The last
activity on any bugs referring to xdmx has been more than 4 years ago.
Given such situation, I find it unlikely that anyone is still using xdmx
and just having the code is a drain of resources.
[1]: https://lists.x.org/archives/xorg-devel/2017-June/053919.html
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
When using DRI3+Present with PRIME render offload, sometimes there is
a mismatch between the stride of the to-be-presented Pixmap and the
frontbuffer. The current code would reject a pageflip present in this
case if atomic modesetting is not enabled, ie. always, as atomic
modesetting is disabled by default due to brokeness in the current
modesetting-ddx.
Fullscreen presents without page flipping however trigger the copy
path as fallback, which causes not only unreliable presentation timing
and degraded performance, but also massive tearing artifacts due to
rendering to the framebuffer without any hardware sync to vblank.
Tearing is extra awful on modesetting-ddx because glamor afaics seems
to use drawing of a textured triangle strip for the copy implementation,
not a dedicated blitter engine. The rasterization pattern creates extra
awful tearing artifacts.
We can do better: According to a tip from Michel Daenzer (thanks!),
at least atomic modesetting capable kms drivers should be able to
reliably change scanout stride during a pageflip, even if atomic
modesetting is not actually enabled for the modesetting client.
This commit adds detection logic to find out if the underlying kms
driver is atomic_modeset_capable, and if so, it no longer rejects
page flip presents on mismatched stride between new Pixmap and
frontbuffer.
We (ab)use a call to drmSetClientCap(ms->fd, DRM_CLIENT_CAP_ATOMIC, 0);
for this purpose. The call itself has no practical effect, as it
requests disabling atomic mode, although atomic mode is disabled by
default. However, the return value of drmSetClientCap() tells us if the
underlying kms driver is atomic modesetting capable: An atomic driver
will return 0 for success. A legacy non-atomic driver will return a
non-zero error code, either -EINVAL for early atomic Linux versions
4.0 - 4.19 (or for non-atomic Linux 3.x and earlier), or -EOPNOTSUPP
for Linux 4.20 and later.
Testing on a MacBookPro 2017 with Intel Kabylake display server gpu +
AMD Polaris11 as prime renderoffload gpu, X-Server master + Mesa 21.0.3
show improvement from unbearable tearing to perfect, despite a stride
mismatch between display gpu and Pixmap of 11776 Bytes vs. 11520
Bytes. That this is correct behaviour was also confirmed by comparing the
behaviour and .check_flip implementation of the patched modesetting-ddx
against the current intel-ddx SNA Present implementation.
Please consider merging this patch before the server-1.21 branch point.
This patch could also be cherry-picked into the server 1.20 branch to
fix the same limitation.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
In some scenarios, the Wayland compositor might have more knowledge
than the X11 server and may be able to perform pointer emulation for
touch events better. Add a command-line switch to allow compositors
to turn Xwayland pointer emulation off.
Signed-off-by: Simon Ser <contact@emersion.fr>
A misplaced error check can cause this failure scenario, and does
so reliably as tested on Ubuntu 21.04 with KDE Plasma 5 desktop
within the first few seconds of login session startup, rendering
VRR under modesetting-ddx unusable:
1. Some X11 client application changes some window property.
2. ms_change_property() is called as part of the property change
handling call chain (client->requestVector[X_ChangeProperty]).
It removes itself temporarily from the call chain - or so it
thinks, hooking up saved_change_property instead.
3. ret = saved_change_property(client) is called and fails
temporarily for some non-critical reason.
4. The misplaced error check returns early (error abort), without
first restoring ms_change_property() as initial X_ChangeProperty
handler in the call chain again.
-> Now ms_change_property() has removed itself permanently from the
property handler call chain for the remainder of the X session
and VRR property changes on windows are no longer handled, ie.
VRR no longer gets enabled/disabled in response to window VRR
property changes.
Place the error check at the proper place, just as it is correctly
done by amdgpu-ddx, and in modesetting-ddx ms_delete_property()
function.
Verified to fix VRR handling with an AMD gpu under KDE desktop
session.
Please consider merging before branching the server 1.21 branch.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
The xf86CVTMode() was implemented in a standalone source file because it
was being used for both the xfree86 API and the standalone cvt utility.
Now that the cvt utility is removed (as part of libxcvt) we can move the
small xf86CVTMode() function with the rest of the xf86Modes sources.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The cvt utility is now replaced by the standalone version found in
libxcvt, no need to build the one in xfree86 anymore.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Replace the local implementation of the VESA CVT standard timing
modelines generator with the one from libxct to avoid code duplication.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Xwayland is using a copy of the CVT generator found in Xorg.
Rather than duplicating the code within the xserver tree, use the
libxcvt implementation instead.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
If there is an explicit configuration, assign the RandR provider
of the GPUDevice to the screen it was specified for.
If there is no configuration (default case) the screen number is
still 0 so it doesn't change behaviour.
The result is e.g:
# DISPLAY=:0.2 xrandr --listproviders
Providers: number : 2
Provider 0: id: 0xd2 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting
Provider 1: id: 0xfd cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 2 outputs: 2 associated providers: 0 name:Intel
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
We are handling two cases here: the active flip or the pending flip.
For the pending flip (event->pending == TRUE), we called
xwl_present_release_pixmap.
For the active flip (event->pending == FALSE), we called
xwl_present_release_event. However, xwl_present_flip_notify_vblank
already unhooked event->vblank.event_queue. So this was effectively the
same as calling xwl_present_release_pixmap.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Use present_vblank_rec::event_queue instead.
The changes in xwl_present_execute shouldn't really be needed, since
we should never hit queue_vblank in present_execute_wait. But let's be
safe rather than sorry, plus this simplifies the code.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Can just call xwl_present_execute directly.
This allows dropping the window member from struct xwl_present_window as
well.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
We clear the vblank->pixmap field, so next time xwl_present_execute
falls through to present_execute_post.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This allows for various simplifications.
Use the pointer to the struct memory as the event ID. In contrast to
the SCMD code for Xorg (where pending DRM events cannot be cancelled),
this is safe here, because we can destroy pending Wayland callbacks. So
we can't get a callback with a stale pointer to freed memory.
Remove xwl_present_window::release_list in favour of
present_vblank_rec::window_list.
Remove xwl_present_event::xwl_present_window in favour of
present_vblank_rec::window.
xwl_present_free_event is never called for a NULL pointer anymore, no
need to check.
v2:
* Restore DestroyWindow wrapping order to make sure
present_destroy_window doesn't call xwl_present_abort_vblank.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
We can call xwl_present_free_event unconditionally from
xwl_present_abort_vblank, since the sync_callback is already destroyed
in xwl_present_cleanup.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Mainly into xwl_present_check_flip, and call that from
present_wnmd_check_flip_window.
No need for them to be separate anymore.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This will allow eliminating indirections and making the Xwayland Present
code more efficient and easier to follow.
While this technically changes the Xorg video driver ABI, I don't know
of any drivers using the dropped present_wnmd_* symbols, and I doubt a
Xorg driver could make use of them as is anyway.
(As a bonus, Xorg no longer links any Xwayland specific Present code)
v2:
* Wrap DestroyWindow before initializing Present, so that
present_destroy_window runs before xwl_present_cleanup. Avoids crash
due to present_destroy_window calling xwl_present_* functions when
xwl_present_window was already freed. (Olivier Fourdan)
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Not sure why we'd need to abandon a pending stream for a pixmap just
because it's no longer a window pixmap. Let's try not to.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This makes sure RandR events are sent to interested clients as needed.
This was happening implicitly in some cases, but not in others, e.g. if
the root window size didn't change.
If this were to call RRTellChanged more often than necessary in some
cases, that should be harmless, as it only sends events if something
has actually changed since last time.
Should fix https://bugzilla.redhat.com/show_bug.cgi?id=1979892 .
v2:
* Call RRTellChanged at the very end of update_screen_size, just in
case.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
To avoid an EGL stream in the wrong state, if the window pixmap changed
before the stream was connected, we would still keep the pending stream
but mark it as invalid. Once the callback is received, the pending would
be simply discarded.
But all of this is actually to avoid a bug in egl-wayland, there should
not be any problem with Xwayland destroying an EGL stream while the
compositor is still using it.
With that bug now fixed in egl-wayland 1.1.7, we can safely drop all
that logic from Xwayland EGLstream backend.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1189
If the pixmap does not actually change in set_window_pixmap(), there is
no need to invalidate the pending stream, if there's one.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When building xserver with slibtool (https://dev.midipix.org/cross/slibtool)
the build will fail.
/usr/bin/ld: cannot find -ldmxconfig
This is because xserver creates libdmxconfig.a internally and then links with
the linker flag -ldmxconfig. However according to automake documentation the
-lfoo linker flags should only be used for external dependencies and all
internal libraries should be linked with the libtool archive file (.la) or
the static archive (.a) when the former is not available.
GNU libtool is far more permissive and happens to silently obscure this issue
while slibtool fails because it instead sees '-L./.libs -ldmxconfig'.
xf86_platform_devices[i].pdev may be NULL in cases we fail to parse the
busid in config_udev_odev_setup_attribs() (see also [1], [2]) such as
when udev does not give use ID_PATH. This in turn leads to
platform_find_pci_info() being not called and pdev being NULL.
[1]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/993
[2]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1076
Reviewed-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
This is the only place where we don't check whether
primaryBus.id.plat->pdev is not NULL before accessing its members.
It may be NULL in cases we fail to parse the busid in
config_udev_odev_setup_attribs() (see also [1], [2]) such as when udev
does not give use ID_PATH. This in turn leads to
platform_find_pci_info() being not called and pdev being NULL in one of
the items within the xf86_platform_devices array. For this to cause a
crash we only need it to become the primaryBus device.
[1]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/993
[2]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1076
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
screenp->displays[count] (passed to configDisplay() in
configScreen()) is NULL if there is no Virtual setting
in the configuration.
Fixes: f8a6be04d0 ("xfree86: Change
displays array to pointers array to fix invalid pointer issues
after table reallocation")
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Physical dimmension of display can be obtained not just by configuration or
DDC, but also directly from kernel via drmModeGetConnector(). Until now
xserver silently discarded these values even when no configuration nor EDID
were present and fallbacked to default DPI.
There are rare cases when xf86SetDepthBpp is resizing displays array in confScreen.
As that array is shared between set of ScrnInfoRec's then realloc might invalidate chached DispPtr display values in
otheres ScrnInfoRec objects.
If we will change displays array as an array of pointers to DispRec then cached DispRec pointers in ScrnInfoRec
won't be invalid after reallocation of displays array.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
In certain circumstances we will have a lot of flip errors without a
reasonable way to prevent them. In such case we reduce the number of
logged messages to at least not fill the error logs.
The details are as follows:
At least on i915 hardware support for async page flip support depends on
the used modifiers which themselves can change dynamically for a screen.
This results in the following problems:
- We can't know about whether a particular CRTC will be able to do an
async flip without hardcoding the same logic as the kernel as there's no
interface to query this information.
- There is no way to give this information to an application, because
the protocol of the present extension does not specify anything about
changing of the capabilities on runtime or the need to re-query them.
Even if the above was solved, the only benefit would be avoiding a
roundtrip to the kernel and reduced amount of error logs. The former
does not seem to be a good enough benefit compared to the amount of work
that would need to be done. The latter is solved in this commit.
Reviewed-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
In xwl_glamor_eglstream_get_wl_buffer_for_pixmap. This can likely be hit
now with an SHM pixmap via the Present flip path. There might be other
corner cases.
Fixes: f3eb1684fa "xwayland: enable MIT-SHM shared pixmaps"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This mode for displays running on evdi/udl as side effect of failed glamor_egl_init
reverse_prime_offload_mode was initialized to FALSE
After Mesa upgrade to 21.0.0 GL_RENDERER is not llvmpipe that results in successful glamor_egl_init
and reverse_prime_offload_mode enabled.
This commit is explicitly disabling reverse_prime_offload_mode for evdi and udl drivers
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
When the command line option "-terminate" is used, it could be
interesting to give it an optional grace period to let the Xserver
running for a little longer in case a new connection occurs.
This adds an optional parameter to the "-terminate" command line option
for this purpose.
v2: Use a delay in seconds instead of milliseconds
(Martin Peres <martin.peres@mupuf.org>)
v3: Clarify man page entry, ensure terminateDelay is always >= 0,
simplify TimerFree(). (Peter Hutterer <peter.hutterer@who-t.net>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
That will dramatically affect performance, might as well log when we
cannot use GL_OES_EGL_image with the NVIDIA closed-source driver.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If the EGLStream backend is able to use hardware acceleration with the
NVIDIA closed source driver, we should use the "nvidia" GLX
implementation instead of the one from Mesa to take advantage of the
NVIDIA hardware accelerated rendering.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If Xwayland's EGLstream backend supports hardware acceleration with the
NVIDIA closed-source driver, the GLX library also needs to be one
shipped by NVIDIA, that's what GLVND is for.
Add a new member to the xwl_screen that the backend can optionally set
to the preferred GLVND vendor to use.
If not set, "mesa" is assumed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When eglSwapBuffers inserts a new frame into a window's stream, there may be a
delay before the state of the consumer end of the stream is updated to reflect
this. If the subsequent wl_surface_attach, wl_surface_damage, wl_surface_commit
calls are received by the compositor before then, it will (typically) re-use
the previous frame acquired from the stream instead of the latest one.
This can leave the window displaying out-of-date contents, which might never be
updated thereafter.
To fix this, after calling eglSwapBuffers, xwl_glamor_eglstream_post_damage
should call eglStreamFlushNV. This call will block until it can be guaranteed
that the state of the consumer end of the stream has been updated to reflect
that a new frame is available.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1171
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Allow X11 clients to create shared pixmaps via the MIT-SHM
extension under Xwayland. Tested with a wlroots patch [1].
Also add a few assertions to make sure we have wl_buffers where we
need them.
[1]: https://github.com/swaywm/wlroots/pull/2875
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
As of commit 098e0f52 xwl_glamor_eglstream_allow_commits will not allow commits
if the xwl_pixmap does not have an EGLSurface. This is valid for pixmaps backed
by an EGLStream, however pixmaps backed by a dma-buf for OpenGL or Vulkan
rendering will never have an EGLSurface. Unlike EGLStream backed pixmaps,
though, glamor will render directly to the buffer that Xwayland passes to the
compositor. Hence, they don't require the intermediate copy in
xwl_glamor_eglstream_post_damage that EGLStream backed pixmaps do, so there is
no need for an EGLSurface.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The EGLstream backend's post damage function uses a shader and
glDrawArrays() to copy the data from the glamor's pixmap texture prior
to do the eglSwapBuffers().
However, glDrawArrays() can be affected by the GL state, and therefore
not reliably produce the expected copy, causing the content of the
buffer to be corrupted.
Make sure to set the ALU to GXCopy prior to call glDrawArrays() to get
the expected result.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, the EGLstream backend would increment the pixmap refcount for
each commit, and decrease that refcount on the wl_buffer release
callback.
But that's relying on the compositor sending us a release callback for
each commit, otherwise the pixmap refcount will keep increasing and the
pixmap will be leaked.
So instead, increment the refcount on the pixmap only when we have not
received a release notification for the wl_buffer, to avoid increasing
the pixmap refcount more than once without a corresponding release
event.
This way, if the pixmap is still in use when released on the X11 side,
the EGL stream will be kept until the compositor releases it.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
EGLstream's post_damage() would unconditionally return success
regardless of the actual status of the eglSwapBuffers().
Yet, if eglSwapBuffers() fails, we should not post the corresponding
damage as they wouldn't match the actual content of the buffer.
Use the eglSwapBuffers() return value as the return value for
post_damage() and do not take a refrence on the pixmap if it fails.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Use calloc() instead of malloc() like the rest of the code.
Also fix the arguments of calloc() calls to match the definition which
is calloc(size_t nmemb, size_t size).
This is a cleanup patch, no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The EGL surface for the xwl_pixmap is created once the stream is ready
and valid.
If the pixmap's EGL surface fails, for whatever reason, the xwl_pixmap
will be unusable and will end up as an invalid wl_buffer.
Make sure we do not allow commits in that case and recreate the
xwl_pixmap/stream.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Now that the pending stream is associated with the xwl_pixmap for
EGLStream and the xwl_pixmap itself is associated to the pixmap, we have
a reliable way to get to those data from any pending stream.
As a result, the list of pending streams that we keep in the EGLStream
global structure becomes useless.
So we can drop the pending stream's xwl_pixmap and also the list of
pending streams altogether, and save us a walk though that list for each
callback.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit affc47452 - "xwayland: Drop the separate refcount for the
xwl_pixmap" removed the separate reference counter for the xwl_pixmap
which holds the EGLStream.
While that works fine for the common case, if the window's pixmap is
changed before the stream is ready, the older pixmap will be destroyed
and the xwl_pixmap along with it, even if the compositor is still using
the stream.
The code that was removed with commit affc47452 was taking care of that
by increasing the separate reference counter for the xwl_pixmap, but it
no longer the case.
As a result, we may end up with the EGL stream in the wrong state when
trying to use it, which will cascade down into all sort of issues.
To avoid the problem, increase the reference count on the pixmap when it
is marked as invalid in EGLStream's SetWindowPixmap().
This way, the xwl_pixmap and the EGLStream are kept until released by
the compositor, even when the pixmap changes before stream is ready.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: affc47452 xwayland: Drop the separate refcount for the xwl_pixmap
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Previously, we would have pending streams associated with top level X11
windows, keeping temporary accounting for the pending streams before
they get fully initialized for the xwl_pixmap which would be associated
with X11 pixmaps.
If the window content changes before the stream is ready, the
corresponding pending stream would be marked as invalid and the pending
stream would be eventually removed once the stream becomes ready.
Since commit affc47452 - "xwayland: Drop the separate refcount for the
xwl_pixmap", we no longer keep a separate reference counter for the
xwl_pixmap, but rather tie it to the X11 pixmap lifespan. Yet, the
pending stream would still be associated with the X11 toplevel window.
Dissociate the pending streams from the X11 toplevel window, to keep it
tied only to the xwl_pixmap so that we can have:
- pixmap <-> xwl_pixmap
- xwl_pixmap <-> pending stream
Of course, the pending streams remain temporary and get removed as soon
as the ready callback is triggered, but the pending streams are not
linked to the X11 window anymore which can change their content, and
therefore their X11 pixmap at any time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
eglCreateStreamKHR() can fail and return EGL_NO_STREAM_KHR, in which
case there is no point in trying to create a buffer from it.
Similarly, eglCreateStreamProducerSurfaceKHR() also fail and return
EGL_NO_SURFACE, which in turn will be used in eglMakeCurrent() as
draw/read surface, and therefore would mean no draw/read buffer.
In those cases, log the error, and bail out early. That won't solve the
issue but will help with investigating the root cause of issues with
EGLStream backend.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Some functions are called "callback" whereas they are not longer
callback functions or "unref" while they no longer deal with a reference
counter anymore, which is quite confusing. Rename those functions to be
more explicit.
Also, the pending streams can be destroyed in different places, move the
common code to separate function to avoid duplicating code and help with
readability of the code.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
The EGLStream backend would sometime generate GL errors trying to draw
to the framebuffer, which gives an invalid buffer, which in turn would
generate a Wayland error from the compositor which is fatal to the
client.
Check the framebuffer status and bail out early if it's not complete,
to avoid getting into trouble later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If the glamor backend failed to post damage, the caller should do the
same to avoid a failure to attach the buffer to the Wayland surface.
Change the API of Xwayland's glamor backend post_damage() to return a
status so that xwl_window_post_damage() can tell whether the callee
failed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If the buffer is NULL, do not even try to attach it, and risk a Wayland
protocol error which would be fatal to us.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
EGLStream wl_eglstream_display_create_stream() may fail, yet Xwayland
would try to attach the buffer which may cause a fatal Wayland protocol
error raised by the compositor.
Check if the buffer creation worked, and fail gracefully otherwise (like
wayland-eglsurface does).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If a window is being used for direct rendering with OpenGL or Vulkan, and is
using the flipping path for presentation, it's pixmap will be set to a dma-buf
backed pixmap created by the client-side GL driver. However, this means that
xwl_glamor_eglstream_post_damage won't work since it requires that the pixmap
has an EGLSurface that it can render to, which dma-buf backed pixmaps do not.
In this case, though, xwl_glamor_eglstream_post_damage is not necessary since
glamor will have rendered directly to the pixmap, so we can simply pass it
directly to the compositor. There's no need for the intermediate copy we
normally do in that function.
Therefore, this change adds an early-return case to post_damage for dma-buf
backed pixmaps, and removes the corresponding asserts from that function and
allow_commits.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Copied TGL PCI ID from MESA iris_pci_ids.h
This update brings in a significant number of new platform ID's
Sync up until commit f02ae698
Signed-off-by: Mazlan, Hazwan Arif <hazwan.arif.mazlan@intel.com>
On FreeBSD 13.0-CURRENT for PowerPC64 big-endian (BE), X was
crashing in some cases. For instance, when twm was started
and the background was clicked to open its menu, X crashed
with a segmentation fault, trying to dereference a null pointer
at CreatePicture().
There were 2 issues with xorg-server handling of RGB masks that
caused the pointer above to be null and thus the crash:
- wrong use of ffs() to get the RGB offsets from the masks
- overflow when shifting a 16-bit integer
This change fixes both issues. They happen when the system is BE
but has a video adapter using a little-endian (LE) ARGB32
framebuffer. In order to display the correct colors, this setup
requires a BE RGBA32 color format to be used by X, by setting
the RGB masks appropriately, that didn't work properly because of
the issues above.
A lot of that code is the same as in xf86-amdgpu and xf86-nouveau drivers. By removing that functions from
ms namespace we can move that code to common implementation.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Instead of getting the current msc value from the window crtc,
which not exist take the last saved msc value saved in
the window_priv struct
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Provides an implementation for the pixmap_from_buffers DRI3 function for
xwayland's eglstream backend. This will be used by the NVIDIA GLX driver
to pass buffers from client applications to the server. These can then
be presented using the PRESENT extension.
To hopefully make this less error-prone, we also introduce a "type"
field for this struct to distinguish between xwl_pixmaps for the new
DRI3-created pixmaps and those for the existing glamor-created pixmaps.
Additionally, the patch enables wnmd present mode with the eglstream backend.
This involves creating a wl_buffer for the provided dma-buf before importing it
into EGL and passing this to the compositor so it can be scanned out directly
if possible.
Since both backends now support this present mode, the HAS_PRESENT_FLIP flag is
no longer needed, so it can be removed.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
This exposes a new glamor backend function, check_flip, which can be
used to control whether flipping is supported for the given pixmap.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
This moves the modifiers and formats functions previously only available
to the GBM backend to the common glamor code so that it can be used by
both the GBM and EGLStream backends.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
The EGLStream backend can possibly also use the dmabuf interface, so
move the relevant code from the GBM specific source to the common bits.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
According to the "VESA Enhanced EDID Standard", all GTF compliant
displays are continuous frequency.
The GTF support flags in 'Display Range Limits Descriptor' cannot be
used if the display is a non-continuous frequency multi-mode display.
Closes#1105
Signed-off-by: Pascal VITOUX <vitoux.pascal@gmail.com>
Fixes: 6a79a737 ("xfree86: add drm modes on non-GTF panels")
Reviewed-by: Aaron Ma aaron.ma@canonical.com
Rather than trying to create a gamma ramp array of the appropriate size in
drmmode_crtc_init when the GAMMA_LUT property should be used, just flag the crtc
as wanting to use the GAMMA_LUT property and then replace the gamma ramp later,
right before calling xf86HandleColormaps. This avoids a problem during initial
startup where xf86RandR12CreateObjects12 hard-codes a gamma ramp size of 256,
causing xf86RandR12CrtcSetGamma to read past the end of the DIX layer's RandR
gamma ramp array:
PreInit
drmmode_pre_init
drmmode_crtc_init
crtc->gamma_size = 1024
ScreenInit
xf86CrtcScreenInit
xf86RandR12Init
xf86RandR12Init12
xf86RandR12CreateObjects12
RRCrtcCreate
randr_crtc->gammaSize = 0
xf86RandR12InitGamma(pScrn, 256)
RRCrtcGammaSetSize
randr_crtc->gammaSize = 256
xf86RandR12InitGamma
xf86RandR12CrtcInitGamma
RRCrtcGammaSet
xf86RandR12CrtcSetGamma
// crtc->gamma_size is 1024 here, while randr_crtc->gammaRed
// is a 256-element array.
memcpy(crtc->gamma_red, randr_crtc->gammaRed, crtc->gamma_size * sizeof(crtc->gamma_red[0]));
drmmode_setup_colormap
xf86HandleColormaps
xf86RandR12InitGamma
RRCrtcGammaSetSize
randr_crtc->gammaSize = 1024
Fixes: 245b9db0 - modesetting: Use GAMMA_LUT when available
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1126
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
This brings the behavior closer than what we currently have with
autotools-based build system.
Meson does not currently have native support for symlinks.
See https://github.com/mesonbuild/meson/issues/1602.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Meson gets confused when there are two targets of the same name within
the same directory, so we use a different intermediate name.
This is a problem with the Xorg SUID wrapper which has the same filename
as the real Xorg executable and is configured in the same meson.build
file. This commit works around this by using a different filename in
build stage and renaming only when installing.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
This bumps the minimum Wayland version to 1.5 (released in 2014).
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
When using autoconf/automake to build Xwayland, the actual path to
Xwayland is not fully qualified and refers to the "exec_prefix".
As a result, the path provided by the generated pkg-config file is wrong
when using autoconf to build the Xserver.
Fix the xwayland.pc file to also set the variable "prefix" and
"exec_prefix" so that the path to Xwayland is fully resolved.
Add those variables to the meson build as well for good measure.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Since commit 20c78f38, we use the relative pointer for enter/leave
events.
However, sprite_check_lost_focus() which verifies whether the pointer has
left an Xwayland surface still explicitly check for the absolute
pointer.
As a result, no LeaveNotify event is emitted anymore now when the
pointer crosses from an Xwayland surface to a Wayland native one.
Make sure to check the last slave device against get_pointer_event() as
well, not just the absolute pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes: 20c78f38 - xwayland: use get_pointer_device() for enter/leave
handling too
The code path added by commit 69e4b8e6 (xfree86: attempt to autoconfig
gpu slave devices (v3)) assumes that it will only be run if the primary
device on the screen is the first device in xf86configptr->conf_device_lst.
While this is true most of the time, there are two specific cases where
this assumption fails.
First, if the first device in conf_device_lst is assigned to a different
seat than the running X server, it will be skipped by the previous
FIND_SUITABLE macro usage. Second, if the primary device was explicitly
assigned to the screen but auto_gpu_device is still set and no secondary
devices were explicitly listed, that device may not be the first device
in conf_device_lst.
When the first device in conf_device_lst is not the primary device
assigned to the screen, two problems emerge. First, the first device in
conf_device_lst will never be assigned to the screen as a secondary
device. Second, the primary device is additionally assigned to the
screen as a secondary device. The combination of these problems causes
certain otherwise valid configurations to be invalid. For example, if a
primary device is assigned to a screen and a secondary device is listed
in the config but not explicitly assigned to the screen, then one order
of the device sections results in a usable PRIME or Reverse PRIME setup
and the other order does not.
This commit removes the assumption that the primary device is the first
device in conf_device_lst by starting the loop from the start of
conf_device_lst and skipping the primary device when it is encountered.
Signed-off-by: Jacob Cherry <jcherry@nvidia.com>
Xwayland won't emulate XWarpPointer requests if the cursor is visible,
this is to avoid having the cursor jumping on screen and preventing
random X11 clients from controlling the pointer in Wayland, while
allowing games which use that mechanism with a hidden cursor to work in
Xwayland.
There are, however, games which tend to do it in the wrong order, i.e.
show the cursor before moving the pointer, and because Xwayland will not
allow an X11 client to move the pointer while the cursor is visible, the
requests will fail.
Add a workaround for such X11 clients, when the cursor is being shown,
keep it invisible until the cursor is actually moved. This way, X11
clients which show their cursor just before moving it would still have a
chance to succeed.
v2: Add a timeout to show the cursor for well behaved clients.
v3: Some cleanup (Michel)
v4: Do not cancel cursor delay when updating the cursor to avoid
delaying cursor visibility indefinitely if the client keeps
settings different cursors (Michel)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Jaap Buurman jaapbuurman@gmail.com
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/734
A change during the 1.20 development cycle resulted in fbconfigs being walked
and deallocated individually during __glXScreenDestroy. This change
now avoids a use-after-free caused by that change.
==50859==ERROR: AddressSanitizer: heap-use-after-free on address 0x00010d3819c8 at pc 0x0001009d4230 bp 0x00016feca7a0 sp 0x00016feca798
READ of size 8 at 0x00010d3819c8 thread T5
#0 0x1009d422c in __glXScreenDestroy glxscreens.c:448
#1 0x10091cc98 in __glXAquaScreenDestroy indirect.c:510
#2 0x1009d2734 in glxCloseScreen glxscreens.c:169
#3 0x100740a24 in dix_main main.c:325
#4 0x10023ed50 in server_thread quartzStartup.c:65
#5 0x199ae7fd0 in _pthread_start+0x13c (libsystem_pthread.dylib:arm64e+0x6fd0)
#6 0x199ae2d38 in thread_start+0x4 (libsystem_pthread.dylib:arm64e+0x1d38)
0x00010d3819c8 is located 200 bytes inside of 12800-byte region [0x00010d381900,0x00010d384b00)
freed by thread T5 here:
#0 0x101477ba8 in wrap_free+0x98 (libclang_rt.asan_osx_dynamic.dylib:arm64e+0x3fba8)
#1 0x1009d4240 in __glXScreenDestroy glxscreens.c:449
#2 0x10091cc98 in __glXAquaScreenDestroy indirect.c:510
#3 0x1009d2734 in glxCloseScreen glxscreens.c:169
#4 0x100740a24 in dix_main main.c:325
#5 0x10023ed50 in server_thread quartzStartup.c:65
#6 0x199ae7fd0 in _pthread_start+0x13c (libsystem_pthread.dylib:arm64e+0x6fd0)
#7 0x199ae2d38 in thread_start+0x4 (libsystem_pthread.dylib:arm64e+0x1d38)
previously allocated by thread T5 here:
#0 0x101477e38 in wrap_calloc+0x9c (libclang_rt.asan_osx_dynamic.dylib:arm64e+0x3fe38)
#1 0x100925a40 in __glXAquaCreateVisualConfigs visualConfigs.c:116
#2 0x10091cb24 in __glXAquaScreenProbe+0x224 (X11.bin:arm64+0x100730b24)
#3 0x1009cd840 in xorgGlxServerInit glxext.c:528
#4 0x10074539c in _CallCallbacks dixutils.c:743
#5 0x100932a70 in CallCallbacks callback.h:83
#6 0x100932478 in GlxExtensionInit vndext.c:244
#7 0x10020a364 in InitExtensions miinitext.c:267
#8 0x10073fe7c in dix_main main.c:197
#9 0x10023ed50 in server_thread quartzStartup.c:65
#10 0x199ae7fd0 in _pthread_start+0x13c (libsystem_pthread.dylib:arm64e+0x6fd0)
#11 0x199ae2d38 in thread_start+0x4 (libsystem_pthread.dylib:arm64e+0x1d38)
Regressed-in: 4b0a3cbab1
CC: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
It violates @autoreleasepool best practices, and this helps collapse quartzCocoa.m into quartz.c
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
There is a place where this code was called on the main thread.
We're using a rather nasty anti-pattern to just call a block inline rather
than synchonously calling it on the main thread if we're already on the main
thread. This code could use a good overhaul, but I don't have time to rip
it apart right now. This will address the immediate issue.
Fixes: https://github.com/XQuartz/XQuartz/issues/40
Fixes: https://github.com/XQuartz/XQuartz/issues/48
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
In Weston, clicking the window decoration of an Xwayland client gives us a
wl_pointer.button event immediately followed by a wl_pointer.leave event.
The leave event does not contain any button state information, so the button
remains logically down in the DIX.
Once the pointer button is released, a wl_pointer.enter event is sent with
the current button state (zero). This needs to trigger a ButtonRelease event
but for that we need to ensure that the device is the same as the one we send
ButtonPress events through.
Fixes a regression introduced in a4095162ca.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Trying to change the acceleration/threshold on Xwayland cannot work, and
the corresponding handler xwl_pointer_control() is a no-op.
Yet, an X11 client trying to change those on the touch device may
possibly cause a crash because the touch device in Xwayland doesn't set
that.
Initialize the touch device's PtrFeedback to make sure that just cannot
happen.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1137
We are using the relative pointer for motion events, but buttons and
axis events still go through the absolute pointer device.
That means additional DeviceChanged events that could be avoided if the
buttons and axis events were coming from the same device as motion
events.
Route those events to the relative pointer if available so that motion,
buttons and axis events come from the same device (most of the time).
Suggested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Related: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
The relative pointer only has 2 axis, if we want to route the mouse
wheel events to that device, we need to add the axis definition, similar
to what is done for the absolute pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Related: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
This is a cleanup patch, no functional change.
Split the function dispatch_pointer_motion_event() into three separate
simpler functions, relative motion with a warp emulator, relative motion
and absolute motion.
This makes the code a lot easier to read for me, rather than having
everything in a single function with nested if/else conditions.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland supports relative motion events from the Wayland compositor via
the relative-pointer protocol, and converts those to the absolute range
in device units for raw events.
Some X11 clients however wrongly assume relative values in the axis
values even for devices explicitly labeled as absolute. While this is a
bug in the client, such applications would work fine in plain Xorg but
not with Xwayland.
To avoid that issue, use the relative values for raw events without
conversion, so that such application continue to work in Xwayland.
Thanks Peter for figuring out the root cause.
v2: Don't duplicate relative and absolute events (Peter)
v3: Use POINTER_RAWONLY (Peter)
Suggested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
This add a new flag POINTER_RAWONLY for GetPointerEvents() which does
pretty much the opposite of POINTER_NORAW.
Basically, this tells GetPointerEvents() that we only want the
DeviceChanged events and any raw events for this motion but no actual
motion events.
This is preliminary work for Xwayland to be able to use relative motion
events for raw events. Xwayland would use absolute events for raw
events, but some X11 clients (wrongly) assume raw events to be always
relative.
To allow such clients to work with Xwayland, it needs to switch to
relative raw events (if those are available from the Wayland
compositor).
However, Xwayland cannot use relative motion events for actual pointer
location because that would cause a drift over time, the pointer being
actually controlled by the Wayland compositor.
So Xwayland needs to be able to send only relative raw events, hence
this API.
Bump the ABI_XINPUT_VERSION minor version to reflect that API addition.
v2: Actually avoid sending motion events (Peter)
v3: Keep sending raw emulated events with RAWONLY (Peter)
Suggested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Related: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
When an X11 client issues an active grab on the keyboard, Xwayland
forward this to the Wayland compositor using the Xwayland specific
protocol "xwayland-keyboard-grab" if it can find the corresponding
Xwayland window.
Some X11 clients (typically older games) however try to issue the
keyboard grab on the X11 root window, which has obviously no matching
Xwayland window. In such a case, the grab is simply ignored and the game
will not work as expected.
To workaround that issue, if an X11 client issues a keyboard grab on the
root window, Xwayland will search for a toplevel window belonging to the
same X11 client that it can use as the grab window instead.
This way, the grab can be forwarded to the Wayland compositor that can
either grant or deny the request based on the window and its internal
policies.
The heuristic picks the first realized toplevel window belonging to the
client so that the Wayland compositor will send it the keyboard events,
and the Xserver grab mechanism will then take care of routing the events
to the expected X11 window by itself.
v2: Make the test more clear (Dor Askayo <dor.askayo@gmail.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/1249
Not all extensions can be enabled or disabled at runtime, list the
extensions which can from the help message rather than on error only.
v2:
* Print the header message in the ListStaticExtensions() (Peter
Hutterer)
* Do not export ListStaticExtensions() as Xserver API
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The definition relies on IOPortBase, which is only ever set in
hw/xfree86/os-support/bsd/arm_video.c
This caused build failures on linux/mips with GCC 10, due to this
change (from https://gcc.gnu.org/gcc-10/changes.html#c):
"GCC now defaults to -fno-common. As a result, global variable accesses
are more efficient on various targets. In C, global variables with
multiple tentative definitions now result in linker errors. With
-fcommon such definitions are silently merged during linking."
As a result anything including compiler.h would get its own definition
of IOPortBase and the linker would error out.
Since commit b3f3d65e, xwayland now supports the command line option
"-listenfd" for passing file descriptors and marked "-listen" as
deprecated for this specific purpose.
Add a new pkg-config variable "have_listenfd" to the xwayland.pc so that
compositors can know this is available and use listenfd in place of the
deprecated option.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
There are currently no callers that make use of the "created" output parameter
of xwl_glamor_pixmap_get_wl_buffer. Remove it, along with the corresponding
argument of the associated EGL backend entrypoint.
Just a small code cleanup, there is no need to allocate a variable only
to check the return value of eglInitialize().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Glamor requires at least big GL 2.1 or GLES2, therefore Xwayland tries
to initialize first GL and then GLES2 if that fails.
It does that all in one single function which makes the code slightly
complicated, move the initialization of big-GL and GLES2 to separate
functions to help with readability of the code.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
We currently bail out early for GLES only devices, and call
epoxy_gl_version() too early for GLES only that will make GLES only
devices return NULL for glGetString(GL_RENDERER).
Let's also add a check to see if we need to recreate the context to
avoid pointless warnings for GLES only devices as suggested by
Olivier Fourdan <ofourdan@redhat.com>.
Fixes: a506b4ec - xwayland: make context current to check GL version
Signed-off-by: Tony Lindgren <tony@atomide.com>
The window buffer mechanism would free the pixmap and its corresponding
Wayland buffer as soon as window buffers are disposed.
Typically when the X11 window is unrealized, the current window buffer
is still used by the Wayland compositor and yet Xwayland will destroy
the buffer.
As a matter of fact, Xwayland should not destroy the Wayland buffer
before the wl_buffer.release event is received.
Add a reference counter to the window buffer similar to the to pixmap
reference counter to keep the buffer around until the release callback
is received.
Increase that reference counter on the buffer which will be attached to
the surface, and drop that reference when receiving the release callback
notification.
v2: Use a specific reference counter on the buffer rather than relying
on the pixmap refcnt (Michel Dänzer <mdaenzer@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
The cursor code would destroy the buffer as soon as the cursor is
unrealized on X11 side.
Yet, the Wayland compositor may still be using the buffer as long as a
released callback has not been received.
Increase the reference counter on the pixmap to hold a reference on the
pixmap when attaching it to the surface and use the new pixmap release
callback mechanism to release that reference when the buffer is
released.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The seat and tablet cursor functions are very similar, factorize the
commonalities to simplify the code and reduce the copy/paste.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit 6a5a4e6037 removed the option to
configure useSIGIO option. Indeed, the xfree86 SIGIO support was
reworked to use internal versions of OsBlockSIGIO and OsReleaseSIGIO.
As a result, useSIGIO is no longer needed and can dropped
Fixes: 6a5a4e60 - Remove SIGIO support for input [v5]
Closes: xorg/xserver#1107
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@nxp.com>
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
LogMessage logs only when the XLOG_VERBOSITY is >= 1, but by default
XLOG_VERBOSITY is 0, so for example warning about deprected -listen
parameter is never shown when running "Xwayland -listen 32 -help".
Signed-off-by: Mariusz Ceier <mceier+freedesktop@gmail.com>
By default, the macro DebugPresent() is a no-op but it can be enabled
at build time for debugging purpose.
However, doing so prevents the code to build because one debug statement
tries to make use of a non-existent variable:
present.c: In function ‘ms_present_queue_vblank’:
present.c:147:18: error: ‘vbl’ undeclared (first use in this function)
147 | vbl.request.sequence));
| ^~~
present.c:49:32: note: in definition of macro ‘DebugPresent’
49 | #define DebugPresent(x) ErrorF x
| ^
Fix the build with DebugPresent() by removing the vbl variable from the
debug message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
With !155, the device bus ID received via udev is constructed
properly with the "usb:" prefix. But, it is not enough to
make the following line to work in Section "Device":
BusID "usb:0:1.2:1.0"
Introduce BUS_USB, so the prefix can be distinguished from BUS_PCI
and check the supplied BusID value against device->attribs->busid
in xf86PlatformDeviceCheckBusID().
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
Provide an actual definition of noDriExtension where used, rather than a
tentative definition in a header, to fix compilation with -fno-common
(the default with gcc 10).
EGLStream implementation in Xwayland keeps a list of pending streams for
a window.
If the windows's pixmap is destroyed while there is a pending stream,
the pending stream will point to freed memory once the callback is
triggered.
Make sure to cancel the pending stream if there's one when the pixmap is
destroyed.
v2:
* Use xorg_list_for_each_entry() instead of the safe variant (Michel
Dänzer <mdaenzer@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Karol Szuster <karolsz9898@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Closes https://gitlab.freedesktop.org/xorg/xserver/-/issues/1096
Commit 77658741 - "xwayland: Add buffer release callback" added an API
to deal with Wayland buffer release callbacks.
The EGLstream implementation has its own wl_buffer callback, move that
to the buffer release API instead so we don't have to deal with Wayland
buffers directly and match the other Xwayland pixmap backend
implementations.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Erik Kurzinger <ekurzinger@nvidia.com>
Resolves warnings from Oracle Parfait static analyser:
Error: Misleading macro
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'|' operator has higher precedence than ternary '?:' operator inside macro body at line 431
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 431
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 431
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 431
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 442
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 442
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 443
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'|' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 441
Misleading macro [misleading-macro]:
misleading evaluation of ternary '?:' operator in expansion of macro V_ADDR_RB due to missing parentheses
at line 392 of hw/xfree86/int10/generic.c.
'<<' operator has higher precedence than ternary '?:' operator inside macro body at line 443
low precedence ternary '?:' operator is hidden by expansion of macro V_ADDR_RB at line 443
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Resolves warning from Oracle Parfait static analyser:
Error: Unchecked result
Unchecked result [unchecked-result-call-X]:
Unchecked return value from call to XOpenDisplay. Value display must be ch
ecked to ensure this function was successful.
at line 73 of hw/dmx/examples/xbell.c in function 'main'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
It runs XTS via piglit on (non-rootless) Xwayland on weston using the
headless backend.
Xwayland might use glamor if enabled in the build, but we're making sure
it uses software rendering.
v2:
* Use weston-info to wait for weston to be ready, instead of just a
fixed sleep. (Martin Peres)
v3:
* Build wayland 1.18 & weston 9.0 locally, since the packages in Debian
buster are too old for current Xwayland.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
As Xwayland is usually spawned by the Wayland server/compositor, its
command line options are not always adjustable.
Yet, if EGLStream is not supported in a given Xwayland build, the option
will do nothing (yet we must still accept it otherwise Xwayland would
refuse to run if the Wayland compositor uses it).
If Xwayland was built without support for EGLStream, there is not point
in showing the option in the help message though.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
The command line options "-shm" is used to instruct Xwayland to prefer
shared-memory for passing buffers to the Wayland server, rather than
using glamor and DRI3.
The option was there from the beginning, yet not documented in the
"-help" message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
One general assumption in Xwayland is that the xwl_window remains the
same for all the child windows of the toplevel window.
When mapping a new X11 window, ensure_surface_for_window() checks for an
existing xwl_window by using xwl_window_get() which will just check for
the registered xwl_window for the window.
That means that a client mapping a child window of an existing window
with a xwl_window will get another different xwl_window.
If an X11 client issues a Present request on the parent window, hence
placed underneath its child window of the same size, the Wayland
compositor may not send the frame callback event for the parent's
Wayland surface which is reckoned to be not visible, obscured behind
the other Wayland surface for the child X11 window.
That bug affects some games running in wine which may get 1 fps because
the repaint occurs only on timeout with a long interval (as with, e.g.
https://bugs.winehq.org/show_bug.cgi?id=47066)
Fix ensure_surface_for_window() by using xwl_window_from_window() which
will walk the window tree, so that a child window won't get another
xwl_window than its parent.
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1099
See-also: https://bugs.winehq.org/show_bug.cgi?id=47066
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When running non-rootless, Xwayland requires that the Wayland compositor
supports the XDG-WM-Base protocol.
Check for XDG-WM-Base protocol support at startup and exit cleanly if
missing rather than segfaulting later in ensure_surface_for_window()
while trying to use xdg_wm_base_get_xdg_surface().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Instead, bump the pixmap's refcount at the bottom of post_damage to
reflect the compositor's hold on the buffer, and "destroy" the pixmap in
the buffer release callback (which will dec the pixmap's refcount and
free if necessary).
Signed-off-by: Adam Jackson <ajax@redhat.com>
When the "CTM" (color transform matrix) modesetting property is available,
create a corresponding RandR property.
To match the format of the property available in the amdgpu driver, expose it as
an array of 18 32-bit XA_INTEGERs representing a 3x3 matrix in row-major order,
where each entry is a S31.32 sign-magnitude fixed-point number with the
fractional part listed first.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
If the kernel exposes GAMMA_LUT and GAMMA_LUT_SIZE properties and the size is
not what the server has pre-configured for the crtc, free the old gamma ramp
memory allocated by the server and replace it with new allocations of the
appropriate size.
In addition, when GAMMA_LUT is available, use drmModeCreatePropertyBlob() and
drmModeObjectSetProperty() to set the gamma ramp rather than using the legacy
drmModeCrtcSetGamma() function.
Add a new option "UseGammaLUT" to allow disabling this new behavior and falling
back to drmModeCrtcSetGamma() unconditionally.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Modeset properties can be set even when ms->atomic_modeset is disabled by using
the drmModeObjectSetProperty() function.
This will be necessary in a later change in order to set the GAMMA_LUT and CTM
properties.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
This is useful for mock input drivers that control the server in
integration tests. Given that input submission happens on a different
thread than processing, it's otherwise impossible for the driver to
synchronize with the completion of the processing of submitted events.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
The EGLStream backend keeps a queue of pending streams for each Xwayland
window.
However, when this pending queue is freed, the corresponding private
data may not be cleared (typically if the pixmap for this window has
changed before the compositor finished attaching the consumer for the
window's pixmap's original eglstream), leading to a use-after-free and a
crash when trying to use that data as the window pixmap.
Make sure to clear the private data when the pending stream is freed.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1055
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Karol Szuster <karolsz9898@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using multiple window buffers crashes with EGLStream, which does not
need it anyway as this is handled through EGL directly.
Add a flag to the EGL backend to indicate whether it would benefit from
multiple buffers and use this in the get_buffer() function.
Thanks to Adam Jackson <ajax@redhat.com> for pointing out that issue
with EGLStream.
v2: Fix logical test (Adam Jackson <ajax@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The present flip does not work with the EGLStream backend. Similarly,
the EGLStream backend does not require the buffer to be flushed as
eglSwapBuffers() should take care of this.
Instead of actually checking the backend in use in the present code,
add a flag in the form of a bitfield to the EGL backend to indicate
its features and requirements.
This should not introduce any functional change.
v2: Fix logical test (Adam Jackson <ajax@redhat.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Major/minor numbers are a.. major (ha) source of pain in FreeBSD porting.
In this case, Xwayland was thinking that /dev/dri/card0 is already a render node,
because the st_rdev on FreeBSD was passing the Linux-style check,
and because of the assumption, acceleration would fail because
various ioctls like AMDGPU_INFO would be denied on the non-render node.
Switch to libdrm's function that already works correctly on all platforms.
Signed-off-by: Greg V <greg@unrelenting.technology>
Reviewed-by: Emmanuel Vadot <manu@FreeBSD.org>
Fetch VariableRefresh option value from X conf file for
modesetting backend DDX driver. This option defaults to false,
and must be set to "true" in conf file for variable refresh
support in the DDX driver.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Window wrappers gets the notification when the window
properties changes. These wrappers are mainly used to
keep track of per-window _VARIABLE_REFRESH property values.
These changes have been ported from AMDGPU
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
These changes have been ported from AMD GPU DDX driver.
This patch adds support for setting the CRTC variable refresh property
for suitable windows flipping via the Present extension.
In order for a window to be suitable for variable refresh it must have
the _VARIABLE_REFRESH property set by the MESA and inform Modesetting
DDX driver with window property updates.
Then the window must pass the checks required to be suitable for
Present extension flips - it must cover the entire X screen and no
other window may already be flipping. And also DRM connector should
be VRR capable.
With these conditions met every CRTC for the X screen will have their
variable refresh property set to true.
Kernel Changes to support this feature in I915 driver is under development.
Tested with DOTA2, Xonotic and custom GLX apps.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
We can only flip if the window pixmap matches that of the toplevel
window. Doing so regardless could cause the toplevel window pixmap to
get destroyed while it was still referenced by the window, resulting in
use-after-free and likely a crash.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1033
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
The need_rotate variable is only used once anymore and had semantics which lead
to errors in the past. In particular when negated we are dealing with a double
negation.
The variable gets replaced with a simple check on the xdg-output directly.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
This reverts commit 427f8bc009.
When receiving an output update for the mode size we need to rotate the stored
width and height values if and only if we have an xdg-output for this output
since in this case the stored values describe the output's size in logical
space, i.e. rotated.
The here reverted commit made a code change with which we would not rotate though
when an xdg-output was available since in this case the need_rotate variable was
set to False what caused in the check afterwards the first branch to execute.
That is just a small style-change to the output_get_new_size function. The
function before did take first the height and then the width argument, what
is unusual since resolutions are normally named the other way around, for
example 1920x1080. Also compare the update_screen_size function.
Therefore change the order of arguments for output_get_new_size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
We can just read out the xdg_output field of the provided xwl_output to check
if a rotation is necessary or not.
This makes the function easier to understand. Additionally some documentation
is added.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Xwayland is just a Wayland client, no X11 screensaver should be
expected to work reliably on Xwayland when running rootless because
Xwayland cannot grab the input devices so it has no way to actually
lock the screen managed by the Wayland compositor.
Turn off the screensaver on Xwayland when running rootless by setting
the screensaver timeout and interval and their default values to zero
and disable the MIT-SCREEN-SAVER extension.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1051
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of optionally return early when an event is aborted and potentially
clean it up in there we can only optionally inform Present if not aborted and
afterwards clean it up if required.
Saves some lines of code and conditional branches.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
With the newly introduced separate API method for idling a presented Pixmap in
window mode we can simplify the logic by allowing calls to it at any point in
time.
This is done by setting the flip_idler flag if the Pixmap was idled before
being presented.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Notifying Present about events' states was done prior with the single function
present_wnmd_event_notify just like in screen mode. But it is more intelligible
if at least in window mode we make use of three different functions with names
that directly indicate what their purpose is:
* present_wnmd_event_notify only for queued events feedback.
* present_wnmd_flip_notify for when a presentation occured (flip).
* present_wnmd_idle_notify for when the Pixmap of the event can be reused.
This is an API-breaking change in regards to window mode. DDX written against
the previous version won't work anymore. It is assumed that there only exists
the XWayland DDX at the moment using the window mode such that this is not an
issue for the overall ecosystem.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Rename the lists release_queue to release_list and event_list to
wait_list.
The prior names release_queue and event_list were ambiguous: in both are event-
like vblanks which can be removed from the lists in random order. In the
release_queue can be flips that are already released but still wait for the
sync or frame callback but normally the release comes later. In the event_list
are queued events waiting for a later msc.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Commit 1e3f9ea1 removed some NULL checks from xf86RandR12.c, on the premise that
they can't be reached unless RandR has already been initialized. For threesuch
calls, that's not true:
xf86Crtc.c::xf86CrtcScreenInit():
if (c == config->num_crtc) {
xf86RandR12SetRotations(screen, RR_Rotate_0 | RR_Rotate_90 |
RR_Rotate_180 | RR_Rotate_270 |
RR_Reflect_X | RR_Reflect_Y);
xf86RandR12SetTransformSupport(screen, TRUE);
}
else {
xf86RandR12SetRotations(screen, RR_Rotate_0);
xf86RandR12SetTransformSupport(screen, FALSE);
}
xf86Crtc.c::xf86CrtcCloseScreen():
xf86RandR12CloseScreen(screen);
This change adds checks back to xf86RandR12Set{Rotations,TransformSupport}() and
xf86RandR12CloseScreen(), checking that xf86RandR12KeyRec has been registered.
Without this, X will hit an assert that causes it to abort.
Signed-off-by: Alex Goins <agoins@nvidia.com>
This (so-far) Linux-only API lets users create file descriptors purely
in memory, without any backing file on the filesystem and the race
condition which could ensue when unlink()ing it.
It also allows seals to be placed on the file, ensuring to every other
process that we won’t be allowed to shrink the contents, potentially
causing a SIGBUS when they try reading it.
This patch is best viewed with the -w option of git log -p.
This is a port of this commit from Weston:
deae98ef45Fixes#848.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
When a slave device causes the master virtual pointer device to change
device types, the device's private data pointer
(device->public.devicePrivate) is also changed to match the type of the
slave device. This can be a problem though, as tablet pad devices will
set the device's private data pointer to their own xwl_tablet_pad
struct. This can cause us to dereference the pointer as the wrong type,
and result in a segfault:
Thread 1 "Xwayland" received signal SIGSEGV, Segmentation fault.
wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at src/wayland-client.c:792
792 va_start(ap, opcode);
(gdb) bt
0 wl_proxy_marshal (proxy=0x51, opcode=opcode@entry=0) at
src/wayland-client.c:792
1 0x00005610b27b6c55 in wl_pointer_set_cursor (hotspot_y=0,
hotspot_x=0, surface=0x0, serial=<optimized out>, wl_pointer=<optimized
out>) at /usr/include/wayland-client-protocol.h:4610
2 xwl_seat_set_cursor (xwl_seat=xwl_seat@entry=0x5610b46d5d10) at
xwayland-cursor.c:137
3 0x00005610b27b6ecd in xwl_set_cursor (device=<optimized out>,
screen=<optimized out>, cursor=<optimized out>, x=<optimized out>,
y=<optimized out>) at xwayland-cursor.c:249
4 0x00005610b2800b46 in miPointerUpdateSprite (pDev=0x5610b4501a30) at
mipointer.c:468
5 miPointerUpdateSprite (pDev=0x5610b4501a30) at mipointer.c:410
6 0x00005610b2800e56 in miPointerDisplayCursor (pCursor=0x5610b4b35740,
pScreen=0x5610b3d54410, pDev=0x5610b4501a30) at mipointer.c:206
7 miPointerDisplayCursor (pDev=0x5610b4501a30, pScreen=0x5610b3d54410,
pCursor=0x5610b4b35740) at mipointer.c:194
8 0x00005610b27ed62b in CursorDisplayCursor (pDev=<optimized out>,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at cursor.c:168
9 0x00005610b28773ee in AnimCurDisplayCursor (pDev=0x5610b4501a30,
pScreen=0x5610b3d54410, pCursor=0x5610b4b35740) at animcur.c:197
10 0x00005610b28eb4ca in ChangeToCursor (pDev=0x5610b4501a30,
cursor=0x5610b4b35740) at events.c:938
11 0x00005610b28ec99f in WindowHasNewCursor
(pWin=pWin@entry=0x5610b4b2e0c0) at events.c:3362
12 0x00005610b291102d in ChangeWindowAttributes (pWin=0x5610b4b2e0c0,
vmask=<optimized out>, vlist=vlist@entry=0x5610b4c41dcc,
client=client@entry=0x5610b4b2c900) at window.c:1561
13 0x00005610b28db8e3 in ProcChangeWindowAttributes (client=0x5610b4b2c900)
at dispatch.c:746
14 0x00005610b28e1e5b in Dispatch () at dispatch.c:497
15 0x00005610b28e5f34 in dix_main (argc=16, argv=0x7ffc7a601b68,
envp=<optimized out>) at main.c:276
16 0x00007f8828cde042 in __libc_start_main (main=0x5610b27ae930 <main>,
argc=16, argv=0x7ffc7a601b68, init=<optimized out>, fini=<optimized
out>, rtld_fini=<optimized out>, stack_end=0x7ffc7a601b58) at
../csu/libc-start.c:308
17 0x00005610b27ae96e in _start () at cursor.c:1064
Simple reproducer in gnome-shell: open up an Xwayland window, press some
tablet buttons, lock and unlock the screen. Repeat if it doesn't crash
the first time.
So, let's fix this by registering our own device-specific private key
for storing a backpointer to xwl_tablet_pad, so that all input devices
have their private data pointers set to their respective xwl_seat.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <lyude@redhat.com>
In 9141196d positional coordinates were added to the damage call of pixmap
flips. The damage box coordinates are in screen space though and we need
to convert them first to surface-relative ones by substracting the origin
of the window.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Xwayland is usually spawned by the Wayland compositor which sets the
command line options.
If a command line option is not supported, Xwayland will fail to start.
That somehow makes the Xwayland command line option sort of ABI, the
Wayland compositor need to know if a particular option is supported by
Xwayland at build time.
Also, currently, Xwayland is being installed along with the rest of the
common executable programs that users may run, which is sub-optimal
because, well, Xwayland is not a common executable program, it's meant
to be a proxy between the Wayland compositor and the legacy X11 clients
which wouldn't be able to run on Wayland otherwise.
Xwayland would be better installed in `libexec` but that directory is
(purposedly) not in the user `PATH` and therefore the Wayland compositor
may not be able to find Xwayland in that case.
To solve both problems (which options are supported by Xwayland and
where to look for it), add a `pkg-config` file specifically for Xwayland
which gives the full path to Xwayland (`xwayland`) and which options it
supports (using `pkg-config` variables).
The `pkg-config` file also provides the `Version` so the build scripts
can check for a particular version if necessary.
Obviously, Wayland compositors are not required to use the `pkg-config`
file and can continue to use whatever mechanism they deem preferable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The way Xwayland works (like all Wayland clients), it first queries the
Wayland registry, set up all relevant protocols and then initializes its
own structures.
That means Xwayland will get the Wayland outputs from the Wayland
compositor, compute the physical size of the combined outputs and set
the corresponding Xwayland screen properties accordingly.
Then it creates the X11 screen using fbScreenInit() but does so by using
a default DPI value of 96. That value is used to set the physical size
of the X11 screen, hence overriding the value computed from the actual
physical size provided by the Wayland compositor.
As a result, the DPI computed by tools such as xdpyinfo will always be
96 regardless of the actual screen size and resolution.
However, if the Wayland outputs get reconfigured, or new outputs added,
or existing outputs removed, Xwayland will recompute and update the
physical size of the screen, leading to an unexpected change of DPI.
To avoid that discrepancy, use a fixed size DPI (defaults to 96, and can
be set using the standard command lime option "-dpi") and compute a
physical screen size to match that DPI setting.
Note that only affects legacy core protocols, X11 clients can still get
the actual physical output size as reported by the Wayland compositor
using the RandR protocol, which also allows for the size to be 0 if the
size is unknown or meaningless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/731
ProcVidModeGetGamma() relies on GetGamma() to initialise values if it
returns TRUE. Without this, we're sending uninitialised values to
clients.
Fixes: xorg/xserver#1040
When running with a weston session without a pointer device (thus with
the wl_seat not having a pointer) xwayland pointer warping and pointer
confining should simply be ignored to avoid crashes.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Since the introduction of "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize" the fb_id isn't initialited at
drmmode_xf86crtc_resize.
Rotate operation of XRandR uses rotate_bo. So in this case the fb_id
associated to the front_bo is not initialized at drmmode_set_mode_major.
So fd_id remains 0.
As every call to drmmode_xf86crtc_resize allocates a new front_bo we should
destroy unconditionally the old_front_bo if operation success. So we free
the allocated GBM handles.
This avoids crashing xserver with a OOM in the RPI4 1Gb at 4k resolution
after 3 series xrandr rotations from normal to left and vice versa reported at
https://github.com/raspberrypi/firmware/issues/1345
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1024
Fixes: 8774532121 "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize"
These events aren't reachable after xwl_present_cleanup, so they're
leaked if we don't free them first.
This requires storing the pixmap pointer in struct xwl_present_window.
Luckily, the buffer pointer isn't used for anything, so just replace
that.
v2:
* Bump pixmap reference count in xwl_present_flip and drop it in
xwl_present_free_event, fixes use-after-free in the latter due to the
pixmap already being destroyed.
Reviewed-by: Dave Airlie <airlied@redhat.com>
During a VT-Switch a raw pointer to the shared cursor object
is saved which is then freed (in case of low refcount) by a call to
xf86CursorSetCursor with argument pCurs = NullCursor.
This leads to a dangling pointer which can follow in a use after free.
This fix ensures that there is a shared handle saved for the VT-Switch cycle.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the linux-dmabuf protocol is available, prefer it over the old
wl_drm protocol. Previously wl_drm was used when modifiers aren't
supported, however linux-dmabuf supports formats without modifiers too.
In this case, linux-dmabuf will send a DRM_FORMAT_MOD_INVALID modifier
for each supported format [1].
This allows compositors to better handle these buffers, getting a
DMA-BUF and implementing features like direct scan-out.
A similar logic has been implemented for EGL [2].
DRM_FORMAT_MOD_INVALID is now stored in the xwl_screen->formats list.
glamor_get_modifiers still returns FALSE with zero modifiers if the
only advertised modifier is DRM_FORMAT_MOD_INVALID.
[1]: fb9b2a8731
[2]: c376865f5e
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Previously, linux-dmabuf was used unconditionally if the buffer had a
modifier. However creating a linux-dmabuf buffer with a format/modifier
which hasn't been advertised will fail.
Change xwl_glamor_gbm_get_wl_buffer_for_pixmap to use linux-dmabuf when
the format/modifier has been advertised only.
Signed-off-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1035
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This flag should only be used when the caller intends to display the
buffer on a hardware plane. Xwayland isn't a DRM client, so it doesn't
make sense to use this flag.
This change will allow the driver to potentially use buffer parameters
that are more optimized.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Without this the client library will flail around looking for a default
provider, probably one named "indirect", and that defeats the point of
having the EGL provider for direct context support in the first place.
This assumes that "mesa" will work, of course, and in general it should.
Mesa drivers will DTRT through the DRI3 setup path, and if our glamor is
atop something non-Mesa then you should fall back to llvmpipe like 1.20.
In the future it might be useful to differentiate the vendor here based
on whether glamor is using gbm or streams.
Fixes: xorg/xserver#1032
None of the current BSD is actually using this code.
(checked DragonFly 5.8.1, FreeBSD 11.2, NetBSD 9.0 and OpenBSD 6.7)
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
In file included from ../glx/glxdri2.c:35:
/usr/local/include/GL/internal/dri_interface.h:43:10: fatal error: 'drm.h' file not found
#include <drm.h>
^~~~~~~
In file included from ../glx/glxdriswrast.c:39:
/usr/local/include/GL/internal/dri_interface.h:43:10: fatal error: 'drm.h' file not found
#include <drm.h>
^~~~~~~
Xwayland uses the device private to point to the `xwl_seat`.
Device may be removed at any time, including on suspend.
On resume, if the DIX code ends up calling a function that requires the
`xwl_seat` such as `xwl_set_cursor()` we may end up pointing at random
data.
Make sure the clear the device private data on removal so that we don't
try to use it and crash later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
https://gitlab.freedesktop.org/xorg/xserver/issues/709
Drop GBM_BO_USE_SCANOUT from the GBM_BO_IMPORT_FD import, add
GBM_BO_USE_RENDERING to the GBM_BO_IMPORT_FD_MODIFIER import.
If the DMA-BUF cannot be scanned out, gbm_bo_import with
GBM_BO_USE_SCANOUT will fail. However Xwayland doesn't need to scan-out
the buffer and can work fine without scanout. Glamor only needs
GBM_BO_USE_RENDERING.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
In this pretty Wine/Proton specific kludge, we try to handle confining grabs
on InputOnly windows by trying to find the InputOutput window that the pointer
would get visually confined to.
The grabbing window and the visible window come from different clients, so
we used to simply resort to the pointer focus. This is troublesome though, as
the call may happen very soon at a time that the toplevel wasn't yet mapped by
the Wayland compositor, so the pointer focus may well be out of date soon.
In these situations, it does seem that even though the confining grab happens
too early to have the wayland surface mapped, the xserver view of the WindowPtr
does already reflect the size. Use this to find out the better window to
assign the confining grab to, one whose geometry fully contains the InputOnly
window's.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_seat_maybe_lock_on_hidden_cursor() checks that the value of
cursor_confinement_window is not NULL, yet there is no code path
that could lead to this.
Remove the test for cursor_confinement_window being set, it's useless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client issues a ConfinePointer wit ha hidden cursor,
Xwayland may translate that as a pointer lock.
However, if the pointer is located on another window at the time,
the request may be ignored, even if the pointer later enters the window.
To avoid that issue, check again if locking the pointer with a hidden
cursor is needed when pointer enters a surface.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When an X11 client has an active grab on the pointer, all events are
reported relative to the window with the grab.
For Xwayland, if an X11 client has a grab with a pointer confinement
active, while pointer focus is on another window, motion events should
not be reported to the client with the grab, because that sets the X11
client appart, the events would be reported when the pointer is on any
X11 window but not on Wayland native surfaces.
Therefore, if the pointer is confined on a window and that window
differs from the actual pointer focus window, just pretend we lost
pointer focus to another window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If a client issues a grab on the pointer while the cursor is on another
X11 window, and then hides the cursor, we may end up locking the pointer
onto that other window.
Then a button click might end up moving the focus away from the window
which issued the grab, leaving the whole setup in a mixed up state.
Typically, if the pointer is on another X11 window, we should not try to
lock the pointer, so that it can be moved back to the window which
actually issues the grab (and hence the pointer confinement). Typically,
this is the same as an X11 client issuing a pointer grab while the
cursor is on another Wayland native window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/962
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Mostly http->https conversions, but also replaces gitweb.fd.o
with gitlab.fd.o, and xquartz.macosforge.org with xquartz.org.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
On systems with ACPI but disabled APM (e.g. --disable-linux-apm)
the code does not compile due to preprocessor directives.
If APM is disabled, the final return statement is considered to
be part of ACPI's last if-statement, leading to a function which
has no final return statement at all.
I have refactored the code so ACPI and APM are independent of each
other.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Mutter recently added headless tests, and when running those tests the
Wayland compositor runs for a very short time.
Xwayland is spawned by the Wayland compositor and upon startup will
query the various Wayland protocol supported by the compositor.
To do so, it will do a roundtrip to the Wayland server waiting for
events it expects.
If the Wayland compositor terminates before Xwayland has got the replies
it expects, it will loop indefinitely calling `wl_display_roundtrip()`
continuously.
To avoid that issue, add a new `xwl_screen_roundtrip()` that checks for
the returned value from `wl_display_roundtrip()` and fails if it is
negative.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
All helper client code now uses xcb, so calling XSetAuthorization() is
no longer needed.
This is the last reference to libX11 from helper clients, so linking
with x11-xcb and libX11 is no longer required.
Also drop (unneeded?) linking with libXau.
Also drop installing these prerequistes on AppvVeyor.
Also move prototypes for functions in winauth.c from win.h into a new
header, winauth.h, and include that where needed.
Convert clipboard integration code from libX11 to xcb
This drops support for COMPOUND_TEXT. Presumably some ancient
(pre-2000) clients exist which support that, but not UTF8_STRING, but we
don't have an example to test with. (Given the nature of the thing, the
users of those clients probably work in CJK languages)
Supporting COMPOUND_TEXT would also involve writing (or extracting from
Xlib) support for the ISO 2022 encoding.
v2:
Fix the length of text property set by a SelectionRequest
The length of the text property is not neccessarily the same as the
length of the clipboard text before it is d2u converted (specifically,
if that contains any '\r\n' sequences, it will be shorter as they are
now just '\n')
Always use CF_UNICODETEXT clipboard format. Windows will automatically
down-convert to CF_TEXT for clients which request that.
This is subtly different in one way: if CF_TEXT is requested, we now
post CF_UNICODETEXT and it is converted to CF_TEXT *in the locale of the
requesting process*. Previously, we would convert to CF_TEXT *in our
locale* and post that.
It looks like the code in the !X_HAVE_UTF8_STRING case didn't actually
work correctly, but fortunately that has never been true...
The original Win32 clipboard API is widely regarded as terrible, since
it relies on clients co-operatively managing the clipboard viewer chain,
and a single buggy client can break it for all other clients.
The last Windows version only supporting that API was Windows XP (5.1),
EOLed in 2014.
(This requires MinGW-w64 w32api 6.0.0 or later for
Add/RemoveClipboardListener correctly exported by the x86_64 user32
implib)
Also, relax the timeout mechanism so it allows 1 second between events,
rather than 1 second for the entire transfer, as transfers of large
pastes can take more than 1 second.
Also, prefer UTF8_STRING encoding to COMPOUND_TEXT encoding
This option was implemented before the drivers were split in ≈2006,
and e.g. XWin still supports it.
With this commit, Xorg regains support, so that the following configuration can
be used to set the repeat rate for all keyboard devices without having to modify
Xorg command-line flags or having to automate xset(1):
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "de"
Option "XkbVariant" "neo"
Option "AutoRepeat" "250 30"
EndSection
Signed-off-by: Michael Stapelberg <stapelberg@google.com>
We were only calling xwl_present_unrealize_window for the toplevel
window, but the list can contain entries from child windows as well,
in which case we were leaving dangling pointers to freed memory.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/1000
Fixes: c5067feaee "xwayland: Use single frame callback for Present
flips and normal updates"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Recently, rooted Xwayland crashes on wlroots-based compositors, because
wlroots removed the deprecated wl_shell protocol.
This MR fixes this by changing the code in question to the xdg-shell
protocol. My motivation do this: on etnaviv-based embedded platforms,
rooted Xwayland is much faster and doesn't cause UI rendering bugs
compared to rootless Xwayland.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Since the recent fix to call xwl_output_set_window_randr_emu_props() from
ensure_surface_for_window(), it is now only called on a toplevel window,
so the is-toplevel check is not necessary for the
xwl_output_set_window_randr_emu_props() case.
This commit moves the check to xwl_output_set_randr_emu_prop_callback()
so that we only do it when we are walking over all Windows of a client
to update the property on a change of the emulated resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For window-manager managed windows, xwl_realize_window is only called for
the window-manager's decoration window and not for the actual client window
on which we should set the _XWAYLAND_RANDR_EMU_MONITOR_RECTS prop.
Usualy this is not a problem since we walk all client windows to update
the property when the resolution is changed through a randr call.
But for apps which first do the randr change and only then create their
window this does not work, and our xwl_output_set_window_randr_emu_props
call in xwl_realize_window is a no-op as that is only called for the wm
decoration window and not for the actual client's window.
This commit fixes this by making ensure_surface_for_window() call
xwl_output_set_window_randr_emu_props on the first and only child of
window-manager managed windows.
Note this also removes the non-functional xwl_output_set_window_randr_emu_props
call from xwl_realize_window, which was intended to do this, but does not
work.
This fixes apps using the ogre3d library always running at the
monitors native resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some clients, which use vidmode to change the resolution when going fullscreen,
create an override-redirect window and never trigger the screen->ResizeWindow
callback we rely on to do the xwl_window_check_resolution_change_emulation().
This causes us to not apply a viewport to them, causing the fullscreen window
to not fill the entire monitor.
This commit adds a call to xwl_window_check_resolution_change_emulation()
at the end of ensure_surface_for_window() to fix this. Note that
ensure_surface_for_window() exits early without creating an xwl_window
for new windows which will not be backed by a wayland surface and which
thus will not have an xwl_window.
This fixes ClanLib-0.6.x and alleggl-4.4.x using apps not properly
fullscreening.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The code building the mode-list does the following to deal with screen
rotation:
if (need_rotate || xwl_output->rotation & (RR_Rotate_0 | RR_Rotate_180)) {
mode_width = xwl_output->width;
mode_height = xwl_output->height;
} else {
mode_width = xwl_output->height;
mode_height = xwl_output->width;
}
This means we need to do something similar in xwl_output_set_emulated_mode()
to determine if the mode being set is the actual (not-emulated) output mode
and we this should remove any emulated modes set by the client.
All callers of xwl_output_set_emulated_mode always pass a mode pointer
to a member of xwl_output->randr_output->modes, so we do not need to
duplicate this code, instead we can simply check that the passed in mode
is modes[0] which always is the actual output mode.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not only hook the ResizeWindow method of the screen (which really is
MoveAndResize) but also hook the MoveWindow method for checking if we
need to setup a viewport for resolution change emulation.
Our resolution change emulation check if the windows origin matches
the monitors origin and the windows origin can also be changed by just
a move without being resized.
Also checking on a move becomes esp. important when we move to checking
on changes to the top-level non-window-manager client (X11)Window instead
of on changes to the xwl_window later on in this patch series.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The recent change to use the top-level non-window-manager Window drawable
coordinates from xwl_window_check_resolution_change_emulation() in
combination with only calling it on a resize when the top-level window
is moved breaks things with mutter/gnome-shell.
When fullscreening a X11 window, mutter moves its window-decoration Window
wrapping the top-level Window to the monitor's origin coordinates (e.g. 0x0)
last. This updates the top-level's drawable coordinates, but as the
actual MoveWindow is called on the wrapper Window and not on the toplevel
we do not call xwl_window_check_resolution_change_emulation() and we never
enable the viewport.
This commit fixes this by also calling
xwl_window_check_resolution_change_emulation() if the Window being moved
is an xwl_window itself.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a reparented window is resized directly check the emulation instead of
doing this only when the window manager parent window is resized, what might
never happen.
For that to work we need to make sure that we compare the current size of the
client toplevel when looking for an emulated mode.
Changes by Hans de Goede:
- Remove xwl_window x, y, width and height members as those are no longer used.
- Add check for xwl_window_from_window() returning NULL.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make window_get_none_wm_owner return the first non-wm-window instead of the
owner (client) of the first non-wm-window and rename it to
window_get_client_toplevel to match its new behavior.
This is a preparation patch for switching to using the drawable coordinates
in xwl_window_should_enable_viewport()
Changes by Hans de Goede:
- Split this change out into a separate patch for easier reviewing
- Rename window_get_none_wm_owner to window_get_client_toplevel to match
its new behavior
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An X11 window manager might add a chain of parent windows when reparenting to a
decoration window.
That is for example the case for KWin, which reparents client windows to one
decoration and another wrapper parent window.
Account for that by a recursion into the tree. For now assume as before that
all X11 window managers reparent with one child only for these parent windows.
Changes by Hans de Goede:
- Move the xwl_window_is_toplevel() from a later patch in this series here
as it really belongs together with these changes
- Drop no longer necessary xwl_window argument from window_get_none_wm_owner
parameters
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a viewport is already created we can reuse this object instead of
destroying it and getting a new one for updating the source rectangle and
destination size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of iterating over all clients which are listening for events on the
root window and checking if the client we are dealing with is the one
listening for SubstructureRedirectMask | ResizeRedirectMask events and thus
is the window-manager, cache the client-id of the window-manager in
xwl_screen and use that when checking if a client is the window-manager.
Note that we cache and compare the client-id rather then the ClienPtr,
this saves reading the ClientPtr from the global clients array when doing
the comparison.
Suggested-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Xorg supports the '-version' command line option, add something similar
to Xwayland.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/976
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
xf86platformProbeDev didn't check the device path, fix it.
This is a problem when trying to set up a non-PCI device via
explicit xorg.conf.d configuration.
An USB DisplayLink device, being non-PCI was always set up
as a GPU device assigned to screen 0 instead of a regular
framebuffer, potentially having its own dedicated screen,
despite such configuration as below. Only the relevant parts
of the configuration are quoted, it's part of a larger context
with an Intel chip that has 3 outputs:
* DP1 connected to an LCD panel,
* VGA1 connected to an external monitor,
* HDMI1 unconnected and having no user visible connector
Section "ServerFlags"
Option "AutoBindGPU" "false"
EndSection
...
Section "Device"
Identifier "Intel2"
Driver "intel"
BusID "PCI:0:2:0"
Screen 2
Option "Monitor-HDMI1" "HDMI1"
Option "ZaphodHeads" "HDMI1"
EndSection
Section "Device"
Identifier "UDL"
Driver "modesetting"
Option "kmsdev" "/dev/dri/card0"
#BusID "usb:0:1.2:1.0"
Option "Monitor-DVI-I-1" "DVI-I-1"
Option "ShadowFB" "on"
Option "DoubleShadow" "on"
EndSection
...
Section "Screen"
Identifier "SCREEN2"
Option "AutoServerLayout" "on"
Device "UDL"
GPUDevice "Intel2"
Monitor "Monitor-DVI-I-1"
SubSection "Display"
Modes "1024x768"
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "LAYOUT"
Option "AutoServerLayout" "on"
Screen 0 "SCREEN"
Screen 1 "SCREEN1" RightOf "SCREEN"
Screen 2 "SCREEN2" RightOf "SCREEN1"
EndSection
On the particular machine I was trying to set up an UDL device,
I found the following structure was being used to match
the device to a platform device while I was debugging the issue:
xf86_platform_devices[0] == Intel, /dev/dri/card1, primary platform device
xf86_platform_devices[1] == UDL, /dev/dri/card0
devList[0] == "Intel0", ZaphodHeads: DP1
devList[1] == "Intel1", ZaphodHeads: VGA1
devList[2] == "UDL"
devList[3] == "Intel2", ZaphodHeads: HDMI1 (intended GPU device to UDL)
When xf86platformProbeDev() matched the UDL device, the BusID
check failed in both cases of:
* BusID "usb:0:1.2:1.0" was specified
* Option "kmsdev" "/dev/dri/card0" was specified
As a result, xf86platformProbeDev() went on to call probeSingleDevice()
with xf86_platform_devices[0] and devList[2], resulting in the
UDL device being set up as a GPU device assigned to the first screen
instead of as a framebuffer on the third screen as the configuration
specified.
Checking Option "kmsdev" in code code may be a layering violation.
But the modesetting driver is actually part of the Xorg sources
instead of being an external driver, so he "kmsdev" path knowledge
may be used here.
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
In between the two phases introduced by the previous change. This makes
sure all pending drawing to the new buffers is flushed before they're
committed to the Wayland server.
The first phase sets the new surface properties for all damaged
windows, then the second phase commits all surface updates.
This is preparatory for the next change, there should be no observable
change in behaviour (other than the order of Wayland protocol
requests).
Reviewed-by: Adam Jackson <ajax@redhat.com>
Resulted in a build failure with -Werror:
../hw/xfree86/drivers/modesetting/drmmode_display.c: In function ‘drmmode_crtc_set_mode’:
../hw/xfree86/drivers/modesetting/drmmode_display.c:759:15: error: unused variable ‘screen’ [-Werror=unused-variable]
759 | ScreenPtr screen = crtc->scrn->pScreen;
| ^~~~~~
Fixes: c66c548eab "modesetting: Call glamor_finish from
drmmode_crtc_set_mode"
Reviewed-by: Adam Jackson <ajax@redhat.com>
I introduced this error with the MST hotplug code, but it can trigger
on zaphod setups, and is perfectly fine. There is no support for
MST/hotplug on zaphod setups currently, so we can just skip over
the dynamic connector handling here. However we shouldn't skip
over the lease handling so move it into the codepath.
Fixes: 9257b1252d ("modesetting: add dynamic connector hotplug support (MST) (v3)")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It flushes any pending drawing to the kernel, to make sure it'll be
visible to the Wayland server.
Without this, it was possible for the Wayland server to process surface
commits before Xwayland got around to flushing the corresponding
drawing, which could result in stale or even completely random window
contents being visible.
v2:
* Make EGL backend post_damage hook mandatory, don't check for NULL in
xwl_glamor_post_damage. (Olivier Fourdan)
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Avoids a crash in xf86RotatePrepare -> DamageRegister during
CreateScreenResources if rotation or another transform is configured for
any connected RandR output in xorg.conf. The generic rotation/transform
code generally can't work without the root window currently.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/969
Fixes: 094f42cdfe "xfree86/modes: Call xf86RotateRedisplay from
xf86CrtcRotate"
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
xcb_aux_parse_color takes a non-const pointer, even though it doesn't
modify the string or take ownership of its memory.
Avoids the following warning from GCC:
../hw/kdrive/ephyr/hostx.c: In function ‘hostx_init’:
../hw/kdrive/ephyr/hostx.c:683:30: warning: passing argument 1 of ‘xcb_aux_parse_color’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
683 | if (!xcb_aux_parse_color("red", &red, &green, &blue)) {
| ^~~~~
In file included from ../hw/kdrive/ephyr/hostx.c:50:
/usr/include/xcb/xcb_aux.h:194:27: note: expected ‘char *’ but argument is of type ‘const char *’
194 | xcb_aux_parse_color(char *color_name,
| ~~~~~~^~~~~~~~~~
There's a free(name) at the end of the function.
GCC warned about this:
../hw/xfree86/loader/loadmod.c: In function ‘LoadModule’:
../hw/xfree86/loader/loadmod.c:702:18: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
702 | m = name = "int10";
| ^
For the miClearDrawable prototype. Apparently it doesn't get pulled in
for some build configurations, breaking the build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since commit d8ec33fe05, an include on
glxvndabi.h has been added to hw/xfree86/common/xf86Init.c
However, if glx is disabled through --disable-glx and GLX headers are
not installed in the build's environment, build fails on:
In file included from xf86Init.c:81:
../../../include/glxvndabi.h:64:10: fatal error: GL/glxproto.h: No such file or directory
64 | #include <GL/glxproto.h>
| ^~~~~~~~~~~~~~~
Fix this failure by removing this include which does not seem to be
needed (an other option would have been to keep it under an ifdef GLXEXT
block)
Fixes:
- http://autobuild.buildroot.org/results/de838a843f97673d1381a55fd4e9b07164693913
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Fixes build failure.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/954
Fixes: 89e32d00f6 "xwayland: Move Xwayland windows to its own sources"
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Calling rrGetScrPriv when RandR isn't initialized causes an assertion
failure that aborts the server:
Xorg: ../include/privates.h:121: dixGetPrivateAddr: Assertion `key->initialized' failed.
Thread 1 "Xorg" received signal SIGABRT, Aborted.
0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff7892897 in abort () from /usr/lib/libc.so.6
#2 0x00007ffff7892767 in __assert_fail_base.cold () from /usr/lib/libc.so.6
#3 0x00007ffff78a1526 in __assert_fail () from /usr/lib/libc.so.6
#4 0x00007ffff7fb57c1 in dixGetPrivateAddr (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:121
#5 0x00007ffff7fb5822 in dixGetPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:136
#6 0x00007ffff7fb586a in dixLookupPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:166
#7 0x00007ffff7fb8445 in CreateScreenResources (pScreen=0x555555ab1790) at ../hw/xfree86/drivers/modesetting/driver.c:1335
#8 0x000055555576c5e4 in xf86CrtcCreateScreenResources (screen=0x555555ab1790) at ../hw/xfree86/modes/xf86Crtc.c:744
#9 0x00005555555d8bb6 in dix_main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/main.c:214
#10 0x00005555557a4f0b in main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/stubmain.c:34
This can happen, for example, if the server is configured with Xinerama
and there is more than one X screen:
Section "ServerLayout"
Identifier "crash"
Screen 0 "modesetting"
Screen 1 "dummy" RightOf "modesetting"
Option "Xinerama"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "dummy"
Driver "dummy"
EndSection
Section "Screen"
Identifier "dummy"
Device "dummy"
EndSection
The problem does not reproduce if there is only one X screen because of
this code in xf86RandR12Init:
#ifdef PANORAMIX
/* XXX disable RandR when using Xinerama */
if (!noPanoramiXExtension) {
if (xf86NumScreens == 1)
noPanoramiXExtension = TRUE;
else
return TRUE;
}
#endif
Fix the problem by checking dixPrivateKeyRegistered(rrPrivKey) before
calling rrGetScrPriv. This is similar to what the xf86-video-amdgpu
driver does:
fd66f5c0be/src/amdgpu_kms.c (L388)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit cb1b1e184 modified msSharePixmapBacking() to derive modesettingPtr from
the 'screen' argument. Unfortunately, the name of the argument is misleading --
the screen is the slave screen. If the master is modesetting,
and the slave is not modesetting, it will segfault.
To fix the problem, this change derives modesettingPtr from
ppix->drawable.pScreen. This method is already used when calling
ms->glamor.shareable_fd_from_pixmap() later in the function.
To avoid future issues, this change also renames the 'screen' argument to
'slave'.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Now that each source and header should be in order, we can safely cleaup
the last remaining bits from the main `xwayland.h` which is not needed
anymore and can be removed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland GLX declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland vidmode declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland CVT declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland screen related code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland cursor declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland output declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland input declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland Present declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland generic pixmap code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Over time, Xwayland main source file `xwayland.c` has grown in size
which makes it look cluttered and harder to read.
Move the code dealing with Xwayland window to its own source and header
files.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the GLAMOR relevant declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the SHM relevant declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, `xwayland.h` contains all the declarations, which is a bit
awkward and hard to follow.
Move the Xwayland structures declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Similar to what is done in Xorg. Not doing this prevented apps from
using GLX with a Composite visual, e.g. Firefox WebRender or Chromium.
v2:
* Fix inverted direct_color test, fixes Chromium as well.
* Drop Composite extension guards, since other Xwayland code calls
compRedirectWindow/compUnredirectWindow unconditionally anyway.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/921
Fixes: 8469241592 "xwayland: Add EGL-backed GLX provider"
Reviewed-by: Adam Jackson <ajax@redhat.com> # v1
Instead of only the fallback timer.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/854
v2:
* Drop unused frame_callback member of struct xwl_present_window
(Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Using a list of Present windows that need to be called back.
This prepares for the following change, there should be no change in
observed behaviour.
v2:
* Use xwl_window_create_frame_callback instead of making the
frame_listener struct non-static (Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Damage coordinates are relative to the drawable, (0,0) being the top
left corner inside the border.
Therefore, when applying damages or accumulating damages between window
buffers, we need to take the window border width into account as well,
otherwise the updates might be only partial or misplaced.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Right now, we would recycle the window buffers whenever the window the
window is resized.
This, however, is not sufficient to guarantee that the buffers are up
to date, since changing the window border width for example would not
trigger a `WindowResize` (the border being outside the window).
Make sure we recycle the buffers on `SetWindowPixmap` to ensure that
the buffers will be recycled whenever the pixmap size is changed.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
GetShift(int mask) can be called with mask==0, causing
it to go into an infinite loop.
Note: GetShift(mask) will return 0 for a mask of
both 0 and -1. The assumption is that if mask == 0,
then the corresponding bits for which we're calculating
the shift, are also 0.
The Present code sends the idle notification event to the client after
xwl_present_flush returns. If we don't flush our GPU work here, the
client may race to draw another frame to the same buffer, so we may end
up copying (parts of) that new frame instead of the one we meant to.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/835
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Xwayland takes care of not attaching a new buffer if a frame callback is
pending.
Yet, the existing buffer (which was previously attached) may still be
updated from the X11 side, causing unexpected visual glitches to the
buffer.
Add multiple buffering to the xwl_window and alternate between buffers,
to leave the Wayland buffer untouched between frame callbacks and avoid
stuttering or tearing issues.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/835
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add a mechanism to create, recycle and destroy window buffers when
needed.
Typically, this adds a new `xwl_window_buffer` structure which
represents a buffer for a given Xwayland window.
Each Xwayland window has two different pools of buffers:
- The available buffers pool:
Those are buffers which where created previously and that have either
not been submitted to the compositor or submitted and released.
- The unavailable buffers pool:
Those are typically the buffers which are being used by the
compositor, awaiting a release.
Initially, an Xwayland window starts with both pools empty. As soon as a
new buffer is needed, it's either created (if there is none available)
or picked from the pool of available buffers.
Once submitted to the compositor, the buffer is moved to the pool of
unavailable buffers. When the corresponding `wl_buffer` is released by
the compositor, it is moved back to pool of available buffers again to
be reused when needed.
To avoid keeping too many buffers around doing nothing, a garbage
collection of older, unused buffers also takes care of disposing the
buffers being unused for some time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The API `wl_buffer_add_listener` is misleading in the sense that there
can be only one `wl_buffer` release callback, and trying to add a new
listener when once is already in place will lead to a protocol error.
The Xwayland EGL backends may need to set up their own `wl_buffer`
release listener, meaning that there is no way to our own `wl_buffer`
release callback.
To avoid the problem, add our own callback API to be notified when the
`wl_buffer` associated with an `xwl_pixmap` is released, triggered from
the different `xwl_pixmap` implementations.
Also update the Present code to use the new buffer release callback API.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
New now ask Glamor to use EGL_MESA_query_driver to obtain the DRI driver
name; if successful, we use that as the DRI driver name. Following the
existing dri2.c logic, we also use the same name for the VDPAU driver,
except for i965 (and now iris), where we switch to the "va_gl" fallback.
This allows us to bypass the PCI ID lists in xserver and centralize the
driver selection mechanism inside Mesa. The hope is that we no longer
have to update these lists for any future hardware.
If a new rotate buffer was allocated. This makes sure the new buffer
has valid transformed contents when it starts being displayed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
This makes sure any pending drawing to a new scanout buffer will be
visible from the start.
This makes the finish call in drmmode_copy_fb superfluous, so remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Peter Grehan
Gleb Popov
Niclas Zeising
Olivier Fourdan
José Expósito
Michel Dänzer
Kenny Levinsen
Russell Chou
Peter Hutterer
Xaver Hugl
Aaron Dill
Jessica Clarke
Tamura Dai
Jonas Ådahl
Simon Ser
Sultan Alsawaf
Alan Coopersmith
Austin Shafer
Minh Phan
Ivan A. Melnikov
Jeremy Huddleston Sequoia
Joshua Ashton
Jocelyn Falempe
John D Pell
Doğukan Korkmaztürk
Corentin Noël
Shashank Sharma
pkubaj
Lucas Stach
Demi Marie Obenour
Jan Beich
coypu@sdf.org
David Jacewicz
zhoulei
Adam Jackson
Morose
Weng Xuetian
Konstantin Kharlamov
Brian Ruthven
Claes Nästén
Povilas Kanapickas
nerdopolis
Thomas Zimmermann
Andrea Monaco
Sam James
Matthieu Herrb
Drew DeVault
Dave Airlie
Jon Turney
Matthieu Herrb
nerdopolis
Mario Kleiner
James Jones
Patrik Jakobsson
Aaron Plattner
Zoltán Böszörményi
Łukasz Spintzyk
orbea
Zoltán Böszörményi
Daniel Strnad
Lukasz Spintzyk
Erik Kurzinger
Mazlan, Hazwan Arif
luporl
Edouard Gaulué
Pascal VITOUX
Jacob Cherry
Jim DeLaHunt
Misha Gusarov
Julien Cristau
Tony Lindgren
Prabhu Sundararaj
Mariusz Ceier
Kishore Kadiyala
Martin Peres
Greg V
Uday Kiran Pichika
Roman Gilg
Ignacio Casal Quinteiro
Alex Goins
Emmanuel Gil Peyrot
Lyude Paul
SimonP
Sjoerd Simons
Jose Maria Casanova Crespo
Martin Weber
Aaron Ma
Carlos Garnacho
Christopher Chavez
Alexander Volkov
Tobias Stoeckmann
Michael Stapelberg
Yuriy Vasilev
mntmn
Hans de Goede
David Seifert
Fabrice Fontaine
dslater38
Kenneth Graunke